BlackBerry Smartphones Compatability between blackberry and Microsoft Mail

I bought a computer with windows Vista 64 bit. The seller has convinced me that I don't have outlook, as it had Microsoft mail. I tried to sync contacts and calendar, but have problems. Contacts seem to be picking up information from the fields, so I lose a lot on the blackberry or the spread between home info and info office. I have not been able to tt sync until the calendar to the alll. I am using Desktop manager V5.0, the version of the platform is 3.4and application versiin is 4.5.0.131. Is this an inherent compatibility or it should work?

The phone is the Blackberry Curve 8330.

Hi and welcome to the Forums!

This is the KB that deals with PIM DTM software compatibility:

KB12268 Applications supported by BlackBerry Desktop Manager to synchronize

I can't see Microsoft Mail there anywhere.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones difference between SMS and MMS

    Maybe a stupid question, but what is the difference between them? I like just text, so I use the SMS. What is MMS? I must say that I am in love with my BB Bold 9650! I had a lot of cell phones, but this is my favorite!

    The only difference between SMS and MMS, it is that MMS messages have an attached data (picture, movie, another file) file.

    SMS = Service of short Message

    = Multimedia Messaging Service MMS

  • VMware 5.1 with compatibility virtual RDM and Microsoft SQL Cluster mode

    Hello

    I am a bit confused by the VMWare documentation and hope someone can point me in the right direction.

    I want to know if it is possible and supported to create a cluster of SQL 2008 R2 2 nodes (Server 2008 R2 SP2 are VM) on a 2 node cluster VMWare 5.1 with the use of Virtual RDM compatibility?

    When you read the PDF on vsphere5.1 on the link below on page 9, there's a indicating note 'NOTE Clusters on multiple physical computers with no-pass-through RDM is supported only for Windows Server 2003 clusters. It is not supported for clustering with Windows Server 2008. »

    http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Setup-MSCS.PDF

    So that means that I want "a 2-node cluster sql 2008 R2 server" is not supported?

    But I also found this link below and in the table of the column on the Cluster SQL line RDM is said 'yes' with a 2.

    VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

    Means 2/redirects-> for more information on shared disk configurations, refer to the Disk Configurations section in this article.

    -> Disk configurations

    • RDM: Configuration using a shared Quorum for storage or data must be on Fiber Channel (FC) based on RDM (physical cluster across boxes "CAB" mode, virtual mode for cluster in a box "IPC") in vSphere 5.1 and previous versions. RDM on storage other than CF (iSCSI and FCoE) are supported only in vSphere 5.5. However, in earlier versions, FCoE is supported in very specific configurations. For more information, see Microsoft clustering solutions table above note 4 .

    What follow-up note4->

    1. In vSphere 5.5, native FCoE is supported. In vSphere 5.1 update 1 and 5.0 Update 3, two cluster configuration of the node with Cisco NAC (VIC-1240/1280) cards and driver version 1.5.0.8 is compatible with Windows 2008 R2 SP1 64-bit guest operating system. For more information, see the VMware hardware compatibility guide:

    This means that it is suuported, I "m confused.

    Hi Bypy,

    Two windows 2008 R2 SQL virtual cluster nodes with RDM is supported only for the IPC or Cluster In a Box that is to say if the two virtual machines reside on the same host ESXi. The same configuration is not supported for the cabin or Cluster across boxes (virtual machines running on different hosts ESXi).

    The CAB, you go for the physical RDM mode.

    According to this link, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959

    SQL Cluster using windows 2008 R2 is supported for both physical and virtual mode RDM. Between physical and virtual mode depends on whether you want the CAB or IPC respectively.

    I hope this helps.

    See you soon,.

    Arun

  • Satellite C660 - compatibility between motherboard and hard drive internal

    Hi, I have a problem with the compatibility between the internal (1 terabyte) hard drive and installing windows 7 pro.
    I broke my old internal hard drive (320 GB) and I bought the new hd (1 tb), but during the installation it says that w7 cannot be installed on this new hard drive.

    Can my pc motherboard (serial number: 3B071014k) support the new hard drive (serial number: wd10jpvx)?
    and if the answer is 'yes', how can I make it work?

    First of all the question has nothing to do with the motherboard and HARD drive compatibility.
    If the HARD drive is visible in the BIOS (first page), the HARD drive is supported by the BIOS and HARD disk controller.
    In the case where the drive HARD isn't recognized, you will need to replace this HARD drive with another. I guess the smaller size of the 2.5 SATA HDD THAT would be taken in charge (500 GB)

    However, in case the HARD disk is visible in the BIOS, you should be able to install Windows 7.
    Before starting the installation, you must format the HARD drive and should create the system partition.
    For this procedure, I recommend to use some tools such as partitions for example: GParted
    GParted is a freeware Linux tool.
    You can create a bootable USB key in order to start the device using GParted:
    http://gparted.sourceforge.NET/LiveCD.php

    Then, you should be able to format the HARD disk and create partitions.

  • Upgrade to Windows 7 and Microsoft Mail

    I've recently upgraded from Vista to Windows 7.  In the process I was told my Microsoft Mail is no longer function but I would be able to access my files.  The download has created a shortcut on my desktop but when I try to open it nothing happens.  How can I recover my files?

    Also, I guess I now have to download other software either Microsoft Exchange or Outlook to receive emails.  Is one of these freely available somewhere?  Can you give me direction?  Thank you.

    Go to the Microsoft website and download "Windows Live Mail".  You will find it is very similar to the Vista mail client... and for me it automatically put all my emails sent, deleted and saved in Vista in the new system.  Try this link...

    http://download.live.com/wlmail

  • Problem with VPN compatibility between 2811 and 2911

    Hello

    I would ask anyone had problems with the implementation of a VPN tunnel between 2811 and 2911?

    The IPSec VPN is established, but for some reason, I cannot ping the side LAN across LAN to the other end of the VPN router?

    All experience would be highly appreciated

    Thank you

    IPSec VPN can be smoothly between routers cisco (and not nesesserely cisco) set up, so there should be no problem in your case.

    If you say that this tunnel is established successfully, then the problem most likely related to routing problems between sites or incorrect configured crypto-acl. Check if the hosts located on both sites have correct routing information on how to get to subnets on the other site.

    Make more accurate assumptions, it would be helpful that you provide config on both sites and describe your topology.

  • BlackBerry Smartphones difference between EDGE and 3G with a BB symbol next to him? When do they appear?

    Hello

    I am new user of BB 9360. I activated a BIS plan. Now when I turn on 3G optional Mobile 3 G network on top with a BB symbol next to him get but when I turn on 2 G instead of 3 G Mobile network I get written EDGE the high right referring to the page.

    So, that means?

    Again, I am able to properly set up my e-mail account and getting the push-mail service but the App World, Facebook App BBM works not despite a BIS plan that supports the foregoing.

    Please give a solution.

    Hello and welcome to the community!

    sanjoyshaw wrote:

    I am new user of BB 9360. I activated a BIS plan. Now when I turn on 3G optional Mobile 3 G network on top with a BB symbol next to him get but when I turn on 2 G instead of 3 G Mobile network I get written EDGE the high right referring to the page.

    So, that means?

    KB02334 Indicators of State of network of networks GSM/GPRS/EDGE / 3G / 4G

    sanjoyshaw wrote:

    Again, I am able to properly set up my e-mail account and getting the push-mail service but the App World, Facebook App BBM works not despite a BIS plan that supports the foregoing.

    With a strong carrier network (for example, not WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

    (1) registry HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    (2) Service reference books

    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    (3) restart to take batt

    • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then you should contact your mobile provider for formal support.

    Good luck!

  • BlackBerry Smartphones difference between 9300 and 9330

    I read here somewhere that the works of 6.0 newly released on the 9300.  There was a post saying that the same download would not work on the 9330 because device-specific software.  Other than the built-in memory, 256 k 512 k vs, what are the differences between phones?  They are so different that the code must be written specifically for each phone when the applications will work on 10, 15 or 25 different phones?

    Hello

    Each unique package of BB OS is specific to a model number... not a model family, the precise number. They are not interchangeable. You can compare more differences here:

    Good luck!

  • BlackBerry smartphones synchronization between BB and MS Office - "Unable to open default folder in the group"

    Has been able to sync without problem before Christmas.  Copied personal records on memory stick, then to the laptop.  Return process, reverse, Overwrite original files.

    Now unable to complete sync process and do not know what is happening.  Believe the items entered in Schedule BB have been removed in the synchronization process, but no message appeared to support.

    Software problem?  Restart the computer?  Reload the software?  Others?

    If the software, please give a link to the current version of the software for BB 8800.

    Very welcome thoughts.

    Hi and welcome to the forums!

    Here is the info about your error message.

    Basically, you want to try remove the intellisync folder and reconfigure the configuration settings.

    If the problem persists, you may need to remove specific databases on your device.

    Thank you

    Bifocals

    http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB03093&sliceId=1&docTy...

  • BlackBerry Smartphones connection between BB and MacBook

    so, I downloaded pocketmac for BB 4.1 and was able to sync once. the second time I plugged my BB to my mac via the usb port, it would not yet show any connection. When I try to sync in any case, it tells me that no device is found. Help, please. I love my mac and my BB and I don't want to have to switch to the iphone or the at & t.

    Thank you. in fact, what finally solved the problem was download (and, of course, to have bought for forty dollars) "missing sync" and use instead of pocketmac. work for now...

  • Microsoft Word compatibility between XP and Vista

    In our office we use Microsoft Office XP for our documents.  We correspond with a typist for some of our documents and it has Vista.  We received Word documents that should have degree symbols inserted as they appear on Vista, but when we get them in XP, they appear as "N".  When that we send it rejailliraient on it, it receives the document showing the symbol of the degree.

    Is it possible to fix or download anything to make it compatible?

    Thank you!

    ~ Kristin

    DELETED EMAIL

    This isn't a problem of Vista vs XP. You probably don't have the same font that uses the typist and your police is not the symbol of the degree. Ask him to type documents in a universally recognized as Times New Roman or Arial even police. MS - MVP - Elephant Boy computers - don't panic!

  • How can I configure a split screen to toggle between Thunderbird and Microsoft Word?

    I want to switch back in a split screen side by side with a screen of Microsoft Word. I want this in order to transfer an e-mail addresses already, to a Word document where I can change and rearrange the addresses and add other addresses.

    If you want problems. Copy and paste the addresses back and forth with Microsoft Word. Something like notepad may be appropriate. Word is not.

    Regarding the self organization of the windows. Microsoft which has deleted some versions there is according to me.

    Why not open the source of the message. Search the headers CC and BCC, the first lines and simply copy all addresses at a time. Are in the header on one line with a comma between them. Thunderbird user interface is not that you try to keep it simple.

  • Data Execution Prevention (DEP) and Microsoft Mail - Guard closing Mail!

    I use MS Vista Ultimate on my laptop.  Recently, I started having problems with MS Mail (no MS Office Outlook).  Whenever I create a new message and I am trying to attach a file, mail stops and I get the message that the DEP is stopped Mail to avoid damage!

    I have a scandisk to check for errors of aran and couldn't find any type of errors.

    I tried to turn off DEP for the mail, but I couldn't find the correct file.  Could you post the message the steps to disable DEP for the mail and please indicate the name of the file associated with the DEP by Mail?

    Thank you

    R.:

    Thank you Sir, that solved the problem.

    Fred

  • Conflict between McAfee and Microsoft Security Essentials?

    I installed Microsoft Security Essentials on a system that had McAfee.  I thought I had the features on McAfee off the coast.  I started a full scan with MSE.  He locks up in Microsoft/Installer, which is where McAfee says that he kept finding three horses of Troy, ZeroAccess.ee, ZeroAccess.eh and generic.DX!12536d125737.  I finished the scan, but now at startup, Windows says that it has identified a problem and you need to restart in one minute.  I discovered that when I made off McAfee, it was only 15 minutes, therefore, it was still running when MSE was running her scans.  Now all McAfee services are turned off, but the problem persists.  I guess that both programs are in conflict.  The one minute message that the computer will be restarted lights Mode safe as well.  I did a restore (Vista) system and still have the problem. I guess I should remove one of the security programs but do not know what should be my plan of action.  Any help?

    Repost - See the post from Stephen Boots and run one of these "hot" spares and potentially eliminating your malware problems: http://answers.microsoft.com/en-us/protect/forum/protect_scanning/apparently-got-a-virus-wednesday-discovered-it/a1c1f188-8895-4391-90ac-f3d4c2d76418

    Alternatively, if Malwarebytes could not find try TDSS Killer or Hitman Pro. But one of these rescue disks might be the best...

    Make sure that you have a good processor and 4 GB of RAM preference if you install Win 7.  If you reformat / reinstall the OS which should also remove the malware.

    Good luck...

  • Compatibility between CS4 and 5 images

    I am currently using for a project reccent Premiere Pro CS4 on a PC built at home with Windows 7 Pro (64 bit), I had a friend use his Canon camcorder. He imported the images for me using FCP and I wasn't able to use the images. Now, he'll try again with first CS5 on the Mac. I see no reason that its latest version of first will create suspends, but I need to trust that I won't ask him to re - capture video.

    So, here's my question: images of Will HDV captured on Adobe first can be used in Adobe Premiere CS4 CS5?

    I suspect that the files resulting will including .mpeg files similar to those created when I captured the other film HDV with PP CS4.

    I also assume that CS4 should be able to open any file .mpeg, especially those captured by another version of the software.

    If the answer is not... and my presumptions are incorrect please let know me ASAP so I can stop the last capture session.

    Note: we have overcome the issue of the transfer of files between the two systems (Mac uses the usses NTFS FAT 32 and Windows 7), so it won't be a problem.

    Thanks in advance

    Don't worry. Material captured with CS5 HDV is just as usable with CS4.

Maybe you are looking for

  • forget the ios 9.3.3 wireless network.

    In settings -> Wireless connection you used to be able to click on a network and the option "Forget network" would be displayed for this network.  Since I've upgraded to ios 9.3.3. the option "Forget network" seems to have disappeared.  Am unable to

  • Mini HP bios password

    Hi, I bougth a mini hp in a pawn shop, but I can not enter the bios to start. I get the following error: Fatal error... System stopped. CNU947934T any ideas?

  • Error 414 in Windows Vista Recovery disk

    I can't use the windows vista recovery disc because he meets the 414 error completely.

  • (Redirected) Reference Dell Enterprise Reporter

    I'm new on the Forum site.     We are currently testing the Dell Business Reporter tool.    I am a 10 month at a client project, and we have very specific needs, we strive to fill for the customer.    We would like to find someone to customize settin

  • Heat dissipation and the consumption of power for SG 100-24

    Hello I need to know the following information on the model of switch SG 100-24 - power consumption (watt) - thermal dissipation (BTU/hour) Please may somebody help me out on this ? (by the way such information is not in the Cisco documentation) Than