Blank application diagnosis responsibility problem

Similar Questions

• Internet Explorer cannot display the Web page: diagnose says: problem with winsock provider catalog

  I am unable to access any internet site. I get a page that says Internet Explorer can not display the webpage with an option to diagnose connection problems button. When I run that a window is titled "for windows XP Network Diagnostics. He says that windows has detected a problem with the winsock provider catalog on this computer. It offers to reset the catalog to the default configuration and restart. When I do this it does not correct the problem. What other +.

  Hello verncan,

  Since you are getting the error Windows has detected a problem with the catalogue of the Winsock provider on your computer, follow the instructions below to reset the Winsock.
  Click on "Start" and type "CMD" in the search box. Press the 'Ctrl', 'Shift', and 'Enter' keys simultaneously. This action opens a Windows command with administrative privileges prompt.
  Click 'Yes' to dialogue permission screen and opens the Windows command prompt. You should also see 'Administrator' at the top of the window.
  Type "netsh winsock reset" next "C:\Windows\System32" and press the Enter"" key.
  Restart your computer after you see the message "Winsock catalog reset successfully."

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have been connected to the internet (wireless), then I unplugged the router and now I can not connect to internet. I tried diagnose the problem, but he said that he could not.

  I have a wireless internet connection for my laptop. I was connected to the internet, and it worked very well, so I had to unplug my router and all of a sudden I can't connect to the internet more. When I open the available networks, I hit connect on mine and he said: it does not work then I hit "diagnose the problem" and then, he says he can't. Also it is not even give me the option to set my password to connect to my network, but it does when I try to connect to any other.

  I suggest to unplug all your network cables and unplug the adapter from your modem AND router. ONLY plug your modem back power adapter in. Wait until you get a steady green light on your router, which indicates that it is ready. Then, connect the ethernet cable from your modem to your router INTERNET port. Connect the ethernet cable from your computer to any other ETHERNET port on your router. Finally turn the monitor for your router.

  If you do not do so in this order, the router can not connect properly to the internet because it doesn't have the correct IP address of your modem.

• Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem?

  Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem? Sometimes when I play a video game in the steam.

  Windows 7

  64 bit

  HP e9300z

  Processor: AMD Athlon II processor 4 620 X 2.60 Ghz

  RAM: 4 GB

  Graphics card: NVIDIA GeForce GT 220

  It does not give me an error message simply stops and restarts auto.

  When it reboots it just tells me that Windows has stopped unexpectedly.

  First - check that you have the latest drivers for your motherboard chipset, your video device, your audio device and your network devices.  The first place to look for those who are on the Web site for your computer model & specific brand:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4148392&LC=en&cc=us&DLC=en&lang=en&cc=us

  When you select your operating system (Windows 7 64-bit) I see that HP ony supplies those who they provided with the system originally.  It's practically worthless.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4148392#n177

  Yes, where to from here?  I would say that you should at least install the latest video card driver - as more modern games can use those strongly...

  http://www.nvidia.com/object/Win7-WinVista-64bit-301.42-WHQL-driver.html

  Download and install it.  If possible, you still have the original driver installed - this is more recent than most 30 months.

  It's an AMD 785 G chipset card mother configuration, if their site is correct.  Looks like you can download and install latest drivers from AMD for this also:

  http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx

  I'd say it's a good start.

  What else?  It could very well be a heat problem.  Since it is a desktop - I suggest she get everything, buy some canned air for cleaning electronices and opening of this case and blow off any dust.  It can be quite the accumulation.  After blowing out, make sure that all the components that look like they 'plug' firmly/well connected.  Carefully.  Then, put the cover on and connect.

  Make sure that there is enough air around the case - put a fan in front of him if you have to.

• tool to diagnose performance problems in the oracle database

  Is there a tool to diagnose performance problems in queries and stored procedures in oracle similar to sql for sql server Profiler
  
  Thank you

  You can use oem oracle enterprise manager to diagnose and monitor the database.

  Chapter 10: Monitoring and Tuning of the database (see the link oracle obe series, procedures step by step with the presentation of the screenshot)
  This chapter shows you some of the monitoring and tuning of the operations performed by Enterprise Manager.
  http://www.Oracle.com/technology/OBE/2day_dba/monitoring/monitoring.htm

  Reference: monitoring and Tuning of the database

  http://download.Oracle.com/docs/CD/B14117_01/server.101/b10742/montune.htm

  hope this helps you.

  Published by: rajeysh on July 14, 2010 21:28

• Authorware Application in CDs - problem

  Hello
  Can I know if someone out there have this problem before?
  I have an Authorware application that uses the CallSprite - browser feature. I use this to display a MS Word document in the application window. It works very well - can access the file and displayed in the same application window: no problem. However, when I tried to burn this application and all the associated files in a CD, the application will encounter an error saying that it cannot find the .doc file! When he can do so perfectly well if the application is in the hard drive. Can you help me? Below s my codes:
  
  testFile: = FileLocation ^ 'Content//myfile.doc '.
  CallSprite (@"browserMyfile", #Navigate, testfile, 0, 0, 0, 0)
  
  Content directory resides in the same directory as the packaged authorware (exe) application.
  
  Thanks for help.
  
  Rgds
  MeiLian
  
  
  

  should not return reduced to the local file system?

  testFile: = FileLocation ^ 'Content\\myfile.doc '.

  Mark

  MeiLian wrote:
  > Hi
  > May I don't know if anyone out there have this problem before?
  > I have an Authorware application that uses the CallSprite - browser feature.
  > I use it to display a MS Word document in the application window. It works
  > thin - can access the file and displayed in the same window of application: no
  > problem. However, when I tried to burn this application and all the
  > files on a CD, the application will encounter an error saying that it cannot find
  > the .doc file! When he can do so perfectly well if the application resides
  > in the hard drive. Can you help me? Below s my codes:
  >
  > testFile: = FileLocation ^ 'Content//myfile.doc '.
  > CallSprite(@"browserMyfile", #Navigate,testfile, 0, 0, 0, 0)
  >
  > Content directory resides in the same directory that the authorware packaged
  > application (exe).
  >
  > Thanks for the help.
  >
  > Rgds
  > MeiLian
  >
  >
  >
  >

  --
  ------------------------------------------------------

  www.AuthorwareXtras.co.uk

  EuroTAAC eLearning 2007
  www.eurotaac.com

  www.freelists.org/List/flashelearning

  Multimedia synchronization command Authorware:
  www.authorwarextras.co.UK--> orders

  Synchronization of media with ease!

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• We have 2 people sharing account iCloud... added a new application that poses problems for iPhones. Can I separate and give each phone its own iCloud account?

  Problems after installing an application on two phones with a shared I have cloud account. One phone receives calls. Remove the application on the phone in question but continued to receive calls. should I individual iCloud account to resolve this problem. The app is text & Talk for private plane wifi messaging and talk.

  Ideally boards should not share accounts iCloud

  However - that said if interchanging receiving calls is the only question

  Settings - Phone - calls on other devices - OFF toggle

• By clicking several times for switching Applications and other problems of Click

  I would like to know when it started, because then maybe I could narrow it down. I have actually some problems, but I strongly suspect that they are related. I do not think that this started immediately when I upgraded to El Capitan, but I can't say when it started.

  1. If I Mail to Safari and I click on Safari to bring it forward, nothing happens. If I click a second time, then Safari comes forward. The problem is not limited to these two requests. Maps, Finder, TextEdit and others do, but it doesn't happen in all cases. For example, if I click on a TextEdit window it before now, but if TextEdit is in front, the other application is not until the second click.

  2. If I double-click a file or application in the Finder, it tries to open the point three times. This usually results in two dialog boxes telling me that the application cannot be opened because the third opens.

  3. I have my user folder and disk in my dock to quickly navigate to a specific folder using the grid. However, when I click on an item in the grid, the icon blinks but nothing happens and the view disappears, won't let me choose something or drilling to the location I wanted.

  What I tried

  A different user account - another user account, all right. It tells me that the problem is at my user account level and not at the level of the system. It's good, almost.

  Connection with the elements of wide opening (SHIFT key is pressed) - This resulted in no change in the above problems.

  Watch the Console - I ran the Console to see if all the messages when problems occurred. Zip fastening. Zilch. Nada.

  What I think

  I am sure that this is a problem with an article by third party due to the fact that it happens to other users on the same computer, but since this is not an element of connection, so I'm stumped on how to refine the problem down to find the cause.

  Does anyone have any suggestions?

  Okay i ' l jump to... Maybe you're more think it is a little. Have you tried another mouse or trackpad, then a reboot before going too far into other possible problems?

• Loading in click - once the Application OR assembly problems

  I created an application to measure the current consumption of a device in Visual Studio 2012. I built a library for the National Instruments USB-6008 and added the dll from C:\Program Files (x 86) \National Instruments\MeasurementStudioVS2012\DotNET\Assemblies\Current, which is 9.9. Everything went well on my dev machine, so I pushed all the changes on the production server, which is packaged as a click - once the app.

  On the machine running the real click - once the application, I downloaded and installed the fir driver 9.9 from here: http://www.ni.com/download/ni-daqmx-9.9/4707/en/. When the request arrives at the point where it measures the current consumption, I get the error:

  System.BadImageFormatException: Could not load file or assembly 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4' or one of its dependencies. An attempt was made to load a program with an incorrect format.
  File name: 'NationalInstruments.DAQmx, Version=9.9.45.39, Culture=neutral, PublicKeyToken=4febd62461bf11a4'
  

  What I am doing wrong?

  The solution I found to this problem is to install the samples for Measurement Studio. Don't know why it has to be installed on the computer that runs the Clickk - once the App if.

• Shift of the computer; It seems that my laptop is lagging when it is connected to the power supply (AC adapter) and it works perfectly fine when it is NOT connected to the power adapter. Can someone help or diagnose the problem?

  This shift of computer thing had never happened before until about a week ago. The shift comes every 30 seconds or more and it occurs also when I switch between applications.

  Hello

  I saw this kinds of problems occur with the power strips and even UPS systems. And some similar questions have
  been solved using them actually, especially the UPS. If the power strip has important circuit protection
  He'll probably bad or you have very low power at first on this AC circuit.

  Solution is not to use the tape and maybe get a UPS with brown-out solution.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• BES 4.1.7 OTA application WebWorks - camera problem

  We build a webworks application, using sdk webworks 2.3.1 for OS smartphone devices.

  If we push the application manually in a dev machine to the phone via a usb cable, we are able to take photos and the photo stream app.  Our problem is that if deploy us the application on a server bes on a DIRECT phone, we cannot use the camera (nothing happens - the camera app is not open)

  Usually, when manually push us to a phone which we are presented with a dialog box advanced to allow the camera to be used by the application permissions, this happens when it is deployed using bes.  This suggests it might be a problem with the it policy, everyone had a similar problem and found a solution?

  Problem solved.

  In order for the camera to work from our application, we need set the event Injection allowed in default of the Application control policies.

• Application set permission problem

  Hai

  I have some access denied problems while using my phone app Blackberry "BOLD" (ControlledAccessException survey).

  But the curve phones not show this problem.

  (Only "BOLD" blakberry real phones have this problem. Simulator "BOLD" has not seen any problems when executing the application)

  Think this is because calling the methods in CodeModuleManager class. The error is "net.rim.device.api.system.controlledaccessexception'. '"

  Another question is, I tried to put the permission to the eclipse, but the option list does not appear... its just empty

  In the eclip [to Blackberry - > configure blackberry Workspace - > Code signing.] Here the list to allow access to the API that require the following keys.

  But there is no option list, in the eclipse, its just empty. I use the Vista operating system . I also tried access setting in the phone, I turned it all allow "options-> options-> applications advance." It helped me not.

  . In the current device by using this application, we cannot say give them any permission in the phone. I need to solve this problem by programming.

  Please help me solve this problem

  Thanks and greetings

  Joe

  Hi all

  Thank you for your support. It is resolved. Apprweciated your help.

  Thanks and greetings

  Joe

• While the application signature Tablet problem!

  Hello my dear,

  I have the same problem, as in this post except the java exception is different, it is NullPointerException, I added the java jdk / jre for the environment variable, but I got the same error that is:

  {

  c:\>javac-version

  javac 1.7.0_09

  C:\Program Files (x 86) c:\>CD tab \Research In Motion\BlackBerry WebWorks SDK
  letOS 2.2.0.5\bbwp

  C:\Program Files (x 86) \Research Motion\BlackBerry Development Kit SDK for Tablet 2 WebWorks
  .2.0.5\bbwp>bbwp C:\myapp\keepsmiling.zip g yamosahel - buildId 1 o C:\myapp\ou
  tput
  [INFO] Parsing of the command line options
  [INFO] Bbwp.properties analysis
  [INFO] Validation of archive WebWorks
  [INFO] The analysis of config.xml
  [INFO] The application of filling source
  [INFO] Compiling applications WebWorks
  Error loading: C:\Program Files (x 86) \Research In Motion\BlackBerry WebWorks SDK
  for Tablet 2.2.0.5\jre\bin\client\jvm.dll
  [INFO] Packaging of the record bar
  Exception in thread "main" java.lang.NullPointerException
  at java.util.PropertyResourceBundle.handleGetObject (unknown Source)
  at java.util.ResourceBundle.getObject (unknown Source)
  at java.util.ResourceBundle.getString (unknown Source)
  at net.rim.tumbler.log.Logger.logMessage(Logger.java:38)
  at net.rim.tumbler.WidgetPackager.go(WidgetPackager.java:213)
  at net.rim.tumbler.WidgetPackager.main(WidgetPackager.java:77)

  }

  This killed me for a bit so 18 months ago

  Try this...

  Open Windows Explorer (NOT Internet Explorer)

  Right click on 'my computer '.

  Click on "advanced system settings".

  Click on the button "Variables according to" @ bottom

  In the lower window (System Variables) scroll way then double click on it

  You can now change the system path

  In my case, I added...

  ; C:\Program Files (x86)\Java\jdk1.7.0_09\bin

  Notice the semicolon at the beginning of this type: it is very important

  You must keep the path correct since new versions of Java is

  OK-a restart is always a good idea when you do this kinda thing

  All this is saying the command prompt where JAVA

  It seems that JAVA do not know where he lives it needs to get its DLLs

  If this does not kill Java (remove) and retrieve the Java SDK and install - I see that we are (now up to 10 v so path will defo need to change)

  Make sure you get rather than JRE SDK and make sure that it is the 32-bit version (x 86)

  I recently rebuilt my laptop cos Win8 live with what I did a clean install on 7 just over a week - could not sign - could not install the keys (frustrating damned)

  I can tell you with certainty that this thing works as I can install the keys and sign again now

  Like other notes poster check you have AIR