BlackBerry smartphone how to add new device on BlackBerry Protect Online

Similar Questions

• Cannot add new device using the USB port

  Cannot add new device through usb ports, the cable is peripheral poering, not listed is not in the menu

  Thread merged:

  try to use the scanner to photo but can not add new device via USB, cable powers the device, but the device not listed is not in the menu

  Hello

  1. do you get an error message when you add a new device?

  2. What do you mean by "the cable is peripheral poering"?

  3 are. what menu you referring?

  4. is it the problem persists with a particular device?

  5. were there any changes (hardware or software) to the computer before the show?

  Reply with answers to help you in a better way.

  Click on the below mentioned link to get an idea on how to ask for suggestions in this forum.

  Suggestions for a question on the help forums

• I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. Delete the d

  I don't know how to add additional devices to my list of "trusted devices" in my Apple account.  When I opened my account on Apple using my apple id, I see only my iphone6 listed as a "trusted device";  There is a button to edit, for example. deleting devices, but I can't, or I do not understand how to add my other devices to my approved devices - but is anyone know how to add my Mac and iPad to this list?

  Download a purchase on a device should associate this device with your Apple ID take a look at this.

  View and delete devices in iTunes - Apple Support

• How to add new fields of contacts and accounts?

  How to add new fields of contacts and accounts?

  You can use 'Fields' and 'View '.

• How to add the device (eth1) after the command 'neat' calls 'Configure Network'?

  People,
  
  Hello. I want to install 2-node RAC Oracle 11 GR 2 VMPlayer 3 System. The host OS is Windows 7. Oracle Linux 5.6 is the guest operating system. 2 nodes (2 Virtual Machines) are RAC1 and RAC2.
  
  We must create the public IP address and IP private for each virtual computer (RAC! and RAC2). IP addresses public (eth0) connect RAC1 and RAC2 of shared storage. The private IPS (eth1) connect RAC1 and RAC2.
  
  In Oracle Linux 5.6, the command "neat" to the root user calls the configuration of the network (5 tabs) as follows:
  
  Devices | Material | IPsec | DNS | Hosts
  
  In the "Devices" tab, I created the public IP address for RAC1 whose nom_peripherique is etho.
  But I don't know how to add another device 'eth1' in the 'Devices' tab to create the private IP address.
  Thus, the network cannot be implemented.
  
  Can any folk tell me how to add another device (eth1) in the 'Devices' tab after the "neat" command calls "Network Configuration"?

  user8860348 wrote:
  Folk,

  Hello. Thanks much for the reply.

  In the directory "/ etc/sysconfig/network-scripts", there is a file 'ifcfg-eth0"which contain a public IP address.

  But there is no file "ifcfg-eth1" that must be a private IP address.
  What is the reason that there is no device 'eth1' in the 'Devices' tab in the Network Configuration window?
  Do we need to create a file 'ifcfg-eth1 '?
  What should be the content of 'ifcfg-eth1 '?

  Did you create a second NETWORK adapter to the virtual machine?

• BlackBerry Smartphones strange BIS connection behavior... how to add new account?

  Hi I created a BB e-mail account via my Storm and it worked like a charm.  But when I went to log on the site of BB on my computer at home (http://bis.na.blackberry.com/html?brand=vzw), it would not accept my password... even if I know it's good.  Ask for the site to send me a password does not work, as I had never actually received the message on my phone.

  So I removed the e-mail account of BB on the thought of my phone that I would like to re - add just to see if that fixed anything... but when I try it tells me the username already exists.  If I ask the site to send my account information to my PIN, I get a message that my username and password do not exist.  And when I go to create a new account via the BIS Web site, tells me that the username already exists.  Is not a common user name, so there is no way someone he recorded in the short time between deleting my account and trying to add new.

  How to re - add the service with my previous username without clicking on the button "create a new e-mail account of BB?

  Help!

  That did not work, unfortunately... so I ended up calling the technical support of Verizon and they managed to re-pair my phone with my BIS account orphan.  Sounded as if it was a fairly simple process, but apparently not something I could have fixed on my own.

  Anyone having this problem: just call Verizon!

• BlackBerry smartphones how you add BB msger 5.0

  OK, I saw in BB App store Mgr 5.0 came out.

  How do add you it to your bb?  B/c last night I went to tried to add it on the app store, it downloaded, rebooted, and nothing has changed.

  Still stuck on v4.5.0.138

  I have WE 8830

  Verizon carrier

  Thoughts?

  To do this, on your browser of the BlackBerry device, go to http://www.blackberry.com/blackberrymessenger

  and download/install.

• How to add new type of device ID?

  How to add the new type identifier to a device?

  Adding to your scheme would be as follows:

  
  
  
  
  

  You must also add the value specified in the in DVC_ID_TYPE_FLG research.
  You must add DMNEW in there.

• BlackBerry Blackberry Curve Smartphones - how to add a second alarm

  Can someone tell me how to add multiple alarms in a Blackberry curve?

  You can use the calendar for more alarms.

  The integrated application called "Alarms" only supports an alarm.

  But there is that a 3rd party called BBSmart alarms Pro Application that takes in charge several alarms.

• BlackBerry smartphone how to add BlackBerry Messenger Contacts?

  I recently bought the phone BlackBerry 8300 World Edition and found the tutorial online to be quite useful.  Unfortunately, I found myself stalled because I want to add contacts so that I can start conversations on the BlackBerry Messenger network.  Can anyone tell how to add contacts and send a message to them?

  Kind regards

  BABB

  Click the icon of your BB Messenger.

  Highlight Contacts > press menu (button to the left of the trackball)

  Click "add to Contacts".

  This will take you to the address book... Scroll to the top, click "Use once"

  Press menu again and select... "Request email" type their e-mail address.  This will send the request to the selected recipient.

  Or

  Choose 'Ask pine', if you already know its pin code #.

  In both cases, the request must be accepted by the recipient before you can have added them as a contact.

   

  They will appear as "pending" until they agreed.

   

  Hope this helps,

   

  John

• BlackBerry Smartphones unable to add new contacts or edit existing ones

  For these last days, I was suddenly unable to modify existing contacts or add new contacts on my 8520. I tried to back up data and decommissioning and the upgrade of the operating system and updated to the current operating system, but I still have the same problem.  I just 340 contacts...

  Please help for technical assistance...

  Please remove the Yahoo! Messenger or Windows Live Messenger because he has problems with phones OS5 resulting in the inability to modify and add contacts.

• How to add new folders in thunderbird for mac 38.2.0 POP3

  Switch PC to a macbook pro. Downloaded Thunderbird 38.2.0. I am trying to add new folders, under local folders. Trash and Outbox are in local folders, but I don't see how to add folders to organize my mail.

  Right-click

• How to add new data and delete old data from a custom text file?

  Hi guys!

  Well, I'm in a bit of trouble.

  I need to make a request to some GPS tools. Split data in indicators, generate coordinates (google maps format), and so it goes.

  One of the functions of the systems is the calculation of oscillation of coordinates. The formula should be: latitude 1 - latitude 2 = latitude AND longitude 1 - 2 = swing longitude longitude oscillation.

  Since I'm on two values, I thought: "Oh, if I connect these data in a file, I just pick up and do all the calculations part." Yes, this idea is adapted to my needs (even if it is not the best, the computer part solved my problem).

  BUT I don't see a way to write the current value of the loop and erase the old results.

  For example, suppose that loop 1 gave me 1.00000, 2,00000 coordinates and loop 2 gave me the coordinates 3.00000 and 4.00000. Right?

  My log file is similar to: 1.00000,2.00000; 3.00000,4.00000;

  Well, it works. However, we will look forward to loop 3: coordinates 5.00000,6.00000.

  If the program connects to it, I would get the chain: 1.00000,2.00000; 5.00000,6.00000; When I really need 3.00000,4.00000; 5.00000,6.00000;.

  For this reason, when I apply the calculation of oscillation, it will always take the most recent value and do all the calculations with the first result (from loop 1).

  Well, I wonder that there is a way to add new data to a file and replace the old values, with simple code. If anyone knows how, please respond here!

  Considerations:

  (1) I want to do it as simple as possible. My code is kind of great, and it is not appropriate to insert structures or library now.

  (2) maybe the explanation is not as simple as it is for me. Really, I couldn't find a better way to say what I need.

  (3) if someone has doubts as to my doubts, please just comment and I'll try to be as specific as possible.

  Thanks in advance!

  I guess my question is why write a file just to delete.

  If you pass an array of points from one iteration to another, you will have to take extra time to open the file, read the file, delete the old data, writing the new data, save the file, and then close the file.  It would be pretty much the same thing, but without having to go through the hard drive.

  Just a thought.

• How to add new SourceFire to the centre of defence

  Hello world

  Recently, we got new Sourcefire and need to know how to add it to the centre of defence.

  I'm new to environment fire source.

  Concerning

  Mahesh

  Mahesh,

  Maybe it's not a matter of license, but my team and I will address your issue.  I'll meet you at the end of day today.

  Thank you
  Merv Reyes

• In windows 8 How to add new contacts e-mail

  I want to add new names to my contacts list, but I can't find a way.

  Glance down of all things listed and no contact.

  Click on the sign more and it takes you to a list.

  All existing names, that you can use.

  How can you add more... hotmail, yahoo and gmail.

  Hate to date, but it's mind-boggling.

  Hi kathysenza,
  Thanks for posting your query in Microsoft Community.

  From your description, it seems that you want to add contacts to the e-mail account.

  You cannot add contacts directly from email App Contacts must be added people app.

  To solve the problem with the addition of new e-mail contacts, you can follow these steps:
  You can check this link:

  (a) people: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/people-FAQ

  (b) mail app for Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-8/mail-app-FAQ

  (c) set up your PC
  http://Windows.Microsoft.com/en-us/Windows-8/move-contacts-mail#1TC=T1

  For any Windows help in the future, feel free to contact us and we will be happy to help you.