BlackBerry Q10 Q10 - black screen after using the Holster

Similar Questions

• Black screen after using the popular repair disk.

  I have a Dell Latitude D620 XP with SP3.  I installed a utilityAnd repair/tune-up that seemed to go well. Then several hours later, I found it with a black screen and it will not get after the BIOS loading before the black screen drive hard light Charlotte.

  I tried to start safe mode, and the hash of the path works in only about halfway to the bottom of the screen. I tried disable automatic reboot, then Safe Mode w / networking. still stuck... I use another dell latitude which has its own problems.

  He was left in the repair shop for 10/11 with windows files corrupted and missed all of the updates. When the community hands me the answer to my loop of black screen on the xp operating system, because I am sure they will be, I'll get into trouble I have with the machine running Vista.

  There is a relevant reason to denote the unit D630 Vista OS. I had exchanged batteries because the update of flash plaqyer needed a good battery to install successfully, and vista units battery will not take a charge.

  .

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Do you mean that the battery of your laptop Windows Vista does not load?

  Response with above information to better help you.

  I suggest you to follow the steps in the link and let us know the State of the question:

  http://support.Microsoft.com/kb/314503

• HP Pre 3 - black screen after using the phone

  Hello

  That happened a few times before.

  It works in the way that all of a sudden my phone does not the keyboard cursor or button up to turn the screen.

  I have to remove the battery and start again to respond again.

  Tonight, I got an updated via the Update Manager and installed, something 2.2.0.x.

  Now, if I call a number that forces me to use the keyboard to make choices, I am unable to use the screen.

  I can press numbers using the keypad, and after the call - the screen is black and does not respond to what it is.

  I also have to reset my phone again to make it work.

  Any suggestions?

  -BR

  Solution: http://forums.precentral.net/palm-pre-pre-plus/204001-blank-screen-during-calls.html

  It happens because the screen protector that comes with the pre 3 is of poor quality and mess up the proximity sensor.

• J5B54EA #ABU: help black screen after put the password in

  I turn on my laptop and everything is normal until after I type my password and it is supposed to go to my office instead it goes straight to a black screen, I can not access my Start menu ive had the laptop 4 months on its never had any problems and was working fine an hour ago

  Hello

  Try this and let me know.

  Boot the computer normally and log.

  Black screen, hold down the ctrl and alt keys and press delete.

  Select Task Manager.

  At the bottom left, select details (if it is not already selected).

  Click in the header of column Nsoul to organize the processes in alphabetical order.

  Look for an entry called to run once Wrapper (RunOnce.exe) - If you see it listed, right-click on it and select end task.

  The office is now show?

  If this is the case, download Autoruns on the following link and save it in your downloads folder.

  http://download.sysinternals.com/files/Autoruns.zip

  When you have that, open your download folder, right-click on the folder zipped to Autoruns, select "extract all...". "and in the next window, click Extract.

  A new window will open displaying the extracted content.  The application you must launch is the 2nd in the list (in format autoruns 636ko) but this by right clicking on it and selecting 'Run as administrator' -click 'Yes' to the uac prompt.

  Scroll down the list until you find the entrance to RunOnce (it may well be 2 entries) and Remove the tick (s) in the box next to it.

  Restart computer and see if it boots now on the desktop.

  Kind regards

  DP - K

• Black screen after entering the password to open Windows Vista

  I need help for vista windows Desktop to appear. All I get is the black screen after I get my password

  Aziz I apologize not responding earlier! In fact, I had to do was reboot the pc! I wish I knew exactly what it was that I did!

• Black screen after opening the software of the camera on Satellite P200 - 17 c

  Hello

  Recently, I used my Vista recovery disk. Everything was ok after the installation at the time wherever I tried to use the camera. When I open the software, the screen on chicony camera assistant software was black and there was nothing on it. I tried to install the new drivers, but it remains the same. Then I tried to record and take a picture of me. When I opened the video and photography, it was ok and I see myself.

  Can u please tell me what to do?
  Oh yes I forgot to mention this: I open the yahoo Messenger. There, I also tried the camera and I saw myself but not on the camera software that comes with Toshiba. I also tried to use the camera in windows live messenger, but the Messenger always stopped working.

  Thanks in advance
  What about z

  Hello

  Have you tried to use the cam without the MS Messenger, Skype or Yahoo messenger?
  Please it!

  Reboot the machine, but don't load the applications mentioned at the beginning.
  Then test the webcam software again.

  I had a similar problem with my internal webcam. I couldn't t start cam because Skype has locked.

  Check this box!

• Black screen after using Recovery CD - Satellite A60

  Hey,.

  After a few Virus attacks, I tried to format my Toshiba laptop HARD drive and to install Windows XP Professional (normally a family license for XP Edition).
  Everything was good, but I couldn't install some drivers (display, WLAN, Ethernet LAN...).

  That's why I tried to use the recovery discs. But after the recovery has been completed I should replace the disk and restart the system. After the restart there is a black screen and nothing happened. Now, I have a problem. Why the laptop does not start after the recovery process.

  Are there important invisible files on the hard disk, which could have been deleted when I tried to remove the HARD drive and install Windows XP Professional?
  If so, how can I get back those files?

  Hello Phillip

  > Why the laptop does not start after the recovery process
  It is a good question. On the HARD disk, you will find the image of Toshiba and this image is placed on the Toshiba Recovery CD. As you see it the laptop should load and initialize correctly after recovery. Nothing was concealed on the internal HARD disk

  What is the Toshiba screen appear early initialization? You see nothing?
  If not I would not recommend removing the battery and unplug the AC adapter.
  Wait 15-20 min and reconnect the pieces.
  Then try to start the laptop.

• Half rest black screen after removing the update

  Hi, I'm very inexperienced that I just took in video editing so bear with me when I don't know what to do.

  On a recent thread, the cause of the upper part of the screen is black has been on a Microsoft update, I had removed the other day and correctly solved the problem.

  However, after opening the program (Adobe Premiere Pro 2.0) today I imported a file into a new project that resulted in half top in black again. Yes, my files are in WMV, because I am just a YouTuber and the format fits to my basic editing and shooting very well (I've seen a lot of arguments about how "dumb", it is to use this format) and this is what format my camera braces on. I made sure the update does not occur, but the question is back. Help?

  -Katie

  the 1st forum for Agency 2 http://forums.adobe.com/community/premiere/premierepro_previous?view=all

  2nd, search for Microsoft http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

• Re: Blue screen after using the Qosmio F10 recovery CD

  Hello

  I tried to use the recovery CD (XP) for my fathers Qosmio F10. I chose option 1 to return to the factory default. It seems to work fine but after it's over he says remove the CD and reboot I did. It was then restarted but flashed a blue screen for a split second before restarting. I did not see what is the Blue error screen, as it flashes up too fast. Then, it takes me to the configuration screen and asks me to choose whether to start Windows normally or SafeMode etc. All options give me the same result.

  He said if I choose to boot to the last known good configuration:

  "windows was not start because the following file is missing or damaged:
  \WINDOWS\SYSTEM32\config\SYSTEM

  You can try to repair this file by starting windows setup using the CD-ROM Moose
  Select 'r' in the first screen to start repair. "

  Of course, I do not have an original Windows CD, I just the recovery CD.

  I checked to spit on the disc but its perfect.

  I have a complete backup of all of the HDD on an external USB disk if that would help?

  Don't know what to do next?

  So just in the summary;
  You have checked the RAM, HARD drive and tried to install the Windows operating system several times but without success

  Well, maybe you should try to boot from a Linux live disc to check if the BSOD appears again?  :|
  How about Windows XP installation by using the diskette in MS Windows.
  It s worth a try

  Last but not lease, you will need to replace the memory modules RAM and HARD drive
  I mean the different HARD disk and RAM tests are useful, but it will not replace tests using new parts
  I think that this should be done by a qualified technician because he could test it before buying spare parts

• Satellite L350D - 11K: black screen after downloading the Tempro updates

  Hi Forum,

  yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.
  During the last update, it was an update of the firmware, the system crashed, and it no longer starts.

  After removing the battery, the system starts up, but now it has a black screen and I don't know what to do.
  Pressing any key F doesn't show any results and I have no recovery CD.

  Does anyone have an idea what to do?

  Thxxx in advance

  Hello

  I don't know why it happened, but if the short workaround solution posted by boarder will not help, so I see good opportunities to contact the ASP in your country for assistance.

  > During the last update, it was an update of the firmware, the system crashed, and it no longer starts.
  You're talking about the firmware update
  Maybe it was a BIOS update which failed and so the laptop will not start again
  As already said in this case that only the ASP technician could help you.

• Having the black screen after put the password in

  Hello, my HP model number 15do11TU, product code F6D42PA #ABG has a black with the cursor screen after that I entered the password. I can open the Task Manager but when I click on switch to try and get anything that is open, nothing happens. I tried to remove the battery and powering off/on power but still nothing, help!

  Hello

  Try the following.

  Stop of the laptop and leave it like that for 10 seconds.

  Tap here to f11 as soon as you press the power button until you see a message "Windows is loading.

  On the next screen, select your Keyboard Layout and on the next screen, select Troubleshooting.

  Select 'Advanced Options', and then select System Restore.

  Click on yourcurrent system O and then wait as the system restore window opens.

  Choose a restore point before the problem session opening took place and then proceed to the system restore.

  Kind regards

  DP - K

• Black screen after using Windows Memory Diagnostic

  Recently I have experienced problems with the system restore doesn't work don't not and although perhaps it was the file system and so I started Windows Memory Diagnostic and didn't know that you need to manually restart the computer and so I tried works again and again until what it finally hit me that I needed to restart it myself. He began to do his thing and I left a little to return to a black screen at 3:30 and it is now 23:00 and still nothing has changed. Don't know what to do and I don't want anything corrupt or damage my computer anyway. Is it normal for her and if not, how can I stop my computer safely?

  Hi Brendan,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  This problem may occur because of corrupted display driver.

  I suggest you use the steps in this article and check if it helps.

  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Black screen after opening the lid - Pavilion g6

  Hello, I need help. I bought my laptop a few days ago and installed Windows 8.1.  When I closed my lid and opened after a while the screen remained black, so I had to force close button and restart. I tried to change the power plan settings to "Choose the closure of the hood", and it always ends the same way "Black screen", does nothing. This is a brand new laptop and it is that wories me. It must be a software problem, I hope that you guys could understand.

  Thank you Marko

  Finally, I found a solution.

  I did Update my Windows and everything works fine from that point.

• Black screen after leaving the computer idle for some time.

  Original title: Black screen

  Laptop screen starts to turn black every few seconds so I don't use it to take a short break.  The only way to get back the screen is to move a finger on the mouse pad, otherwise, it is just black.  The only way to stop what is happening is to switch off the laptop, wait a few moments and then turn on laptop.  But if I take another short break, this cycle repeats.  Any ideas please.

  Hello

  To provide the proper resolution, I would need more information on your side.

  (1) did you last changes made on the computer prior to this problem?
  (2) did you put the screensaver in a vacuum?
  (3) do you have any particular power on your computer(sleep/hibernate) model?
  This problem can occur if the screen saver is put under vacuum.
   
   

  I suggest you to set the screen saver because none and check if it helps. To configure the screensaver to zero, follow the steps described in the article.

  Change your screen saver
  http://Windows.Microsoft.com/en-us/Windows7/change-screen-saver

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite A300-15 has - black screen preview using the builtin camera

  I just bought a new computer laptop Toshiba Satellite, but built in camera is not working well.
  Whenever I open the camera assistant software, it shows me a black preview, but when I take a snapshot he takes the picture...

  I tried with msn and Skype, but it shows the black screen.
  I searched Toshiba forums and all the troubleshooting guides and impossible to find a solution to my problem.

  Help, please?

  Try to reinstall the webcam software.
  This should help you.

  Latest software for webcam can be downloaded from the page of European driver of Toshiba.

  Then remove the preinstalled software, restart the laptop and install the downloaded software.

  Good luck