BlackBerry Z10 Z10 drops off network when full load

My phone frequently falls network (Orange) when he finished filling, returning on the emergency calls only.

Market seems clear about this.

I did a reset of the device and have reinstalled the operating system (10.1.0.2312), but the problem persists.

Any ideas please?

Don't know what it could cause but maybe try settings / network connections, click your network Mobile, then the network selection Mode. You will see that you are in automatic mode. Press "Manual" - this will make you to loose connection momentarily your unit will search for available networks. You will see your own list (among others). Select that and back off settings leaving set on manual (providing you do not make a roaming). This will you have reconnected to your network and can potentially be more stable.

At least it's something to try.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry Z10 regarding problems of internet connection on blackberry z10 using sim network connection & Derek bsnl

    Dear all,

    I am the first time the z10 blackberry user & use the services on network of BSNL (MAHARASHTRA) India.
    I am able to use internet for awhile when I swith the cell phone on, but inside a few connection minutes is lost & msg read ischeck network connection & try again & then I don't get the connection. Z10 BlackBerry supports the GPRS of BSNL service provided but I am not able to use internet services please help

    PLIs tell me done blackberry z10 will require anti-virus software for the Internet virus threats
    Stéphane jeandonnet

  • House WVC54GC - drops off network slot and time. Help!

    I bought an new rounter wireless, WRT310N, the other day.  While I was in the store, I saw the wireless, WVC54GC camera and picked up one of those too.  So far, the router is running and I won't have problems to connect to the internet with my laptop.  I've set up the camera yesterday using the supplied configuration software.  It worked fine for a few hours, but then began to fall sharply the wireless network.  I tried the camera power cycle, but it won't even connect back to the network when I do this.  I plug in the back of the router by an ethernet cable so that it can work.  When I unplug it it will work for an hour or two, but then drop the network again.  The router is about 100 feet from the camera - what is in my garage.  I did a little reading to try to understand my problem but have failed again. I have reset the channel on my router to 11 but it helps didin't.  I put a static IP address on the config of cameras menu.  I even cut my total network encryption (I live in the woods of 1/2 mile from the nearest road or home).

    Any suggestions on how I can get this thing works more reliably?

    Distance from my primary wireless router was the problem.  I used my old router and I replaced the firmware, set up as a Repeater and put it in the room with the cam, and now, it has worked well for several days.

  • Phone smart BlackBerry Z10's secure network. (hard locked)

    I bought a blackberry through eBay z10. And it's an any phone. My brother has entered unfortunately bad MEP code 10 times. And now it is hard locked. No Sim card doesn't work. What do I showed this phone for each and every service centers to Indore (India). But they could not unlocked it. So please help me

    He can't be unlocked. It is permanently blocked.

  • BlackBerry Z10 'unexpected error' (-3) when trying to play music or video

    Since the last update of Blackberry Maps, I've updated my Z10, I can't play music or vdeos. By clicking on the titles of music or video titles, the message: "unexpected error (-3).

    Anyone any suggestions how to solve this problem?

    Thnx for your comments. Made a cold start then Z10 connected to the pc via the link of blackberry, updated and synchronized. Now everything works perfectly. Problem solved. Detective Conan.

  • Is BlackBerry Z10 My Icon disappear when I wipe my bb10

    Icon

    Nice day

    What do you mean icon? Do you mean that you do not see your old applications you had before is erased?

  • BlackBerry Smartphones Wi-Fi\Mobile network when browsing the web

    Hi all

    When I'm on the web on my torch to use my mobile network connection or wifi if there is a configuration of WiFi and available?

    May seem obvious, but I can't say what connection it uses.

    Thank you

    When the two networks are connected the camera automatically chooses to use wi fi network.

    I hope this helps.

  • BlackBerry Smartphones SMS and MMS icon when I load my custom theme

    I built a custom theme using the Plazmic 4.1.0.19 theme generator. When I insert the new theme, the SMS and MMS icon is gone. My theme is set to display the first 10 icons that you see when you press the MENU key. For some reason the SMS and MMS icon is not there anymore. All other icons are there. When I switch to my old theme, he's there. No one knows what causes this problem.

    I ran a test by creating the topic without using the order of application device and put the SMS and MMS icon on the home screen. When I insert this theme to test, the SMS and MMS icon area is just a dark background on the home screen.

    I made a minor change in the theme and reloaded on the "BOLD". This seems to fix.

  • How to turn off the notification full load?

    A lot of nights iPhone 4S my wife reports load complete and wake up with a his bong several times. I searched on the configuration options for a way to disable this without success. I saw historical discussions on this issue, but never a resolution. Many claim that no notification is on the iPhone, but to show them that those of us who suffer from it are not imagining things, here is a photo of the notification on the screen after that sounds occur.

    Hi Billy,

    The notification seems to be just the phone switch to low power mode.

    If you remember to take the phone out of low power mode once you put it on charge, notifications must stop.

    Hope this has helped

  • BlackBerry Z10 a Z10 works fine, the other one has trouble connecting to the mobile network

    Hi, my wife and I have the Z10, and we're both on the same mobile network (Wind Mobile to the Canada). Z10 wife seems to have no problem connecting or staying connected to Wind Mobile. Mine on the other hand seems to randomly drop the connection, or struggled to get connection and sometimes ends homelessness.

    The only difference between the two of the Z10 is its is purchased through Wind Mobile itself, it is locked to their network at the moment. I bought mine a little later and I bought mine directly via the webshop of Blackberry, and it's why, mine is unlocked. What I have to do sometimes is to disable the mobile connection and turn it back on and it works after I do this. However, it is annoying, as I would rather automatically retry the network connection so that it is not go roaming in my own city.

    It is possible that a new sim card can help. Worth a try. I'm guessing, however, that, since one is that she has the ability to see other networks when the locked is not unlocked.

    That said, I use a unlocked Z30 and don't have these problems. Try a new sim card and see what happens.

  • Z10 Z10 crahses Blackberry BlackBerry; does not turn off button, and struggles to access the hub

    I just got a new blackberry Z10. which I believe has been refurbishing My Vodafone provider.

    The blackberry is so bad that they actually sent me a knew phone and does not want this return of blackberry but I am frustrated by the latter.

    When receiveing the blackberry, I got the unlock code to unlock it, it worked perfectly.  Once unlocked, I entered my Vodafone SIM that didn't do not need to still use it with another sim card.

    First, I updated the blackberry for the last version of the software and complete the set up process.

    Then I restored my old data from my previous Blackberry Z10, which also does not (various issues)

    The phone blocks (blocks) and did different things; the screen freezes and does not even turn it off the button, I have to take the battery out to restart it, or I have to screen does not freeze, but you cannot access texts/emails or contacts and he says 'prepare the hub' but never really in it.

    Sometimes it will allow me to use the off button, but especially, I have to take the battery out and put back starting.

    It is possible to make a call sometimes, but he cuts during the call.

    I have reset the blackberry back to the factory settings and even tried to use with on a restoration, just in case my data has been corrupted somehow.

    I tried to use it with a different network sim card and also tried it with a sim card, just so use it on wifi, the same problems.

    I was sent a new battery so tried both batteries.

    I have reset to factory several times.

    Any help would be appreciated.

    Linda

    It happens to any type of equipment.

  • BlackBerry Z10 Z10 not advising me when the texts/emails/etc. arrive in the hub

    My Z10 using the 10.1.0.4181 software, model STL100-2.

    Since Friday I stopped to receive notifications when a text, email or FB update arrives in the hub, and the LED is not blinking either. The only way can I getmy hub update is by restarting the phone, which is obviously something that's very boring and not something that I can get all few minutes do as I have work to do, but I missed now three texts important members of the family today, more that I am waiting for an important and urgent email regarding my mortgage which I can't afford delay respondent.

    Anyone know what's going on and how can I fix?

    Please check:

    http://forums.CrackBerry.com/BlackBerry-Z10-F254/hub-notification-issue-i-think-i-solved-myself-8532...

  • Is it possible to use virtual touch keyboard when a HID barcode scanner is connected to BlackBerry Z10?

    Hello everyone!

    I intend to build a web application for the BlackBerry Z10 with which you can scan bar codes for inventory management. For this I use a KDC200 Bluetooth laser scanner barcode. I've used this scanner barcode with the BlackBerry Bold 9700 and a Java application using the net.rim.device.api.bluetooth.BluetoothSerialPortListener. The scanner was then developed the SPP (Serial Port Profile) mode and this solution worked well.

    Now with the Z10 BlackBerry, I connect the Bluetooth bar code scanner as a HID device because the PSP seems to be taken in charge by the Z10 (?). With PSP no connection can be established at all. This type of connection setting (HID/SPP) can be switched on the scanner device. When the scanner is connected as a HID, the value of the scanned bar code is correctly written in the input field focus on the BlackBerry. But now, there is a downside: as long as the HID scanner is connected, touch virtual keyboard of the Z10 is disabled and does not appear when you tap on an input field - in any application.

    These input methods (HID vs virtual keyboard) are mutually exclusive, or is at - it a way to get the virtual keyboard works while the HID scanner is connected? In my web form there is sometimes a barcode field and normal input fields, for example to analyze a bar code, and then manually enter a quantity.

    BTW: for ergonomic reasons, there is no to enter the barcode with the camera of the smartphone. In addition, the solution must be implemented in the form of a web application.

    Are there opportunities?

    Best regards.

    Have you tried the Salvation two fingers?  Swipe up from the bottom of the screen with two fingers to open the keyboard.  I found that this worked when the keyboard was unable to present themselves on the fields of entry on some websites.

  • BlackBerry App WIFI turns off on Z10 10.3.2.556

    I've been 10.2.1.xxx for a long time. Then I upgraded to 10.3.1.xxx. In a week or two, 10.3.2.xxx became available. After that AT & T has done 10.3.2.556 (10.3.2.858) available, and I upgraded to that.

    Since my upgrade to 10.3.2, my WIFI off by itself from time to time, but especially at night. It is not uncommon to find off WIFI when I look at my phone first in the morning (she is always loaded in the night).

    Anyone else seen this? Any idea of what is the cause? No idea how to fix?

    Thank you.

    Stone

    Hello and welcome to the community!

    When things go wrong, after a 'update' or an 'upgrade' (as opposed to a correct and complete any level of the OS installation), the most common thing to try is a reload of the OS. Sometimes, those up-to-date process leave in place corruption that a clean install would be able to heal.

    Official methods, which will be controlled as to what exact OS versions are available:

    Non-official methods, which are cleaner and allow you to choose a version of the OS that maybe your carrier (or anyone they control your offers) delays in approval:

    Of course, before you start this, you want a good backup link, a manual copy of the memory of your device to your PC and complete documentation of your configuration (identification information of account, adding applications, configurations, etc.). Sometimes, restoring a backup returns unit corruption even, must be eliminated and reconfiguration from scratch can solve that.

    Good luck!

  • BlackBerry Z10 Facebook app is full of *.

    The facebook app for blackberry z10 was supposed to compete with the iphone one (courses, it was a joke).

    no possibility to chat

    no control over what type of stream to get (most popular or most recent)

    and no ability to add a place to retrieve

    the Z10 version is worse than my old 9900!

Maybe you are looking for