BlackBerry Smartphones Vib-Ring-beep

How you define the BB for ringtones for calls, vibrate on emails and beeps on sms. Thank you

You must go to profiles then advanced, and then you can choose what action you want for each message or phone call.

PBKolsun

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones Vibe AND ring NOT Vibe PLUS ring

    Would love my new "BOLD" 9000 to viberate and ring at the same time, viberate firstly, stop, then second ringtone.

    What's not an option?  Is it possible to make an option?

    There are three utilities that I know who will do it for you:

    BerryBuzz

    Ringer and vibrator

    VibAndRing

  • BlackBerry Smartphones Loud ring tone

    I migrated to a Moto Q to a Blackberry 8330.  The Q had a "Trill" ringtone that was strong enough so that I can hear.  Can anyone recommend an unpleasant ringing, or no one knows where the ringing of the trill, who hails from the Q?

    Hi and welcome to the forums!

    Well, you can choose music you hate and make a ring tone

    On your BB you configure to use the FORT profile and put all your tones for the great?

    If so and you do not always hear them, I would go on the site of the carrier that had the obnoxiouz of trills and see if

    they sell it as a ringtone. Is must be in the proper format. In fact, here a list of the formats supported for the BB.

    http://www.BlackBerry.com/BTSC/dynamickc.do?externalId=KB05419&sliceId=SAL_Public&command=show&forwa...

    Please let me know if you need more info.

    If this isn't the case, please take a minute to reasolve the post continues the check mark of resolution in the post that answered your question.

    Thank you!

  • BlackBerry Smartphones sms ring for each person

    is it possible to change the ring of your sms or whatever you want to call for each person cause im becomes sick of hearing the same one over and over again for all the world

    Hello and welcome to the Forums of Support BlackBerry.com.

    Yes, it's not really easy to SMS notifications, but possible.

    Read this:

    http://www.BlackBerryFAQ.com/index.php/How_can_I_personalize_my_alerts_from_specific_contacts%3F

  • BlackBerry Smartphones Low ring volumn

    Recently given a blackberry 9000 and fell for T-Mobile. Noise is loud, but I can't always hear the ring when in the Holster.  Sound can be reactivated?  What is a characteristic of 9000?

    Ringtones are everywhere.  Hat over the www.crackberry.com is a way to go.  Also, you should be able to get ringtones from your provider.  I have never installed it on my phone so I'm not an expert in the field.

    With respect to the frequency of the rings, the fact that you are now running on another network shouldn't matter.  Carriers dictate how long a ring will go before going to voicemail, but except that they are all pretty much standard.

    EDIT: Well, I just visited www.crackberry.com and downloaded the Hockey Night in Canada theme (free).  It was pretty easy to do, it doesn't cost me anything, it sounds good... I guess I'm an expert on the subject now!

  • BlackBerry Smartphones Viber on 7.1 OS

    GUY!

    Help?

    Is it me who can not download viber on my bold 9900 since update to 7.1?

    Or is it really not available on this OS?

    Thanks guys, but every time I am gone in appworld he would say that its not available for my device. I had to download appworld externally, outside. Works like a charm

  • BlackBerry Smartphones PRIV begins beeper PIN screen on reboot

    I have a 4-PIN number on my PRIV. Sometimes in the night the PRIV will restart (probably install updates, I guess) and after reboot, it will ask for the PIN before it starts up Android (which is normal). My question is after 2 minutes of PIN code screen, PRIV start beep, probably let me know that I need to enter my PIN code before that Android will start and I can receive messages, phone calls, etc. Is there a way to disable this beep? I could doing at 2:30 in the morning!

    Just to add more detail, once the PIN screen appears, it beeps after 2 minutes if there is no entry. It emits a "tick" sound every 5 seconds approximately. Once you pick up the phone and press any button, it stops.

    Thanks, your idea works! It is possible to disable the PIN before starting Android while still requiring a PIN before you can access the phone. Here's how to change the setting:

    -Settings

    -Security

    -PIN screen lock

    -(enter your PIN code)

    -PINE

    -Don't select 'Thank you' instead of 'Require PIN start the device'

    -Press to continue

    -Enter your PIN and press next

    -Enter your PIN again to confirm your PIN screen and press OK

    You're golden!

    So to confirm, it will not be asked to enter a PIN to start android, but you still need to enter your PIN to access your phone as usual. And you won't be awake more by phone reboots early in the morning!

  • BlackBerry Smartphones phone rings only 2 times

    I have asked before about it and told me how to fix it. Well for some reason, that the phone is returned to ring only 2 times again and it is does not me enough time to respond! Someone knows how to fix this? Have the phone set to vibrate and ring to take a part of the alarm time or something? I do not know. Just try to understand it.

    I had to ring 3 times by disabling the tone + vibrate off and just keep it on your. But I'll call t-mobile and see if there is anything else they could do.

  • BlackBerry Smartphones phone rings twice, then voice mail active. Help, please...

    Hello

    I have a problem where my 9500 Storm during the reception of incoming calls, ringing twice and then clicks right in the mailbox. I checked my cell voicemail box configuration providers and everything seems correct (I'm with Vodafone España). I placed my SIM card in an old Nokia and resonates about 4 or 5 times until the voicemail comes into play. My conclusion is that it is a phone number. Is this good?

    Is this a bug or do I have to change something in the settings of the phone?

    The phone is set with old style phone by default.

    I'm under the new firmware.78.

    Clues?

    Thank you very much

    Hello

    Thanks for your advice. You are absolutely right. My mailbox has been set to activate after 15 seconds the ringer. I rang my Storm from my landline and two rings passed before the phone responded. On the third ring vibrée the storm. On the 4th ring, you could hear the ringtone. The fifth, a break in the ring. And then the sixth ring again. Date on which 15 seconds had elapsed and the voicemail kicks in giving the impression that the storm had rung only twice.

    Now, I asked my carrier to extend it to 30 secs and all right.

    Thanks again.

  • BlackBerry Smartphones incoming ring tone is too short

    the incoming ring type is too short, this causes problems because it does give me enough time to answer a call before diverting to answering machine, it sounds in fact only once after him vibrating

    You can change your profile to set virbrate once if you wish, then it will make the sound ring a little longer.

    You can call your operator and ask a ringtime liked to your voicemail. By default, the carrier assigned to 15 seconds, you can take up to 30 seconds.

  • BlackBerry Smartphones phone rings but I cannot hear caller on the other end

    I only had my phone for a few days and something went terribly wrong!  The phone seems to work fine until I downloaded the BlackBerry Handheld Software v4.5.0.152 (Multilingual) of late update last night. This morning I noticed by examining ringtones already on the phone that I couldn't play, but I thought I was doing something wrong because I could hear when I started using the phone.

    Immediately after the software was updated, I had to change the settings of the radio so that I could access internet again (I think of radio settings). Is there a setting on the phone that I need to update, or something else I can do to fix this?

    Thank you very much in advance!

    So to be clear, it happens, that keep you the battery, things work fine for awhile, then it happens again, and you need new pop the battery?

    Is the release of the OS device you have installed certified by your carrier? Or is this a leaked version? You can check the version of your operator here:

    You could also try the device OS - something maybe went a little bit last night installing.

    • KB11320 How to perform a clean reload of the BlackBerry Device Software using the Application Loader tool

    Otherwise, if it persists, you should contact your carrier (if it was a sanctioned release by the bone) and let them know.

  • BlackBerry smartphones # of rings!

    As silly as it sounds... I can't for the life of figure me out how tro set the number of rings

    until it goes to voicemail?

    (A) the method the simplest is to call your operator and requires longer time to ring, up to 30 seconds. The carriers regularly set to 15 seconds.

    (B) If you have a GSM based phone, some have had success by calling that number from your phone: * 61 * XXXXXXXXXXX * 30 #.

    • Replace XXXXXXXXXXX with your message center number voice carrier (find him looking at your phone dialer > Options > VoiceMail > access number.) Put your access instead of the Xs above number.

    For example, the T-Mobile voice mail access number is 18056377243, and would therefore be the string to dial * 61 * 18056377243 * 30 #.

    • Replace the 30, the end of the string with your desired seconds. For most carriers, 30 seconds, it is the longest allowed.
  • BB user new blackBerry Smartphones is a * beep *!

    I am a * beep * or what?  Could someone help me please with these 2 queries?

    I recently got the BB Curve 8520 and I am doing 2 things:

    (1) how the hell can I activate my Messenger?  When I try to load someone PIN, it does not allow letters and numbers.

    (2) how to turn off my email.  I tried the option "phone only", but I always get emails.

    Kind regards

    Sean

    When you're in the PIN code input window screen, are you some but allows numbers, or does allow numbers and some LETTERS as a, b, c, d, e, f...?

    When this windown, press the ALT key, you can enter letters?

  • BlackBerry Smartphones No. rings or vibrates on 8530

    Since yesterday I can listen to no longer have any kind of sounds, whether alerts, ringtones, Pandora, etc.. And my phone vibrates any more, either.  My sound setting is Normal, and I have all the settings 'ON '. I have not updated the operating system for about 2 weeks, so I don't think it was a problem. However, it seems that this started right after scanning a bar code on a site for a film. I went to the site to watch the trailer and there was a bar code, saying to scan for more movie content. He started to play a video, and a few seconds inside my locked phone. I had to turn off because none of the keys worked. I have it turned on, but did not really notice that there is no sound. I had to put the phone in silent mode, because I had to go to work. It was after this that I have not noticed any noise.

    I'm on my way to the nearest Sprint Store to see if they can fix it. All the suggestions of the members of the forum would be appreciated.

    Thank you.

    Hi Baanthos,

    What happens if you remove and reinsert the battery? The same problem occur?

    If so you can take a look at the following article also (if applies to a version of software different, but sounds like a similar problem):

    http://www.BlackBerry.com/BTSC/KB24307

    See you soon,.

  • BlackBerry Smartphones Black Berry Bold 9900 only able to ring if number in phone contact list

    Black Berry Bold 9900 only able to ring if number in phone contact list

    can someone help me solve the problem above his on optus and has just the stock of claims on this subject.

    Would appreciate any assistance.

    Perfect phone in all other respects.

    Hello and welcome to the community!

    I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, see what happens.

    If the behavior continues, then well... think what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    But if the behavior continues mode without failure, you may need to consider more drastic measures - WIPE, OS Reload, BBSAK Wipe/Reload and the process of reloading OS 'skeleton '. To prepare, you should be sure that you have a full backup of your PC... Please see the Backup link in my sig auto on this post for instructions.

    You may also use these tips:

    Good luck and let us know!

Maybe you are looking for