BlackBerry Smartphones USB storage device

A USB storage can be used on Priv?  USB storage works on my passport, but when it is plugged into my private device does not recognize it at all.  Thank you!

kcheung wrote:

A USB storage can be used on Priv?  USB storage works on my passport, but when it is plugged into my private device does not recognize it at all.  Thank you!

yo mean USB storage?  Ask yourself if the Priv supports USB OTG?

Yes it does, but compared to the Passport, I think you need to install an application to app/filemanager OTG since the playstore first.

Tags: BlackBerry for Android

Similar Questions

  • BlackBerry Smartphones mass storage device: what!

    Hello

    When I plug my BB on the USB port to load I get a pop-up on the BB asking me if I want to turn on mass storage mode.  What do this exactly?  I always select "no".

    I have a 8 GB card in it, if that helps.

    Thank you!

    It's just a matter if you want to be able to see the memory card on the computer (so you can add or remove files it contains).

    You can find more information about it here:

    http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB11879

  • BlackBerry Smartphones Mass Storage device not recognized...

    I am running Windows XP (Media Center Edition) and at the time where I was using a 8320, I didn't have this problem... but now that I have a 8330, my computer does not recognize the MicroSD card, I got plugged into my phone. It's literally the same card that was in the 8320, and otherwise everything else works perfectly.

    It is listed as an unknown in my Device Manager device, specifically as a "RIM Composite Device".

    * I already uninstalled the drivers of BB on my computer and reinstalled them.

    * I already uninstalled DM and reinstalled - not that I thought he would do anything, but it was worth it.

    * I went to the Microsoft support site and tried to use the drivers they have there.

    * I tried to disable the driver in my device manager and tried to force XP to recognize the device. No dice.

    UH... that's all! Any suggestions?

    Just an update to this issue.
     
    It is not really a solution, but I am sick of XP Media Center Edition, so I did a complete reformat of my laptop and installed XP Pro (as the words of God!) Long story short, my computer is recognizing the card support very well now. I can only assume there was some parameter of the register or glitch in my MCE that prevented the drivers to work as they should.
     
    Anyway, solved! Thanks for the help!

  • HP Compaq 8100 Elite: Boot interrupted by the USB storage device

    If I have any sort of plugged when starting USB storage device, I just get a blank screen with a blinking cursor.

    I disabled each device start-up apart from the internal SATA hard drive and it still happens.

    Finally I found a BIOS update.

    On the HP consumer Support Site? NO.

    On an alley, ad - ridden, dirty pilots-for-all site.

    Anyway. It worked

  • Impossible to disconnect itself from USB storage devices

    Original title: USB storage devices

    Once more I couldn't properly disconnect a USB storage device because Windows tells me that a program is still using the device. There is no reason for any program to access it then why on earth isn't Windows the task/program name so that I can address the issue instead of having to restart my computer? Of the many irritants "characteristic" of Windows, it is one of the most galling.

    Hello

    ·        What is present in the USB key?

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    I suggest you follow the steps mentioned in the article below and check if the problem is resolved.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

    If there is nothing important in the USB device, I suggest you to format the device and see if the problem still occurs.

    Note: If there is no important data in the USB then, back up data, and then format the USB.

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

    From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

    In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

    Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

    I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

    And if it's an error of some sort, how to fix this problem?

    Please notify. Thank you.

    This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

    I hope this helps.  Good luck.

  • Deletion of data (step by step) USB storage device

    I need to know how correctly, step by step, remove a usb port connected data storage device. I am currently using, Windows visit Home Premium. Thank you...

    By the clock in the bottom right notification area, you will find an icon. Hovering over it said something like 'remove hardware safely '.

    Double click on this button.

    Find the usb storage device in the hardware list.
    Select this device.
    Click on stop / remove safely

    Wait until you receive a notification that can be removed.
    Remove the USB port.
    If so, you can now safely unplug unit from wall outlet as well.

    I hope this helps.

  • Windows 7 is no longer reads the USB storage devices

    I have a problem similar to some other posts, but different enough so that I write it here.

    When I insert a USB storage device (like a Microcenter * Go Flash) Windows 7 Ultimate just shows a yellow exclamation mark next to the device in Device Manager. OtherDevices, USB Flash drive. Software update driver fails, no update.  Uninstalling and reinstalling has no effect.

    Under properties:

    Type of device: USB FLash Drive

    Maufacturer: unknown

    Location: Port_ #0003.Hub_ #0008

    Pilot wrote:

    Privder: unknown

    DAT: Not available

    Version: Not available

    digital GIS: dig signed ot

    Under Details:

    Hardware ID: USB\VID_1307 & PID_0163 & REV_0100

    USB\VID_1307 & PID_0163

    There is no ping, no popup. Nothing. All this used to work very well, and now, when I need to copy files to work urgrnetly, he's dead.

    Just rub a little salt, I CAN access the device through Linux in VMWare Workstation. But when vmware is not current execution, or when I disconnect and try to attach to host, nothing happens.

    I tried each storage device USB I can find and no luck on any of them.

    Thank you

    TMB

    After digging through the forums, I tried to copy the usbstor.inf and .pnf to the Windows\inf directory and reinstalled the driver through the Device Manager, and it loaded right up.

    I don't know, but I suspect that the impact of this change, there are other devices that can complain. For now, the process of transfer between W7 and VMWARE/linux seems flawless.

    TMB - back

  • Driver for usb storage device

    Hi, I have a packard bell No. PEW96 pc and I use a windows 7 Home premium. The problem is that the pc is not a driver for the usb storage device. How I can install it and how I can find it? and the name is? I hope you reply and help me to resolv this.thank you

    Moved from feedback

    Original title: usb storage driver

    Look in their Download Center.

    http://www.PackardBell.co.UK/PB/en/GB/content/download

    Good luck.

  • I have attached USB storage device, but its showing is not in my computer

    I have attached USB storage device, but its showing not in my computer coution marks appear on the icon of the device and wpd files hv prblem please tell me the soloution

    Try to reinstall the usb drivers and the chipset of your PC manufacturers support site

  • BlackBerry Smartphones mass storage mode does not, help!

    so I have my micro SD card in my bb, I have the mass storage mode on, the card holder, compression enabled and auto enable mass storage mode when connected so that a prompt. I downloaded blackberry Desktop Manager to put videos and music on it and like, but when I select the music category in the bb desktop it says I need to activate via the connected device mass storage mode. I activated, I formatted it, I fixed it, all combinations of the four choices on the options of memory on my phone. I also chose enable usb peripheral storage mass on my phone when its plugged in, but it says that my card device and media are already in use.

    I also put media card in my MMC/SD slot on my computer and nothing comes up as a storage device or anything. No removable disk found for him. the light comes on, as she recorded the card but it's not come as what it is on my computer.

    help would be appreciated,

    Josh.

    Hey cloud9n,

    Welcome to the community of BlackBerry Support Forums.

    What BlackBerry do you currently use?

    Also have you tried going through all the steps described in this article? www.blackberry.com/btsc/KB19717

    What version of Windows you are currently using as well?

    I look forward to your reply.

  • IX2 - usb storage device?

    I have a storcenter ix2 and wonder if it can be used as USB storage connected in local device or is it strictly a SIN?

    Thank you

    DTK,

    The ix2 is strictly a NAS.

    However, these things can be circumvented these days.

    If you are inclined to do, you can buy a USB adapter to Ethernet and / access handle the actions in this way.
    https://www.Google.com/webhp?SourceID=chrome-instant&ion=1&ESPV=2&IE=UTF-8#q=USB+to+Ethernet+adapter

  • Notification of 'removed USB storage device' persistent.

    Hello

    My motorcycle G shows after persistent notification.

    'USB storage deleted '.

    Removed USB storage. Insert new media. "

    This notification is displayed after removing the Flash drive by removing it from settings-> storage and pulling the OTG with the drive cable. The notification seems to be stubborn and it can not be erased it unless the device is reset. It isn't harmful, but because of my OCD (mandatory disorder that) for the verification of notifications is causing irritation.

    I notice that only KitKat 4.4.2 and not JellyBean 4.3.

    Any ideas to clear the notification? or is this a bug?

    Thank you

    Ngom

    Update:

    I uploaded a screenshot and added a correction in question (the correction is in bold).

    Hey all,.

    This bug has been reported and a fix is under way.

    See you soon,.

    Nicole

  • My usb storage device is the aircraft but does'nt open up.to see whats on it, that is a 350 GB id acknowledging the help...

    storage device

    brand elements

    350GB

    Hello

    • What version of Windows are you using?
    • What were the changes made before the problem occurred?
    • What happens when you try to open it?

    You receive an error message?

    You can check out methods:

    Method 1:

    I suggest you try to connect the device to the computer and check.

    Method 2:

    You can also try to connect the device with the other port and check.

    Method 3:

    Tips for solving problems of USB devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    Note: This link implies also on Windows 7.

  • Windows XP Pro not be assigned a number of hard disk to an external USB storage device

    I can see the SanDisk USB mass storage device manager devices under the USB connection or hard drives. But cannot see it in disk management.

    The site better troubleshooting for problems of USB that I found is this:
       <>http://www.Uwe-Sieber.de/usbtrouble_e.html >
    At the very beginning of the page is the problem "No Drive Letter".  Try to go through the suggestions.

    HTH,
    JW

Maybe you are looking for