BlackBerry Smartphones phone won't boot to the top

I downloaded a few applications to Blackberry World on my night of phone. One was booster. When I tried to open it I got an error message saying something about Java, and after failed attempts to open it, I deleted it. The other was AP Reader. I just tried to open it for the first time this morning. When I clicked on it, the phone started to reboot. He took an unusually long time to restart, then I put down and came back some time later. When I picked up, he seemed to be in the off position. I tried to turn it back on but nothing happened. So I took the battery out and put back. The fire came, stayed on a minute or two, but instead of booting, the phone is off again. I tried to remove the SIM card as well as the battery and then replace both, but he got the same results. I can't even reset the phone to default settings because I can't seem to start. Help! What can I do?

Sometimes you gotta try some variations... If you have tried only twice, you did not probably not enough variations. I remember a device where I had to wait for the touchscreen to become active, hold down the ESCAPE key for about 50% of the loading bar, release, then press and hold again close to 80% to 90%. A strange sequence, but it worked for me.

If you don't want to keep trying, your only recourse will be more drastic... I hope you have a good backup, as it is unlikely that you will be able to get one now.

You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

Good luck and let us know!

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones Blackberry Torch 9800 won't boot to the top

    Well, I was installing Fandango and once it has been done download the phone turns off to reboot and the screen lights up and down the bar showing the loading progress was going well and all and then it happens to about 3/4 in fact, then it stops and starts again and it does the same thing over and over again. descends from 3/4 stops. I tried pulling the battery and it has not made a difference. So I tried to remove the battery and just letting it sit for awhile, still nothing. Tried to reboot, still nothing. So I tried to connect to the computer to reset it and restore the operating system, but it does not connect. I bought in January, but I did not like the other warranty... It should still be under warranty for manufactures but...

    You are able to reboot your device in SafeMode as shown in KB17877?

    I guess, because it is taken in a reboot cycle, when you connect to the desktop software it does not have a stable connection to reinstall your software?

    If this is the case, remove the battery and keep it off when you connect to the desktop software. You will get a pop up that the device cannot connect and there should be buttons retry, update and cancel. Select Update and you will then be able to reinstall the latest version of the device software.

    When the load progresses, you will see a step that says "waiting for initialization of the devices '. At this point, insert the battery and recharging must complete.

  • Satellite C50 won't boot to the top

    Hello

    My son satellite C50 won't boot to the top. It is connected to the power grid and will arrive at the password screen but as soon as you type goes into shutdown. Any suggestions please?

    Thanks in advance.

    You write about Windows or BIOS password?

    In any case, on this virtual path, it is not easy to give an exact explanation what can be wrong there.
    Your son of many important data stored on this machine? If this isn't the case, you should try to reinstall the OS and test it with the factory settings.

    What you can try is to enter the BIOS settings and leave the machine 5 minutes to see if cell phone will go OFF. If this isn't the case, set the BIOS to the default settings and try again.

    Is the cooling fan may be strong at the start of the machine?

  • My Satellite C660-155 won't boot to the top

    My laptop Toshiba Satellite C660-155 won't boot to the top. When I turn it on, I get a flashing "-" at the top left, then the screen goes black and nothing happens after that. It's more than a year, which means he went from his guarantee.

    It happened already, about 4-6 weeks, a friend fixed but it is now back to the black screen.
    Any advice would be greatly appreciated.

    For better understanding, you must offer more specific information.
    You can enter boot options using F8 at startup?
    Figure option fix my computer in the list?
    You can boot OS in safe mode?

    Did you create the recovery disk?

  • Satellite L20 260 won't boot to the top, every time it freezes with no reason

    Hi all

    I have a problem with my satellite of sad, after 3-4 days I installed a new operating system (tried with XP SP2 and Kubuntu) system does not boot to the top, every time it freezes with no reason, the only way is to perferom a new installation of the OS. What is a hardware problem, perhaps related to the RAM or HARD drive?
    x 10, Daniele.

    Hello

    It's not easy to tell if the problem is software or hardware related.
    You must install the OS from the Toshiba Recovery CD and again test the functionality

    If the laptop won't boot again freezes immediately after that installation of recovery CD, and then it could be a hardware problem.
    You can try using MemTest 3.5 tool.
    It checks the memory of a malfunction.

  • BlackBerry phone Z10 won't boot to the top

    Hi, when I turn on my phone it starts up to the Blackberry Logo and it loads very very slow and it gets stuck at 99% of loading the OS for more than 5 hours.

    Help, please.

    Kind regards

    First of all, I would like to remove the microSD card, if you use one and try again. Otherwise, I hope that you have a recent backup.

    I would try a clean OS reload. http://www.BlackBerry.com/BTSC/KB34045

  • BlackBerry Smartphones wallpaper won't stay on the home screen after pressing the battery

    I'm really starting to get annoyed with this phone!

    My wallpaper will not stay on my homescreen after a battery pull or a software reset! I don't understand! This is not new in terms of programming! What is the problem? Is there any solution for this or I'm stuck affecting my wallpaper everytime I reset my phone? Go RIM! It is a ridiculous problem that should have been fix before going out the phone! same for 5-10 sec freeze after you enter your security password to unlock the phone! As well as the slow transformation of cpu for some activities! I'm sticking with this phone at the moment, but I don't have a great feeling for this phone seriously!

    Does anyone know what I should do to fix my bottom screen problem?

    Hi once again, everything

    I have foud a solution for my problem!

    By installing the application to the os 6 given by the carrier, I was able to solve this problem! So, I backed up my data first and then downloaded from the EDGE of the application OS 6 AT & T then re-installed and erased all the data! After I reloaded the data I needed and tested! Now my loads of wallpaper is a reboot of the device! But I always saved my image on the internal memory of the phone and not the micro SD! I don't know if you leave image on micro SD so it will again make the same question!

    Thank you all for the help!

  • Re: My Satellite P200 won't boot to the top

    Hi all
    Noobie here,
    I think I caused a problem wher my P200, it won't start, it was very slow and I went into the Task Manager and deleted some programs that were not running, but using the memory.
    In my view, there is a good chance I can I have deleted something that the system needs because it will not load upward.
    I turn it on and I get a light on the HARD drive to the front and a light in the dvd drive, but nothing else, I tried pressing F8 and put the recovery disc in but nothing?

    Anyone have any ideas?

    Appreciate any help.
    John

    I guess you are using the "F8" key to access Windows boot options and Windows is not to leave you. If this of * definitely * the case, then you must insert the recovery CD and change the device to boot from the screen as the laptop boot - can't remember which affects it is than its displayed on the bottom line. I think its possible that W7 can be repair o the problem and a full installation will be unnecessary

  • Acer Aspire won't boot to the top! Help please!

    Hello! I really hope you can help me on that because I don't know what to do... so this is what happened: I was playing a game heard music etc. (laptop: Acer Aspire E1 - 772G). However nothing happened, but then 2 minutes after my laptop froze and I waited patiently. After some time, he said something I don't remember and at first there was a sad Smiley biiig [ ]. downstairs he said some .sys arrested or something, I don't know... However, I turned off my phone and he did it again. Normally there must be the Acer's Logo and a Slogan just after clicking the power button, and some quarters would begin to turn around. Well this time it was no small circles and I started worrying. After like 1 Minute of waiting my screen just blacked out and 2 seconds after the logo was back once again, but without the circles. Then a black and blue message popped up, which says: "boot device by default lack or failed to initialize. Insert the recovery media"(I don't remember the rest). Well what I have tried is the following:
    ALT + F10 (absolutely no reaction)
    F8 or F12 don't know (shows me the error Code and what to do. He also says to put in my Windows installation, which I did not. I don't have any recovery media)

    After the message appeared I pressed Enter, and there was a menu where I couldn't do anything. He only told me to press any key, if I put in any recovery media. As I said I didn't, so I just close the laptop. After that, I pressed the power button to restart my laptop... Well, it was the same thing. After that, I turn it off again and tried the things I listed before. I hope you can help me, quick if possible I need my laptop for many other things that are more important than to play haha ^ ^

    I look forward to a quick response,
    iSpextor

    try to boot to the BIOS by pressing F2 at startup, check on the home page if your HARD drive is listed.

    If it listed to go to the exit of tav and choose load setup default, press F10, Save and exit

    try to start

    If you still having problem with missing starting device, your HARD drive is probably dead or having some bad problems; If you are still under warranty, please contact Acer support.

  • My desktop won't boot to the top

    My desktop won't boot up it crosses the safe mode screen, acts as if it is loading windows displays the windows screen is then empty, followed by a very quick flash of the message on a blue screen: "the registry cannot load the hive (file): \systemroot\system32\config\software or its log or replacing."  It is damaged, missing, or not accessible in writing. "Then, he repeats the cycle.

    How to recover a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545 TaurArian [MVP] 2005-2010 - Update Services

  • Problems of blackBerry Smartphones with screen by dragging to the top of my Blackberry Torch 9800

    My carrier: three

    Operating system version 6.0.0.570

    Model: Blackberry Torch 9800

    I tried a battery pull.

    I'm guessing that whenever I slide my phone to the top of theres only a kind of contact fault because when I do, the screen goes black, as if locked. Although when the unit is in its default drag to the bottom of the post its perfectly fine. I have no idea what to do, but any help is appreciated, thanks.

    Looks like a hardware problem.  You can take it to the store or authorized repair shop?

  • Satellite P100-434 won't boot to the top

    Hi Ive got a Satellite P100-434 and Ive had for more than a year.

    Unfortunately today I couldn't get started.

    The power led lights up, the HARD drive makes light very briefly.
    The display lights. If she does not even there to boot in the bios.

    Any idea what the problem might be? Im hoping that the CPU or the motherboard is not fried.

    see you soon

    John

    Unless you bought the extended warranty, I don't think you have a lot of luck. My suggestion is to return to the place of purchase, if you still have warranty.

    However, try to remove the battery for 1 minute and then replace the battery again. Try it turn on.

    Also try with the power cable plugged in power and remove the battery.

    If all else fails, then you have a very expensive paper weight.

    Good luck.

  • Satellite A30 won't boot to the top

    My computer does not start at the top. Yesterday, I had the blue screen but then restarted and everything was OK. Woke up this morning to the computer does not start. I have a Toshiba Satellite A30. I got the Toshiba screen, then the black screen to choose 'Start normally', 'last good settings', 'safe mode', "safe mode with network" etc.

    I chose normal startup, then I get the Windows XP screen with the blue bar. When that has been loaded, he went back to the initial screen for Toshiba and then continues to repeat. I also tried safe mode, but that charge or the other.

    What should I do? I don't want to erase the hard drive because there a lot of important data (family photos, work) etc. Please help me

    Thank you!

    You can remove the HARD 2.5 laptop drive and you can connect it via USB to another PC. Then you may be able to save any important files.
    After this procedure the plug back in the HARD drive and boot from the recovery CD to reinstall the OS.

  • Satellite L350 won't boot to the top

    Satellite L350 my daughter does not start. When you press the power button, the HARD drive light and there is no HD activity. Something that was noted is that the battery is fully charged a couple of days, but today when I tried to boot up the laptop, the battery led shows that it is unloaded. Does anyone know a remedy to fix the problem?

    Sorry, but I still don t understand what happening exactly when you try to start the laptop.
    Remove the battery and connect the laptop on AC power only. When you do this press power button to start the laptop.

    What exactly happens? You don't see anything on the screen?

  • My Sat Pro M40X won't boot to the top

    I have a new laptop of MX40, and it starts up at all when I turn on the power.

    Most of the time it won't do anything, not even open the test page, and the screen remains black.

    However, sometimes it will start by a long beep, then two short. You can here to windows that open towards the top, but the screen remains black.

    Anyone any idea how I can fix this.

    Thank you

    Dave

    Hi Dave,.

    This is a hardware failure (as indicated by beeps when you turn on) and indicates that a component has failed to POST.

    As the device is new I would stay there a repairer authorized for repair under warranty or outlet where it was purchased.

    Kind regards

Maybe you are looking for

  • How to prevent the creation of 15000 files for 300 MB each day Firefox

    Firefox creates files of 'file' in C:\Users\LeRicain\AppData\Local\Mozilla\Firefox\Profiles\dnm04rk5.default\cache2There are about 10,000 and 20,000 files I have to remove to get about 300 MB of space each day How to prevent the creation of these fil

  • FPGA to generate the counter and pulse train

    Hello I have some experience with Quartus, but new on the FPGA OR. I have a PCI-7811R. I'm trying to use it to illuminate sequentially 144 LEDs repeatedly. The duration of each pulse is 480us. Basically, I need to generate a pulse and generator of a

  • writing lpt1

    Hello I would like to order a multiplexer tinsley intaglio lpt port I tried to write to lpt1 parallel port, but labview send me a 1073807339 error which indicate a timeout, I use a 5s timeout but error still there I m missing, you have same error wit

  • DeskJet F4272: Deskjet F4272 need driver WIA

    I had no problem with my all-in-one for several years until yesterday.  I'm trying to scan a document and it tells me that I need a WIA driver.  I downloaded the latest version of the drivers for this model, and it doesn't always, always get the same

  • P8253 - Programmable timer

    Hello to you all,. I'm looking for a model of simulation for the Programmable interval timer 8253 (or similar). I have it in a system for the acquisition of data with which I work. The point is that I don't need the feature itself. I is not serious i