Blank white display on Portege 2010

Similar Questions

• Faulty display on Portege 2010

  I have a 3 years Portege 2010. When I use it today the display started to go white, up and down, and then went black. When I restart it I get the Toshiba logo and the first two screens to boot Windows, but then the screen goes black. Sometimes I get more than others before the screen goes black - for example sometimes, I get as far as connecting Windows then it (i.e. Windows) freezes. Sometimes it crashes on the first screen of "Toshiba", before it crashes. Sometimes it gets past the boot selection menu and then I get a BSOD (IRQL_NOT_LESS_OR_EQUAL).

  I also noticed that if I press the two ends of the (extended) battery the display begins to break up.

  This sounds like a faulty screen or a faulty connection? If the latter is this something I could try to fix me? If not, what is the approximate cost of the setting of this kind of thing?

  TIA
  Ian

  Hello

  There are a lot of different issues with the display relly. Really, I n know where to start with comments. ;)

  I presume that you can install the recovery image to get rid of BSODS and check how it works with the external monitor. I guess that on an external display it won't you have problems with the black and white display.

  As you know on this path, it is not easy to give any kind of diagnosis. If everything works well with external display problem is LCD. If the external monitor, you will notice some strange behavior, it may result from the graphics chip on the motherboard. The test please a bit more intensively.

• Blank white display of ADL AIR 14.0

  Hello guys,.

  IM new to AIR development and I downloaded the AIR version 14.0.

  I've coded a few screens using Starling & feathers, when compiled using amxmlc in its working fine but when I use the ADL on my app.xml it shows Virgin.

  Here's my app.xml

  <? XML version = "1.0" encoding = "utf-8"? >

  " < application xmlns =" http://ns.Adobe.com/air/application/14.0 "minimumPatchLevel ="0"> "

  < id > hand / < ID >

  < name > hand iOS < / name >

  < versionNumber > 0.0.1 < / versionNumber >

  < file_name > Main < / name of the file >

  mobileDevice < supportedProfiles > < / supportedProfiles >

  < initialWindow >

  < content > Main.swf < / content >

  < title > < /title > hand

  < / initialWindow >

  <>icon

  < image29x29 > icons/AIRApp_29.png < / image29x29 >

  < image57x57 > icons/AIRApp_57.png < / image57x57 >

  < image512x512 > icons/AIRApp_512.png < / image512x512 >

  < / icon >

  < / application >

  Thank you

  Carlos

  Hello

  After abuse of google, I discovered, I have to add directly inside the initialWindow tag, I added it inside the tag before application

  Thank you

  Carlos

• Skype program displays a blank white window

  Original title: program compatibility Application Applications Apps game games Legacy Crash accidents Application Hang hangs

  I open my Skype program it shows only blank white nothing more

  Hi GraceNaim,

  -When you receive this error message?

  Problems with the login window are, as a general rule, related to problems with your Internet Explorer and JavaScript. No matter what browser you use, Skype (from version 5.5) uses Internet Explorer and JavaScript for creating and managing the login screen.

  Uninstall and re-install again and check if the problem persists.

  You can use the programs and features to uninstall programs or to change the configuration of the program by adding or removing certain options.

  1. open programs and features by clicking on the Start button on the Control Panel, click programs, and then clicking programs and features.

  2. Select a program, and then click Uninstall. Some programs include the ability to modify or repair the program in addition to uninstall. But many simply offer the option uninstall. For more information, visit the following link:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also check the help below link and check if it helps.

  http://community.Skype.com/T5/Windows-desktop-client/login-screen-is-blank/TD-p/546691

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Portege 2010 - bad BIOS (block3)

  I have a portege 2010 with a bad bios
  on normal startup, it goes to screen
  BIOS (Block3) is damaged! (Call the repairman).

  so I tried to reflash the bios in the usual way.
  do a disk with
  -----
  biosfile biofca6t.com
  chgbiosa.exe
  -----
  and start either with the flashing the BIOS button (just to the left of the space bar)
  or by pressing any key on-screen "block3.

  It does not load the program chgbiosa.exe. who reads the bios file
  Hot flashes and it recharges
  -----
  Reading BIOS file...
  Data erasure and writing the BIOS...

  ROM write successful!
  Utility finished
  -----
  Then it restarts

  but unfortunately. nothing changes. He still goes to the display of block 3

  so I think I can have damaged the chip of the bios on my hands.
  Since the successful re-flash does nothing...

  -----------------
  NOT RECOMMENDED
  So I decided to check if the chgbiosa actually do anything.
  so, during the writing process, I unplugged the power.
  (incomplete writing process) and I'm done with a (block 1)
  damaged. An another bios update later.
  and we are back to (Block3)
  so it does not write in the bios
  DO NOT TRY THIS: can erase the part "failsafe" of the bios
  ---------------------
  so the question is. Where should I go from here.

  I'm willing and able to unsolder the chip and flash also
  but I don't have a bios not 'complete' user flashable part only of it since the official updates of the file...

  can I order a new chip preflashed somewhere?

  can I somehow totally clear the bios user box then it reflashing?

  can - I somehow replace the bios (more than the standard chgbiosa way?)

  can I transplanted the and of a motherboard Portege 2000
  (the failsafe will start so I can flash with a bios P2010?)

  I can start another tool, describing it as "chgbiosa.exe" on the floppy drive, which can be useful

  can I do the smaller biosfile, so it won't need block3 (remove the logo toshiba etc.)
  from the rom file?

  Any suggestions are appreciated

  This notebook is a project of the company. I am prepared to do anything...

  / Jean-Paul

  Hello

  So many questions, and most of them must be answered by technicians. I really think you need professional help. I recommend you to call the nearest Toshiba service provider and ask for help.
  To be honest, I don't think that you will be able to order this chip anywhere. Speak with the service.

  By the way: mainboard renovated for Portege 2000/2010 with work well chip BIOS, I found on eBay for 39 euros, so if you can not do anything and BIOS repair buy new motherboard, Exchange and be happy.

  Furthermore, I Portege 2000 and it's really nice laptop.

• Portege 2010: machine wrong message appears

  On my 2010 Portege message 'bad machine' is displayed using recovery for Portege 2000 CD

  Detais are here.
  Portege 2010 > origionaly was a Chinese version of Win XP Edition family >< i="" bought="" it="" from="" a="" person="" who="" some="" how="" had="" installed="" winxp="" pro="" and="" win="" 98="" on="">

  I tried to format HD to use my own copy of XP pro Corp... that's where my problem started.

  Portege Boote drpm WIn98 CD and boot drive as well... after loading of diagnostic tools > I get the message «device driver MSCD001 not found and not found CD driver...»

  My qUESTION: How can I proceed from this Message >

  >< i="" bought="" portege="" 2000="" 3="" recovery="" cds="" assuming="" that="" it="" will="" restore="" portege="" but="" after="" running="" first="" cd=""> <> I get a message of great evil Machine

  MU Question is is it possible to restore the Portege 2000 the Portege 2010 that origionally had a Chinese version of the OS...

  What can I do to install WinXp on my Portege 2010... and how can I fix the device mscd001 message not found CD driver

  Hello

  Unfortunately, there is nothing to see. The recovery image is created for each laptop model and may not be used for the different laptop models. Can you imagine the situation you can use each medium recovery on each laptop model?

  Each cell phone has hardware specific, and because of this, the recovery media are specific for particular laptop model.

  By the way: which CD-Rom device that you use?

• Video full screen gives a blank white screen.

  Original title: Video full screen mode issues.

  I have a Dell desk top that is running Windows XP Home Edition. Every time I watch a TV show or a movie online and try to open it using the full screen, I always get audio, but you will get a blank white screen.  I can display mode small screen, but the mode full screen does not seem to work.  Any ideas on how to solve this problem?  Thank you.

  Thanks, but I already fixed it.  The browser is Internet Explorer 8.  No I did not any Chang recently except to IE 8.

  I was using Flash Player to view the website of lifetime television show.  I started to play the show, and while he was in NON-plein screen mode, I click with the button right on the screen, and click on properties, then I unchecked the box that appeared (there was only one box, and I don't remember what she said next to the box).

  I clicked on close or OK and then clicked on icon mode full screen, and it worked.

  Thanks for your help, if.

• E2500 Web Pages blank white watch

  This router sometimes displays blank white pages web sites. I at first glance the site could have been banned by the INVESTIGATION period. Eventually, a configuration of security on my computer. Problem of modem. This desktop computer is "wired" to the router. I plugged the cable computer ethernet directly into the modem and the problem disappeared.

  Is this a known issue? If so, is there a fix. Otherwise, any recommendations?

  Randy

  rwmol1945

  Once you press the reset button of the router, all settings on your router will be deleted.

  To well reset, follow this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=9d2ff02077f645679972a73455b97c40_4599.xml&pid=80&r...

  Title: Reset the factory default Linksys router

  Article ID: 4599

  After the reset, you must reconfigure the router. If you have provided with the router installation CD and then use it to configure the E2500.

• All files in Windows Explorer appear as an icon of the blank white page

  When I start my computer, I open Windows Explorer and open a folder to look at a few pictures, everything seems in good condition. All icons and thumbnails display correctly. So, I'm going and open a file to view it, or go back on the record and then go back in the. All icons that originally appeared as the icon or the correct thumbnail now appear suddenly, like a blank white page. I tried to rebuild the icon cache and don't have any managed to solve the problem. Please help me if you have any suggestions, what could be wrong... Thank you!

  Aaaah, as a matter of fact Yes! I have solved my problem. I hope this works for you also. I discovered that when I started the Task Manager and look under 'Process' there was a dllhost process that gradually consumed more in addition to my memory. It would slowly increase until that eventually the entire system would crash and I have to restart. So I solved it by putting a term simply the dllhost process. Every once in a while, however, I see the same problem product and I must go to the Task Manager to check... and of course, this same dllhost will eat all my power of transformation. So I just 'End process' on this topic again. Not a big problem because it happens less frequently than once a month to me and its an easy fix. So start up the Task Manager and see if you have a dllhost using an insane amount of memory. If so, this is probably what is causing your problem. I really hope this has solved your problem because it was a huge pain in the * for me. Very frustrating. I must also point out that the first time I tried to stop, it would just pop up again, so I had to close about 5 times in a half-hour time stretches on probably. DO NOT 'end process' on ALL Dllhost however as it may cause other problems with your computer. Just end the process if she consumes a ridiculous memory... amount as more 1 000 000. Oh yes, I also wanted to add that I was a little nervous about to terminate a process dllhost due to potential problems said it could cause, but when I finish this one, one that consumed all of my memory, no negative side effects occurred, none that I noticed.

• in the android device my phonegap project shows a blank white page

  in the android device my phonegap project shows a blank white page, while the page displays well in Wellington

  If you are pulling content on a remote server, which must be displayed in the Web view directly, you need a correct rule "allow-navigation" for that content, so it's on a white list.

  Documentation of the plugin whitelist clearly explains things.

• State of buttons link to a blank white page

  I build state buttons with three components: the image of State button, a chart inside the frame and the text on the chart. Each is tied to a new internal page. When I mount the button and put it on the master page and the preview switch, the button seems simply a link to an empty page, white (although not EVERY time). I went back again (and again and again...) and make sure that all components of the button are pointing to their page target and everything seems to work individually (I can leave the three separate components on the master page and every part of the links very well). But when I mount the button and place it in its final location... link to the blank white page. And it doesn't do this with all the buttons, only some of them.

  What happens here? Thanks in advance.

  It's the third clumsy internal Preview of Muse behavior (as the HTML output seems to be very well) I met today in this forum. I think we might conclude that it is always essential test the real HTML output, either by displaying a local preview in a browser or by putting online, BC. , or your own hosting. But quick Preview of Muse is too imperfect to trust to...

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• FF 40 for Linux. Blank white page without control. Own profile fixed but causes blocks colored instead of the text in the address bar.

  Because the update to 40 FF lance a blank white screen with no controls, no toolbar or address bar. I can create a new profile in the Profile Manager and then launch firefox functional but a previous bug still exists, the text in the address bar is replaced by blocks of solid colors. The only solution I know because this is: config > gfx.xrender > toggle true to false, but on the relaunch firefox returns the white screen.

  2 should I proceed to report a bug, and where should I report it? On bugzilla? Is it easy to report a bug or find out if she is already underway on?

  The system I use is Lubuntu 14:04

  I found my own solution to the problem, which was caused by the incompatibility of the 40 FF with the Lubuntu versoin I used 14:04, so I've updated at 15:04 and FF still works, though only after the creation of another new profile.

• E-mail links are not open now. I just get a blank white page. This just started happening, and I don't know how to correct it.

  I click on a web link in an email in gmail... Firefox opens, but there is nothing other than a blank white page. It is a new problem; It never happened before last week. I want the link to open in Firefox, and they used to. I thought that it was show a blank b/c I had not "downloaded photos" on e-mail before clicking on the link, so I tried and which seem to help, but this morning I downloaded images and then clicked on the link... nothing but a blank white page! I also rebooted new version, thinking that would help, cleared my cache, etc. but don't works do not. Please notify.

  Search for the problems caused by the DDE.

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

  You can also try to redo the setting of the default browser.

  • http://KB.mozillazine.org/Default_browser
  • https://support.Mozilla.org/KB/setting+Firefox+as+the+default+browser+does+not+work

• Update CPU is possible on Portege 2010

  Hi, I wonder if it is possible to upgrade the processor on my Portege 2010, I work as a pc technician so I have no problem to do the job.
  If so can what models I use?

  Thank you

  Upgrade CPU on the laptop is really not simple and delicate. I think you know this because you're a pc technician.
  The Portege 2010 seems to be an old I didn t find many details on this device, but I found out that this laptop was equipped the PIII-M (Mobile) 866 MHz 133 MHz FSB processor.

  What you could do is install and hardware diagnostic tool to find out which chipset is supported. Then check the details of this chipset (maybe on Intel page) and which could be supported by the CPU.

  However, I'm really skeptical that the laptop will be stable after the upgrade of Mr. overheating could be a big trouble!