BlackBerry Smartphones Blackberry Media sync hangs after update in Windows Vista

Hi, I installed Desktop Manager v4.6. in Windows Vista Business edition. When I try to use the Media Manager, he told me that the Blackberry Media Sync is not installed and he asks me if I want to install it. After it downloads and tries to install the synchronization of media, it crashes, it says 'Blackberry Desktop manager has stopped working' and you can only close the program or check online for solutions (which they don't give you any). Any ideas why this happens?

Personally, I don't use the Media Manager. Do not like.

You can enable storage of mass on your Media card and drag and drop files to and from the card support fairly easily.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

    About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

    But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

    1.) several reboots my computer (windows vista)

    2.) update/reinstall Blackberry Media Sync, then by restarting my computer

    3.) reconnection from blackberry to the computer, then open Media Sync

    4.) Open Media Sync first and then connect the blackberry to the computer.

    5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

    6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

    None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

    Is there something that I miss or have not yet done? What should I do?

    Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

    Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

  • Office of Smartphones from blackBerry Media Sync

    I'm trying to get Media Sync works on my BB Desktop Manager.  I think v4.7 a sync media included, but when I try to launch it I get the message: -.

    "The Blackberry Media Sync failed to initialize. "Please run the Blackberry Desktop manager with administrative privileges, and then try again.

    What is going on?  Am I missing something?

    You can do this, but Windows, no DM. Read the public knowledge base article:

    http://www.BlackBerry.com/BTSC/KB15746
    "The installation of BlackBerry Media Sync failed to initialize.
    If please run BlackBerry Desktop Manager with administrator privileges and try again. »

  • BlackBerry Smartphones Blackberry Media Sync doesn't work is not on my Blackberry Curve 8300

    Help, please.  I downloaded the Blackberry Media Sync on my computer.  I can see my Itunes library, playlists, etc., but I can't select it. It gives me an error that it cannot find my blackberry when I try to connect, it says that it is connected to my phone, but not on the media sync?  I reinstalled a couple of times and it still does not detect my blackberry.  I have a Microsoft Windows XP.  I tried to read the comments and solutions, but I have not found one that fits what I'm having a problem with.

    How to install the driver USB for my Windows XP?

  • BlackBerry Smartphones Blackberry Media Sync & Vista Ultimate

    I try to use Blackberry Media Sync with Vista Ultimate and iTunes 8.0.1.11. Media Sync selection generates the prompt, 'the Blackberry Media Sync application is not currently installed. You want to download and install this application? ». The installation starts and then crashes.

    Unfortunately, RIM has decided to use an Adaptec, Roxio software product. I found Adaptec to Roxio and serious quality problems to be less than stellar. This is supposed to work or as most of the software, the products are we beta testers so developers can find a way to code this without crashing?

    It is a separate download from your Desktop Manager.

    http://NA.BlackBerry.com/eng/devices/features/media/mediasync.jsp

    * PS
    I am running Windows Vista Ultimate and it works great.

  • BlackBerry Smartphones BlackBerry® Media Sync has encountered a problem and needs to close

    I have tried to sync my BB Curve Media Sync and always get the same error message, "BlackBerry® Media Sync has encountered a problem and needs to close.  We are sorry for the inconvenience. »

    I tried to restart the computer, insalling and resettlement, MediaSync, Desktop Manager and iTunes. All these actions appear to be ineffectivei n sync music to my curve via Media Sync and I received the same error message. I am able to manually move the music from iTunes on my memory card in the E: drive. Get help troubleshooting Media Sync would be greatly appreciated. Thank you

    System Specs:

    BlackBerry Media Sync 2.0.0.27

    BlackBerry Desktop Software 5.0

    BlackBerry Curve 8310 (v4.5.0.110)

    -8 GB Kingston MicroSDHC

    iTunes 8.2.1.6

    Windows XP SP2

    He finished that my problem was with iTunes. I had several songs that were counties of negative play and negative evaluations. Remove these negative amounts of my files in authorized iTunes Blackberry Media Sync work perfectly.

  • ASUS laptop computer: touch screen does not work after update of windows 10

    My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

    Hello

    Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

    Kind regards.

  • HP Pavilion TouchSmart 14-n013: touch not working after updates on Windows

    Hello

    My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.

    I hope you can help.

    Thank you

    According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

    You can also check your warranty here to check the status of the guarantee

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    Although I am an employee of HP, I speak for myself and not for HP

  • When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

    When you do the automatic updates of Windows Vista, I get the code below.

    'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

    • What should I do to fix this?
    • And what does this update actually?

    Thanks for any help provided.

    scrubie,
    If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

    Hope that helps. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Color LaserJet MFP M176 Pro: No printing on HP Color LaserJet MFP M176 Pro after update of Windows 10 anniversary update

    My HP Color LaserJet Pro MFP M176 does not print after update of Windows 10 anniversary update. I've updated two computers (HP Compaq Elite SFF 8300 and E6320 Dell), Hp with 2013 installed Office and Dell with Office 2010 installed. The printer is connected to my network. The latest "complete solution drivers' HP was installed before the upgrade. Printer does not printer-> Printtest properties, error notification appears and asks me if I want to troubleshoot the error. I can see the printjob in the spooler, but it is immediately deleted. Does not print any programs I've tried, with the exception of the notebook HP Print and Scan Doctor! When I troubleshoot with Windows printtroubleshooter, no problems found. Same thing with HP print and scan the doctor.

    I uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

    On the Dell computer, I made a new clean install of Windows 10 Anniversery update, from a USB key. Office 2010 installed and 'full pilot solution again'. Same problem!

    On August 18, 2016, I found new drivers on Hp. new downloaded web pages "complete solution drivers still" uninstalled all the drivers and the Hp programs, rebooted and installed "drivers complete solution." Same problem!

    Among the many solutions, I tried turning the firewall. No help.

    I know that brother Corp has sent an email to their customers, there are big problems with their printers/drivers and the anniversary 10 Windows Update. Same problem with Hp printers/drivers?

    Someone who has a solution?

    Hello!

    Thanks for your suggestion of a solution!

    First of all, it fixed my problem of printing when I tried with a new user on both computers. Yet, I was a little confused that two updates and an installstion clean "updated anniversary" should lead to a curropted user profile!

    Then when I did what I always be with new computers/users, to the environment variables 'TMP' and 'TEMP' C:\Temp for the new user. Printing stops again. Extract a little more and found that users on C:\Temp needed to be 'total control '. 'Change' was not enough. Perhaps one of the new things in birthday update?

    In any case, there where the pleasure with your help!

  • Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

    I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

    What should I do?

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

  • After an update of Window Vista Business, I lost the option of hibernation

    After an update of Window Vista Business, I lost the option of hibernation

    How can I solve this problem?
    Thank you

    Hey Joe,

    What is the number of the Windows Update installed recently?

    I suggest you to follow the steps from the link and check if it helps.

    How can I enable hibernation on my Windows Vista computer?

    I hope this helps.

  • Why I repeatedly get a security update for Windows Vista for systems (KB2676562) and update for Windows Vista (KB2679255) focused on the x 64 even after that both have been installed successfully?

    update of security (KB2676562) has already been correctly installed 21 times, began towards the end of May.  Update for Windows Vista (KB2679255) was successfully installed 35 times, he began in mid-April.  These two continue to update themselves every day and do it at least twice a day, back to back.  It is very frustrating to have to deal with that and makes me think that something may be a problem with my computer.  I had heard of registry cleaners is not not a good thing to use, if recently I not unhooked my registry free cleaner.  I hope that it has not caused my computer to lose any registry key values.  Does anyone know a possible solution or what I need to do? I thank everybody help, please!

    Hollow salvation of the farm,

    Try these steps
    Method 4: Reset the contents of the Catroot2 folder
    go to start > all programs > Accessories > right click on command prompt > run as administrator
    Reset the contents of the Catroot2 folder. To do this, follow these steps:
    Type the following commands and press ENTER after each command:
    net stop cryptsvc
    MD %systemroot%\system32\catroot2.old
    xcopy %systemroot%\system32\catroot2.old /s %systemroot%\system32\catroot2

    output
    Restart the PC and then
    Method 8: Rename the folder C:\Windows\SoftwareDistribution
    Rename the Windows Update temporary C:\Windows\SoftwareDistribution folder. To do this, follow these steps:
    Open an administrative command prompt window.
    Run the following commands and press ENTER after each command:
    Net stop wuauserv
    CD %SystemRoot%\System32
    Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
    Net start wuauserv
    Try to install updates again.

    also try to scan your computer
    Method 1: Use the Microsoft Safety Scanner to scan your computer for viruses and malware

    To analyze your computer by using the Microsoft Safety Scanner, click on the following link:

    http://www.Microsoft.com/security/scanner/ use the software to combat spyware and antivirus software to scan the computer.

    To see a list of third-party anti-virus software vendors, visit vhttp://www.microsoft.com/windows/antivirus-partners/windows-7.aspx.

    To download and install Microsoft Security Essentials antivirus software, visit http://www.microsoft.com/en-us/security_essentials/default.aspxc.

    Please come back if you need assistance
    Thank you
    Makoi
  • December 15, 2011 updates to Windows Vista. After that automatic download and install on stop, my computer would not start up

    Original title: 15 December 2011 update of Windows Vista

    After that automatic download and install on stop, my computer wouldn't boot. I had to run Startup Repair 2 days in a row and remove the updates. They are always there to be installed when I stopped. Help, please!

    Hello

    I suggest you to see these steps:

    Step 1:

    I suggest to reset Windows Update components and follow step 2.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Step 2:

    After reset, you will find that Windows 8 or 9 update that must be installed.

    Try to update one by one and check.

  • After you download updates in Windows Vista using my friend constantly "impossible Configuration.", returning changes

    A friend becomes "Configuration failed, changes of recovery" after the download of the Windows updates.

    His PC is running Vista, and the problems started after a period of 3 months when the computer was not in use.

    Download updates (15 of them) successfully, but no 'Configure', and then she gets "Configuration Failed, recovery changes, do not turn off your computer.

    Any help would be appreciated

    Hello

    Try the procedure described in the following article:

    Step 1: Reset Windows Update components.

    http://support.Microsoft.com/kb/971058

    Step 2: The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7: http://support.microsoft.com/kb/949358

Maybe you are looking for

  • Should FCP Archive download all clips on a SD card

    FCP has a 'select download' that works well for selecting archived clips in the project. But when creating archives, it looks on the map - archive, even when I chose specific clips. That means old clips to the left on the map mingle with new clips tu

  • Satellite A300 - 2C4 is dead

    Right then, I got this because he's dead. Operating system to disappear from the hdd and never worked again. I looked into it myself. I'm trying to install windows xp, windows 7 and the twoVersions of Linux to try and make it work. A Linux worked onc

  • Satellite U400 - 12 p - multimedia keys stopped working

    Hello. multimedia keys on my Satellite U400 - 12 p has recently stopped working. Turn everything first they get is "stuck" on, a few days ago the resulting work back and later arrested again but this time they "stuck" is off. with the backlight on th

  • function with a variable number of cubic curves

    Hello I have a set of data : a set representing the independent variable and a set representing the dependent variable. I need to find the minimum number of cubic curves (find their coefficients) that reduce the average quadratic error less than a gi

  • Webcam Sony

    Hello My Sony bulit in webcam sometimes works and sometimes doesn't, and when it does work it repeat 'webcam not found. The webcam is used by another application or is not connected. Please click on login button and try again" I do it but still nothi