BlackBerry Smartphones Starting Error: my BB shows a white screen with 3 lines of text. Help me please.

Similar Questions

• I'm download of Adobe Acrobat Reader, and when I start the download is just a white screen with no content. Why?

  I'm download of Adobe Acrobat Reader, and when I start the download is just a white screen with no content. Why?

  Hi Patrick,

  A blank window appears generally if the Akamai detects that your computer does not meet the minimum system requirements to run the DLM.

  In most cases the JRE or ActiveX controls are not enabled.

  Try to switch to another browser to access your download, or you can download it from: http://get.adobe.com/reader/enterprise/

  Kind regards

  Rave

• My Blackberry 9000 blackBerry smartphones starts after the file transfer has failed

  Hello

  I started to transfer a video clip using the Desktopmanager program, during the file transfer the when t PC standby and after that, the terminal is dΘmarre.

  After removing the battery, it shows a white screen with a small clock and it is black; After removing the battery for 5 hours theink happening only is the redlamp is on during 2 to 5 seconds, then nothing.

  I hope someone has a tip on how to solve this problem.

  Thank you

  Digger

  Hello

  I was unable to get any contact with my BB 9000 so I had to turn service.

  Best regards

  Digger

• Update of Microsoft showing the white screen

  I have a problem with windows update, it shows a white screen with #ElementModuleHeaderText #.
  #ActionCustomInstallImportant #.
  #ActionCustomIntstallOptional #.

  and that's it nothing else, the page is empty, don't cancel anything. You have any ideas what it could be and how to fix it?  Thanks for the help.

  I have not downloaded anything in recent weeks, and I can say no updates have been installed for a few weeks.

  Hi Whizzie,

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  Step 1: reset Windows Update components .

  To reset the Windows Update components, you can follow the link provided below.

  http://support.Microsoft.com/default.aspx/KB/971058

  If the solution provided above does not resolve the problem, you can follow step 2 to perform a clean boot.

  Step 2: clean clean boot .

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  If the problem is resolved to check what is the cause of the problem, referring to the link given below:

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on Continue.On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• BlackBerry smartphone JVM error 513

  Need some help here guys

  iMac: G5

  OS 10.6 Snow Lepard

  BB: 8310 (use = 1 year)

  Carrier: AT & T (locked)

  History: No problem forever

  Current history - problem:

  Downloaded the new BB Desktop operating system tonight (BlackBerry Desktop Manager 1.0.1 build 2 for Mac OS 10.5 +). Restart USB connected to BB - updated started and progresses until about 50% full-

  Error message "unable to connect to your motto B.B. de B.B.D.M.. "Reconnect your currency and try again" - did this - same error message - USB disconnected from the computer - BB goes white screen with ' JVM error - 513 / Reset "- Hit reset - same screen - try again - even rule out - Take battery, wait 1 min/card battery replace battery replacement - same screen - same screen - Take SIM and MeM -

  Now have a Clipboard where I usta "have a life - where is Blackberry support on this one - need it as soon as POSSIBLE!

  Hey, sorry for your pain... anyway... you did a return upwards before you try to install any new software?  I hope so.  Go here to unbrick your phone:

  http://forums.CrackBerry.com/F62/how-UN-brick-BlackBerry-Mac-336488/

  Take your time and be patient.  Also, make sure you have deleted all your mac synchronization software before installing DM... If you uninstall then all this trash, empty the trash, restart and repair permissions, then reinstall DM.

• BlackBerry smartphone App Error 205...

  After an upgrade, the storm has a white screen with App Error 205.  The word "Reset" is highlighted, if pushed the unit restarted with the Blackberry logo with a progress downstairs bar.  When the progress bar completes the unit returns to the 205 App error screen.

  Blackberry Desktop Manager suggested to level and in step 10 of 11 a fatal error appeared in the Desktop Manager saying an error has occurred and the installation process was not complete, but it did not indicate the resolutions.  The device does not connect to the Fund Manager.

  Assume that the device is beyond the warm reboot phase, so is I possible to do a hard reset or restore the operating system to its original settings?

  Thanks in advance.

  Same thing happened to me.  My phone worked for a while after that the upgrade and then I got the same white screen.  I could clean and reload the OS 5 by using the application loader in Desktop Manager even if it does not recognize the phone when it is connected to the start.  I went to clean and reload everything.  I had not backed up third-party applications and was supposed to meet again as well as reset recharge my contacts and calendar.  The good thing is now it works fine.  Better that we I had initially updated.

• BlackBerry smartphone App Error 523 for reload software 507 on 8350i

  OK, I was looking for the forums and try the suggestions and I didn't chance... what I did my problem is compounded.

  One of my drivers brought me a phone this morning that says "App error 523" it is unclear what he does for her, I have recognized this fact and knew what he had to do... JL_Cmder wipe and reload the software. When I went for it, it doesn't look good... it doesn't seem like he was wiping, I thought that maybe it couldn't connect because it was stuck on the screen of 523 error and that maybe if I reset the phone it would connect until the error came back to the top, so I reset it. Apparently that's what I did wrong, because then my Office Manager and JL_Cmder both couldn't read and I think that this is the error Reload Software 507 came. So now, I have a phone that program may seem to do anything with nor can they connect to him. I don't have administrator privledges on my computer and my office mgr also decided at that time that he would tell me he could not upload/upgrade at software level until the 6.0 upgrade has been done, so I had to wait my next computer work and disconnect me, so he could log on my computer and get better. I was hoping that the upgrade to the blackberry desktop mgr would help, but it didn't. It does not recognize the device connected to my computer, Yes, I am using a USB port on the front, the same USB port I used on all my phones for several years now. I tried to paste this into the command run thingy (I don't know what it's called I'm really not all that sophisticated computer sorry) "c:\program files\common search motion\apploader\loader.exe" /nojvm and it recognize not a device either so it happened not the case. I tried a bunch of links to all these pages that you have, but nothing works. I saw something on the execution of an order on JL_Cmder but I can't figure out how, I clicked on #6 use order online because I thought that was that, but it came with a Notepad and I don't know what to do with it. Can someone help me please?

  It's a Nextel 8350i, I'm not sure of the version or platform software he had... seems to have none right now. No BES.

  OK, so it turned out to be the fault of fund managers... as soon as I uninstalled and reinstalled, I plugged the phone on him and he immediately offered to give me the software, I just reinstalled the operating system without a hitch. All phones are now detected and connected when plugged into my computer once again, although I spent a whole day of work aggravated that at least now I know for future reference when the Office Manager has another update. I want to thank you for the BBSAK, that was the 1st time I heard about him, and it seems quite useful. I hope my post helps out someone else worse. Happy Berrying.

• BlackBerry smartphone App error 602 and 603

  Hi all

  Has anyone met a white screen with App error app error 603 602 on it?

  Since ive been do this error messages my phone isn't working properly. Not knowing what to do. Need help.

  Hello.  I encountered this problem within 2 weeks of having the phone. You took out the battery without turning off the phone? APP 603 error means that you need to reinstall the software on your computer. All data stored on the device will be lost, but it will be like new.

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  When sharing my project there are some clips that show a red screen with a camera saying error. How can I solve these clips if I can share the project correctly?

  This happens usually when the import process was not completed. If you have the original camera card - or a copy of the computer of the map - you can probably use the re-import command (on the file menu) to fix things. In addition, it is possible that the original media is imported, but this transcoding was not. If you have chosen to optimise upon import, try to select clips in the browser and transcoding to optimized.

  Russ

• Start window manager: sometimes when I started my PC I have a black screen with the Windows boot manager at the top.

  Sometimes when I start my PC I have a black screen with the Windows boot manager at the top.  Although there are several options available, that nothing happens no matter what keys I hit and the only option is to shut down the computer and restart completely.  Sometimes the Boot Manager page turns and my office sometimes opens fine.  I've updated with everything Microsoft has Windows Vista and I still get this screen.  Anyone has any ideas.

  Do a startup repair and see if that fixes it:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• CHKDSK replaced the security id not valid with default security id & showed a black screen with the mouse cursor

  Hi you

  After running CHKDSK, it said replacement of the security id invalid with the default security id in windows 7 64 bit

  After that it's over, he just showed a black screen with the mobile mouse cursor!

  I searched but did not find the answers on Microsoft

  Please help me

  Hello

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  Check the drive run at Windows startup?

  Thank you for details on the issue.

  This message is displayed because the specified file has an invalid security ID. Each file on a NTFS or FAT volume has security what ID assigned. The ID assigned to the data file does not match the ID assigned to the security data stream file ($SDS). There is a mismatch of Ids. CHKDSK replaced the invalid security ID.

  Black screen with cursor may appear due to corrupted display driver.

  I suggest you try using the steps described in this article and check.
  Reference:
  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Important notes:
  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Photo Gallery of window 'import' options shows a white screen

  De : Rogier

  Message: I am running Windows Vista Home Premium and have a problem with the photo gallery. I can no longer change the import options. File-> Options-> Import, shows a white screen. This happens only to one of my user accounts, either one works great! I guess that's a result of PCTools Desktop Maestro of the recent registry cleaning. Someone knows how to solve this problem.

  From: oscar

  If you used a registry cleaner, and if you have problems with some files of the operating system, then the fastest solution to this problem would be to open a new standard user account, transfer your files and records of personnel to this new account data, and then close the standard user account that has the corrupted OS files.

  Oscar :)

  ... Make a right click is your very good friend...

  Another response of the community of Windows Vista discussion groups

• I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

  Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

  Maybe this old conversation will help you:
   http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

• Windows 8 - icons of the CS6 Office showing as white icons with the green arrow

  After I loaded standard CS6 64-bit on my DELL XPS 8, the Office file windows icons appear as an icon of white box with a green arrow instead of icons Adobe. All other icons appear correctly. I have Illustrator CS5 on my hard drive and before I loaded CS6 CS5 icons displayed correctly. Thank you in advance for helping me with this problem.

  Hi Adam,.

  I figured this out. I opened the default programs - Illustrator was missing a file type to associate with the program (why it showed the white icon with green bar). I assigned to the Illustrator file with the program Illustrator type. Turn it back on. Solved the problem... Yes!