Blinking cursor Windows 7 iMac, retina end-2014

Similar Questions

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• I have 6 s phone is not connected to the iMac (retina 5K, 27 inches, end of 2014) using bluetooth

  Hi every time I try to connect my i phone 6s with iMac (retina 5K, 27 inches, end of 2014) performances

  connection failure ' jatin iMac is not supported.

  Pls help its strange

  Connect an iPhone to a computer is not supported.  Has never been.

  Bluetooth: Why can't connect my iPhone or iPad with another iOS device or my computer?

• iMac (retina) - Fusion 8 - 10 Windows - very slow

  Hi guys,.

  I need help troubleshooting a Windows 10 virtual machine that runs at snail's pace. Installation program:

  -iMac (retina 5 k, 27 inches, end of 2015)

  -Processor: 3.2 Ghz Intel core i5

  -Memory: 8 GB

  -Storage: 1 TB drive of Fusion

  -Graphics card: AMD Radeon R9 M390

  -OS X 10.11.6 (El Capitan)

  -VMware Fusion 8

  -10 Windows Home / 64 Bit, completely updated according to the settings / Windows Update.

  I installed Fusion 8, installed 10 Windows using the ISO from Microsoft site and added VM Ware Tools. The installation went without any problems.

  VMware for this Windows 10 VM parameters:

  -CPU: 1 heart of processor

  -RAM: 1 GB (shown as recommended in the control panel)

  -Hard drive: 60 GB

  I adapted only screen size settings in order to have Fusion / 10 Windows using the full resolution on the Retina display (Scaled high resolution) for unity and full screen. "Accelerate 3D graphics" it's on.

  I'm now trying to use this virtual machine and it is extremely slow - both in full screen mode and one-stop shops. For example, after you click the icon on the start menu, it takes about 10 seconds until the start menu appear effectively. Chrome opening = 90 seconds. What switching applications or dragging of windows, you can sometimes watch the screen redraw. Sluggish _really_.

  OS X monitor shows only moderate, activity should the CPU activity.

  In the Windows 10 VM, the Task Manager / processes tab shows moderate (30%) Support CPU but memory, its use is constantly between 90 and 100% - even when no apps are open. However, no task stands out as a resource hog.

  I went on "Pre-allocate disk space" in the control panel merge and change RAM of 2 GB to give VM more. Performance feels a whole little bit better, but the load high memory remains even when the system is idle.

  This feels like a cheap $ 250, low-power PC. Is this normal?

  I'd appreciate any help here.

  

  1 GB of RAM for Windows 10 is far from weak. It will be 'run', but not well. Even 2 is pushing it. 1 processor is pushing it too.

  It behaves like a PC $250 because that's essentially what you have given to resources.

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• iMac 5K (end of 2014) is not supported this machine OpenCL?

  The iMac (retina 5K, 27 inches, end of 2014) with AMD Radeon R9 M290X 2048 MB graphics card would not support OpenCL?

  Yes. The Mac supports OpenCL. You ask because you heard something to the contrary.

  Russ

• iMac (retina 5K, 27 inches, end of 2015) 1-2 second stops when you try to open or switch between applications

  1-2 second ago stops whenever I try to open an application or switching between applications. The animation of the application icon in the status bar at the opening of the starts, pauses for 1-2 seconds and ends before you open the application. When you click on an inactive application window it pauses for 1 to 2 seconds before making the active window. This only happens after a reboot. It takes about a day being initialized for this problem to occur.

  This does not seem like behaviour expected of such a new machine with charge card. All advice is appreciated.

  Here is my EtreCheck report:

  ***

  EtreCheck version: 2.9 (250)

  Report generated 2016-02-03 11:33:10

  Download EtreCheck from http://etrecheck.com

  Running time 01:31

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Click on the link [check files] help with unknown files.

  Problem: Computer is too slow

  Description:

  1-2 second ago stops whenever I try to open an application or switching between applications.

  Hardware Information: ⓘ

  iMac (retina 5K, 27 inches, end of 2015)

  [Data sheet] - [User Guide] - [Warranty & Service]

  iMac - model: iMac17, 1

  1 4 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  8 GB DDR3-1867 MHz ok

  0/DIMM1 BANK

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM0

  8 GB DDR3-1867 MHz ok

  BANK 1/DIMM1

  8 GB DDR3-1867 MHz ok

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: unknown

  Video information: ⓘ

  AMD Radeon R9 M395X - VRAM: 4096 MB

  iMac 5120 x 2880

  Software: ⓘ

  OS X El Capitan 10.11.3 (15 d 21) - time since started: about one day

  Disc information: ⓘ

  SM1024G SSD APPLE disk0: (1 TB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  iMac (disk1) /: 999,33 (Go 652,85 free)

  Storage of carrots: disk0s2 999.70 GB Online

  USB information: ⓘ

  Broadcom Corp. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Western Digital my passport 071D 1 TB

  EFI (disk2s1) : 210 MB

  Boot OS X (disk2s3) : 134 MB

  Backup local (DIS3) Volumes/iMac/iMac local backup: 999,51 (Go 107,33 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk2s2 999.83 Go online

  Apple Inc. IPhone.

  Reader SuperDrive for MacBook Air Apple Inc..

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Guardian: ⓘ

  Mac App Store and identified developers

  Unknown files: ⓘ

  /Library/LaunchAgents/com.support.com.PerUser.Nexusd.plist

  /Library/LaunchAgents/com.support.com.PerUser.Nexussrvd.plist

  2 unknown files found. [Check files]

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Belcarra.iokit.USBLAN_netpart (2.0.2) [Support]

  com [no charge]. Belcarra.iokit.USBLAN_usbpart (2.0.2) [Support]

  com [no charge]. RemoteControl.USBLAN.usbpart (2.0.6) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_netpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.netpart.Panther (1.6.1) [Support]

  /System/Library/Extensions/Belcarra.USBLAN_usbpart.kext/contents/plugins

  [no charge] com.belcarra.IOKit.usbpart.Panther (1.6.1) [Support]

  / System/Library/extensions/remotecontrol. USBLAN_usbpart.kext/contents/plugins

  com [no charge]. RemoteControl.USBLAN.panther (1.6.1) [Support]

  Launch system officers: ⓘ

  [loading] 148 tasks Apple

  [operation] 88 tasks Apple

  Launch system demons: ⓘ

  [loading] 191 tasks Apple

  [operation] 96 tasks Apple

  Launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [loading] com.adobe.CS5ServiceManager.plist [Support]

  [loading] com.support.com.peruser.Nexusd.plist [Support]

  [failure] com.support.com.peruser.Nexussrvd.plist [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist [Support]

  [loading] com.adobe.agsservice.plist [Support]

  [loading] com.adobe.fpsaud.plist [Support]

  [operation] com.backblaze.bzserv.plist [Support]

  [loading] com.malwarebytes.MBAMHelperTool.plist [Support]

  [loading] com.microsoft.office.licensing.helper.plist [Support]

  [operation] com.sonos.SonosLibraryServer.plist [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist [Support]

  [failure] com.adobe.ARM. [...]. plist [Support]

  com.apple.CSConfigDotMacCert [fail]-[...] @me.com - SharedServices.Agent.plist

  [operation] com.backblaze.bzbmenu.plist [Support]

  [failure] com.google.GoogleContactSyncAgent.plist [Support]

  [loading] com.google.keystone.agent.plist [Support]

  [operation] com.spotify.webhelper.plist [Support]

  [loading] com.valvesoftware.steamclean.plist [Support]

  [operation] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist [Support]

  [operation] ws.agile.1PasswordAgent.plist [Support]

  Items in user login: ⓘ

  Workflow application (/ Applications/Flux.app)

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Cinch Application (/ Applications/Cinch.app)

  Canon IJ Network Scanner Selector2 hidden Application (/ library/printers/Canon/IJScanner/utilities/Canon IJ Network scan Selector2.app)

  SizeUp Application (/ Applications/SizeUp.app)

  Dropbox application (/ Applications/Dropbox.app)

  The messages application (/ Applications/Messages.app)

  iTunes application (/ Applications/iTunes.app)

  Other applications: ⓘ

  [operation] 2BUA8C4S2C.com.agilebits.onepassword - osx-helper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck

  [ongoing] com.getdropbox.dropbox.48992

  [ongoing] com.irradiatedsoftware.Cinch.151392

  [ongoing] com.irradiatedsoftware.SizeUp.12192

  [ongoing] jp.co.Canon.bj.scan.network.scannerselector2.90592

  jp.co.canon.bj.printer.app.MPNEX213.45792 [loading]

  [ongoing] JP.co.Canon.cijscannerregister.14112

  [ongoing] org.herf.Flux.49952

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: Version: 1.0.0.0 - 10.6 [Support] SDK AdobeAAMDetect

  FlashPlayer - 10.6: Version: 20.0.0.286 - SDK 10.6 [Support]

  QuickTime Plugin: Version: unknown

  Flash Player: Version: 20.0.0.286 - SDK 10.6 [Support]

  Default browser: Version: 601 - SDK 10.11

  SharePointBrowserPlugin: Version: 14.5.8 - SDK 10.6 [Support]

  Unity Web Player: Version: UnityPlayer version 5.2.0f3 - 10.6 SDK [Support]

  Silverlight: Version: 5.1.41105.0 - SDK 10.6 [Support]

  JavaAppletPlugin: Version: update of Java 7 55 check version

  User Plug-ins internet: ⓘ

  WebEx64: Version: 1.0 - SDK 10.5 [Support]

  Web of Google Earth plugin: Version: 7.1 [Support]

  Safari extensions: ⓘ

  1Password

  Add to the list of Amazon gift

  InvisibleHand

  Little time

  PIN button

  3rd party preference panes: ⓘ

  Backblaze backup [Support]

  Flash Player [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  iMac: disc size: 999,33 GB disc used: 346,49 GB

  Destinations:

  The iMac HD Gallagher family backup local [Local]

  Total size: 999,51 GB

  Total number of backups: 82

  An older backup: 27/05/15, 12:54 AM

  Last backup: 03/02/16, 10:34

  Backup disk size: too small

  Backup size 999,51 GB< (disk="" used="" 346.49="" gb="" x="">

  Top of page process CPU: ⓘ

  140% nsurlsessiond (2)

  85% launchservicesd

  78% photolibraryd

  11% cloudphotosd

  9% com.apple.photomodel

  Top of page process of memory: ⓘ

  1.70 GB kernel_task

  1.12 GB launchservicesd

  1.12 GB cloudd

  Softwareupdated 492 MB

  Photolibraryd 229 MB

  Virtual memory information: ⓘ

  6.39 GB of free RAM

  26,00 used GB RAM (18,35 GB being cached)

  8 MB Swap used

  Diagnostic information: ⓘ

  3 February 2016, 11:31:58 /Library/Logs/DiagnosticReports/launchservicesd_2016-02-03-113158_[redacted].cp u_resource.diag [details]

  / System/Library/CoreServices/launchservicesd

  3 February 2016, 11:30:22 ~/Library/Logs/DiagnosticReports/iTunes_2016-02-03-113022_[redacted].crash

  com.apple.iTunes - /Applications/iTunes.app/Contents/MacOS/iTunes

  3 February 2016, 08:18:45 /Library/Logs/DiagnosticReports/nsurlsessiond_2016-02-03-081845_[redacted].cpu_ resource.diag [details]

  / usr/libexec/nsurlsessiond

  1 February 2016, 19:53:04 self-test - spent

  Hello Agent37,

  What are your settings of Photos? Looks like you have a ton of photos regenerate and transferring to iCloud. I've seen similar reports, but I'm not a heavy user of Photos. I'll see if I can move your question on the forum Photos: Photos for Mac

• iMac (retina 5K, end of 2015) in 64 bit mode?

  How can I tell if my iMac (retina 5K, end of 2015) runs in 64-bit mode or not?

  10.11.6 OS

  Y at - it software that would let me set it to 64 or 32?

  Thank you.

  Mac

  All iMacs for years past were 64-bit, yours is. I believe that there is evidence in the application of the information system, but you will need to do some research.

• iMac 27 end of 2012 windows 7 installation problems.

  Dear Apple community.

  First of all I know that the topic was discussed a few more times, but after I tried to follow the instructions and directions and patterns almost everywhere on the net I am a blind spot.

  I have an iMac 27 "end 2012. I managed to install Windows 7 with Bootcamp through a combination of different methods, on line. (downloaded the Bootcamp Support 5.1.5621 software as described in many forums)

  But I am stuck because I always have problems with my UBS3 ports that do not allow my keyboard and graphic tablet to work (I had to uninstall the app in safe mode to return to UB2) and the resolution of the screen that is only 1280 x 720 at the arrow, trash and other stuff that appear distorted.

  Since I'm on some architecture and 3D modeling programs in Windows I want to ask for help because I don't really know where to look further.

  When I solve the problem, I promise to write here a detailed method to install win7 on iMac late 2012 for those in need.

  Can anyone help me to finally get a solution? Thanks a lot for your time and looking forward to hear that here you.

  Hi Polfus,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your Boot Camp installation. If you continue to have unexpected behavior of port connections and display resolutions in Boot Camp, you can find the troubleshooting steps in the following article useful (my apologies if you've seen elsewhere / fact them):

  If you do not see some Mac functionality if you are using Windows on your Mac - Apple Support

  You can also check that you are running the 64 bit version of Windows 7, as shown here:

  Install Windows 7 and earlier Apple Support on your Mac using Boot Camp -

  Concerning

• my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  my new iMac (retina 5K, 27 inches, end of 2015) 4 GHz Intel Core i7, 32 GB 1867 MHz DDR3, TB 3.12 Fusion Drive bluetooth not working do not message comes bluetooth is not available

  Reset the SMC.

  Barry

• iMac 27 "retina (end of 2015) with target disk Mode Macbook Pro?

  Hello

  I am interested in buying an iMac 27 "5 k retina (end of 2015) my household has also two early 2011 15" Macbook Pro, which are still in use.

  I understand that this iMac no longer manages the target Display Mode. As I am unable to use the iMac as an external display for my Macbook, would it be possible instead, connect via Thunderbolt, a Macbook to the iMac, and access only to files hang when necessary?

  If this can complicate things, I am limited as to how I can custom configure how to buy the iMac 27 "(je serais d'acheter la base 27" iMac, avec 1 to de disque DUR). " I also intend on buying an external SSD that I would use to run/start the iMac, using the drive HARD internal to the iMac as ' dedicated local storage'otential

  EDIT: Would there be potential problems? I would be able to access just like I would if I say it, hooked to a USB key? If I was working on the files, I need to import them to the iMac or be able to work directly from the drive?

  Yes.

  (138665)

• Using end of 2015 i7 iMac RAM with end 2014 5K iMac i5

  Hello

  I just bought a 27 "iMac i7 end of 2015 with only 8 GB of ram, as I had intended to pass through OWC to 32.  My question is, I wanted to know if I can take the default value 8 GB that came with my i7 mac end of 2015 and use it in late 2014 5 K iMac i5 my wife?  Anyone know if they are backward compatible and will work in the end iMac 2014 5K?  Wouldn't lose the RAM memory.

  Thank you!

  The iMac of 2014 required

  4-204-pin PC3-12800 (1600 MHz) DDR3 SO-DIMM

  and use the iMac of 2015

  	4-204-pin PC3L-14900 (1867 MHz) DDR3 SO-DIMM

  Need exact ram ram and ising spec Mac that isn't just asking trouble.

• Computer will not start with Windows. I get a black screen and a blinking cursor.

  Windows XP Home Edition startup problem

  I have Windows XP Home Edition, but the computer does not start at the top.  I get a black screen and a blinking cursor.  I have an XP installation disc.  I was in the Recovery Console to recover all of the standard tasks, but nothing helped.

  Brand, model and model number of your PC?

  Are you able to get into the BIOS?
  What took place prior to this problem?
  For now, you can read this to get some ideas:
  http://tips4pc.com/computer-problems/my-computer-boots-up-to-a-black-screen-with-a-flashing-cursor.htm

• Windows 7 does not start - blinking cursor

  When I try to boot normally, the computer gives me just a blinking cursor just after the start of my motherboard screen. Windows does not load.

  I run my system recovery disk. When I, the recovery of the system said that there is no OS installed. I have run the command prompt and enter in diskpart. DiskPart has said there is a HARD disk that is online and 465 GB. It is correct. When I use the volume in the list with the selected HARD disk, I get a message saying the Volume letter is C, the file system is NTFS, and the status is healthy. When I run the partition from the list, I learn that this partition is my main partition and it has an offset of 101 MB.

  I have run chkdsk c: /F

  1/3 Chkdsk checks the files.

  374272 file records processed.

  Finished files checking.

  4625 large file records processed.

  0 incorrect file records processed.

  2 EA records processed.

  60 files analysis.

  2/3 Chdsk check indexes

  465766 index entries processed.

  Index verification completed.

  0 unindexed files analyzed.

  0 unindexed files recovered.

  3/3 Chkdsk checking security descriptors

  374272 folder processed SDs/SIDs

  Verification of completed security descriptor.

  45748 processed data files.

  Chksdsk check Usn Journal...

  34049184 USN bytes processed.

  Audit of the USN Journal is complete.

  Windows check the file system and found no problem.

  488282111 KB total disk space.

  410690936 KB in 323567 files.

  163652 Ko 457749 index.

  0 KB in bad sectors.

  491643 KB in use by the system.

  76935880 KB available on disk.

  4 096 bytes in each allocation unit.

  122070527 total allocation on the drive units.

  19233970 allocation units available on disk.

  Cannot transfer messages saved in the journal of the events with the 50 State.

  (This is because I'm on the recovery of the system).

  I hope that this means that my HARD drive is not dead. Any help would be greatly appreciated.

  Hello

  I suggest using a different mouse and keyboard if you have one to see if you can get Windows to start normally.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.