BlackBerry leap speaker crackling and caller voice level is so low even set at the highest level.

Similar Questions

• SOLVED blackBerry smartphones - cannot make outgoing calls. Get two beeps like busy tone with the Koodo Mobile in Thunder Bay, Ontario North

  This has caused me a lot of frustration.

  With my curve when I try to make an outgoing call and I get a busy signal as two beeps repeating themselves.

  I tried everything and the only thing that worked was a security wipe, so losing all my data.

  If I made a backup and restore, the problem comes back. If I restored it selectively through desktop BLackberry, database of the database, the problem returns. Koodo Mobile and Blackberry escalated support was not able to understand this.

  However, through much trial and error, I found that if I limit my identity or turn off the option to show my number in the phone settings, for some reason any he caused this problem.

  So I can't block my identity by using the settings on the phone.

  This can be the result of my location service and the carrier, which is Koodo mobile, in Thunder Bay in Northwestern Ontario that used the TBAYTEL towers for the service, the type of signals technology service. I don't know, and no one was able to tell me why this is happening. I went to 6 months not being able to make outgoing calls without losing ALL my sms, contacts, BBM, TXTs, bookmarks and other personal data. Only a security wipe would allow me to make a call - until I have activate the restrict my identity and activated the show my number option.

  SO - I hope this helps other users. I've been through three phones, thinking that it was the material problems.

  It's a kind of crappeh because I would not block my identity with a few calls. So with the curve BB on Koodo to Thunder Bay, I can't do that. I have not tried outside the Northwestern ONtario, but it will probably be the same, unless I am out of service TBAYTEL area.

  Such is life. Live with it.

  Difficulty easy but unsatisfactory.

  I ' lll this post in the Forum of Koodo so when one exists.

  See you soon!

  I did these steps including restore each database one at a time with the same results. I can do a full restore and the remains of the issue until I set restrict my identity forever AND Show My Number Yes. I also did all of these steps with the any other BB Curve 8530 and it seems to happen every ih in this area.

  I found the work around but it would be good to know why and if this happens outside the TBAYTEL towers that Koodo Mobile uses throughout Northern Ontario to the Ontario-Manitoba border in the West, to the North of Hearst and East of Sault Ste. Marie.

  If there are a Koodo Mobile, users who have a BlackBerry Curve 8530, I'd like to hear you just what I see if it is unique to the service provider, hardware, software and network type, geographical location, etc.

  Any comment is appreciated, as support Koodo and BlackBerry have been baffled and couldn't solve this problem and I hope that others find it so that they can save months of time and frustration, I have lived.

  See you soon...

• Even though I have my Windows Mail spam set to the highest level, I continue to receive unwanted emails. For some reason any Windows Mail does not block them. How can I fix it?

  I have my blocker spam Windows Mail, the highest value which means I should only receive emails from my contacts.  Despite this, I continue to receive unwanted emails.  This has been so since I've upgraded to Windows 7.  I even went now install a machine program washing 'spam' which was a disaster as well.  I get about 4-5 spam emails a day - usually when I start the morning.

  How can I solve this problem?

  What Windows Mail in Vista or Windows Live Mail in Win7? If it is a POP3 account, you can filter your messages by using message rules. This is for Outlook Express, but it works the same either of the programs.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

  Be sure to see these links for more options.

  A few tips:
  http://insideoe.tomsterdam.com/tips/rules.htm

  Message rules does not? :
  http://www.insideoe.com/FAQs/why.htm#rules

• Smartphone blackBerry, deletion of texts and call log

  I got my bb pearl 8100 during approximately 8 months and so far it's been great.  in recent days it has been automatically delete my texts and mms as well as my call connect.  I removed the battery for a few minutes to reset if all goes well.  I also double checked the settings and remove selected 'never '.

  does anyone else have this problem?  all solutions?

  Thank you!!

  Hi and welcome to the Forums!

  Your timing is excellent! I just did a search for this from another user on another area of this forum. Here's what I found:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB14213&SLIC...

  I hope that helps!

• Curve Smartphones blackBerry, loss of messages and call history

  I have a 08310 which has worked fine since O obtained (~ 2 months ago).   Yesterday I selected messages and a lot of messages was gone - nothing as simple as all messages before a date missing speciifc - many since that day and a lot of old, some were SMS, some were emails - from several hundred, I found myself with about 30!  Also the call log was gone and the phone seems to be running slower than before (lots of hourglass).  Today she again lost several messages and deleted call log.

  Turned off/on power no joy. Remove and don't replace the battery no joy changed the themes once again no joy.  The slow running seems to have improved, but I have no idea where my messages go and have no idea if this happen. Don't know about you but I lose confidence when such things happen.

  No one knows what could be causing this and how to prevent it.

  Phil

  Hi, glad to see the number to about 50%,

  You should be good to go!

  Some versions do not have the memory manager, you default on your device, you are!

  Also counsel, before doing backup and synchronization, make sure that your memory is in good shape,

  It will reduce the problems.

  Thank you

  Please take a few minutes to solve the thread, OK?

• An update has been installed on my desktop pc and now it won't let me even get in the log on screen. Help, please!

  My mother the automatic updates on the pc and something has updated this morning when my mother was shut down the pc.  I turned on the pc and it was a black screen and it looked like he was running through a few things.  Then it stops on the following message

  !! 0xc01a001d! 9499/97970 (\Registry\Machine\COMPONENTS\DerivedData\...)

  There is nothing to click on or go back.  The screen just stay on it.

  Can someone help me; (a) help me to fix this so I can use the computer, then b) tell me what it is that it has caused in the first place.

  I would be really gratefull for any help that anyone can give me.

  Thank you very much!

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  This article lists some recovery options.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• No sooner, I get up and ongoing enforcement, when my computer needs to "Set up the updates" don't shut down computer! And then it's 'Shutting Down' that takes forever. Help! Is it possible to stop this configuration? What is it? I need.

  stop the configuration on my computer

  Hi booklubber,

  Thank you for visiting Microsoft Answers.

  As these updates are very useful for your operating system works better, you must update these updates on your computer
  1. download these updates on your computer.
  2. try to install.

  If this is not possible in normal mode, then place the clean boot computer and install updates.

  To perform a clean boot on a computer that is running Windows 7, follow these steps.

  1. click on start toreduce this includes this image, type msconfig in the Search box and press ENTER. Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the Load Startup items check box.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click disable all.

  5. click on OK.

  6. When you are prompted, click restart.

  7. after starting the computer, install the updates.

  If this does not work, try to reset the windows update components.
  1. click the button to fix in the following link: http://support.microsoft.com/kb/971058
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  Note this fix it Solution has two modes by default and aggressive. You must run the fix it solution in default mode and determine if it solves your problem with Windows Update before running it in aggressive mode.

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I connect to outlook and put my email address and full security in when I disconnect and reconnect I must sign in everyntime even after checking the box to keep me connected?

  e-mail Outlook for windows 7does won't keep me signed in, I save my e-mail and security question to keep me signed in but after that I have close and open later he always wants me to re sign in? ... Joseph thanks, even after signing, constantly checking the box to keep me in...

  Hi Joseph,

  1. what browser do you use on your computer?

  2. is the specific question to Outlook.com or all web mail?

  I suggest you follow the steps described in the link if you are using Internet Explorer and let us know the State of the question below.

  Automatically fill in website forms and passwords:

  http://Windows.Microsoft.com/en-in/Windows7/fill-in-website-forms-and-passwords-automatically

  I hope this helps.

• Can view is no longer with the new (and unwanted) PDF Adobe Acrobat Reader DC even after following the troubleshooting instructions

  This Adobe Acrobat Reader DC showed during an automatic update when I shut down my computer and I hate it.  I can no longer display PDF who have never been a problem with the old Adobe Acrobat I got.  I read the troubleshooting instructions to know how to solve this problem, but they have not worked.  Only instructions I saw started with "right click on the PDF... How can I do that when I can't even SEE the PDF file?  I'm not a person tech (strictly point and click on) so it's more frustrating for me.  When I scan something, which I do a lot, now I have to go through this stupid thing of cloud and he infiltrated everything I never scanned and saved.  I'm nervous about uninstalling this unwanted program because I don't want to aggravate the disorder.  I just want to be able to view and print PDF files as if I were always able to do before.  Suggestions (preferably some that a jerk tech like me can understand?)  Thanks in advance for anyone who has got an answer.

  Hi Dana,

  Yes, you were pretty close while answering my questions.

  Another question: when exactly you get this error message? While opening a specific pdf file or using the functions specific to the reader?

  Insofar as troubleshooting is concerned, I recommend you to use on your system cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  and later reinstall reader by using the following link: http://get.adobe.com/reader/enterprise/

  Kind regards
  Rahul

• OsCustomizationSpec and OSCustomizationNicMapping they are a good way to set up the new virtual machine for the model

  I build a script to generate auto magicly VM when I have import information from a csv file. I have the latest PowerCli, I am trying to build servers r2 Sever 2012 model.  I tried several OsCustomizationSpec (OCS) of in the hope of getting something to work, but I had no luck so far.  In VCenter, it shows that it applies the OCS, but is not apear to have an impact on the server.  I have disabled UAC since the last time that I tried it so maybe that will make a difference.  I am under ESXi 5.1 update 2, just to try to give all the necessary information.  Ideally, I'd like Sysprep, the value of intellectual property, change the computer name and join the server to the domain.  That's all! lol I have the book "VMware vSphere PowerCLI Reffernece, automating vSphere Administration, I walked through step by step.  The new version of PowerCli seems not have the x 86 limitation as earlier versions of PowerCli.  I tried so many different things, I'm not sure what to put in place as a starting point.

  # Save the object credentials with permission to join the domain.
  $DomainCredentials = get-Credential "domain\testername."
  # Clone our Spec by adding the domain information.
  $Spec = get-OSCustomizationSpec "Windows Server 2012 R2"
  $Spec += get-OSCustomizationNicMapping - Spec $Spec
  #$Spec | Select *.

  # Get our VM
  # Change network settings
  Get - VM BigServername | Get-NetworkAdapter | Together-NetworkAdapter - NetworkName nic - 172.16.25 - VLAN225 - connected: $true '
  -Confirm: $false | out-null
  # Close the comments to make change.
  Stop-VMGuest - VM $VM - confirm: $false | out-null
  # Wait while feedback stops
  While ($vm. ExtensionData.Runtime.PowerState - not "poweredOff")
  {
  Start-Sleep - seconds 1
  $vm. ExtensionData.UpdateViewData ('Runtime.PowerState')
  }
  # Apply Spec customization to apply the new network settings
  Get - VM "BigServername" |
  Set-VM - OSCustomizationSpec "R2 Windows Server 2012" - confirm: $false |
  Start-VM

  I can rebuild the model, or something else, we must do this work.

  OR - is simply not the best way to configure the VM?  If not, what Sysprep?

  Good news, but first, I would really like to know where the log files are on which server to the OsCustomization process.

  I decided to reverse engineer and create a CSOS within vCeneter and once I got to work, I kept creating new CSO via PowerCli until I could get that to work, create a new virtual machine.  Once I got this to work, I have tryied to apply on a cloned vm, with no parameters. I got it works too.  I tried to go back to my original image, but I couldn't get this to work.  Something's wrong with this picture.  He wrath that the problem was related to the permissions on the local client.

  New OSCustomizationSpec - OrgName company OSType - Windows - ChangeSid-Server "vcenter.dom.com" - name PowerCliOnly4 - persistent administrator-Type FullName - AdminPassword! password123 - zone "Eastern (USA and Canada)" AutoLogonCount - 3 - domain dom dadmin - DomainUsername - DomainPassword! password123 NamingScheme - vm-Description "PowerCli Use only" - confirm: $false

  Get-OSCustomizationNicMapping - OSCustomizationSpec PowerCliOnly4 | Game-OSCustomizationNicMapping - Position 1 - IpMode UseStaticIP - IpAddress 10.10.10.98 - 255.255.255.0 - DefaultGateway 10.10.10.1 Dns subnet - mask "10.10.10.10","10.10.10.11" "-confirm: $false

  This seems to be very picky.  Because the area is one of the parameters, you cannot put it in the DomainUsername, no dom\dadmin. The part that I really want to know how to get more, is what happens if your vm has a different local administrator as the administrator account.  It turns out that FullName - is not the account that it to connect locally with tires. When I created the vCenter Medtronic Chondroitin, I put 'me' in the name and information of the Organization and that's what was settled in the FullName property:

  Name: PowerCliOnlyM
  Type: persistent
  ServerId: /VIServer = dom\[email protected]: 443.
  Server: vcenter.dom.com
  LastUpdate: 24/09/2014 13:33:19
  DomainAdminUsername: dadmin NO dom/dadmin here!
  DomainUsername: dadmin
  Description: PowerCli use only, done manually in vCenter.
  AutoLogonCount: 3
  ChangeSid: true
  DeleteAccounts: false
  DnsServer:
  DnsSuffix:
  Domain: vsi
  Full name: me
  GuiRunOnce:
  NamingPrefix:
  NamingScheme: Vm
  OrgName: CompanyTU
  OSType: Windows
  ProductKey:
  Time zone: (USA and Canada)
  Working Group:
  LicenseMode: NotSpecified
  LicenseMaxConnections:
  EncryptionKey: {-126, 3, 48, 108...}
  ExtensionData: VMware.Vim.CustomizationSpecItem
  ID: PowerCliOnlyM
  UID: /VIServer = vsi\[email protected]: 443/OSCustomizationSpec = PowerCliOnlyM /.
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  AdminPassword: w
  DomainAdminPassword: N
  DomainPassword: N

  DNS: {10.10.10.10, 10.10.10.11}
  Wins                  :
  SpecId: PowerCliOnlyM
  Spec: PowerCliOnlyM
  SpecType: persistent
  NetworkAdapterMac:
  Position: 1
  IPMode: UseStaticIP
  IP address: 10.10.10.98
  Subnet mask: 255.255.255.0
  DefaultGateway: 10.10.10.1
  AlternateGateway:
  VCApplicationArgument:
  ID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  UID: /VIServer = dom\[email protected]: 443/OSCustomizationNicMapping = OSCustomizationNicMappingImpl-PowerCliOnlyM-persistent-1.
  ExtensionData: VMware.Vim.CustomizationAdapterMapping
  Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient
  Version: 1

  I think that it is good to know that the virtual machine reboot 4 or 5 times as it goes through this process.  It breaks is you try and do something for the virtual machine that interrupt the process.  I don't know that I'll think more questions in a second.

  In addition, it cost he had some problems with the put between quotation marks, single or double around the password, but I did not check this again, I just know that once I took them, he began to work.  I ran on other issues while testing as I was using a single IP address, so if I do not disable the test VM, the following would not work because of the conflct network, maybe I shouldn't admit that... lol

• The habit of my blackberry curve 8900 blackBerry smartphones let me call or text or receive them or go on the internet

  My blackberry 8900 curve let me call or text or receive them or go on the internet, when I go to call same o2 hotline he does not sound or anything it's just the call know fact any1 no what it is and how I could fix it... Please help

  Thank you xxx

  Hi and welcome to the Forums!

  The most basic level of service is what you're missing... call base. You need to talk to your carrier why your unit is not active on their network.

  Good luck and let us know!

• BlackBerry Smartphones Major Lag and related problems

  I currently have a Pearl 8120, and lately I've been major lag problems. Every day, I try to open a BBM conversation with one of my friends, and I get the hourglass for several minutes (I've not timed exactly, as often happens while I'm at work and I can't afford to stay around with a useless phone for so long). Sometimes it doesn't go away, and the conversation never opens, so I have to take out the battery at least once a week now, I've never had to before. Is there a reason that this is happening? I usually have only a cat that is already completely full, I have little contact, and I'm not in a group. This also happens with other applications such as web browser or Mobile of Score, but usually the gap is not as long.

  Since I got out the battery so often now, I have some other questions:

  1. is there a way to permanently remove items of service book? There is no way I'll ever need of Google Talk or AIM or any of these links on my phone of sites, they are just a waste of space for me, but now I have to remove them whenever I turn on my phone.

  2. once I put my battery back in, I usually go to clear certain texts to save space, and part of the oldest day text is deleted. Only my sent texts appear. But curiously, not worth even of a whole day texts that is deleted, it just seems to be a random selection of texts of weeks.

  Sorry if all is not clear enough. Seriously, I appreciate all help.

  Hi britishenglish,.

  Welcome to the BlackBerry Support Community Forums.

  Looks like you are low on memory of the device. This article should provide more information but also help to optimize the memory of your device. http://bbry.lv/9InIpF

• Use fault strategies to get the input variable and call a new service.

  Hello

  I have 2 composites that are the answer to the request. If none of these composite gives an error I want to have policies to correct this fault. Is possible to obtain the input of the first variable composite and call a new service with this variable to handle the error?

  Thank you

  Daniel

  I found the solution here:

  With the help of mismanagement in a BPEL process

  Using the method getVariableData to get the variable I want.

  Kind regards

  Daniel

• vCenter alarms and calling a powershell script

  OK, I'm missing something or I'm doing something incredibly stupid.

  I created a simple powershell script that starts a pre-defined VM. I tested it in PowerGUI, it works fine, no problems so far.

  Now all I want to do is set an alarm to ANOTHER VM of vCenter, such that if the virtual machine goes down (power of the off state), the script above is called and "failover" VM is started.

  I set up the alarm with a "run a script" action, the script is: "C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe C:\SCRIPTS\FAILOVER.ps1" (including the quotes).

  And you guessed it: the script does not run. I'm sure that it doesn't, because the part of the script creates a log file, and this file is not creaed (it IS created when I run the PowerGUI script).

  What I am doing wrong? How can I get the alarm to hit my script?

  Thank you!

  I've never managed to run a PS script this way or the other.

  But I found a workaround.

  You can start your PS script indirectly via a BAT or CMD file.

  That's what I set in the value field

  c:\windows\system32\cmd.exe /c c:\Scripts\alarmscript.bat
  

  And the BAT file contained this

  C:\WINDOWS\system32\windowspowershell\v1.0\powershell.exe -PSConsolefile "C:\Program Files\VMware\Infrastructure\VIToolkitForWindows\vim.psc1" -Command C:\Scripts\Test-Alarm.ps1
  

  In the example script I used

  Get-VIToolkitVersion | Out-File "C:\Scripts\PSOut.log" -Append
  Get-PSSnapin | Out-File  "C:\Scripts\PSOut.log" -Append
  

• Display of Windows Vista, the icons and all THE GRAPHICS suddenly pixelated, appear low quality at the highest resolution and colors

  Please help, out of nowhere on my screen - background, all icons, all graphics (including the Explorer and other programs) have become rough and pixelated and seem very low qualty even if my display is set to the highest resolution management settings and color. I've not been able to find a way to restore and have no idea why it is doing this in the first place. It's really bothering me, it's hard to read (text appears fuzzy and broken up, not smooth and sharp, icons have white or another pixelation around them and do not have the 'look of glass'.) I was wondering if one of the old games my children changed my settings somewhere but I've lived every control panel I find and have not been able to correct the problem.  Even the buttons (back, forward, refresh, etc.) in Explorer have bad pixelation. That's happened? Help! :) Thank you

  I would also update the drivers, firmware or software for your monitor at the same time.  Also, if you have another monitor, swap them to see if the problem goes away or moves - then we can pretty much reduce the question to the screen and not the video card (and if the updated drivers do not resolve this problem, then it's a hardware problem and you can either take a workshop of computer service repair or simply a replacement of purchase screen.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.