BlackBerry Smartphones using missing synch for Blackberry Storm - does not contact sync etc.

Similar Questions

• ERROR: ' we found your application uses iOS identifier for advertising but does not include the functional ad.

  I just create my new Single Edition App, but Apple rejected my application because:

  "We found your application uses iOS identifier for advertising but does not include.

  feature ad. This is not consistent with the terms of iOS Developer

  "License program, as required by the App Store Review Guidelines."

  https://iTunesConnect.Apple.com/WebObjects/iTunesConnect.woa/Wo/10.0.0.7.3.0.9.3.3.1.0.13. 3.1.1.11.3.1.0.6.1.1

  What does that mean? What should I do? I already created another unique edition correctly...

  Rebuild your simple editing application and then try again to Apple. We have released a fix for this Friday.

  Neil

• Application created using the BB for Eclipse plugin does not run in the Simulator

  Hi all!

  I created an application using BB plugin for Eclipse.  I try to run in the Simulator, but it never gets displayed (the application icon is never shown).  However, I create a "Hello World" sample, which works perfectly in the Simulator.  My application in Eclipse has never shows all files .cod or .jad, there only have files .jdp and .rapc

  My doesn´t app have encoding problems or errors of any kind (at least not displayed in the view of error).

  TIP: I have copy - paste code in different applications, is that a problem?

  I tried:

  • Restart Eclipse,
  • Configuration of active building of blackberry,
  • Cleaning of the project,
  • Creation of the project,
  • Reinstall Eclipse,

  but none of this seems to work.

  Can someone help me please?

  Best regards

  Juan.

  Hi all!

  In the event that a person gets the same problem, I mentioned.  I found the solution: it turns out that I had a very high class with a lot of code on it and that s the reason why the application does not get launched into the Simulator.  What I did that I shared this class on the 4different classes each managing different parts of the code and now it works perfectly.

  Hope someone is enjoying this, cause I spent a lot of time trying to figure out what the problem was.

  Best regards

  Juan.

• ERROR. We found that your application uses iOS identifier for advertising but does not include the ad feature.

  Hello

  We have introduced an application using DPS Enterprise and had this error. I saw on the forum that it came early this year and a fix has been released, so no reason for this again? We use the latest versions.

  Graham

  Apple sometimes incorrectly reports apps with this error on review. There is no identifier advertising in use at the DPS. The dismissal of the appeal and tell them the app includes iOS identifier for advertising and ask them to check again.

  Neil

• error 'BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects."

  Hello

  I installed Adobe Flash Builder Burrito and Blackberry Tablet OS SDK 0.9.4 on Windows 7. When I start to create a new project by selecting the ' New/ActionScript Mobile Project' menu, then in the new dialog box project of Mobile of ActionScript, I give a project name, and then choose 'BlackBerry Tablet OS SDK 0.9.4 for Adobe Air. At this point, the 'Next' button is gray on an error message on top as "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR does not support mobile projects.". Is there something that I am missing?

  I read somewhere someone comlains error message "BlackBerry Tablet OS SDK 0.9.4 for Adobe AIR support not projects mobile." occurs after installing Blackberry Tablet OS SDK 0.9.4 while there is no problem with Blackberry Tablet OS SDK 0.9.3. If it is true, where can I download Blackberry Tablet OS SDK 0.9.3?

  Thank you very much in advance,

  John

  @johnwneg, make sure that when installing FB Burrito, you:

  (1) run the installer as administrator.

  (2) select English International rather than NA English.

• BlackBerry Smartphones BlackBerry World does not not on Z10

  Is it just me or BlackBerry World does not work on the Z10?  It seems to stop working a day or two ago?  Anyone know what is happening or how to fix?

  Ti GO your music folder and click 3 points, then the blackberry world. I had the same problem and it worked for me,

• BlackBerry Smartphones BlackBerry Desktop does not recognize my Bb

  I just did some kind of update to my BlackBerry Desktop and 9790 and now BlackBerry Desktop does not recognize my Bb .  I deleted and reinstalled the office and still have the same problem.  Is there a way to do a factory reset on my Bb? I think that to nine will be the best course of action.

  You can wipe your BB completely, but make sure you have a saved backup file!
  go to options, security, then wipe device (you must type in the word blackberry!

• I bought Adobe Acrobat DC. We use it in a desktop environment. Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?

  Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?

  I tried to contact technical support to the 800-833-6687 but was put through several automatic guests and disconnected.

  Hi plumasca,

  Refer to this topic for help disable features/services online in Acrobat/Reader DC?

  Kind regards
  Nicos

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• When I opened TB, under 'Accounts', it only shows the option "create a new account. Option: "view settings for this account" does NOT appear.

  When I opened TB, I don't see no information on the TB account that I used for years. Instead, the main menu shows only 'accounts'-'Create a new account - Email, Chat, newsgroup, feed'. Option: "view settings for this account" does NOT appear.

  Also the main menu does NOT appear "Email - messages, write a new Message" or "Advanced functions", etc...

  Real emails regarding the TB account I used for years are still present in the "users-> xxxxyyyy-> AppData-> Roaming-> Thunderbird' folder."

  http://KB.mozillazine.org/Recovering_a_profile_that_suddenly_disappeared

• Logo of security for financial sites does not appear

  Logo of security for financial sites does not appear since the upgrade from 3.6 to 6.

  In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.
  
  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.

  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/
  • https://support.Mozilla.com/kb/site+identity+button
  • http://www.Mozilla.com/en-us/Firefox/security/identity/

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Service Pack 3 for Windows XP does not recognize that it is connected to the USB ports. I get a notice that something has been plugged, but Windows fails to recognize regardless of the question.

  Disconnect all USB storage.

  Run this tool by do right click and choose 'run as administrator '.

  Of course, all first extract it:

  http://www.Uwe-Sieber.de/files/drivecleanup.zip

  If your XP is 32 bits, use the Win32 folder.

  Reset.

  If you still can't find the drive, assign it a drive letter in disk management.

• Windows Fax and Scan for Windows Vista does not appear under all programs

  Windows Fax and Scan for Windows Vista does not appear on my computer under all programs - where he might or he is still in charge?

  If you have Vista Home Basic and Vista Home Premium, they do not come with Fax software included.

  You will need software 3rd party Fax:

  http://www.SnapFiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• FVD video Downloader for Google Chrome does not.

  Google Chrome FVD Video Downloader does not work. When I click on the button

  an empty bubble appears saying nothing. someone tell me full gas should be there.
  Good bye. FVD video Downloader for Google Chrome does not. Good bye.

  Hello

  1 did you do changes on the computer before the show?

  2. what browser do you use?

  I suggest you to reinstall the software and see if the problem is resolved.

  Step 1: Uninstall extensions

  See the site:

  Uninstall the extensions

  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=113907

   

  Step 2: Install the extensions

  See the site:

  How to install extensions

  http://support.Google.com/chrome_webstore/bin/answer.py?hl=en&answer=167997

   

   

  If the problem persists, then I suggest you to visit:

  http://productforums.Google.com/Forum/#! Forum/chrome

• the installation program could not use the existing partition because it does not contain the required free space

  before I have install android 5.0 lollipop on mylaptop but I can't use wifi to connect then I use return windows 8.1 and I decided to install windows 8 because I have experience an error I couldn't manage on windows 8.1 .when I try to install windows 8 it shows me this error Setup could not use the existing partition because it does not contain the required free space... I google search for the solution but could not find so I install the windows partition 8 on my system reserved.

  Hi Lawren,

  Thank you for your update on the issue.

  In this case, you may need to format the entire disk, clean the partitions and reinstall new windows as suggested before. However, I suggest you to contact local support for the backup of your data from hard disk partitions.

  Please post back your results for assistance.