BlackBerry Smartphones OS6 - BUGS

Hello

I'll have too much trouble after upgrade to the new OS 6.

1 calls telephone SFOE has not end immediately after that I drop - pressing the red button. Sometimes, I have to wait 10-15 seconds to return to normal - sleep state.

2 rejection of phone to connect to my kit car Bluetooth.  Of course the version of the software is changed, and when I am trying to connect.

3. a single theme is available and it is without my notice today. I bought passport a few new themes but they do not appear in the list of themes...

UGLY!

Please help me to solve some problems or to reach OS5

Thanks in advance!

3. the OS6 theme kit only became available a few weeks before. Perhaps additional topics that you have installed are NOT compatible OS6.

If you want to downgrade the operating system:

1. If the most recent operating system is installed on your PC, delete the most recent operating system of your PC by going to control panel > Add/Remove programs.

2. next, download and install the earlier version of the operating system. Operating system blackBerry downloads

3. install the older operating system to the computer by running (double click) the downloaded file.
4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."
5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry smartphones various bugs

    I am without the use of a Palm PDA to a Blackberry Storm.  I used memos to contain a lot of information for me; some of which I've often updated.

    Memo list screen:

    1. Although the filter is a pretty nice feature to drill down to the note that you want to change, it would be nicer if there was a scroll bar on the right side of the screen so that you could quickly drag it to the approximate location.  It would be much faster to enter a filter.  There is a scroll bar appearing on the right side of the screen, but it doesn't do anything else than to display; He has apparently no use.

    MEMO Editor:

    1. I discovered that although I can view the whole memo in MS Outlook, the storm would show me only about 20 k to a value of each file.  I had to split up dozens of memos, so that all the information would be visible and editable on my Storm.  When this limit will be increased?  Or how to increase the limit?

    2. a supplementary bill bug is in landscape mode it does not scroll properly.  When you drag your finger up and down to scroll a page it works sometimes and then other times it suddenly takes back you to the top of the memo (this after you have navigated to the bottom of 10 screens).  I think that happens when I touch the screen lightly, he seems to think that I want to edit the memo rather than the cursor is when you first open the memo.  This problem does not occur in Portrait mode.

    3. There is no scroll bar on the right side of the screen you can drag quickly position the screen in the middle of a 20 k file.  Instead, one must drag one screen at a time...

    4. in addition, there are no icon, or something to allow you to take you immediately to the top or bottom of a memo.

    Password feature?

    1. the storm block even if I have not pressed the lock button, or press the lock icon.  I would have preferred that it crashes only when I want it.  It's annoying that almost every time I have to pull it out of my Holster that I have to unlock it.

    Phone Bug

    1. when I call my voicemail, Messaging voice robo-voice invited me to enter my password followed of the #, but it does not display the keyboard for me and at the time where I can get the keyboard displayed the robo-voice has run out of patience and informs me that I am too late.  However, I have concluded that the appropriate setting and so it should not invite me, does it?

    I suggest you use DocumentsToGo instead of memos... and use any PC Sync app on the PC folder to synchronize documents between your PC and your press card. Much more DocToGo function.

    The confinement, to by pressing the locking button on collecting in your case. It is on the top edge of the BB, be aware of this and you should not have any future problems there. I never locked onto the extraction of the Holster.

    For voicemail, you should be able to program your password in the dial string and end with you enter it manually.

    Good luck.

  • Update blackBerry Smartphones os6 and all I have is black screen reset/reload 'Blackberry '.

    I have a Bold 9650 and last night I updated to OS6, the undate seemed to go ok, I even had a little video to show the features, but then he told me that I had to update my email addresses, and when I did I was told to reboot to complete the update.  At this point I got was the start to the top/reload screen that says Blackberry with the white flag of the restart procedure.  The complete line indicating that the process is complete, but it is stuck on this screen.

    I have taken the battery several times, and the same process is repeated.  Any ideas on how to get my phone working again?

    Thank you!

    Thank you very much for this information.  It was my original plan, but I didn't know how to go on this issue.

    I ended up going in Blackberry Desktop Software and applications, I noticed that I had 2 email, configure applications.  Since this is what I was doing when it failed, I removed the older (thought it was probably the surplus OS5 and incompatible with the new OS) and it worked.  I did a restore and everything seems to work fine now.  And I'm diggin' OS6!

    Thanks again!

  • BlackBerry Smartphones OS6

    Hi, works on OS5 or OS6 9300?

    No, sorry but 9300 is not compatible with OS7

    Ron

  • Sync blackBerry Smartphones Contact bug

    I'm under version 4.7.0.75 and sync with my macbook using Mark/Space software, and it seems to have found a serious error in the Blackberry OS. My phone dropped from contacts, and apparently the ones I use most, and when I enter a new contact it it duplicates automatically many times. If I replace the contacts of my computer, which should not, but none it throws an error. Yesterday I reset all my computer and complete timing information a soft reboot on the blackberry. When it restarted, he showed me this error "Exception Java.lang.NullPointer" of ideas? An update would fix this? It seems that I can't use any OS 'leak' since I use a mac.

    I found a solution on my own. It's kind of frustrating lack of communication and support of BlackBerry and Verizon on this issue. I'm frankly surprised by the lack of response of this (because I was moved without explanation) forum. Maybe I don't know the secret handshake.

    In any case, be an honest man and thinking that others may have the same problem, I thought I would post my solution.

    The Verizon store wanted me to clear my phone and start over, and I refused to accept it, then...

    I had to find a PC running windows and internet explore downgrade my software to the previous version 4.7.65, then re - sync using Mark/Space software, crushing my contacts. My next step is now to upgrade to 4.7.75 and see how it goes. But for now I'm happy to have my phone back and properly functioning.

    Jon

  • Question of blackBerry Smartphones OS6


    You will need to should not change the permissions on the AppWorld. Do not.

    Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart. A reboot in this manner is prescribed for most defects and errors of operating system, and you will lose any data on the device doing so.

    Now look around icon AppWorld once again, check your tab ALL on the home screen.

    If you still don't see it, use your BlackBerry browser to go to the www.blackberry.com/appworld and download again.

  • Minimum requirements of blackBerry Smartphones OS6

    Hi guys, I apologize if I am in the wrong forum, but it's just where my bookmark me!

    My companion wants to update his Storm2 OS6, and told him that he cannot because of memory and the speed etc. but he always wants

    I was wondering if it is possible to install OS6 on the storm, if yes, what are the minimum memory requirements etc.!

    Thanks, Ben

    Welllll...

    The first obstacle that will be no. operating system v6 has been published (or even filtered) for the Storm2 (9550 and 9520).

    The second obstacle will be that unless something changes magically on the Storm2 (9550 and 9520) material, as the memory of the camera more, there will be no OS6 for Storm2. Just little unlikely to occur.

  • Questions of 0.448 browser blackBerry Smartphones OS6

    Difficulties with the browser OS6, I often receive alerts that the page that I am trying to load is too big and it will be closed. I also have alerts do not have enough memory to open the pages and I have also problems with the browser close without warning.

    First of all the memory. Before loading 6 that I ensured that all unnecessary apps have been removed, ultimately send me some 84 MB of free space. Machine center, I think I was in the middle of 50 MB, but not too sure. After a while my available memory has fluctuated between 35-45MBs but never below it. Once that memory problems began to occur that I deleted more apps to get my free space to 55MBs, this still does not resolve the issue.

    A friend suggested that unexpected closures could be due to the execution of Java. I had never allowed 5 and have not checked to see if it is enabled on the update, but my point is that an update should be improved not a downgrade if it is being run or not. I can barely go 2 pages without the browser closing for one reason or another and it's not as if I visit sites that have a visual content or high audio.

    Anyway, any help is appreciated before I have 5 retro!

    Cheers, Jonesy.

    P.S. I'm in love with 6 other than the browser!

    I have solved the problem by installing RAM Optimizer BBAW. Works well and invisibly.

    To answer your questions, I use a 9700 and accidents do not seem to occur on any site. One was a constant however, Google Images. The browser opens the first page, but if you scroll further down, it would break unexpectedly or I would get the "page too large" or "low memory" warnings. Now, everything seems to work much more smooth than before.

    Thanks for asking in any case!

  • BlackBerry Smartphones OS6 on BB 9300 curve?

    Is it possible to install the BB OS 6 on the 9300 tank?

    And if so, where to download from. Thank you.

    The Curve 9300 has 256 MB of memory onboard, which is half of the memory of any phone comes with OS 6.  You really need to the full 512 MB to avoid freezing upwards, trolling and general bad operation of the phone.

    I do not recommend upgrading the OS 6 on a 9300; You'll no doubt regret.  Of course, don't take my word for it, ask around you and look through these forums for any phone 256 MB that users have tried to switch to OS 6 and see what they have to say about it.

    I hope that helps you.

  • BlackBerry Smartphones FACEBOOK BUG

    I keep having trouble with facebook, and I think it's the new version since it has never happened before.  If I download a picture it freezes completely, then I lose any connection.  Facebook is still there but I get my notifications, its lack in the settings sound and is missing in the list when I want to upload a photo.  Ive done the traction battery and all, only way to make it work again is to remove and reinstall but ive done this several times now and his past still... Help!

    I thought about her, just had to relog in

  • Bugs blackBerry smartphones? the 9810 torch?

    Hello

    I've been playing with my new torch 9810 and now the battery seems to be draining like crazy (up to 10% after having just three hours hanging out, not a single call done) - and some programs play AND I get a message indicating that the camera photo and video camera are in use although I'm not using the.

    Is there a virus on this thingy? -How do I know? has someone hijacked my camera to spy on me?

    a little paranoid, hoping for help!

    Thank you

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

  • BlackBerry Smartphones Blackberry 9900 Notification problem

    Excuse me, I have a blackberry with OS 7.1 9900

    and I have a problem of notification, which occur when there is a bbm / fb / nothing else.

    When I click on this notification in the bar notifcation, it act normally and then open the message / fb / bbm / whatever it is,.

    and when I've done and press the back button to go to the home screen, the notification is still there. always in the toolbar State, but the icon in the notification already bar disappears, until I have shut the drawer and open it again to she disappear. How to fix this bug? usually, I restart my phone and it works. but another 10 minutes, the problem comes again.

    This bug is reallly annoying me. Please give me a solution. Thank you

    I attach a picture so that it appears clearly.

    -C' came then BBM, * Picture1 *.

    - and I click on the notification * Picture2 *.

    -Once finished with bbm - ing, I press return to go to the home screen, but it was still there! (but the icon already gone) * photo3 *.

    -before I close once again, the notification * Picture4 *.

    -I open it again and it's already gone * photo 5 *.






    Hello

    FYI - Your indignation is misplaced. This site has nothing to do with any formal support. On the contrary, this site is a community of users to volunteers who do their best, while also living their own lives occupied, to troubleshoot other kind souls to the best of their ability. There is no requirement for all voluntary meet any position whether... everything is voluntary, which is given to you by the goodness of their hearts. All they ever receive in return is gratitude... so unworthy of these volunteers can be a bit off-putting, I think.

    In any case you say you reboot and for a while, things are OK, but then the problem shows once again. Which could be a few different things... a bad OS... a bad app behave... maybe same material (although I doubt that your description so far).

    Have you checked for an OS updated for your BB? Since you said only 7.1 (OS levels have 4 bytes, not 2) and later does not reveal your carrier, there is no way to help you... but you can help you in this regard:

    Good luck!

  • Phone and blackBerry Smartphone installation last firmware update starts

    Info on the device

    Carrier: Bell

    Model: BlackBerry Bold 9780

    OS version: 6... something

    I have BlackBerry Protect and made a backup yesterday (July 30, 2012)

    Apps and free space

    A battery pull fix your problem?  After trying to install the latest update, which continued to install after 4 hours, I pulled the battery.

    When you write your question

    How can I get the load to the top of the screen to access my phone?

    My phone had OS6 installed at the time it was released. Today, I decided to update to the latest version of the OS6. I downloaded the update through my device, and then click the button install. There is a prompt message warning that the installation can take 2 hours or more. After 2 hours, I started the monitoring device and noticed that there seems to be a pattern to the load up screen. 1 loading screen screen 2) black with LED light red 3) the load screen and then ends with a bright white screen 4) back to the black screen with LED Red 5) repeat this pattern.  I waited another hour to see if there was no change in the situation, but nothing. So I did a hard reset (battery pull). After waiting 5 minutes, I put the battery in and now I get this screen load pattern.

    How can I pass the loading screens to access my phone again?

    How do I erase and reload my camera?

    If I erase and reload my camera, can I recharge my BlackBerry protect the back upward?

    I would greatly appreciate any help or advice on this matter as soon as POSSIBLE!

    Hello and welcome to the community!

    (Credit JSanders)

    There are two methods for recovering for you to try:

    One:

    • Open Blackberry Desktop Software & connect your device with the PC using the USB cable, without inserting the battery.
    • You have three Retry option, update or cancel, and then click Update.
    • Once it is at the stage of the "initialization of pocket" update, then insert the batteries.
    • If this does not work, and you get stuck on the safeguarding of social data feeds, go to the second method below.

    Second:

    • Start your BlackBerry in safe mode.  Article ID: KB17877 how to start a mode BlackBerry smartphone without failurehttp://www.blackberry.com/btsc/KB17877
    • Connect to the BlackBerry Desktop Software and allow handheld to connect. If you are prompted to update, cancel the upgrade for later.
    • IF you can not connect or your desktop software does not recognize your device in Mode safe, please follow the instructions here to force detection: Article ID: KB10144 how to force detect the BlackBerry smartphone using the Application Loader
    • Go to device > delete > SELECT DATA > select this option to remove the Social flow and smart card data bases and follow the rest invites you to complete.
    • Now, you can go back and click to update the device through the Desktop Manager, or restart the BlackBerry in normal mode and continue on the upgrade of the air.

  • Error of BlackBerryID blackBerry Smartphones and to protect

    I received a notice to upgrade BlackBerry ID.

    I did it.

    Was then reboot needed. Restarts OK.

    NOW I have a updated BlackberryID but disabled BBProtect

    Protect wants latest BBID, but when a window appear to download a new version of BBID the result is "there no new version for BBID' (I have just one last)

    BBM also wants the new version of BBID.

    I tried to reinstal Protect: impossible

    Protect the Web works in all functions: find, sing the ear and send the message to the device.

    What is the solution?

    giuliano1969 wrote:

    In the first and the second time I tried 5 steps THAT BBID has been installed (downloaded on Appworld), but in other attempts BBID does download no BBID more.

    "attempts"? I don't understand...

    giuliano1969 wrote:

    My company does not help me for the specific App problem to my terminal.

    There is no sound wireless problem or a bug.

    In fact, the one that your provider tells you is wrong. Your carrier is responsible for the delivery of all services on your device, which is BBID to 100%. As a result, they are also 100% responsible for all official support for all services you pay for. Consider... you don't pay them... and they deliver. Only, they (your operator) have access to their systems to verify what is happening. Only they (your operator) have access to the formal escalation chain so that your problem could receive official assistance from BlackBerry. Please see this "sticky" post, and the son to which it connects, for more useful information to guide you as you go:

    I hope that this information will be useful to you.

    If you want yet to try to seek a formal support, then your next step would be a full reload of the OS on your device. If you want to try that, then please conduct and first review the backup process discussed via the link below in my sig auto on this post.

    Once you have a full backup, then the easiest way is to, on a PC (you can't do this on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

  • BlackBerry smartphones please help me

    HY,

    Translation by Google:

    Everything began to be replaced by an old mobile Blackberry Curve 9300 for a new 9300
    Initially, I connect my old laptop to perform a backup.
    I connect the new and restored with the old backup.
    And starting problems:
    Initially I have found all my applications, after a ride on this forum B and am active Blackberry option. I thought that I had on my old laptop...
    But I'm still all of the missing Blackberry universe.

    I connect my Blackberry Desktop, it tells me I can do an update from 5.0 to 1419 Pack Update pack 6.0 1879.

    But the problem and not the update bug.

    Following error message:

    An update to the Blackberry Desktop software component must be installed before proceeding. I'm okay then after seconds qqs:

    An error occurred during the update of your software
    The list of applications on your device is have been downloaded.

    However, I take things and I have zero reset my laptop with a factory reset.
    I past either directly through the laptop and the laptop tells me that there is no update available.
    So at the moment no update my software.

    Then I try to reopen a Blackberry ID session and still the problem:

    I know that my email user, I maintain the Blacberry ID confirmation email, but I forgot the password.
    I requested a new password, he asked me the secret question. I answer and it crashes with the following messages:

    You have reached the maximum number of authentication attempts with your credentials. For security reasons, this feature has been blocked for 15 minutes.
    or else
    You have reached the maximum number of authentication attempts with your credentials. For security reasons, this feature has been locked. If you have forgotten your password, use her you forgot your password feature to select another.

    What should I do?

    Please help me!

    Hello and welcome to the community!

    You have a lot of questions... so it is difficult to separate. I'll try both, I think I can identify:

    Please see this post "sticky" for useful information about your situation BBID:

    I hope that this information will be useful to you.

    With respect to the update/reload of your operating system, the easiest way is on a PC (you can't do this on MAC):

    (1) make sure that you have a current backup and your BB complete... you can find the instructions at the link in my auto-sig below.

    2) uninstall all the BB OS packages from your PC,

    (3) make sure you have the BB Desktop Software already installed

    (4) download and install on your computer, the BB OS package you want:

    • http://us.BlackBerry.com/support/downloads/download_sites.jsp
    • If all you want are the levels of BONE, it is first sorted by carrier - the carrier supports, your search will be fast. However, some carriers are much slower than others to release updates. To really get the package up-to-date OS for your BB, you need to dig through and find all businesses that support your specific model BB and then compare the BONE levels they support.

    5) remove all copies of the SELLER on your PC. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

    6 (a) to change your level of BB OS installed (at level or lower), you can run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC.

    6 (b) or, for recharging your BB OS level installed as well to change, work around the Desktop software and use the CHARGER. EXE directly, through step 2 in this process:

    If, during the process of 6a or 6 b, your BB has an error '507', simply unplug the USB of the BB cord and reinsert it. do nothing else... This should allow the installation to continue.

    You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

    You can also try the "skeleton OS Reload procedure" in an attempt to circumscribe the precise causal element:

    1. Load your OS "bare bones"... If everything is optional, do not install it.
    2. If the behavior is immediately, then try another OS with step 1
    3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
    4. Add one more thing - no matter how tempting, one.
    5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
    6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

    When the behavior shows up, you know the culprit... the last thing you have loaded.

    If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

    If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

    You may also use these tips:

    If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

    • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

    Good luck and let us know!

Maybe you are looking for