BlackBerry Smartphones not connect to the e-mail address of the server

Similar Questions

• BlackBerry smartphones not connected to the wireless network

  Hello
  I went to a BB tour and I'm trying to recover My World. Whenever I try to update my list, I get an error that says: 'we cannot retrieve your list. Please make sure that your device is on the wireless network.
  I can reinstall many of my applications, but there are themes that I bought that I now can't come back.
  No idea why I can't get my list?
  Thank you!

  Hey sorry,
  World of the BB app reloaded itself after a can of weeks but thank you

• BlackBerry Smartphones cannot connect to the server of BES of USA

  Hi all

  We are based in South Africa and our BES (Express) server is also in LSF, now my CEO just landed in USA but fails to communicate with our Server BES and have therefore no e-mail link.

  Is there a way to fix this? Can I change something on my side, or our cell phone provider?

  Thank you

  Hello

  Are you check with your carrier for roaming and the data roaming with the operator of mobile telephony in the United States (if your device in the United States while roaming), there can be also manually change to another mobile operator USA given roaming with your operator?

  other ways to work

• BlackBerry smartphones can not CONNECT to THE SERVER

  Hello need help. My Blackberry Curve 8520 (OS 5.0.0.1036) does not connect to the server. It shows my network (Vodafone) and gets a strong signal; makes and receives calls; connect wifi; but it is also completely static. After the first Setup email screen I get: your device has a connection to the server problm.  (I think it means the Blackberry server?)  So I can not connect any email.  Very well in my other near-identical Curve 8520 Sim Card work.  How can I do please?  Y at - it a reset or software update is complete I can undertake? Thank you, Michael

  I can help you with the it policy... lack of procedure for access to the BES server, this (and only this) cleanse a BB to an it policy:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  If you do a backup/restore, don't do this basically... rather, backup/restore only the databases specific you need (for example, calendar, contacts, messages, etc.) and more precisely to avoid data bases having something to with COMPUTER policy, business, etc.. If you restore those, the it policy will be conscientiously restored to the device, and you will be right where you are now.

  As for a BES Server trying to reach out... There is nothing that I can offer you. Your best bet is to talk to your provider and make sure you have no BES-level service enabled on your account of them. Who should (note 'should'... is there no guarantees) prevent a BES server to reach out and the reactivation of your device.

  Good luck!

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Unable to send emails, SMPT can not connect to the server

  I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

  I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

  Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

  Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

  Step 1

  In the Mail menu bar, select

  ▹ Connection Doctor window

  In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

  Select the Advanced tab in the settings for the account and check the box marked

  Automatically detect and maintain the account settings

  If it is not already done.

  If there is more than one account of the problem, repeat. Close the window and save the changes.

  Step 2

  Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

  If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

  Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

  Step 3

  Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

  SMTP.gmail.com

  Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

  Step 4

  If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

  The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

  Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

  If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

  Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

  You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

  Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

• Y at - it a setting or a config that keeps me from typing the actual numeric address of a Web site, after which he said "could not connect to the server?

  From time to time that I step a numeric address for a Web site in the address bar, but when I do, Firefox just freezes for a while, then says could not connect to the server. It's fishy. (hook.)

  What is the format that you use for the IP address?

  If I type 98.124.44.207 in the address bar, need me to google. It works for you?

• Thunderbird does not connect to the server after update to 24.4. How can I fix it?

  TBird updated today V24.4 on my desktop and now it does not connect to the server. I have V23.4 on my lap top and it works fine. Someone at - he had this problem and figured out how to fix it?

  Please check your anti-virus software.
  He may have detected a change and decided to not allow Thunderbird. He could therefore block Thunderbird.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• "Could not connect to the server Game Center"

  OK, so here's the deal:

  Im trying to connect to Game Center on my old phone to synchronize the progress of game. When I try to log in, it tells me that it could not connect to the server. I tried just about everything I could find on the Internet without success (discount and hard reboot reset settings do not work, and the servers are not enabled). Could someone tell me please how to fix this?

  iPhone 3GS, iOS 6.1.6

  Honestly, I don't want to hear that if you encounter the same problem, I just want to know how to solve this problem. Thanks in advance!

  Nevermind, it seems to have fixed itself.

• I have IE6. I need to install service pack 1 Windows XP. I can download it, but I can't install it because it does not connect to the server. How can I work around this problem?

  I recently had to use the restore disc that came with my computer. Accordingly, I now have Internet Explorer 6. To switch to IE7 or IE8, I need to reinstall the Service Packs. I can download them, but I can not install them because I have IE6 and downloads could not connect to the server. How can I fix?

  Hi wildcar

  You can go directly to Windows XP SP3 . Download and install it from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the text that says: it is only intended for Professional computer and network facilities.

  Important note: If your system has an AMD processor, download them and install Microsoft windows update utility for the processors not intel from the link below, before you install Windows XP SP3.

  Update for Windows XP (KB953356)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=23751

  After you are done you can try to install ie8 again, if it has not already been offered through windows update.

• WHS 'not connected to the server.

  Hello

  I have a HP485 with WHS (first version) connected to a PC running XP SP3. ESM used to work fine, but now the icon is gray and I get the message "not connected to the server. I have run the discovery and tried to connect with Windows Media Center Connector without success. On WHS, I have a blue light, no light network and the light pink of health. WHS is headless, but I can connect monitor and keyboard if necessary. I think it may have something to do with the AV expired on WHS but not positive software. Any help is appreciated.

  Thanks, but I posted a similar request it and received no help. I'll try somewhere else.

• OfficeJet6500A more - ePrint Setup error - this printer could not connect to the server

  My 6500 a is connected to the internet and I am able to print wireless.

  When you try to set up ePrint, I go through the following menu path: installing, configuring Web services, the printer email address.

  I get the message error "this printer could not connect to the server.

  I have read and tried the others 'solutions' on the plate that involved turning market eprint, crossing out-lit power cycles, turning wireless on and outside, turning on the printer and wait 5 minutes, restoration of factory settings...   Nothing works.

  Any ideas?

  From one day to the next it printed the ePrint address, so I guess that the problem was with the HP sever.

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• Application does not connect to the server using WAP2.0

  Hello

  I used following code to get the suffix of the url that is required to connect to the application server using WAP2.0

         if(CoverageInfo.isCoverageSufficient(CoverageInfo.COVERAGE_DIRECT))
          {
                  //WAP 2.0
              String uid = null;
              ServiceBook sb = ServiceBook.getSB();
              ServiceRecord[] records = sb.findRecordsByCid("WPTCP");
              for (int i = 0; i < records.length; i++) {
                  if (records[i].isValid() && !records[i].isDisabled()) {
                      if (records[i].getUid() != null &&
                          records[i].getUid().length() != 0) {
                          if ((records[i].getCid().toLowerCase().indexOf("wptcp") != -1) &&
                              (records[i].getUid().toLowerCase().indexOf("wifi") == -1) &&
                              (records[i].getUid().toLowerCase().indexOf("mms") == -1)   ) {
                              uid = records[i].getUid();
                              break;
                          }
                      }
                  }
              }
  
              if(uid!=null)
              {
                  if(AppConfigurations.DEBUG)
                      System.out.println("Connected using direct WAP2.0....");
                  return ";ConnectionUID="+uid;
              }
          }
  

  I am same ConnectionUID as present in this complete book in Options in the device.

  Even application does not connect to the server using WAP2.0.

  Let me know what other things should I check to make application to connect to the server using WAP2.0.

  My phone is BB 8900 and OS 4.6.1

  WAP connection will pass through the gateway of the carrier.  This gateway can oppose your respect, or might be trying to optimize the data, or can display a login page for you.  Try the same URL that you use in your program, directly with the WAP browser on the device and see if that runs through effectively.