BlackBerry Z10 Z10 will not accomplish configuration after the update of device software, help please.

Similar Questions

• Service SQL Server 2014 will not start start after the update sp1 (KB3058865, KB3075950, KB3094221)

  Hi, my SQL Server 2014 works very well in my server with WIndows 2012 until I installed the new day & service pack that was required for server hardening.

  I successfully installed SP1 KB 3058865 first, then discovered that the services do not start. After so much research to fix, I came with the 2 cu updates KB3075950, KB3094221 in knowing that it could solve my problem but unfortunately is not.

  I also tried to change the service account that many suggest, but his does not work.

  I tried to replace the master file & maslog but also failed.

  I tried to run etc and unique usermode and restore master db... also failed.

  Here is the log file:

  16/02/01 15:21:21.83 Server Microsoft SQL Server 2014 (SP1 - CU3) (KB3094221) - 12.0.4427.24 (X 64)
  October 10, 2015 17:18:26
  Copyright (c) Microsoft Corporation
  Standard Edition (64-bit) on Windows NT 6.2 (build 9200 :) (hypervisor)

  2016-02-01 15:21:21.84 setting the server UTC: 08:00
  2016-02-01 15:21:21.84 Server (c) Microsoft Corporation.
  2016-02-01 15:21:21.84 server all rights reserved.
  2016-02-01 15:21:21.84 server process ID is 5128.
  2016-02-01 15:21:21.86 Server system manufacturer: "Microsoft Corporation", model of system: 'Virtual Machine '.
  2016-02-01 15:21:21.86 the server's authentication mode is MIXED.
  2016-02-01 15:21:21.86 Server record SQL Server messages in file ' C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG'.
  2016-02-01 15:21:21.86 Server service account is "NT Service\MSSQLSERVER". This is an informational message; no user action is required.
  2016-02-01 15:21:21.86 registry server startup parameters:
  -d C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\master.mdf
  e C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\Log\ERRORLOG
  l C:\Program Files\Microsoft SQL Server\MSSQL12. MSSQLSERVER\MSSQL\DATA\mastlog.ldf
  2016-02-01 15:21:21.86 Server startup command line parameters:
  s 'MSSQLSERVER '.
  2016-02-01 15:21:22.27 Server SQL Server has detected 1 struggling with 1 cores per socket and 1 logical processors per socket, 1 total logical processors; using 1 logical processors based on SQL Server licenses. This is an informational message; no user action is required.
  2016-02-01 15:21:22.27 Server SQL Server starts at the normal base priority (= 7). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.28 Server has detected 7999 MB of RAM. This is an informational message; no user action is required.
  2016-02-01 15:21:22.28 Server using conventional memory in the memory manager.
  2016-02-01 15:21:22.33 default server collation: SQL_Latin1_General_CP1_CI_AS (us_english 1033)
  2016-02-01 15:21:22.37 Server this instance of SQL Server is a latest report by using a process ID of 1600 at 01/02/2016 15:13:12 (local) 01/02/2016 07:13:12 (UTC). This is an informational message only; no user action is required.
  2016-02-01 15:21:22.38 the maximum number of connections administrator dedicated to this server instance is '1 '.
  2016-02-01 15:21:22.38 configuration of server node: node 0: CPU mask: 0 x 0000000000000001:0 Active CPU mask: 0 x 0000000000000001:0. This message provides a description of the NUMA configuration for this computer. It is an informational message only. No user action is required.
  2016-02-01 15:21:22.40 allocation of dynamic locking using the server.  Initial allocation of blocks of lock of 2500 and 5000 per node lock owner.  It is an informational message only.  No user action is required.
  2016-02-01 15:21:22.43 spid8s start database 'master '.
  2016-02-01 15:21:22.49 Server CLR version loaded v4.0.30319.
  2016-02-01 15:21:22.51 spid8s d - 8 operations in the database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.61 Server common language features (CLR) runtime initialized using CLR version C:\Windows\Microsoft.NET\Framework64\v4.0.30319\ v4.0.30319.
  2016-02-01 15:21:22.62 spid8s 0 operations cancelled in database 'master' (1:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.62 spid8s Recovery is writing a checkpoint in database 'master ' (1). It is an informational message only. No user action is required.
  2016-02-01 15:21:22.79 spid8s SQL Server Audit begins audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.80 spid8s SQL Server Audit has begun audits. This is an informational message. No user action is required.
  2016-02-01 15:21:22.88 spid8s Trace SQL ID 1 was launched by the "sa" login
  2016-02-01 15:21:23.28 spid8s server name is "UATCASADB". It is an informational message only. No user action is required.
  2016-02-01 15:21:23.28 spid13s A self-generated certificate was loaded successfully for encryption.
  2016-02-01 15:21:23.33 spid13s Server listens on ['none' 1433].
  2016-02-01 15:21:23.40 spid13s Server listens on ['none' 1433].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\SQLLocal\MSSQLSERVER].
  local connections provider 2016-02-01 15:21:23.44 spid13s server is ready to accept connection on [\\.\pipe\sql\query].
  2016-02-01 15:21:23.48 Server Server listens on [: 1 1434].
  2016-02-01 15:21:23.49 Server Server listening on [127.0.0.1 1434 ].
  2016-02-01 15:21:23.49 connection admin support dedicated server was created for locally listening on port 1434.
  2016-02-01 15:21:23.49 Server SQL Server attempts to save an of Service Principal name (SPN, service principal name) for the SQL Server service. Kerberos authentication is not possible, until a name for the SQL Server service is SPN. This is an informational message. No user action is required.
  2016-02-01 15:21:23.60 spid14s A new instance of the full-text filter daemon host process has been started successfully.
  2016-02-01 15:21:23.71 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph] for the SQL Server service.
  2016-02-01 15:21:23.72 Server SQL Server Network Interface library successfully registered the Service Principal Name (SPN) [MSSQLSvc/UATCASADB.onenetworkbank.com.ph:1433] for the SQL Server service.
  2016-02-01 15:21:23.97 spid17s start database 'msdb '.
  2016-02-01 15:21:23.98 spid18s database startup "ReportServer".
  2016-02-01 15:21:23.98 spid19s database startup 'ReportServerTempDB '.
  2016-02-01 15:21:24.03 spid9s start database 'mssqlsystemresource '.
  2016-02-01 15:21:24.08 spid9s the base resource database build version is 12.00.4427. It is an informational message only. No user action is required.
  Error logon 2016-02-01 15:21:24.11: 18401, severity: 14, State: 1.
  2016-02-01 15:21:24.11 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:24.18 spid19s 1 transactions rolled forward in the 'ReportServerTempDB' (6:0) database. It is an informational message only. No user action is required.
  2016-02-01 15:21:24.28 spid19s 0 transactions cancelled in the database 'ReportServerTempDB' (6:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.44 spid17s 133 transactions rolled forward in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.73 spid17s 0 transactions cancelled in the database 'msdb' (4:0). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.74 spid17s Recovery is writing a checkpoint in database 'msdb' (4). It is an informational message only. No user action is required.
  2016-02-01 15:21:24.79 spid9s start database 'model '.
  2016-02-01 15:21:25.01 spid9s clearing tempdb database.
  2016-02-01 15:21:25.94 spid9s start database 'tempdb '.
  2016-02-01 15:21:26.12 spid20s The Service Broker endpoint is in a disabled or stopped state.
  2016-02-01 15:21:26.12 spid20s The Database Mirroring endpoint is disabled or stopped state.
  Manager of Service Broker 2016-02-01 15:21:26.15 spid20s began.
  2016-02-01 15:21:27.32 spid8s database 'master' is upgrading script 'msdb110_upgrade.sql' of level 201328592 level 201331019.
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:27.32 spid8s start PRE_MSDB execution. SQL
  2016-02-01 15:21:27.32 spid8s-
  2016-02-01 15:21:28.36 spid8s configuration database COMPATIBILITY_LEVEL option for 100 for database 'msdb '.
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.56 spid8s start PRE_SQLAGENT100 execution. SQL
  2016-02-01 15:21:28.56 spid8s-
  2016-02-01 15:21:28.60 spid8s configuration database option COMPATIBILITY_LEVEL of 120 for the database 'msdb '.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:28.77 spid8s Configuration option 'allow updates' goes from 1 to 1. Run the RECONFIGURE statement to install.
  Error logon 2016-02-01 15:21:29.18: 18401, severity: 14, State: 1.
  2016-02-01 15:21:29.18 of logon login failed for user "NT SERVICE\ReportServer". Reason: The server is in script upgrade mode. Only one administrator can connect at this time. [CLIENT: ]
  2016-02-01 15:21:31.84 spid8s attempting to load library 'xpstar.dll' in memory. It is an informational message only. No user action is required.
  "2016-02-01 by using spid8s 15:21:31.86"xpstar.dll' version ' 2014.120.4100 ' to run the extended stored procedure 'xp_instance_regread '. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC TRACEOFF 1717, process server ID (SPID) 8. This is an informational message only; no user action is required.
  2016-02-01 15:21:31.89 spid8s DBCC execution completed. If DBCC printed in error messages, contact your system administrator.
  2016-02-01 15:21:31.90 spid8s
  2016-02-01 15:21:31.90 spid8s create table temp_sysjobschedules
  2016-02-01 15:21:32.20 spid8s
  2016-02-01 15:21:32.20 spid8s Alter table sysdownloadlist...
  2016-02-01 15:21:32.22 spid8s
  2016-02-01 15:21:32.22 spid8s Alter table sysjobhistory...
  2016-02-01 15:21:32.24 spid8s
  2016-02-01 15:21:32.24 spid8s Alter table systargetservers...
  2016-02-01 15:21:32.25 spid8s
  2016-02-01 15:21:32.25 spid8s Alter table sysjobsteps...
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.40 spid8s Configuration option 'allow updates' goes from 1 to 0. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:32.42 spid8s
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.42 spid8s PRE_SQLAGENT100 execution. Full SQL
  2016-02-01 15:21:32.42 spid8s-
  2016-02-01 15:21:32.46 spid8s DMF pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s DC pre-shaping within walking distance...
  2016-02-01 15:21:32.83 spid8s check if Data collector config table exists...
  2016-02-01 15:21:32.84 spid8s State of collector of data before the update: 0
  2016-02-01 15:21:32.84 spid8s pre_dc100::Check if syscollector_collection_sets_internal table exists...
  2016-02-01 15:21:32.84 spid8s pre_dc100::Capturing Collection to define the status of temporary table...
  2016-02-01 15:21:33.05 spid8s Deleting cached generated automatically collect T - SQL packages to msdb data...
  2016-02-01 15:21:33.05 spid8s end of the DC pre-staged to level as follows.
  2016-02-01 15:21:33.05 spid8s DAC pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s from CAD pre-shaping within walking distance...
  2016-02-01 15:21:33.06 spid8s end of the CAD pre-staged to level as follows.
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.06 spid8s start execution of MSDB. SQL
  2016-02-01 15:21:33.06 spid8s-
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.19 spid8s Configuration option 'allow updates' from 0 to 1. Run the RECONFIGURE statement to install.
  2016-02-01 15:21:33.37 spid8s check the size of the MSDB.
  2016-02-01 15:21:33.63 spid8s error: 8966, severity: 16, State: 2.
  2016-02-01 15:21:33.63 spid8s can not read and lock the page (1:56616) with lock type SH. page no ID invalid. has failed.
  2016-02-01 15:21:33.63 spid8s error: 8946, severity: 16, State: 12.
  2016-02-01 15:21:33.63 spid8s Table error: Allocation page (1:56616) has invalid header values to the PFS_PAGE page. The type is 0. Check the type, unit ID of ID and the ID of the page on the page.
  2016-02-01 15:21:33.63 spid8s error: 912, severity: 21, State: 2.
  2016-02-01 15:21:33.63 spid8s Script level upgrade for database 'master' failed because upgrade step 'msdb110_upgrade.sql' has detected 3601, an error state 5, severity 25. It is a serious condition that could interfere with the normal operation and the database is taken offline. If the error occurred during the upgrade of the 'master' database, it will prevent the entirety of a SQL Server instance to start. Review the previous entries in the error log, take appropriate corrective action and restart the database so that the script upgrade steps run until the end.
  2016-02-01 15:21:33.64 spid8s error: 3417, severity: 21, State: 3.
  2016-02-01 15:21:33.64 spid8s cannot recover the master database. SQL Server cannot run. Master of restoring a full backup, repair or rebuild. For more information on how to rebuild the master database, see the SQL Server online documentation.
  2016-02-01 15:21:33.64 spid8s stop SQL Server launched
  2016-02-01 15:21:33.64 spid8s trace SQL stopped due to server shutdown. Trace ID = "1". This is an informational message only; no user action is required.
  2016-02-01 15:21:34.70 spid8s error: 25725, severity: 16, State: 1.
  2016-02-01 15:21:34.70 spid8s an error occurred trying to empty sessions extended all running events.  Some events may be lost.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc/servername.urldomain] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.
  2016-02-01 15:21:34.71 spid13s the SQL Server Network Interface library could not deregister the Service Principal Name (SPN) [MSSQLSvc / servername.urldomain:1433] for the SQL Server service. Error: 0x2af9, State: 61. Administrator should deregister this SPN manually to avoid client authentication errors.

  -----------------------------------------------------------------------------------------------

  I would be grateful for all the help I can get. Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  TechNet Server forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Satellite Pro L300 will not start until after the update of the BIOS of 1.30 to 1.50

  Dear all,

  I have a Toshiba Satelklite Pro L300 and had no problem for the last 4 years. Last Monday, I replaced my hard drive with a new one and after installing a new copy of Windows XP Pro, I have downloaded all the drivers on the official site. After my last update, I have updated the BIOS to version 1.30 to 1.50. After a few seconds my laptop has rebooted and was not able to load Windows and / or recognize my new hard drive.

  I tried several methods, using safe, optimal Bios default etc but was unsuccessful. IO could not even re - install Windows as the hard drive is not being recognized by the laptop. I've formatted the HD again through my desktop Pc, but still have the same problem.

  I am really worried and would like immediate help!

  Best regards

  Engelbert

  > I formatted the HD again through my desktop Pc, but still have the same problem.
  What happen exactly when you turn on your laptop?

  Set the BIOS as deult and try to install the original recovery image that you got with your laptop. If everything works OK that means upgrading the disk HARD was a success and there is not a serious hardware problem.

  After this check, you can try again to install Windows XP Home edition.
  Please post comments.

• iDVD will not open due to the required debugging atos. Help please I need to produce DVDs with direct access to scenes and have only used iDVD for the years

  I use iDVD to produce videos of my marriage. Latest updates of operating system, the program requires an administrator password to enable atos to continue debugging, and upon entry, iDVD just stops. Is there a way to get around this?

  Hey there WAPhoto,

  I understand that you experience a problem when you try to open iDVD on your computer. I would suggest a troubleshooting step for you that can solve this problem. Please, go to your library folder by using the information in this link:

  In the Finder, click the menu go to the menu bar, and then choose one of the following:

  Library: Hold down the Option key, and then choose library.

  OS X El Capitan: go directly to a specific folder

  https://support.Apple.com/kb/PH22187

  From there, navigate to your Preferences folder. In this folder, find the plist labeled "com.apple.iDVD.plist" and move it to this folder on the desktop.

  Out of this folder and go to the Caches folder. In this folder, find the folder named com.apple.iDVD and move the file named 'Cache.db' in this folder on the desktop as well.

  At this point, you can close the Finder window and relaunch iDVD. If iDVD opens without a problem, you can move the files that you moved to the desktop to the trash and continue to use iDVD as you wish.

  Thank you for coming to Apple Support communities!

• BlackBerry Smartphones A fatal error occurred while updating your device software. Please try again.

  When the installation process is complete... reboot comes nxt and my BB device works now, after a few minutes, it was that appear "a fatal error has occurred while updating your device software. Please try again" and I unplugged my camera... my question is... is this error affect the stability or my DEVICE work?

  I need your answer

  Hi pasakaw

  Have you intrepted the update process anyway... maybe something went wrong shot, while this software update. Currently, what is the status of your BlackBerry is working correctly?

  If you feel any problem, then you should try a refill of OS using desktop software that will fix it any software glitches.

• My creative cloud will not be open since the update to windows 8. How can I solve?

  My creative cloud Manager does not more open since the update to Windows 8. My programs to go, but not the Manager.

  Help

  Hi Julia,

  Please uninstall creative cloud and follow article to uninstall: uninstall the Adobe Creative Cloud desktop application. Once uninstalled CC, then rename folder OOBE C:\Users\[user name] C:\Program Files (x 86) \Common Files\Adobe and \AppData\Local\Adobe\OOBE. After this, reinstall the creative cloud from https://creative.adobe.com/products/creative-cloud

  It could be useful!

  Kind regards

  Shelly

• Qosmio F20-137 will not system restore after the process

  My F20-137 will not restore the system after going through the system restore process. The parameter for the restoration of the system is not in the off position too. Someone there might help me?

  See you soon
  James

  Please check this thread on the Microsoft System Restore tool.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19847&MessageID=72814

  You will find several links to useful pages.

• Windows keeps refreshing. Will not stop even after the resumption of the plant.

  A week ago I decided to test my windows aero desktop number. It was gray with a 4.0 remained to a 4.0. After the test, all operable Windows I keeps refreshing. Content not be refreshed but the fact of the shell (if necessary). If I drag the window it will jump to where I started dragging it since. No one knows how to fix?

  P.S. I did a cover of the factory to try to solve, and it did not work.

  Have you also all the updates and service packs - they had erased at the resumption of the plant and must be reinstalled at all.

  You can get in trouble with your device drivers (those on the factory recovery disc may be obsolete).  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get updates for your video card and monitor at least and all the others you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, it could very well be a real hardware problem (since dismissed pretty much factory relocation a software problem, except for updates unless you have already done as well).  Here's how to do a little troubleshooting on your own equipment:http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  After that, I would either return it to the manufacturer for repair or find a well known local computer repair shop to diagnose and repair (or replace) the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Document will not be saved after the page rotation

  After that I turn a page, it will not save it.  I have a hunch, it's safety because the latter document leave a military installation, but it let me extract pages.  I don't understand. I moved the file copied in different places...

  You probably change the display option, which is temporary and cannot be

  has saved. You need to rotate the real pages if you want that it stick.

• The Desktop of blackBerry Smartphones version 6 not finding phone after the decommissioning of the non working version 7

  OK, so I FOOLISHLY accepted the version of office 7 update notification and downloaded and installed the new version, only to be reminded that I had done this before, had problems and had to downgrade.

  Months ago I had problems and spent hours of my life trying to figure out exactly how to move to version 6, after losing several hours I finally got it working everyone and everything was fine until my moment of stupidity, the other week.

  I now find myself unable to make it work.

  I searched the forum and all I can find thread suggests what I did...

  Where I am now...
  I uninstalled version 7, reinstalled the 6.1.0.35 version (the version that worked, for which I had the installation zip file for on my pc after I had problems earlier in the year)...
  Tried to make it work, without success...
  So I tried to uninstall version 6.1.0.35 completely, turn off the pc, the pc rebooted, reinstalled the version 6.1.0.35, off the pc, restatrted pc, tried to get the software to find the handset

  No joy!

  Anyone point me in the right direction, until I completely lost the plot? !!

  I want version 6.1.0.35 installed and find my phone, and syncronising, as it was before I accepted the update to version 7 by mistake!

  IT SOLVED!

  OK I have persisted, yet another uninstall and reinstall and no luck... but then I thought to look at Device Manager and get windows update software. Now updated, driver, everything works...

• Vista will not be stopped during the update of Windows (see details)

  Reference Dell XPS420, 4 MB of RAM, two 1 GB WD HD, Windows Vista Home Premium, updated with all updates important to Microsoft.

  When I tried to install the latest updates (24 November 2009) using update installs and closes down your Vista computer got as far as "Shutting Down", but does not yet - icon turns on the screen of teal'c circle (or whatever color that is) and there are some HD activity , but that's all. Vista (and the PC itself) was working fine up until this point.

  Hi Casey785,

  Welcome to the Microsoft answers site.

  Step 1: Run (Checksur.exe) system update readiness tool

  Download and run (Checksur.exe) system update readiness tool. After downloading this tool, it runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  For more information about how to download and run the system update readiness tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821 Description of the system update tool for Windows Vista and Windows Server 2008: http://support.microsoft.com/kb/947821

  Article 947821, scroll down to the "Microsoft Download Center" section and then click on the link to download the update for your operating system preparation tool

  Step 2: Reset the Windows Update components

  You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link:

  How to reset the Windows Update components? : http://support.microsoft.com/kb/971058

  These steps should solve the problem, give it a try and check if you are able to perform windows updates.

  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• computer does not work properly after the update, because the screen is black.

  Advice please! :-(

  After an update there about 2 months, my computer has never worked properly after that I turned it back. My windows start page is longer there. My screen is black. The words are only in white and fluorescent yellow...

  The only way I can go online to find Norton (is always at the bottom of the black screen) and go to help. I can get a search bar like that. Almost as if this black screen hides everything below.  Computer is 13 months old.

  My internet provider says it isn't them. Gateway said it's not my computer so idk what happened after this update.

  Any advice would be so appreciated.

  Thank you.

  Hi Patty,.

  Welcome to the Microsoft community. I would be grateful if you can answer these questions.

  1. You have installed the latest drivers for Windows 8?
  2. What is the model number for Gateway computer?

  If you get a black screen after upgrade to Windows 8, it might be due to an outdated or incompatible graphics card driver. Update to the latest version of the display driver should fix this.

  Try to remove all external devices connected to the computer and then try to start the computer and check if it works. Follow these methods and check if that helps:

  Method 1: To resolve this problem, update the Gateway website. video card driver

  Step 1: Check out these Microsoft items for additional reference:

  Download and install the drivers

  http://Windows.Microsoft.com/en-in/Windows-8/all-drivers

  Step 2: If you are not able to find drivers for Windows 8 to HP support. Try to install the graphics drivers in compatibility mode and check:

  Download your applications and devices in Windows 8.1

  http://Windows.Microsoft.com/en-in/Windows-8/get-apps-devices-working

  If the problem persists, proceed to the next method.

  Method 2: I suggest to follow the suggestions provided in this Microsoft KB article and check if this can help:

  Windows 8 starts with a blank screen after a standard or hibernation

  http://support.Microsoft.com/kb/2756559/en-us

  See also the suggestion provided by Scott (owner of Forum) from this thread and check if this may help.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• PP 2015.3 Edit to tape function suddenly not working properly after the update

  I have maybe in a small percentage. I have grown to love PP and have been using it for controlling certain emissions tape HDSR. I think I went from 2015.0 a.3. The reading seems to have suffered in this update. I get now loss of images of PP did not keep in touch with the reading. So put together it on tape fails and insertion don't will go not to the point where there was a framework has fallen.

  There are a few other issues that are easy to manage, but tried to go through telephone support on this issue.

  -Insert video or audio over half the time after insertion is finished, PP gets stuck. The Strip was inserted but the glass remains and to pass to the next punch that I have to cancel the dialog box.

  -PP will are not more than 8 channels of audio. -Final Cut 7 can arm all12, available on our SONY SRW-5800.

  -After the 2015.3 update the PP would go through the motions of insertion on the Strip, but it would not actually insert audio, so if I was not paying attention you'd think they had set just a note QC. But no! PP just doesn't work. This problem has been resolved by removing the preference PP folder in My Documents on Mac OS X.

  So my main problem still remains that reading is basic and is no longer usable for laybacks professional Ribbon. I had to go back to Final Cut 7 and snap a simple 422HQ to tape. There must be something that I am missing, but the time allotted to me to troubleshoot this with time etc etc is limited. What could have changed in the update for the functions to change the band which makes it unusable now?

  I want to really just to install the old version, but phone support wasn't helping me with that and said I couldn't.

  Mac Pro 5.1 12 Core

  OS X 10.10.5

  32 GB OF RAM

  NVIDIA GTX980

  PP 2015.3

  Black Magic Decklink Extreme 3D +.

  Video Fund 10.6.2

  Tape recorder plugged with cable RS - 232 9-pin

  Adobe must have heard our complaints.  The new update of PP 2015.4 seems to have resolved most of the questions that we take.  I always have a random frame dropped here and there.  Export to tape option is viable again in PP 2015.4.  I'm under PP 2015.4 with the latest drivers from the AJA.

• HP Deskjet 3520: 10 Windows will not let me block the update "ghost".

  I am running in the same question as 'has no updates nightly for Hewlett Packard Imaging NULL print HP Photosmart 6520 series' and 'I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop Window 7 error 80070490 o/s", when I run windows updates I get the message

  "He had problems installing the updates, but we will try again later. "If you keep seeing this and you want to perform an Internet search or contact support for further information, this can help: Hewlett-Packard - imagery - print Null - series HP Deskjet 3520 - error 08024200 b ×".

  The solution to both of these post say is to disable the update is not tried to be applied, however, I use Windows 10 and it seems to be an option to ignore an update than previous versions of windows.

  What are 10 Windows users supposed to do when they are run this problem?

  Hello:

  As you know, Windows 10 has made it impossible to hide or ignore updates (or so it seems).

  I found this tool from Microsoft that allows you to hide updates that don't work, or mess up your PC if they work, (as a synaptics touchpad update has done on my laptop).

  https://support.Microsoft.com/en-us/KB/3073930

  I saved this tool on my PC for use in the future if necessary.