BlackBerry Passport keep the load after 100%

Similar Questions

• Windows XP I often setup.exe keeping the CPU at 100% for at least a few minutes.

  Running Windows XP, I often setup.exe keeping the CPU at 100% for at least a few minutes... this process can be completed or ignored?

  "Setup.exe" is a generic term used by many applications.  The short answer is 'yes', it's OK to complete the process, but you really need to know what it is and why it continues to run.

  You probably need to download, install, update and run these free malware scanner (not at the same time):
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  If that is not fix things, and assuming that this process begins when you start the computer, download, install, and run Autoruns.  When Autoruns has finished scanning, click the 'Connection' tab and look for the line that contains "setup.exe".  You can just uncheck the box on the left, or remove the item, which will prevent the routine of starting when Windows starts.

  Preferably, however, you should look at the path containing setup.exe where you should be able to deduce what application is trying to set itself up.  You can then take the appropriate measures, which may be simply delete the folder that contains the file.  Note that if you delete the file, you must ALSO remove the line in Autoruns, otherwise you will get a "file not found" error every time Windows starts.

• BlackBerry Passport wifi connection problem after password change

  I changed the password on a Wi - Fi device and since then could not connect my passport to this access point. Have you tried the wps process also without success.

  Thought maybe I could delete the old profile registered, restart and after finding the unit once again, perhaps that would accept the new password.

  I don't see how to remove the original profile.  When trying to update the password, get a message that the profile cannot be added.

  Click on the link below to delete the backup Wifi network on your Passport.

  http://help.BlackBerry.com/en/BlackBerry-Passport-series/current/help/mes1334606818545.html

  Good luck!

• analog output while keeping the value after the program

  I use a USB 6001 output a simple analog voltage. Right now I'm still in the process of experimenting to see how to control my blood pressure when I noticed that, after I complete my program, data acquisition is always show the last analog value.

  My VI is attached. I use the stop and remove commands at the end of the program so I don't understand why he continues to keep the last value. I used a breakpoint, so I know that program happened to stop and clear commands.

  How to exit back to 0 when I close the program, assuming that there is some other way than the writing of 0 at the end of the program.

  I did not find the related items, but if it don't just answer with a link.

  I thank very you much for any assistance.

  Tommy

  The DAQ hardware is supposed to retain the last value so write a 0 before deleting the task is the right method.

• Composition of blackBerry Smartphones remove the 0 after country code

  Hello

  When I try to call my blackberry to Itlay (00390131XXXXXX) dial the number without the 0 after code country (+ 39131XXXXXX) and of course the number is not because it is a mistake.

  Does anyone know the option to remove this property?

  Thank you

  Luke

  Welcome to the forums.

  Check the smart dialing properties, you have put in place.  Click on the Phone/Call Log icon, then go to Options-> Smart Dialing.  There are some predefined numbering set up there rules that you may need to change.

• How to keep the metadata after Correct camera distortion filter?

  Hello

  Anyone know how to keep the metadata information after you have used the Correct camera distortion filter?

  In other words:

  When I need to correct the photo with good camera distortion to the menu Filter option I can't keep the metadata to the final table.

  After correction, I cut the useful part with the rectangular selection tool, and then I chose the file, new, Image to the Clipboard.

  Either the format file that I choose to save the metadata information has disappeared.

  I tried to export the metadata from File, FileInfo, information, and then import the metadata (XMP file) but no result.

  Someone at - it an idea to solve this issue

  Thank you

  This is probably because your using the Clipboard that discards the data.

  Try to crop your photo and recording. You can always cancel the harvest after saving if you want to do something in the photo.

• Keep the focus after the validation and alert error

  I have a code that works as I want with a glitch. The alert works when the character count in incorrect, and it keeps the focus on the field. The problem is that once the correct number of characters is entered in the field, he keeps emphasizing the field until you tab out of it.

  I need it to work as it does, with the exception that when the correct character number is entered, he needs to go to the next field automatically.

  If the alert is removed, it works correctly, except, of course, I do not receive the alert. Here is my code.

  
  var r = new RegExp();
  r.Compile ("^([0-9]{8})$", "i");

  var result = r.test (this.rawValue);

  If (result is true)

  true;

  on the other
  App.Alert ("the SAP number is 8 numbers. Please re - enter the SAP number. ", 0) ;
  xfa.host.setFocus (this);

  Thank you

  You must add the braces to the other. Strapless, it executes only the first statement so setFocus is still running. As usual I use braces on all if-else statements.

  If (result == true) {}

  true;

  }

  else {}

  App.Alert ("the SAP number is 8 numbers. Please re - enter the SAP number. ", 0) ;

  xfa.host.setFocus (this);

  }

  Steve

• My 9380 curve blackBerry smartphones keeps restarting even after work in coursIn and remove all installed applications

  My curve bb 9380 keeps restarting after several minutes even after I wiped and deleted all installed applications. It has also become slow when downloading

  Hello kashez

  Welcome to the Forums of the BlackBerry Support

  If you have already removed all apps and you camera rebboting on its own, then you should try a refill of OS to rule out any software problem, have you tried?

  KB11320  : How to perform a reload own BlackBerry Device using BlackBerry desktop software for windows software

   

  But first make a comeback.

• Tethering bluetooth with Macbook Pro-, I can keep USB plugged after 100%?

  Hello

  I just got the z3. I noticed that when sharing the spot with my Macbook Pro 13, battery pretty quickly, even if I turn it on to 3 G. So I started tethering with my Bluetooth instead, because I heard that drains the battery a little less.

  My first question! Is the above correct?

  My second question - if I connect the z3 to my Mac via a USB (loading in the process) is allowed to leave the z3 connected once it reaches 100%, or do I have to unplug the unit and let it do more cycles?

  I know that the Mac will stop once it reaches 100% charge, but continue to use power - the z3 doesn't do the same thing, to protect the battery and to avoid overloading?

  Thanks a lot for your help!

  T

  Hello and welcome to the community!

  You will probably see a lower battery use when you tie over bluetooth instead of WiFi.

  The phone will stop charging when the battery is full, so you can leave it connected.

• BlackBerry Blackberry Passport blocking the country?

  I'm from South Africa, but working in southern Sudan. Arriving here my Z30 could not connect to the world of BlackBerry. I suspected the unit and upgraded to a passport. If same problem. I work for an ISP here and know that we're not blocking anything. BlackBerry block some services in southern Sudan?

  Hi, John. There is no block of the Government no doubt.

  South Sudan was part of Sudan until 2011, when they became independent. There are sanctions against Sudan, but none against the South. But not all companies know or have updated their policies.

  We had a problem a year ago with Adobe, but once it has been dissipated, the problem of access to their sites has been resolved.

  However, I have no idea who to contact at the BlackBerry, in this regard.

• All new Iphone 6s do not keep the load.

  I bought the new IPhone 6 s today two weeks ago. I'll have to charge at least twice per day, within a period of 10 hours. I was told when buying I could get 17 to 24 hours autonomy. I'm not running several apps and do not keep a bright screen.  How can this be repaired?

  Before he can be 'fixed', the question must be identified. Go to settings > farm and see which application uses the highest percentage of your battery. You will also need to look at this other parameters you turned on and determine how you use the device.

• How to keep the info after you start again?

  Hi all

  My collection has grown exponentially over the years and even though I think I have very organized, which is not the problem, I would like to start fresh and enjoy music that I might have forgotten for a long time among all the clutter.

  I have iTunes game, and I recently added Apple music.

  Now, what I would do is, remove everything from my iTunes library, and slowly adding the albums I really need. Listen to them. I don't know that I'll know if something does not part. I have already printed a PDF with all the music that I currently have in iTunes, so I can easily put all back if I want to. But I'm a little afraid to do. Mainly because I can't understand the following:

  1 - there are a few bootlegs in my iTunes library, and those who are not available on the Apple's music. Since I Match iTunes, if I remove the said albums in my library, iTunes locally is there way to recover from iTunes game I?

  2. I want to keep all of the data associated with my albums. I mean, I wouldn't lose information as the number of times each piece was played, ratings, etc. Say I have remove an album from the library. When I decide to bring him back, is there a way to bring also said information about this album?

  Thank you very much for all the info you can share!

  Rather than cite the game as your source of replacement (and there are several reasons why even if you think it is, it isn't) you simply need to use an external drive to store things temporarily.

  Some metadata is stored in the files themselves and restored when added (except WAV). Play counts, ratings and added are all things only stored in the library file. Once removed from the library their values no longer exist when added.  There are solutions for the sides and even added, but both are pretty messy and only if your life revolves around these values.  I don't think that there is a way to play edition account.

• Parameters of system tray icons keep the reset after reboot

  Hello

  My system tray icon settings are lost whenever I restart my laptop.

  I tried to reset all settings, I tried to install the experimental fix Windows6. 1 KB979155-x 64.msu nothing works.

  I also tried the following registry settings that now I have no more than two keys mentioned and I do not know if they had to be re-created after I cancelled them.

  1. Click Start , type regedit in the Search box and press ENTER.

     If you are prompted for an administrator password or for confirmation, type the password, or click allow .

  2. Locate and then click the following registry subkey:
     Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER
  3. In the Details pane, click the IconStreams registry entry.
  4. On the Edit menu, click delete , and then click Yes .
  5. In the Details pane, click the PastIconsStream registry entry.
  6. On the Edit menu, click delete , and then click Yes .
  7. Exit Registry Editor.
  8. Restart the Explorer.exe process. To do this, follow these steps:
     1. Press CTRL + SHIFT + ESC.
     2. On the process in the Task Manager tab, click the process explorer.exe and then double click on end process .
     3. On the file menu, click new task (run) , type Explorer and click OK .
     4. Exit Task Manager.

  The only option is either to have all the icons in the sawn system tray which takes 3\4 of my task bar or do them all hidden which is a pain in the neck because I have to open the "new taskbar" every time.

  I hope someone can help me.

  Thank you :D

  Hello

  As you have removed the registry keys, I recommend you to run a system restore to restore the work correctly the settings.

  Note: You must first create a restore point on your computer to do that you must follow the steps below.

  1. open the control panel (all items view).
  (A) click on the system icon.
  (B) proceed to step 3.
  or

  2. open the Start Menu.
  (A) right click on the computer button and click Properties.
  3. click on the System Protection link.
  4. close the system window.
  5. check to make sure you have System Protection turned on for the list available on the disc, that you want to create a restore point, to include in the restore point.
  6. click the Create button
  7. enter a description to point restoration in order to recognize it when you do a system restore and click on the button create.
  8. you will now see this as the restore point is being created.
  9. when the restore point is finished being created, click on the close button.
  10. click on OK.

  Follow the document below for additional guidance on the creation of System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point

  After completing the steps above, you will need to follow the instructions below:

  1) click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  (2) in the System Restore dialog box, click on choose a different restore point and then click Next.
  (3) in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4) click Finish.

  For more information, see this link below.

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  After you perform a system restore, follow these steps below to configure the icon settings according to your choice.

  1. click on start.
  2. tap icons customize.
  3. click on customize icons in the taskbar.
  4. click on turn system icons on or off.
  5. place the icons you want on.
  6. click on ok.

  Note: Make sure that the behavior for the selected icons is set correctly, and then click OK.

  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem of blackBerry Smartphones from the homescreen after update

  I've updated my device software. After update when two or more new messages appear on the home screen, I see only the first line of messages. I write a mention to @BlackBerryHelp but nobody don't answer my tweet, so I tried to send a direct message, but it's impossible because I can send direct message to my followers. I add a screen grab to my tweet, also I add Marmotta here (bottom).

  the current version is 6.0 Bundle 2949

  

  Have you tried a battery pull?  Can you delete or mark them as read and see what is happening on your next series of messages?

• Problem blackBerry Smartphones: keeps the switch between the headset and speaker

  Hey guys, I'm new here so I will try to provide everything I can. I have a Bold 9700 with ATT and the OS is v5.0.0.405. Well a couple of weeks my blackberry has started to develop an annoying problem. When in a call, most of the time (not all) he starts switching between icon of headset and normal speaker. When this happens, you can hear the phone switch between the two through the speaker, and it makes it so I can't hear someone and they don't hear me. I'm out of my warranty of 30 days of ATT, but I think im still well within the warranty of the RIM. I admittidly dropped, but this should not happen. Nothing like this has happened to any other phone I've owned. Is this what can I do to get some sort of replacement?

  Thank you!

  shigity wrote:

  Is this what can I do to get some sort of replacement?

  Thank you!

  All services, warranty or otherwise, is provided by your operator and will be carried out in accordance with the contract you signed with them. Go see them.