BlackBerry smartphones "Blackberry App World is had problems to connect to the server Blackberry App World. "Check your network connections, and then try again.

Similar Questions

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Problem ejecting USB Mass Storage Device "this device is currently in use. Close any programs or windows that might be using the device, and then try again. »

  Original title: problem ejecting USB Mass Storage Device

  When I try to eject safely my external hard drive safely I get an error with this title message telling me that "this device is currently in use. Close any programs or windows that might be using the device, and then try again. "I did it. I also tried to close all programs running on the computer and it does not help. I also tried to restart the computer, and it also does nothing. If anyone has any ideas that might be useful please let me know.

  Hi a. Cook,

  (1) how long have you been faced with this problem?

  (2) is limited to any specific USB device?

  This problem may occur if there are handles open with all the files in the USB (Universal Serial Bus) mass storage device are in use by another program.

  Method 1:

  (a) Download Process Explorer from the link below

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  (b) click on search, find handle or DLL (Dynamic Link Library) in the tool menu.

  (c) type the drive letter of the USB device in the handle or DLL substring text box and press the search button.

  (d) find the process and its PID (process identifier) in the following box.

  (e) with a view to the processes of the system tree, look for the process according to the dialog box find handle or DLL.

  (f) press Ctrl + H to display the handles in the view in the lower pane.

  (g) find the file according to the drive letter and right click, choose Manage close.

  Reference:

  
  Problem ejecting USB mass storage device
  http://support.Microsoft.com/kb/555665

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2: You can see the steps in the link below by Diana d.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problem-ejecting-USB-mass-storage-deviceits-in-use/fd56805c-ED8E-491F-8a2b-39ed1c988a71

  Method 3: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

• Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  Hello I am trying to download my site www.novopro.co.uk screw "Publish to FTP" I have updated a page and downloaded from the website and now I get this warning on everypage. Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author. If I click ok the site will load, but I get this error on everypage. I removed all widgets party 3 E, g, engines search, galleries etc.

  I looked through the forum, but not seen no real solution to the issue, I looked at the 'Muse.assets' in the JSConsole and the only script to update is touchswipe.js I do not understand why its doing so, my host said there is no problems with the servers smd ive only uploaded the site (all files) several times.

  My client is now a little inpatient as im yet to find a solution and I'd like to solve this problem as soon as possible. Please can someone help me shed light on the issue and im using the latest version of adobe Muse. Adobe Muse CC 2015.2.1

  Thanks in advance.

  In addition to what was suggested above, you can see if there are other solutions in this doc "some files on the server may be missing or incorrect" Warning Message that can help you and let us know?

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• I get this error message 'some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.  But all the content loads correctly, and it just seems to be an annoying error message.  Does anyone know how I can get rid of this or that which is the cause.  Site is: http://davidkimlaw.com

  You solve the symptom and not the problem. If something is to change the files after they are exported from Muse, the consequences could be vast and varied download to download.

  Don't the accordion on the 'AREAS' jobs page widget if this file exported (and unaltered) opens in the browser on your local computer? It doesn't seem to work on the online site, which could be linked to the questions of the error was about or may be an offshoot of some hand changes were made after export.

  If you empty the re-export of Muse in a folder and then download the same files, I'll take a second look at what's going on. If you wish, you can you could do that in a subfolder so as not to disturb the live site. (When I detected that the index.css file is out of sync I was on my phone and could not go any further.)

  There is also more information about the possible causes of this error here "some files on the server may be missing or incorrect" Warning Message>.

• I always get this message: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  It seems to happen whenever a update of Muse coming...

  I'll transfer my site and when I visit it I get this message even that was supposed to be resolved there are a few versions:

  "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact author Web site. »

  I use the latest version of Muse: 2014.3 release

  I looked at my list of assets within the Muse - nothing is marked not linked.

  I tried to upload my site many times... within the Muse and with FileZilla.

  Fortunately, I have saved the latest version of my site - which was created in the version prior to 2014.3 - and downloaded again.  It works and can be seen here: www.snapscene.ca.

  But as soon as I make all the changes file of Muse, save it under a different name (to be compatible with 2014.3) and upload it - I get the message when visiting the site.

  What gives?

  -Adrian

  It seemed to me the solution.

  When I export the files, I simply left Muse overwrite the files in the destination folder. The files may not overeritten correctly.

  Manually, I went into this folder destination and destroyed all the old files exported.

  I then re-exported the files and then uploaded. All workes from there.

• Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Hello

  Our environment is Essbase 11.1.2.2 and work on Essbase EAS and components of Shared Services. One of our user tried to execute the Script of Cal of a single application and in the face of this error.

  Dynamics Processor Calc does not reach more than [100] ESM blocks during the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  
  

  I did a few Google and found that we need to add something in the Essbase.cfg file as below.

  Dynamics Processor Calc 1012704 fails to more blocks ESM number for the calculation, please increase the CalcLockBlock setting, and then try again (a small data cache setting can also cause this problem, check the size of data cache setting).

  Possible problems

  Analytical services cannot lock enough blocks to perform the calculation.

  Possible solutions

  Increase the number of blocks of analytical Services can allocate to a calculation:

  1. Set the maximum number of blocks of analytical Services can allocate at least 500.
     1. If you are not a $ARBORPATH/bin/essbase.cfg on the file server computer, create one using a text editor.
     2. In the essbase.cfg folder on the server computer, set CALCLOCKBLOCKHIGH to 500.
     3. Stopping and restarting Analysis server.
  2. Add the command SET LOCKBLOCK STUDENT at the beginning of the calculation script.
  3. Set the cache of data large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH parameter.
     • Determine the size of the block.
     • The size of wrestled data.

  In fact in our queue (essbase.cfg) Config Server we have given below added.

  CalcLockBlockHigh 2000

  CalcLockBlockDefault 200

  CalcLockBlocklow 50

  
  

  So my question is if edit us the file Essbase.cfg and add the above settings restart services will work?  and if yes, why should change us the configuration file of server if the problem concerns a Cal Script application. Please guide me how to do this.

  
  

  Kind regards

  Naveen
  

  Yes it must *.

  Make sure that you have "migrated settings cache of database as well. If the cache is too small, you will have similar problems.

• Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists please contact the author of the Web site

  Help! I've just updated my Web site for the first time since the upgrade to the new version of Muse. All files are transferred successfully using Filezilla on my server but I get this error message on all browsers: some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  Web site: 2020artgallery.com

  Hello

  Check this thread some files on the server may be missing or incorrect

• "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center. »

  I have an Aver Media Combo G2 Media Center TV tuner card. Running Windows 7 Ultimate 64 bit. Everything worked fine and then for some reason any Windows Media was unable to download the TV program guide.  I thought I would try reinstalling the TV signal. Setup stopped when you try to download the latest updates. Some research has indicated that I had to manually run "mcupdate", I did. It passed me this hang up, but then I complete Setup with the above message.

  Now, I have no live TV function.

  best bet is the forums on http://thegreenbutton.com at the moment
   
  The game, May 13, 2010 12:49:45 + 0000, jalore wrote:
   
  >
  >
  > Well, I ran the hwclear rebooted and reinstalled Windows 7 correct site hauppauge drivers. even removed the player and reinstalled it and the windows media center drivers and restarted after each of them.
  >
  >
  >
  > no matrix is still getting same error message.
   

  Barb Bowman www.digitalmediaphile.com

• Smartphones, blackBerry, your computer must be connected to the Internet in order to configure synchronization to the start settings. Please ensure that you are able to connect to the Internet, and then try again.

  I get the above message when I try to configure my sync settings... and yet I clearly have an internet connection. I downloaded the most recent desktop software and that did not correct the problem.

  What Miss me?

  Hello 1066stump,

  Welcome to the community of BlackBerry Support Forums

  The following article can help about the problem you are experiencing:

  http://www.BlackBerry.com/BTSC/KB16471

  See you soon,.

• "Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists contact author of Web site.

  Hello

  I just uploaded, via Fetch, a Web site, I'm updating regularly, but when I try to open in my browser, I get the error message above and a mutilated version of the site.

  The insight into Muse looks fine opening and of the 'index' file directly from the folder works OK also. I also tried to export to a new folder and which does not work either! Help!

  See "some files on the server may be missing or incorrect" Warning Message. If you add? muse_debug = true at the end of the URL for a page generate this error will include a list of the files that are obsolete or missing on the server.

• Error: Some files on the server may be missing or incorrect. Clear the cache of the browser, and then try again. If the problem persists, please contact Web site author.

  How can I fix this error message once I downloaded on FTP?

  Hello

  Check this discussion

  Some files on the server may be missing or incorrect

• BlackBerry Smartphones A fatal error occurred while updating your device software. Please try again.

  When the installation process is complete... reboot comes nxt and my BB device works now, after a few minutes, it was that appear "a fatal error has occurred while updating your device software. Please try again" and I unplugged my camera... my question is... is this error affect the stability or my DEVICE work?

  I need your answer

  Hi pasakaw

  Have you intrepted the update process anyway... maybe something went wrong shot, while this software update. Currently, what is the status of your BlackBerry is working correctly?

  If you feel any problem, then you should try a refill of OS using desktop software that will fix it any software glitches.

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.