BlackBerry Q5 display on lock screen wallpaper will not change (with aprental controls off-road and without)

Similar Questions

• BlackBerry Z10 display on lock screen wallpaper

  A week ago, I noticed that my Z10 display the BB_Blue.jpgp wallpaper on the lock screen. I saw him a few days and then he stopped.

  I thought it was odd because I had not chosen a background of screen on the device at this point, so I thought it could be related to the OS update to 10.1.0.273 (although this has happened a few weeks after the update).

  But I liked the look!  He relieved the monotony of the dark background.

  Then I put the wallpaper at BB_Blue.jpgp and it works on all screens except when the device is locked.

  Anyone know how to set the background image to display on the lock screen?

  The solution came to me after I realized what was different about my setup.

  I had activated the Parental control as a means of screening telemarketer calls. With only active PC calls from numbers in my contacts would cause the phone to ring, all other calls would go directly to the answer.

  What I realized, is that certain settings applied while Parental control is activated, applies only to this mode. My idea was the fact that I had arranged my icons go, and when I disabled it briefly Parental control they were back to the standard display.

  I tested this by assigning the wallpaper for the purple standard view, then activated Parental control set the wallpaper in blue. When you navigate in Parental control mode, the wallpaper is blue, but when the screen freezes the purple wallpaper is displayed.

  If the bug (or feature not documented), it's that the wallpaper you choose with active Parental control is not used for the lock screen. The locked screen uses the wallpaper to the standard display. In my original problem, because I didn't put a wallpaper for the standard display, the locked screen showed that the dark background.

• HP Pavilion 15z Touch: screen brightness will not change

  When I use the keyboard commands to adjust the brightness of the screen, it does not work. When I go into the control panel to set the brightness of the screen remains the same. The adjustment bar will move from dim to bright but the brightness of the display will not change. How can I fix it? I've only had this computer for 4 days, so everything is still at the factory.

  Hello @KayLeeM,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I came across your post about the brightness of the display and wanted to help!

  Try searching for the Device Manager in the Start Menu.  Then expand the monitors section and see if you have an option for Generic PnP monitor.  If so, do a right-click on him and generic PnP monitor enable, if not already.  Now, check to see if you can adjust the brightness.  If you're still having problems, then try to see the following resource and let me know how it goes:

  Difficulty of Windows 10 brightness control works not problem, here's how to [Guide]

  (Not a HP website supported).

  Please let me know if this information has been helpful by clicking the thumbs up below.

  Kind regards!

• Screen brightness will not change

  Greetings.  I have the model SVE14A35CXH.  A new problem has arisen today: I can't set my screen brighntess.  It does not solve with manual controls (i.e., using the function key, or by accessing the settings of the bar charms, or by the 'Power Options' Control Panel).  Moreover, I observe without changing the brightness of the screen during the occultation/increase in ambient light, despite the fact that I have activated in the VAIO Control Center of automatic detection of brightness.  I am running Windows 8.1, and all of my updates seem to be current.  I would be grateful for any suggestion.  Thank you!

  Hi cjwinchell,

  How about turning off auto brightness in Vaio Control Center then manually changing the brightness? It work? Please provide us with the information we provide the correct solutions. Thank you!

  ~ Mark

• Wallpaper will not change on IPad Mini

  so this morning (Thursday, 10 March) I could not change the background of a photo of the chrome. I tried to restart but he did nothing. It does change of dynamics.

  I see that your iPad is an iPad to the school. Have you been able to change wallpaper in the past that the default built in wallpapers? If you cannot change the background images by default settings, perhaps, the school has restricted somehow. You save the image in the photos app before trying to use it?

  In any case, try a forced reboot and if it does not, explain in detail what happens when you try to change the background. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Fund and screen savers will not change.

  Original title: Operation Catalyst Control has stopped working. I can't select a settings or screensavers, but only the color of the background!

  All funds and screen savers still show in my control panel;

  However, I'm unable to change on my computer.

  Message says "the catalyst control center has stopped working"

  Have you tried wverything including yo recovering an earlier date.

  This can be corected and, if so, how to do for a person to computer unsophicated?

  Thank you very much!!!

  Hello

  1. which version of the operating system you are using on the computer?
  2 did you do changes on the computer before the show?
  3. What are the steps you tried?

  You can update the graphics driver and check if it helps.
  Windows 7
  See link: http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Windows Vista:
  Check out the link http://windows.microsoft.com/en-US/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  Windows XP:
  See the link: information about the hardware devices for Windows XP drivers
  http://support.Microsoft.com/kb/319908

  Provide us the information to help you best.

• WALLPAPER WILL NOT CHANGE...

  So I'm going to "Choose a wallpaper" and it says"click a pictue to make my wallpaper"

  Good, and then he said: "to use a picture that is not listed, go to the image and double-click it."

  Good, and then under that there is a 'Place' boxwith a menu drop down and a "Browse" button next to it.

  My problem is that when I click on the list of the "Location" box, so that I can access the other photos from other locations (such as 'window wallpapers' for example), it flashes only on change for a second and then it comes back immediately to the original selection of 'Place' even she began with.

  It doesn't seem to be a mouse the related question given that the problem happens if I use my wireless mouse or laptop touchpad... so I can't change my wallpaper.  HELP PLEASE!

  What of the Browse button? What is the only one to be used to navigate to the "elsewhere".

  t-4-2

• G70 screen resolution will not change

  HP G70 - 257CL running Windows Vista Home Premium SP2

  Mobile Intel 4 Series Express Chipset Family

  Have this second hand with a broken screen. Until I could get a new screen, I used the HARD drive in another notebook successfully. Now reinstalled in the G70, have everything works fine except the screen resolution.

  Reports adapter Device Manager works correctly. I uninstalled and reinstalled, updated the drivers. But no matter what resolution to choose for the screen, it remains the same.  I've currently set to 1440 X 900, 32-bit color, refresh rate of 60 Hz. But what I get is closer to 800 X 600. And it stays that way, no matter what I put it to.

  To the best of my knowledge, I uninstalled all drivers associated with the other laptop, so there should not be anything interfere. Thanks for any help, that all the world can offer.

  Hi Barnaby,.

  It doesn't sound like an exorcism is necessary. From all I have seen and know the computers that he shouldn't do that. Before you call the Ghostbusters or a priest try connecting an external monitor to see if you have the same problems.

  http://support.HP.com/us-en/document/c01938980

  Thank you

• Display Port of Optiplex 760 will not work with monitor UZ2315H

  I have Dell Optiplex 760 (a VGA and DP) and UZ2315H (a 2, HDMI, DP, VGA) monitor, I try to connect to my PC monitor with DP, but this isn't a job, it works with VGA but not support maximum resolution 1600 x 1080.

  I try to connect Optiplex 760 DP on the PC to TV-Online work.
  I try to connect my laptop to UZ2315h-online work DP.

  Not sure why the DP of Optiplex 760 does not work with this monitor. Is this a problem of incomparable version?

  Thank you.

  The Optiplex 760 is 7 years old. I don't know what revision is his DP. How old was the laptop that worked?

• L420 screen brightness does not change with the function keys

  I installed the last dryers and since then I am unable to change the brightness of the display using the function keys. I installed several driver updates from where it is difficult to know which driver is causing the problem. The pointers in this area would be a good help.

  The latest driver Intel HD (from Intel) is originally this issue. Uninstall and reinstall the driver provided by Lenovo.

• When I try to change my lock screen wallpaper I get error saying "setting of the lock screen has failed. Please try again ".

  Original title: locking error screen

  Hello. I use Win 8 Pro x 64 and I'm having a problem affecting the lock screen wallpaper. I am the admin of the machine and Windows is activated.

  After a few days ago, Windows stopped to change my lock screen background. When I try to change it, the error is displayed on the screen:

  LOCK SCREEN ERROR

  Setting the lock screen has failed. Please try again.
  However, I can still change my profile picture and the bottom of the start menu.
  Other users of the computer can change the lock screen normally. My user account is linked to my Outlook.com account as well as others.
  I already tried the other 'solutions' out there: in doing a selective startup with msconfig, disable services applications at startup and also manually delete the folder "C:\ProgramData\Microsoft\Windows\SystemData". Needless.
  I also have the feeling of other users on the web: it's somehow connected to some Windows updated published these days.
  I would appreciate any help on this matter.
  --
  André
  E-mail address is removed from the privacy *.

  Hi, Tadasha. Thanks for the reply.

  In regards to KB 2770917 updates, I already installed it on my Win 8 as well as others (I keep the OS always up to date). So it has not really helped but thanks.
  On the tip of the gob0nkers is not really the case here, because I don't want to set a wallpaper of single lock for each user (in fact I had already read his answer to the question of ch). So far I have found no article on the web by offering an effective way to work around the problem.
  What I've done: created another user profile and abandoned the old (who introduced the problem). I think that it is related to the file the user AppData or something.
  So far things are working well with the new profile of the user.
  Thanks for the help!

• Received warning re. McAfee ScriptScan 14.4.1 extension will not work with FF 10.0.2 update and it will be disabled. How should I proceed?

  MY system is Windows XP, SP3, computer laptop, running FF 9.0.1. When you try to update to FF 10.0.2 I received a msg that the McAfee ScriptScan 14.4.1 addon will not work with FF 10.0.2 and will be disabled. Will I go ahead and install the update for FF? Wouldn't be a risk to security anyway? What's the worst?

  Hello

  A thread on the forum McAfee refers to this and those who have responded to this topic with FF10 said that it actually works, see https://community.mcafee.com/message/226187

  Hope this helps,
  Michelle

• Portege M700 will not change the screen orientation

  I installed the driver for the webcam for the M700, and every time I install it, I get the same error message:

  "Open Webcam driver fail - please restart camera or computer."

  I reinstalled the drivers of many times, and it still does not work.

  Therefore, I tried the msconfig method, disabled all the startup process and then reactivated their.

  The webcam shows the same error message, and now the screen will not change orientation when I rotate the screen.

  You try to use Windows XP Home edition or what? Generally, each laptop comes with preinstalled and configured operating system.

• Icons wiggle and move in the home screen but will not go to the next page

  Icons wiggle and move in the home screen but will not go to the next page

  You need to move to the edge and hold the button for a few seconds so he can move to another screen.

• Windows 7 splash screen will not change after the vista update

  After updating vista 32 bit to windows 7 32 bits, the splash screen will not change and he showed the vista boot. I read a lot of forum and the web page, but this solution:

  «.. . the dummies and bad start screen for Windows 7 is due to the locale entry in the startup folder, which could not be set when editing or rebuilding the BCD. When the locale is not found, Windows boot loader doesn't know what local startup folder to look for the animated bootscreen. Thus, in order to fix the boot screen so that the splash screen can be re-established, restored or reset to original animated Windows 7 boot screen, just run one of the following commands at the prompt with administrator rights:

  bcdedit/set {current} settings regional en-US

  or

  BCDboot % WinDir % / l en

  Change the US to the language version of Windows 7 installed, as ja - JP, en - us, es - ARE, pt - BR, zh - CN, zh - TW, fr - FR, fi - FI and etc.

  Restart the computer after running the command to see the new boot UI (user interface) be used again. To check if the locale has been entered properly, just run the bceedit command in the command prompt that is running as an administrator... »

  not solved my problem and also know for many users... after updating vista in windows 7 splash screen stay the same...

  Thanks for your help
  Hispanico hispanico

  Hi hispanico,

  Thank you for visiting Microsoft Answers.

  I suggest you do a repair from WinRE (Windows Recovery Environment) system using a Windows 7 installation disc. Follow these steps:

  1. turn on your computer, insert the Windows installation DVD, and then restart your computer.

  2. Press any key when prompted to do so and follow the instructions that appear.

  3. when the Windows Installer page, click repair your computer to access system recovery options.

  4. follow the instructions.

  Please visit these links for more information on the Startup Repair:

  1. http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  2. http://windows.microsoft.com/en-US/windows7/What-are-the-system-recovery-options-in-Windows-7

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.