BlackBerry Z10 Default earpiece/Headset Bluetooth / output Audio Plug

During the drive, I have a kit hands free bluetooth (speaker jabra) and I have the audio output taken mini plugged into my car for audio (stereo / music).

During audio playback to my car, it uses the audio Jack very well, the problem is when I receive a call, I want to use the bluetooth headset device instead.

Now when I receive a call, the audio of the call is routed to the mini taken and I have to manually select the helmet after answering the call which is a pain in the...

Is there a way to set the default device for different outputs.

for example

Use the mini as the audio device output by default when the music plays.

When I get a call, use the headset as default device bluetooth for phone calls.

When I hang up, swinging back to the mini taken (because it is the default device for audio)

In addition,

I ordered the bridge thinking music that he could solve my problem.

Will I have the same problem with it when 2 bluetooth devices are connected? for example, the audio gateway and my bluetooth headset.

Should be able to assign the bluetooth services specific to the results of the default value.

for example Audio > mini plug if it is present as a default value if no, he can use bluetooth

Calls > bluetooth headset.

Hope that makes sense.

Dave

The Blackberry music gateway solves this problem (kind of) works better... when the two jabra or any other headset device is connected and the music gateway is connected it muffles call correctly and works correctly...

The new problem is introduced only if you have a headset (bluetooth or hands-free headset) that also supports music services. (The two compete to connect to theses services)

I suggest buying a hands-free device that does not support music services (only a helmet) and then you should not meet for the problem below

Read this new thread to see the solution to this new problem, if it still exists.

http://supportforums.BlackBerry.com/T5/BlackBerry-Z10/Bluetooth-services-and-BB-music-gateway-enable...

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

    The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

    It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

    I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

  • Smartphones blackBerry sync a Blackberry Pearl 8100 to a Sony Ericsson earpiece/Headset Bluetooth wireless

    Via Bluetooth, I synced my Blackberry 8100 Pearl for my Sony Ericson Bloothtooth Headset HBH-DS200 stereo.  The devices are connected, but when I play music from the phone, music comes out of the Blackberry speaker rather than the helmet of the Sony Ericsson headset Sony Ericson is A2DP compatible.  Does anyone know if the Pearl 8100 is compatible A2DP and yes there at - it an option to disable this active or disabled on the phone?

    I see in the instructions for Blackberry on the 8100 that the "Source Audio" profile is A2DP but how do to this profile source?  From Sony Ericsson's Web site says the Blackbery 8300 is compatible with the headset, but did not mention the Pearl 8100. Thank you.  Miles

    The 8100 is only compatible A2DP if you improve its OS to OS 4.5.  Look into the Options > on.  If it says 4.2.x.x, then you need to upgrade.

    Here is a link that should help you:

    http://www.BlackBerryForums.com/General-8100-Series-discussion-Pearl/149548-latest-OS-8100-4-50-92-4...

  • earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

    After you have installed windows 8 in my laptop, I've just matched with my nokia BH-503. But after cutting the first time, I don't then reconnect with my laptop. My windows is already updated, but still, I am facing this problem. Even now when I try to add my audio device my laptop can not find this. But I can easily connect this audio device with my laptop and windows 7. So eventually, I'm sure that WINDOWS 8 I have this problem. I already searched a lot information of websites & questions, answers, but still this problem have no solution.  Its very sad news for users of windows 8. :(

    Headphones Audio/stereo/headset BLUETOOTH Connection with WINDOWS 8



    Hi! It's Pranzell. Guys, it's like a very simple. Here, follow my steps :

    1. Switch Off your bluetooth device. Any device, just turn it off.
    2. now the charms blow bar and open settings ->  change the settings of PC-> devices.
    3. keep it button / STOP for 8 seconds or more until a BLUE led flashes and Flash.
    4. your device came into PAIRING MODE, quickly, click "Search devices" in your computer.
     
    5. remember the blue led of your device blinks just 3 minutes (Nokia/hTC/Blackberry/Jabra/Phillips) search and pair your device in this time only.
    6 install/update the drivers manually if necessary. W8 is usually installed in everthing.
    7. the pairs! You will receive a notification, "added stereo Audio Gateway".
    8 open the Panel of control-> hardware and sound-> sound-> the Read tab.
    9. right click on the new added device and assign as the default value. 
    10 say thank you!  :)
  • Portege M200, earpiece/headset Bluetooth

    Hello

    I have a portege M200 (M725) with a bluetooth adapter.

    I'm trying to connect my headset bluetooth Qware. It is recognized, but it doesn't connect. A message like "can't connect device.

    Would it be possible that the standard Bluetooth adapter does not support headsets?

    Please help our.

    You have the latest Bluetooth Stack & drivers installed?

  • Numbering with earpiece/headset bluetooth problem

    I have a headset bluetooth jawbone and whenever my phone is locked (with fingerprints fingerprint and password), I can't make calls or even deal with it. The only way I can do anything, that's if I unlock my phone. When there is an incoming call, I can use the headset to answer, but other than that, nothing only works when the phone is locked.

    Y at - it an option that I have to toggle or is this just a problem with the phone itself?

    @zerotrunks,

    I'm having the same problem. Bike is addressing this issue. If all goes well it will be addressed in a future update.

  • BlackBerry smartphones, listen to the music of earpiece/Headset Bluetooth

    I need a bluetooth headset that can also stream music from my Curve 8900. Any suggestions please?

    Mono or stereo?

    BlackBerry HS500 toured with mono and will soon be available.

    http://www.ShopBlackBerry.com/_blackberryaccessories/cgi-bin/PD.cgi?FromPage=category&page=product_d...

  • JLab GO earpiece/headset Bluetooth connected but not available for audio playback

    I have connected the Bluetooth device and you can see the two Bluetooth devices as well as devices and printers.  But when I go into Control Panel and sound is not an option for playback or recording.  I uninstalled the device and repaired.  I also entered in the properties of the device and the Services tab and activated flow hands-free calling, Audio, headphones and remote control.  The device works fine on my 2 Surface Pro and my LG Android G2 phone. Any ideas would be greatly appreciated.

    Hello Pierre,.

    Thanks again for the response.

    I suggest you try using the steps described in this article and check.
    Reference:
    Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device
    http://support.Microsoft.com/kb/2654568

    I hope this information helps.

    Thank you

  • Voice of selected from earpiece/headset bluetooth blackBerry Smartphones

    Hello

    have a 8310 and a Motorola H700 bluetooth headset.  Voice dialing from the headset worked fine when I first set up, now I get a single short low tone when I press the call button on the headset and it does not "say a command" no more.  Orders voice work very well through the headset if launched from the phone.  I have re-couple to the headset (several times).  I tried my helmet on my wife's phone, and he began composing voice as it should.  I tried his H700 to my phone and it has the same symptoms.

    Any ideas?

    Nick

    Problem solved.  I out the battery for a few minutes and the phone then restarted when I put back it. Now it works perfectly, as before.

  • Smartphones from blackBerry Bold 9900 - can't see any earpiece/headset bluetooth

    Hello

    I'm having a problem with my new "BOLD".

    I can not pair it with a bluetooth headset, specifically, is not detect any bluetooth headset (I tried with 3 different models).

    I don't know that Bluetooth works because I can connect the device to my PC.

    I've tried everything, I put in pairing mode so headphones listening and the device but still nothing.

    I tried 'listen' mode and 'search' mode and yet nothing works.

    someone has an idea of what it could be? At this point, I think of a hardware problem, could it be?

    This may seem a minor issue for someone, but I'm often driving while talking on the phone, cannot do without this option.

    Help would be appreciated!

    Thank you guys!

    Problem solved.

    go to the bluetooth options and remove the flag of encryption and transfer address book.

    in this way, it worked for me and could see the devices.

    Also, make sure that you are using with your bluetooth pairing headset.

  • Error "adding the unit failed, resulting in an unknown error." 0x80004005"when you add earpiece/headset Bluetooth

    I'm having a problem new pairing my Bluetooth headset with my laptop.  I am running Windows 7 Enterprise 64.  I repeated this behavior with 2 different helmets.  Here's the problem:

    1. I pair the headset with my laptop and everything works fine
    2. I go to Bluetooth devices and remove the device from headphones
    3. I try then to pair the headset to the laptop and the error message

    I was not able to find anything online to help.  I spoke with the manufacturer (Plantronics) and they were also able to help.  Surely, there has got to be a way so he could pair up again.  I am desperate for help.  I really want to rebuild my machine just to get the headset to be paired again.

    Thanks in advance for assistance.

    Hi guys,.

    I could not pair either of my two headphones to my Windows 7 computer.  Here's what fixed it for me.  In devices, Radios, Bluetooth Manager, I opened the properties for my radio (2046 Broadcom Bluetooth 2.1 + EDR USB Device with First Connect).  On the Advanced tab, I took the dash on my radio name.  The headphones paired immediately after that.

    This is a pretty serious bug because the radio takes its name from the computer name, which is the name of user-PC by default when you install Windows 7.

    I hope this fixes your problems.

    Note that to actually use the headset, you will probably need to update your Bluetooth drivers if you haven't done so already.  Go to http://www.broadcom.com/support/bluetooth/update.php

  • Number of any his earpiece/headset Bluetooth

    Original title: Bluetooth device does not work

    I can't with a new bluetooth headset and an adapter for my computer I bought. I use Windows 7 Professional 64 - bit with a BTD Kinivo - 400 bluetooth adapter. My computer recognizes the card and you can connect to my helmet, but I can't not all sounds to play on the headphones and I can not activate the helmet via Control Panel > sounds. Is there a way can I fix?

    Hello Joshua,.

    Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

    Looks like Windows Installer crashes when installing the driver for the Bluetooth audio device and drivers does not proceed with the installation correctly.

    See the suggestions by Microsoft community animator and author of Wiki Andre Da Costa, on June 10, 2011 to unsubscribe and reregister Windows Installer and check the installation of the driver.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Installer-Windows-Setup-has-stopped/15e20146-4E4A-488b-A226-c9bfb60f836b

    I hope this helps. Please let us know the results.

  • Connected to earpiece/Headset Bluetooth earpiece

    Hello, is it possible to listen to the event when a bluetooth headset is connected?  The headset uses the hands-free profile.

    I tried the BluetoothSerialPort which does not pick up the helmet because it does not support the serial port profile.  I watched the javax. Package of Bluetooth but it doesn't seem to be a listener to connect bluetooth devices, unless I missed something.  I searched through the forum and could not find a solution.

    Any suggestion would be appreciated,

    Thank you

    Follow-up:

    I realized that if I put the audio track of a Bluetooth (AudioPathControl.AUDIO_PATH_BLUETOOTH) player and it returns a MediaException, it means that no bluetooth headset is connected, who works for what I need.

  • BlackBerry Z10 default browser is Bing?

    With my new Z10, I noticed that when I go to the browser and search it seems Microsoft Bing as default. What is normnal or is editable at all?

    Help?

    http://CrackBerry.com/how-change-default-search-engine-BlackBerry-10

  • ZBook 15 G2: Earpiece/headset Bluetooth does not connect

    I have a bluetooth Sony MDR-10RBT headphones, who used to work with my laptop HP ZBook 15 G2. I don't know what happened, but it no longer works.

    Can I pair the headset, and it appears in the printers and devices window.

    However, when I double click on the headset icon and get the window where I can click on listen to music or VoIP calls forward to hands-free, they are both greyed out.

    If I look in the services:

    Bluetooth support Service: not started, automatic

    Bluetooth OBEX service: not started, automatic

    : Supported Bluetooth started, manual repair

    If I try to start Bluetooth Media Service, I get an error 1053.

    I updated the driver for Bluetooth Intel for the WLAN 7260/3610 (American International) to 17.1.1504.518 Rev.A
    June 29, 2015. I don't know what that replaces, because when I look in device, under the Intel Wireless Bluetooth 4.0 card Manager, it still says 17.0.1401.422.

    Any suggestions where to look next would be appreciated.

    stringy76,

    I found this remark about Intel. Apparently, there are two Microsoft Updates that break Bluetooth on Intel.

    https://communities.Intel.com/thread/104851

    If you follow these steps, you should be able to reinstall these updates and your headphones working again.

Maybe you are looking for