Blank screen, no beeps or error codes.

HI I have a HP 2000 nopebook PC and its gives me a black screen no beeps or error codes. I can hear the sounds of start-up and see the screen illuminates upward and then darkens. When I plug in an external moniter happens.  I tested the memory, the inverter, I tried to drain the battery and even tried to update the graphics card and still nothing.

Help, please!

Yes! You are right. The laptop did work normal without any problems, but your laptop screen has gone bad and needs a replacement. HP will provide a screen for your laptop of replacement if warranty is active, you can check your warranty here to check the status

Hope this helps, for other queries in response to the post and feel free to join us again

* Click on the star of CONGRATULATIONS on the left to say thank you *.

Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

Thank you

K N R K

Although I am an employee of HP, I speak for myself and not for HP

Tags: Notebooks

Similar Questions

  • I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

    I play an online game called Last Chaos, and whenever I try to run the launcher I get a message on the screen that shows the error code 626. How can I fix this so I can play my game?

    Hi Kerrkid90,

    Welcome to the Microsoft Answers Community Forum site!

    To launch the browser, I want to suggest you to log on as an administrator in 1. Download the game

    2. run the setup.exe file

    3. right-click on it and run as administrator.

    If it fails, suggest to run the Windows Installer Cleanup utility by visiting the following link:

    http://support.Microsoft.com/kb/290301

    In the case if the above methods fail, you can also contact last chaos community to help you fix this problem:

    http://forums.aeriagames.com/?f=6

    I hope this helps!

    Thank you best regards &,.

    Calogero - Microsoft technical support.
    Visit our Microsoft answers feedback Forum
    http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  • HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    Hello

    Please do not type in capital letters because it's difficult to read and considered to be shouting.

    ---------------------------------------------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • When you try to run Netflix full screen, I get this error code 8307.

    I can run netflix on my tv and a computer running xp home does not work on my xp pro computer, all systems share the same network. Flix NET will load (red screen) asw soon as it gets to 100%, it displays error code 8307, no connectivity .i don't have deleted silverlite, reloaded, really different versions, ran across patches netflixes what is called nothing to no availe, tried on ie and firefox. I've isolated as there is a conflict between xppro and netflix, but no one seems to understand what it is

    original title: netflix xppro conflict

    Read the responses posted here:

    "Internet connection - error Code problem: N8307.
    http://developer.Netflix.com/Forum/read/120965

  • Error messgae: "the screen saver cannot run because it requires a more recent video card", attempting to display the screen saver and the error code 40 download the fix.

    Original title: cannot run zip; error code 40 (hotfix for the video card)

    Hi, I ' m trying to view my screen saver and it seems to be causing "the screen saver can't run because it requires a newer video card or compatible with 3d graphics." (2030 M-windows7 dell) .thanks Jean-Michel

    Hi John,.

    1. what screen saver are you trying to view?

    2 is confined to a specific screen saver?

    3. have you installed SP1 for Windows 7?

    This problem occurs because of a problem in 3D screensavers.

    Fix error occurs if you have a corrupt hotfix package or may have downloaded the wrong patch for your platform.

    This can also occur if the hotfix is included in SP1 and you have already installed Windows 7 SP1.

    Method 1:

    You must make sure that the hotfix you download is depending on the version of Windows 7 installed on your computer.

    For more information, see the article:

    Error message when you set a 3D screen saver screen saver in Windows 7 or in Windows Server 2008 R2: "the screen saver can't run because it requires a more recent or Direct3D-compatible video card.

    Please see if you can copy the file that you downloaded to another computer or location and try to unpack.

    When you download the fix, save it in a new location (on the desktop) and the password given with the fix allows to extract the file.

    Method 2:

    Step 1:

    You can also try to run the display quality Troubleshooter and check if it helps.

    Step 2:

    You too, try to install the latest version of the Site Web of Dell display drivers and check if it helps.

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Blue screen with the 0xc000007b error code.

    Original title: installation of WIndows 8 (BSOD) issues

    Photo of error code:

    https://SkyDrive.live.com/redir?RESID=3EF5647F35E62E6E! 3019

    Using the EFI install Windows 8

    1 disc ssd of TPG

    Drive HARD 2 MBR disk

    Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:

    Silakan is bahasa Anda dari daftar dropdown di wanted menulis pertanyaan Anda dalam bahasa pilihan Anda untuk bagian bawah. Yang diposting di adalah bahasa Inggris untuk Anda Forum. Jika Anda tidak menemukan bahasa yang diinginkan above, supports opsi untuk tambahan international ditemukan dengan mengikuti link di bawah ini dapat map:

    http://support.Microsoft.com/common/international.aspx

  • E mail response freezes screen, flashing tools (no error code) said plugin toolbar will work in 32-bit mode

    installed version 20.0 have but still same problem, rebooted in safe mode, but even still have problem.

    Some plugins only work in 32-bit mode.

    You can use these steps to start Firefox in 32-bit mode:

    1. Closing of Firefox
    2. Launch the Finder and open the Applications folder
    3. Make a right click or Ctrl-click the icon of Firefox.app
    4. Select "Get Info."
    5. Select or deselect the option "open in 32-bit mode".
    6. Close window 'Firefox Info' # restart Firefox
  • HP T520: Screen blue T520 with error code 805D 0070

    Anyone know what it is?  It rises almost immediately when the printer power is on and there is no way around it.

    Hello

    Try to remove the ink cartridges, print head, paper, replace the power supply cable and another outlet. If you still have problem, please replace the hand of APC (P/N: CQ890-67097)

    PartSurfer: http://partsurfer.hp.com/Search.aspx?SearchText=CQ890-67081

    N.B: Réf. CQ890-67081 is an older revision.

    Thank you
    Rashed

    I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.

    If your problem is resolved please click the button "accept as a Solution.

    If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

  • BLUE SCREEN of DEATH error CODE * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4)

    I just tried to turn on my computer and I got the black screen that gives you the choice to start in Windows XP or the Recovery Console, and when I click Start in Windows, it loads and then I get a quick death blue screen displays a down error code, and the computer restarts automatically. When I disable automatic reboot in the advanced options I get the blue screen showing this code: * STOP: 0X0000007E (0XC0000005, 0X8050D532, 0XF78A23B8, 0XF78A20B4) I tried this code on Google and got no results. I'm sure that I don't not miscopy, I checked several times.  I tried to start in safe mode, but then I get a black screen with many codes (w-a-a-a-a-y-y-y a lot to copy down) and the computer restarts. Someone knows what to do? I have a lot of important files out there that I just can't lose. Thank you! Any help or advice is appreciated.

    Alex

    While this error can be caused by malware infection, it's commonly found when the RAM failed. In all cases, you want to go down the data files before you do anything else. Do this with one of the following methods:

    1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

    2. you can start the target computer with a Bart PE (if you use XP) or a Linux live CD like Knoppix and retrieve the data in this way. General information about the use of Knoppix for this are:

    You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with sufficient capacity to store your data, OR an external hard drive formatted USB FAT32 (not NTFS) *. Download Knoppix .iso image file and create your bootable CD. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or the free ImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created, and Knoppix will be able to see the files in Windows. If you use the USB key or an external hard disk, right-click on its icon (on the desktop) to get its properties and uncheck "read only". Then click on it to open it. Note that the mouse action by default in the window manager used by Knoppix (KDE) is a simple click to open instead of double-click traditional MS Windows. If you want to burn CD/DVDs, use the K3b program.

    * My understanding is that you can now write on NTFS from Linux partition. If you wish to do this, Google for instructions on the use of the NTFS driver.

    http://www.Knoppix.NET
    http://www.nu2.nu/pebuilder/ - Bart PE Builder

    When you have your data safely, get hardware troubleshooting with the RAM before reinstalling Windows. There is no point in trying to install Windows if your material is not good.

    http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows

    And for future disaster recovery programs:

    http://www.elephantboycomputers.com/page2.html#Backing_Up

    If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad). MS - MVP - Elephant Boy computers - don't panic!

  • VPCF-22SFX recovery error code: 385

    The disk of 5 against 5, towards the end of the part of the copy of the file, an error screen appears with the error Code: 385. "An error occurred during the execution of an application."

    I had cleaned up my drive, so there is no recovery partition, only the recovery disks. The discs are fine and I see that some of the files have been copied no disc 5.

    What is this error? How to get around? What is sanitation?

    I received the new recovery media. Installed a system of fees, new recreated recovery media. The newly generated recovery support properly installed. There was obviously a flaw in the installed system software which prevented the accurate recovery media must be created. I appreciate the quick response of the Sony Advanced Client answer to this team and make it right.

    My recommendation, always make a copy of the master boot record partition and partitions 1 and 2 so they can be restored on a new drive, if need be, and recovery media is not practical or useful.

  • New Photosmart C8180 displays error code C2FF8575 out of the box.

    I bought a Photosmart C8180 a few years back but put away in a closet and never opened until today. I started to install the printer and followed the instructions, but when I plugged on feeding (a first step in the installation program), the screen started showing the error Code C2FF8575, more a point of exlemation on the front of the machine and the power button began to blink rapidly. I have insterted the cartridges in it, but it did not help. I followed a tip of troubleshooting I found on the HP site to uninstall your ink cartridges, unplug the printer for at least 60 seconds, then plug back in. There is nothing to help as well. Please help me to solve this problem and get this printer doesn't work! Thank you!

    Hi mekshp and welcome to the Forums of HP.

    I see that you are having errors priner. After reviewing the error code, it seems that it is a fatal error in the firmware of the printer.  I recommend you contact HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: Contact HP worldwide.

    Thanks for posting on the HP Forums.

  • Error code 0xc0000034 after update SP2 for Vista

    Hello

    Yesterday I ran my windowsupdates, one of them was SP2. When I rebooted the computer, a black screen appears with the error code ! 0xc0000034! 142/46596 (_000000000000000.cdf_ms)
    I turned off the computer and restarted again. I chose the recovery mode, but no results, the recovery was loop.

    What should I try next?

    Thanx

    Try to do this first, and then restart.
    Then try again.
    You have the disc from your computer's system?
    You may need to reformat.
    I hope you have backup.
    Good luck.

  • Gets the 0x0000001e Error code in the Windows Vista-based computer.

    Original title: I get the dreaded blue screen of death, the error code is 0x0000001e any help at all would be great :D Publication of minidump files.
    I don't really know what the cause is, it started about a week ago about the time when I tried to install fallout 3 (recently purchased). Now, it produces only randomly when im on the web or happens when I try to play any game fallout not only of pc. I think we can do with one or some of the drivers more but I would like to help before you start drivers unistalling xd.
    Here are my files minidump from the 2 blue screens I had recently, I would have more but I reformatted my comp to see if he'll fix it but there no: / If you are not comfortable with the links to download like that I could just copy and paste the minidump files 2 guy some help: D.

    http://up.HT/OZOUCb

    Hi LiamDonnelly,

    You have McAfee installed on your computer?

    If you have McAfee installed, uninstall it temporarily using the McAfee Consumer Product Removal tool. Therefater, check if the problem occurs:

    How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development)

    Hope the helps of information.

  • Windows Live Movie Maker error Code: 0x80004005__

    When I try to open Windows Live Movie Maker from my list of startup programs, there is a quick flash on my screen, and then the error Code window appears telling me that WLMM had to close and try again from, it. Then this error code is present.

    I am able to open and start Messenger, Mail opens (although I do not use it), Live Call said it's "not available at this time", Gallery of photos and writer, both work very well.

    I wondered if maybe that Movie Maker will not open because I'm in Win 7 and have Windows DVD Maker installed natively with the operating system. I'm probably wrong thinking it, but I was wondering.

    Anyway, the idea is to open Windows Live Movie Maker. Any thoughts on what could be the problem would be really appreciated.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Windows Live Photo Gallery is not responding or does not start,

    http://support.Microsoft.com/kb/944221/en-us

    You can also try this tool

    http://support.Microsoft.com/kb/929833

  • Windows 8 facing c0000185 error code

    Hi all

    I have lenovo z580, im a problem during the startup of windows 8.

    The boot stops at the Blue error screen saying bad_system_config_info and error code is 0xC0000185.

    Main problem is that I don't have my os as capable boot disk or usb to... I don't know the key to product also... I wanted to recover as

    Could someone help me on this please.

    To respond to your request, if the operating system is installed on the computer, your computer manufacturer may be able to provide the drive according to their policy.

    Kind regards.

Maybe you are looking for