blank resource visa info during the first round

Hi all

I am trying to run the pilot of 6100 fluke on a fluke remote 6100.  When I run the initialization of the remote device, I always get the following error message:

VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

I followed the problem and saw that the visa being passed resource name contains no valid information (see below).  That is not sensible, since when I select the name of the resource from the drop-down list, the program has clearly recognized the remote device.  Why the program allow the user to select the resource of visa but won't visa valid for driver information?

This error occur only during the first inning.  If the user run the program again, the error disappears.  Can anyone help?  Thank you!

Yik

When the program is run for the first time, visa name contains valid information:

General

The resource name of the canonical VISA = blank

Visa refnum = white

Session ID = 0

I/O timeout = 0

Type = 0 INTF

Value = empty

Stop? = True

Condition

session valid? Fake

Instr is? = False

Stop? True

AHA!

You select the resource from the drop-down list BEFORE the start of the loop?  An SR might help

Tags: NI Hardware

Similar Questions

  • void / buttons vi of the single of structure event during the first round.

    I have a project that contains separate programs. In the past (for 15 years), I develop a 'main Menu' which uses a structure of producer-consumer (events). The user selects "Program 1" says event loop of consumer to open "program 1". Program one opens, running tests, exit button returns the user to the main Menu. All programs are maximized, open front audio, closed when finished, etc.

    It is the first project that I did in LV 2013 as it and now it does not work. If I go back to the main Menu and reinstate the program 1, none of the operator buttons don't market, which are supported in a loop of event also structure/consumer.

    No variable is passed to and from the main Menu. Each separate program uses the structure of consumption of the producer with an additional of 10 ms loop that reads/writes on DAQmx tasks. All tasks are closed and removed to exist, the queues are closed.

    I'll continue searching for a solution in the discussion forums and knowledge base but if someone sees what I'm doing wrong, please let me know!

    Thank you.

    I put this little sequence before I call the initialization block and now it works... Usually I initialize my variables in the block of initialization, but for some reason that this program doesn't. My producer loop check for "first time" so that they do not give up so I don't know why it has to be added.

    Seems to work but I'm going to run the whole project a couple of times to make sure.

  • [Solved] [Ubuntu] Player Modules compilation fails during the first round

    Environment:

    Ubuntu Server 15.04

    VMware-Player - 7.1.0 - 2496824.x86_64.bundle


    Hello

    The update of the kernel module fails to build vmnet:

    2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Extract successfully the vmnet source.

    2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-Hx4jdX/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.19.0-16-generic/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".

    2015 05-08 T 11: 55:18.894 + 02:00 | vthread-4 | W110: Vmnet failed.  Cannot run the command build.


    No more description of the error is available in the newspaper which is attached below.


    Any suggestion?

    Reader 7.10 and Workstation 11.10 are incompatible with the kernel linux 3.19.

    The solution is documented here.

    Successfully, I applied the patch on /usr/lib/vmware/modules/source/vmnet.tar on Ubuntu Server 15.04.

  • Satellite L500-1ZR - battery died during the first installation

    Hello

    I really hope someone can help me.

    During the first time I started my new Toshiba Satellite L500-1ZR battery died and my laptop turns off. I was in the middle of the installation and now when I start it, it gives a word of warning: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation. "However, when I click OK it restarts and I find myself the exact same caveat. I tried F2 and F12 to see if he had options to do a startup repair and also I inserted a disc on which I downloaded a hardware configuration, but it won't work.

    Anyone got some ideas on how to solve this problem?

    Thanks in advance.

    Hi belisu,

    The advanced boot menu, you can access via the F8 key before Windows starts.
    With the F2 and F12 button, you can access the BIOS menu and start.

    So try to use the F8 key to access the Windows Advanced Boot menu and try to start the Windows repair option. It starts from Toshiba HARD drive recovery and restore settings factory.

    Good luck! :)

  • Other results: preliminary report does not properly during the first run in a loop

    I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

    Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

    If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

    The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

    You can see this described as stage 15 in the following link:

    http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

    Kind regards

  • My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

    My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

    You can also make reference to: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

  • I want to cancel my plan during the first month. How do I?

    I want to cancel my plan during the first month. How do I?

    Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
    Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

    Creative cloud support (all creative cloud customer service problems)
    http://helpx.Adobe.com/x-productkb/global/service-CCM.html

  • Satellite A100 - messages of weird info during the recovery process

    This is the first time I tried to recover my Vista PC from Toshiba.

    During the recovery, I got this in CMD

    "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
    "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

    (1) is this normal?
    (2) what it means?
    (3) I even did a FULL format?

    Thanks a lot guys

    Hello

    During the recovery process, you will see some messages, that's nothing unusual
    Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
    Wait a bit and see if the procedure would end...

    If the procedure to hang himself, then start recovery and boot from the disc reocvery...

  • BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

    During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

    Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

    I'm not an irritable person, so any help would be appreciated.

    Thank you!!!

    Never disconnect during an update. Never.

    This is therefore a new phone, follow the instructions below.

    First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

    First find your operator and the system operating file that you want to use.
    http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

    Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

    1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
    2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
    3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  • 10 free of charge during the first year Windows update - include Windows XP and Vista?

    Hello

    I read in the press last week that Microsoft will offer a free upgrade of Windows 10 for users of Windows 7 and 8 for a period of one year after its initial launch.  My question is Microsoft will expand the offering to users of Windows XP and Vista?

    As long as the material can cope with the new operating system - and it seems to be able to scale up to a certain extent - surely, it would be more beneficial to all parties that as many possible Windows users get the new standard rather than race systems not supported / dangerous or ineffective.

    I know several users who are quite happy with their existing equipment, but are showing more concern with the lack of support from their systems and they cannot afford to upgrade their hardware right now.  There are also many companies who do not want the additional costs of purchasing new computers if its computers are fit - for-purpose (except for the lack of OS support...).

    If the grand design is to get Windows facilities as 10 in the first year, then it would seem preferable to offer either to these users:

    (a) a free upgrade like any other Windows user

    (b) a small fee upgrade - say £10 - get to 10 Windows

    Concerning

    Nick Anderton

    Hello

    I read in the press last week that Microsoft will offer a free upgrade of Windows 10 for users of Windows 7 and 8 for a period of one year after its initial launch.  My question is Microsoft will expand the offering to users of Windows XP and Vista?

    Right now, this offer is only available for Windows 8/8.1 and Windows 7 users, but if you migrate your installation of Windows XP now to preview Windows 10, you will receive the promotion.

    As long as the material can cope with the new operating system - and it seems to be able to scale up to a certain extent - surely, it would be more beneficial to all parties that as many possible Windows users get the new standard rather than race systems not supported / dangerous or ineffective.

    I know several users who are quite happy with their existing equipment, but are showing more concern with the lack of support from their systems and they cannot afford to upgrade their hardware right now.  There are also many companies who do not want the additional costs of purchasing new computers if its computers are fit - for-purpose (except for the lack of OS support...).

    If the grand design is to get Windows facilities as 10 in the first year, then it would seem preferable to offer either to these users:

    (a) a free upgrade like any other Windows user

    (b) a small fee upgrade - say £10 - get to 10 Windows

    Concerning

    Nick Anderton

  • Simulation of phone call throws the null pointer exception in the first round

    I am trying to simulate a telephone call, but he throws null pointer exception in the first race after that the Simulator is launched. It works very well in subsequent executions. This is the scenario in single line and multi mode. I was able to test this on a camera right now.

    Can anyone guide me as to why this exception occurs? And how to solve?

    The code I used is:

    Single line

    PhoneArguments

    Call = new PhoneArguments(PhoneArguments.ARG_CALL, )

     

    Phone_Number);

     

    Invoke.invokeApplication (Invoke.

     

    APP_TYPE_PHONE

    Call);

     

     

     

    MultiLine:

     

     

    Phone.initiateCall (Phone.getLineIds () [0], Phone_Number)

     

     

     

    Thank you

     

     

    This null pointer exception will not come to the real device...

    According to my knowledge, you call another application so that the user must press the back button to return to your application.

  • Several select Insert null during the first

    Hello

    Using jdeveloper 11.1.2.4.0.

    I used the code below

    < af:selectManyCheckbox autoSubmit = "true" binding = "#{checklistbean.dentalListBinding}" id = 'smc1' "

    value = "#{checklistbean.dentalCategory}" >

    < f: selectItems id = "si1" value = "#{bindings." DntlCondSeqNum.items} "/ >"

    < / af:selectManyCheckbox >

    while I run my jspx the first page checkbox is not any value. I need to remove the first box

    RemoveCheck.png

    The empty box comes from the list of data deflector the selectItems.

    If the list is linked to a vo, you can set the list does not contain an empty element for the suspicion of the user interface for the attribute tab.

    Timo

  • If I did sign up for 10 free images and download 8 images and then cancel during the first month, can specify you what would be the cost? w

    If I sign u, download 8 images but subsequently cancel the membership in the first month.

    can clarify you what the cost would be, thanks

    Hello

    If you subscribe to the offer of 10 images/month promo you will be charged the price displayed and then receive a refund for that amount.

    If you cancel within the 1st month then there will be no other load.

    Link to the promo - Royalty free images, pictures and graphics. Adobe Stock

    Thank you

    Bev

  • Is it safe change a resource of media outside the first file?

    Suppose I have a calendar containing a foo.wav file.  I edit this file and save it with the same name.  When the first load this project will work right, or do I have to clear out caches or save it under these provisions advance, or anything else I should know?

    It should work fine.

    Do a test with a dummy file.

    BTW - I do that all the time with Photoshop files.  Change the original and the first project just updated on registration of the psd.

  • Error: "there was a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres" during the installation of Dungeon Siege.

    When I try to install it it comes up with an error about 16% in the installation, saying that there is a disk error when you write to the file C\:Program files (x 86) \microsoft games\dungeon siege\resources\objects.dsres

    Any ideas?

    Hi MouseToe,

    What version of Dungeon Siege you trying to install?

    The cause of this problem could be the corrupted resource (.dsres) file or disk error. Here are some things you can do to solve the problem.

    Method 1: Run the disk check.

     

    Check the integrity of your hard disk for lost clusters and errors.

    To do this, follow the steps in this article: check a drive for errors

    Method 2: Defragment the hard disk.

    This improves the performance of your hard drive.

    Reference: improve performance by defragmenting your hard drive

    Method 3: Run the game as administrator.

    Here's how:

    (a) right click on the game configuration file.

    (b) choose 'Run as administrator'.

    Method 4: Try to install the game in a different folder or to a different drive

     

    Try to install the game in a different folder. If the computer has another hard disk, try to install the game on the other hard drive.

    Follow these steps.

    a. Insert the game disc in the drive.

    Note: Do not click on Quick Installation during installation.

    b. follow the setting menus until you see the change button.

    c. click change.

    d. in the path box, delete the existing path, and then type the following text:

    drive: \Program Files\Microsoftgame name Games\

    In this example,drive is the letter of the hard disk drive and the name of the game is the name of the game you are trying to install.

    e. click OK when finished.

    f. follow the instructions that appear on the screen to install the game.

    This should be it.

    For more information, please visit:

    http://support.Microsoft.com/dungeonsiegeiifaq

    For additional assistance, please post your concerns at the forum below.

    http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for