BlackBerry Z10 Facebook presents more than once in the HUB!

Similar Questions

• Can transfer easily to be run more than once on the receiving system?

  Can transfer easily to be run more than once on the receiving system?

  I installed Win 7 on a separate XP drive and I am able to switch between them starting from their respective readers.

  I made an easy transfer between them and now intend to install it and test my programs on Win 7.  Once I've got everything working properly, and that all migration issues are resolved, I would like to make a clean second run Easy Transfer of XP just before the final switch to Win 7.

  "Clean run" I mean I want all the Win 7 system to be completely replaced by the new data and the parameters of the XP system.

  Easy transfer will do that?

  What I would recommend that you do, is create a new account user in Windows 7, then restore the backup Windows Easy Transfer in the new account and delete the old account that you created in the first place.

• What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  What type of eloqua email send should I use to send an email more than once to the same beneficiary?

  In the canvas on the box email, there is a parameter that must be checked in order to send the same e-mail several times for the same contact. Enable 'Allow emails to be retransmitted to previous winners' and you're ready.

  

• How to repeat the same line more than once in the report 10g

  How to repeat the same line more than once in the report 10g
  
  If I print the barcode more than once
  in the report;
  
  Published by: user11106555 on May 9, 2009 05:50

  OK, thought it was just a recording, then try:

  SELECT COL
    FROM TABLE,
         (SELECT 1
            FROM DUAL
           CONNECT BY ROWNUM
  

• Import of Lightroom - Flash player appears more than once in the source and destination

  How can I remove Flash Player from the list of destinations and sources of import?

  I recently had considerable difficulties, download Flash Player to view the video from the site, but now it appears more than once in Lightroom.

  MacBook Pro El Capitan. Lightroom CC. Thank you.

  Those are probably your Flash installation disc images.  You see them on your desktop.  If so, drag them to the trash.   If they are not on your desktop, restart your computer and may disappear from the import dialog box.

• BlackBerry Z10 removal of hundreds of Messages in the hub to a single click of 1 button?

  Hello

  I have a Z10 and love the phone.

  I have all my 10 email accounts hung in the HUB which is absolutely awesome!

  What I want to know, is there an easier way to remove hundreds of emails from the HUB, once I do a specific search instead of clicking the button 'SELECT PLUS' and individually by selecting one at a time...

  I wonder if as in Outlook, you can click on the email at the top of the page and then shift and click on the email from the bottom to select as many messages as you like and delete them all at once?

  If this isn't the case, I hope that someone will add it to the list of the already excellent features, the phone has.

  Please let me know.

  Thank you

  TW

  I don't know if you are aware of the function delete prior. It allows you to delete all messages prior to a given date. The only thing with this function, it is that you cannot select individual messages to maintain, but if you want all went to a date selected and previously, press on and keep the date in question in the menu that opens you just tap on the icon to the trash with the arrow pointing down on this issue.

  I hope that helps you.

• How can I get a sound to play more than once using the Commons of edges?

  Hi, I'm very new to all of this; If Mylène so ask dumb stuff...

  I used successfully the communes of edge to get an audio effect to play on a timeline, but it will play only once. Anyone know how I can get it to play again at various times of relaxation?

  The code I use in creationComplete is:

  yepnope({
            load: "http://simonwidjaja.github.com/EdgeCommons/live/EdgeCommons-0.7.1.js",
            callback: function() {
  
  
  
  
                      // Load sound manifest (e.g. in creationComplete)
                      var assetsPath = "media/";
                      EC.Sound.setup(
                          [
                                {src: assetsPath + "bubbles.mp3|" + assetsPath + "bubbles.ogg", id: "bubbles"},
                          ],
                          function(){ EC.info("Sound setup finished", "DEMO"); }
                      );
  
  
  
  
                }
  });
  
  

  I then in a trigger on the timeline:

  EC.Sound.play("bubbles");
  

  As said, plays the foregoing, once... but if I place another, 'EC. Sound.Play ("Bubbles");' trigger further along the scenario, nothing happens. Similarly, if audio has already played and the lines of the timeline, the audio will not play a second time. I think I have to write in certain kinds of "unload" kind of thing, so he can play again when it hits the new trigger? Or I could just talk to Cobblers? Who knows? I certainly don't have which is why I desperately need help... Please x

  Have you tried to put the code to specific locations in the timeline?

  Here's a samlpe:

  https://www.box.com/s/3cf7sh7mtwzpvfqmynt1

• Possible to insert more than once in the same table using multi table insert?

  I used multi-table insert before insert a source separate from the tables without problem.
  
  However, when I want to insert into the same table two or more distinct lines, I encountered a problem because when I call nextval on the sequence since this is the same sequence # will try to use the same number for two inserts, which will raise a violation of PK constraint on the 2nd insert.
  
  A way around this problem?

  Another option is to create the sequence with increases of 2 or however many tables, you are targeting.
  When you then specify the. NEXTVAL, you must subtract the relative number of it, apart from the first table that you insert in to.

  Something like that;

  drop table t1;
  
  create table t1 (a number, b number);
  
  drop table t2;
  
  create table t2 (a number, b number);
  
  drop sequence test_seq
  /
  
  create sequence test_seq increment by 2 minvalue 0
  /
  
  insert all
  when 1 = 1 then
    into t1 (a, b) values (test_seq.nextval, 1)
  when 1 = 1 then
    into t2 (a, b) values (test_seq.nextval  - 1, 1)
  select 1, 1 from dual
  /
  

• Score editor {} why a musical note appears more than once when the key was pressed only once? (Image)

  Thus, for example, ringed RED notes are not affected at this time there, then why they arise after the GREEN circled notes, which are affected. It has to do with the length of the MIDI note or sustain? (I have the pedal which is held for the entirety of the song)

  Note, I'm seriously new whereupon on sheets of music, so I apologize if it's both obvious and a very simple solution. Thanks for the help!

  

  This has to do with the length of the midi note. Make sure you play on a click track (turn on the metronome) and slow down a little if necessary (tempo).

  Also turn on syncopation to eliminate some of the links and according to your needs... set the quantize to a lower value for example display 8.  You define quantize for the smallest value you want to play (if its 8th note - 8, then black - 4 then - sixteenth note 16 etc.).

  

• I get "proxies cannot be captured by a stateless session" when I try to log in to this site. I went there there more than once in the past, but this is the first time I received this answer and you are unable to log on to this site.

  I've logged on this particular site, http://www.springairsystems.com/SpecAndQuote/User/Login/View.aspx a number of time's recent past. When I try to log in now, I get a prompt in red letter indicating, "proxies cannot be captured by a stateless session." What should I do to open a session? I set my privacy settings to allow cookies from Firefox, but is not alleviate the problem.

  See this - http://en.wikipedia.org/wiki/Proxy_server

• setTextFormat() more than once on the same channel?

  I try in vain to attribute a textFormat to two different parts of the same chain, but the second time, it does not record and remains the default text format. the two styles (regular and "BOLD") of the police are incorporated.

  //Create Text Field
  private function createAboutWindowTextField():TextField
      {
      var aboutWindowFont:Font = new AboutWindowFont();
  
      var regularFormat:TextFormat = new TextFormat();
      var boldFormat:TextFormat = new TextFormat();
  
      regularFormat.size = boldFormat.size = 12;
      regularFormat.font = boldFormat.font = aboutWindowFont.fontName;
      regularFormat.align = boldFormat.align = TextFormatAlign.CENTER;
      boldFormat.bold = true;
  
      var result:TextField = new TextField();
      result.antiAliasType = AntiAliasType.ADVANCED;
      result.autoSize = TextFieldAutoSize.LEFT;
      result.defaultTextFormat = regularFormat;
      result.embedFonts = true;
      result.multiline = true;
      result.selectable = false;
      result.type = TextFieldType.DYNAMIC;
  
      result.text =   "First Header\n" +
                      "Version 1.0\n" +
                      "Copyright © 2011\n\n" +
  
                      "Second Header:\n" +
                      "Other info";                                                       
  
      result.setTextFormat(boldFormat, result.text.indexOf("First Header"), ("First Header").length);
      result.setTextFormat(boldFormat, result.text.indexOf("Second Header:"), ("Second Header:").length);
  
      return result;
      }
  

  the code above should result in the two "first header" and "second header:" become "BOLD", but only "first header" will be put in bold while "second header:" seems to be simply ignored. What is the problem?

  I was told that it would be easier to use the style sheet / HTMLText, but I don't and I don't know if they said it is not possible to apply multiple instances of the same textFormat to a textField without using the HTMLText and style sheet, I'd find ridiculous if true.

  somoene in another thread has answered this question.  the 3rd parameter in my setTextFormat is incorrect.  I was specifying a length not an endIndex.  I'm officially retarded.

• Can afford you an Eloqua contact enter the same campaign more than once at the same time?

  I have a use case where a campaign on the Web has two different webinars to choose. If contact resumes the periods it only will allow them to follow a path. Y at - it a way to allow a contact of the two options, or it will have to be broken out into two individual campaigns in order t work properly? Thanks for any help you can provide.

  Unfortunately there is no work around that would touch even in one campaign several times. Both campaigns is the only option for this case.

• How to add a container in another more than once in qml.

  Hi all

  I want to add a container to another container more than once, and many times will change according to the requirement. I try to add the container using JavaScript, but it does not work. I want to do this in qml not in the PRC.

  Please provide suggestion for this.

  Thanks in advance.

  You can use ComponentDefinition to declare the element you want to clone:

  https://developer.BlackBerry.com/Cascades/documentation/dev/dynamic_qml/

  Then create using .createObject and .add to the first container several times in a loop for.

  Another way is to create a ListView and manipulate it is dataModel to create a required number of points.

• I am (early 2013) iMac 21.5 inch 8 GB which is sutting down then restart unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions?

  I have an iMac (early 2013 21.5 inch 8 GB) which stops and then restarts unexpectedly often more than once a day. I ran the diagnostics of material, check the permissions and disk. All are no problem. Any suggestions? I bought this machine this June last at B & H in New York.

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• artists are to display the window more than once in sync

  iTunes version 12.2.4.   In the timing window on the right side under "Artists" of some artists appear more than once.

  For General and advice on the Organization of the iTunes, see grouping of tracks in albums . In particular, any given artist name should be spelt constantly everywhere where it appears in the two fields artist album and artist, and still have the same sort value.

  TT2