BlackBerry Smartphones Run Time error - cannot sync calendar or contcts

Similar Questions

• Problems of synchronization to blackBerry Smartphones: Run Time Error when MS Outlook is applied

  I just got the Curve 8330 and recorded the telephone and e-mail. I had an older Blackberry and my outlook 2003 address book and calendar synced perfectly using Desktop Manager. I installed the latest version supplied on cd-rom with the curve and the installation was successful. I then tried to set up sync and tried to apply the synchronization with ms outlook and that's when the problem occurred.

  1. I opened the Desktop Manager and clicked on sync.

  2 click on the albums configuration tab

  3. I then clicked on configure synchronization.

  4 selected address book

  5. the next page listed available desktop applications and I chose MS Outlook

  6 then I select the two-way synchronization

  7. after clicking Next, I get this ERROR of EXECUTION: section of the Application is not based on files.

  I tried to uninstall the Office Director and reinstalled from the blackberry website. Still, I got the same message. Then I found the link below and concluded that there are ducts that connect the Outlook for Office Manager and for some reason, there is an error that is there. I did not quite understand how to solve the problem of the information provided on the troubleshooting link. I could not add the link that has been interrupted or lost by installing the new Manger of office. The link I found is below and I was wondering if there was a way to manually bind the office and Outlook. Please provide a way that novice computer person can implement.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15303&sliceId=SAL_Pub...

  Here's an overview of what you need to do (a translation of the article you linked)

  Windows XP: go to start, run and type cmd

  Windows Vista - go to start, programs, accessories, right-click on command prompt and select run as administrator

  In the command line window, type the following:

  CD "\Program Files\Research in Motion\BlackBerry\Connectors\MS Outlook Connector"

  regsvr32-u ilxolkCompanion.fil

  CD "\Program Files\Research in Motion\BlackBerry\IS71 Connectors\MS Outlook Connector"

  regsvr32 msoutlookconnector.fil

  See you soon!

• BlackBerry Smartphones run-time error when you try to synchronize the Blackberry

  I recently updated from the Blackberry pearl for the "BOLD" with the new desktop software. Since the upgrade, I am more able to synchronize microsoft Outlook for my Blackberry "BOLD". When you try to configure the synchronization I recievethe Runtime error:

  Impossible to find in the file system table. I tried all kinds of patches without solution, does anyone have any suggestions?

  Hi and welcome to the Forums!

  I found this KB, although the wording of the error is just a bit different... but maybe it'll help?

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB15278&SLIC...

  Good luck!

• BlackBerry Smartphones connector specific error when sync with Outlook calendar

  Installed Outlook2007.  Address, tasks, and notes will be synchronize everything with my BB 8830.  However, the calendar gives me an error message;  "Connector specific error" after reading the calendar of my camera.  The entire synchronization process stops.  When I uncheck the 'calendar', then the rest of the shares will be synced to the top.  Any ideas?

  Hi and welcome to the forums!

  Here is an article on how to solve the problem.

  Thank you

  Bifocals

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB15294&sliceId=SAL_Pub...

• Spaces of blackBerry Smartphones between times consecutive appointment in calendar view

  I hope someone can help me with this.  When I go back to back (which I have throughout the day), there is a space between them and it drives me crazy.  I can't take a look at my calendar and see the available hours.  I tried to use the view of the order of the day without end of time, but this does not work as well in trying new appointments.  I'd appreciate any help I could get with that.  Thank you.

  Hi self,.

  self wrote:

  Dear Mr. bifocals, (MR. Bifocals is my father, I'm just bifocals)

  Bless you for trying to help me with this.  I was able to get the order of the day see myself earlier, and removing the time from the end of the app'ts has helped a little more.  But I really like being able to watch throughout the day (in daily view), so I can really see what is happening.  I never had a calendar that put unnecessary spaces between sequential appointments. I guess it's a matter of personal preference. I actually like

  the spaces. For me each appointment stands out better.

  I think that the other Blackberry phones do not have this problem.  Is this correct?  You know a way to send the application to Blackberry? I have a curve as well, and the calendar views are the same in both.

  I join the toll-free and e-mail RIM for suggestions.

  Once more, bless you and thanks a lot for your help.  I want to acknowledge your efforts with the congratulations, but I'm not sure what to do about the "resolved" part What do you suggest me? I was hoping that I was missing

  something in the settings and that other users had a resolution. The resolution may be trying all possible points of view and find one you can live with! For me "resolved" means that the issue is resolved, so that part is up to you!

  Warmly,.

  Leigh Ann

  Greetings to you!

  Bifocals

  RIM's toll-free: 877-255-2377

  [email protected]

• Cannot open cash book complete due to the run-time error 429.

  Can't open the program because the runtime error 429, how can I solve this problem?

  original title: try opening a program called FULL of CASH book and an error is displayed in Run Time error 429 active x component cannot create object

  Connect with the people who wrote, distributed or support the program FULL of the CASH book.

• BlackBerry Smartphones Outlook 2007 and storm Sync?

  Previously, I had a Dell Pocket PC and used Microsoft's ActiveSync through an abridged version Outlook. I bought a storm through Verizon and tried to sync Outlook with the storm. I kept getting the window... "Run-time error. Value of the option is unacceptable. Please check the properties option. "I went through Setup with Verizon Tech Support. Which included the restart of the storm. They have abandoned and referred me to Blackberry.

  I have since removed the Outlook 2002 including all .pst files hidden that I could find. I installed Microsoft Office 2007 and started again. Same problem, same error!

  I don't think there is a problem with the BB Desktop Manager configuration. Between Verizon and I have, it seems, that attempted to apply the possibilities.

  I would be very grateful for any suggestions. I'm out of ideas.

  Thank you

  Biofocals,

  Thank you for your help. "Do you know your stuff'.)) I did as you suggested and the sync performs perfectly. Again, thank you for your help.

  Johnjobro

• A run-time-error, how to fix

  "I write a function to return a pointer of type float64 and assign the pointer to my defined Pionter 'newdata' in my StartCallBack, there is no error, but when I USE"

  DAQmxWriteAnalogF64 (gtaskhandle0, leng [0])<=leng[1]?2*leng[0]:2*leng[1], 0,="" 10.0,="" daqmx_val_groupbyscannumber,="" newdata,="" &written,="">

  I receive a run-time-error like this: "work.c", line 231, col 121, id thread 0x00007FB4: Array too small argument (40000000 bytes).  Argument must contain at least 80000000 bytes (10000000 items). Why does this happen?

  My part code:

  DAQmxCreateTask ("", & gtaskhandle0 ");
  DAQmxCreateAOVoltageChan (gtaskhandle0, ' Dev1 / ao0:1 ', ' ',-10,0, 10.0, DAQmx_Val_Volts, "");
  DAQmxSetTimingAttribute (gtaskhandle0, DAQmx_SampClk_Rate, 1000/looptime);
  DAQmxCfgSampClkTiming(gtaskhandle0,"",1000/looptime,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,leng[0]+leng[1]);
  DAQmxRegisterDoneEvent(gtaskhandle0,0,DoneCallback,);
  DAQmxWriteAnalogF64 (gtaskhandle0, leng [0])<=leng[1]?2*leng[0]:2*leng[1], 0,="" 10.0,="" daqmx_val_groupbychannel,="" newdata,="" &written,="">
  SetCtrlAttribute (panelHandle, PANEL_REALWRITE, ATTR_CTRL_VAL, (double) written);
  DAQmxStartTask (gtaskhandle0);

  From the code, we cannot see how many samples do you expect to write but there are two aspects to consider.

  DAQmxWriteAnalogF64 expects to receive the number of samples per channel to write; in other words, your "2 *" in the function call is probably wrong. See here for the function. This can cause the error you receive, because the length of the array does not match the settings (you probably want to write 5 million samples per channel).

  Second aspect, it seems to me that your function is the production of the final table with samples interleaved (i.e. array1 [0], array2 [0], array array1 [1], array2 [1]... [n-1] array1, array2 [n-1]). If this is true, you must pass the DAQmx_Val_GroupByScanNumber in the function call.

• Whenever I try to open Outlook Express, I get this message: Run Time Error! Program: C\Program

  original title: cannot open outlook express

  I am running windows XP Professional

  Whenever I try to open outlook express, I get this message

  Run Time Error!  Program: C\Program...

  This application has requested the execution in an unusual way.

  Please contact the support team of applications for mor information

  I can not access my emails at all.

  Search for antivirus interference.  See www.oehelp.com/OETips.aspx#3

  If you can, open OE and click file | Identities and establish a new identity.  Then see if it works.  If you can not open OE to do this, then move all the dbx files to another directory of their current location.  To reset the message store, which you should be able to open OE then.

  Steve

• CAN´t burn on a DVD. Process went up to 98% and then rejected the disc. The message is "run time error: unknown exception."

  Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?

  Rayo

  Thanks for the reply.

  Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.

  Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.

  Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next

  If necessary.

  If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.

  Thank you.

  RTA

• Satellite X 200 - 25 G: problem of Flash Cards - Run time error file TCrdMain.exe

  Hello world!

  I don't know how, but I have a problem when my windows Vista from (running)
  The problem is with these file TCrdMain.exe this file is for Flash cards, end running every time when I put my PC on (with windows startup). But I see this problem: "Run time error file TCrdMain.exe ' and I should click Close.
  I don't know where can I uninstall this program and when I find that driver (Software) (if I uninstall and then install this driver, maybe that everything will be OK). This is the main problem.

  And another question...
  There are so many programs with this computer (laptop), and if I want to install Windows XP for example, where can I find everything (each programs) there may be 10 or 15 pograms.

  It will be a big problem if I change my OS. Y at - there a site where I can download, everything...
  Thanks for the replies, nd sorry about my English :-) skills
  Best wishes from the Bulgaria and have a nice day!

  Post edited by: me

  null

  Hello

  I'm not very well why the executable Run TCrdMain.exe error, but it is certainly up to Toshiba FlashCard software and the FlashCard belongs to the package Toshiba Vista added value m.

  Kody is good. Reinstall the VAP and check if this helps solve this problem.

  With regard to the question of the other;
  You are right; the notebooks are preinstalled with many different applications. But it is necessary because the laptop supports many different features.
  However, if you want to install XP OS on the X 200 PSPB9E series, you will need drivers Toshiba XP and all need Toshiba XP drivers are available on the European driver Toshiba page

  You must install all the drivers available if you want to use all the features of the laptop.

  Concerning

• CVI 2013 ' FATAL RUN - TIME ERROR: pointer to free memory passed to the function of library "when you access a struct of struct

  #include 
  #include 
  #include 
  
  typedef struct StringsStruct
  {
    char A[10];
    char AA[10];
  
    char B[10];
    char BB[10];
  
    char C[10];
    char CC[10];
  } StringsStructType;
  
  StringsStructType Strings = {0};
  
  char *const SelectedStrings[3] =
  {
    Strings.A,
    Strings.B,
    Strings.C
  };
  
  int __stdcall WinMain (HINSTANCE hInstance, HINSTANCE hPrevInstance,
                         LPSTR lpszCmdLine, int nCmdShow)
  {
    if (InitCVIRTE (hInstance, 0, 0) == 0)
      return -1;    /* out of memory */
  
    strcpy( SelectedStrings[1], "TEXT" );
    /*** FATAL RUN-TIME ERROR:   "main.c", line 32, col 11, thread id 0xXXXXXXXX:   Pointer to free memory passed to library function. ***/
  
    Breakpoint();
  
    return 0;
  }
  

  Any chance to get this working in 2013 CVI?

  "& Strings.A [0]" does not work either.

  Hello CVI - User!

  Thank you for reporting the issue. I filed the bug report # 423491.

  I did have a chance to get rid of the error by changing the definition of the structure, but I was able to get the program running by disabling execution checking when the fields in the structure are initialized:

  strcpy( (char*)(uintptr_t)SelectedStrings[1], "TEXT" );
  

  Or perhaps a more descriptive workaround solution:

  #define UNCHECKED(x) ((void*)(uintptr_t)(x))
  strcpy( UNCHECKED(SelectedStrings[1]), "TEXT" );
  

  Thank you

  Peter

• Run-time error '91'; Variable object or with block variable not set "

  Help, please... I had "run-time error '91'; Variable object or with block variable not set "for kawai2004 game.  Please help how to fix this error.  Thank you very much.

  Hello

  See the following article
  http://support.Microsoft.com/default.aspx/KB/822521

• ActiveX error message: "run-time error '429': ActiveX component can't create object" when running FSX 2004

  Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it

  Thanks in advance

  Ianzee

  Hello Diana

  Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.

  Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!

  Thank you very much for your help & trouble in front of me, it is appreciated.

  Cordially Ianzee

• What is this dialog box? "Run-time error '380': invalid property value."

  I'm trying to load a registration program and I get a dialog box that indicates that following.

  "Run-time error '380': invalid property value."

  What it means. How can I solve this problem?

  Pescatore

  Hi arthur rossi.

  See the FAQ of the Roemer software that has exactly the problem mentioned.

  Refer to the Question I get an error message that says: one of the following values: "Runtime error 380 invalid property value", "Runtime Error 52" or "Invalid file name" in the following article. "

  Roemer Software FAQ (frequently asked Questions)