Bloatware on new dv7

Similar Questions

• Express card slot new dv7

  I am awaiting delivery of a new dv7. My old laptop (old and still under Windows 98) had a PCMCIA slot I have a couple of cards for. My question is quite simple, the old PCMCIA cards will fall into the new Express card slot?

  Thanks in advance for your answer.

  dv7t-1000CTO Vista Home Premium (32 bit)
  DV6-1350us Windows 7 Home Premium (64-bit)

  No, I'm sorry to say that they will not. Although most of the features that people used to use pcmcia cards is attended the computers internal laptop is still a rude awakening for a lot of people when they can use the old card mobile broadband on this new laptop and they must spend more money to get a usb or expresscard version.

  photos of different cards for laptop computer

  Message edited by Hüffer 03/12/2008 16:15

• Brand new dv7-7212nr want missing SW or config for SSD?

  Just bought a new non-custom desire dv7-7212nr 2 days ago.  Main specifications are:

  3rd gen i7-3630QM

  750 GB 7200 RPM HARD drive

  Drive hard acceleration Cache 32 GB SSD

  8 GB OF SDRAM

  Windows 8

  Other components are irrelevent to my questions or situation.

  The wording 'Hard Drive Acceleraton Cache 32 GB SSD' spec would mainly means the technology Intel Rapid Storage, perhaps combined with the Intel Quick start technology.  Yet, on this computer, I can find only an Intel Rapid Start Technology Manager.

  In Panel of-> system and security-> administration-> computer management tools > storage-> disk management, I can see disk 0 to 699 GB with several partitions, which include the OS (C) and (D) RECOVERY.

  Disc 1 has proved to have an 8 GB partition.

  I find that disk 1 is the SSD and this computer has only the Intel Rapid Start SW technology and configuration.  I read on the internet for this tech in fast ignition to work, an SSD should have a partition that is exactly the same size as the SDRAM.

  My first set of questions are: 1) is my correct conclusion? (2) how HP put in an SSD of 32 GB and uses only 8 GB of it?

  I chatted online with an HP support who asked me to download from a website for HP Intel Rapid Storage Technology and SW drivers and assured me that the installation would not cause any problems or conflicts with the existing configuration, and so I did.  I have no ill effect (yet), but it doesn't seem to be that a good effect is.  On the one hand, it is supposed to be a new 'Intel Rapid Storage Technology' application, but there is none.  So HP support and I can not go further, and support suggested that I do a system recovery, return the setting to factory.  I told him the computer is 2 days, and I to him did nothing other than downloads, that he asked me to do.

  My next set of questions are: a) HP wouldn't put in quick start and quick storage in this product, taking into account the SSD of 32 GB? (b) is there a way to add storage now fast SW and config to envy dv7-7212nr to fully use the 32 GB of SSD? (c) do I keep off to pass my own files on this computer before the problem of cache SSD?

  Finally, I did the Windows experience index runs on the computer and got a score of 5.9 on performance of the hard disk.  I read on the internet that the score is in line with the performance of disk HARD 7200 RPM, which suggests no effect of cache SDS.

  I realize I'm putting in a long post, but I wanted to provide enough information for the experts to evaluate and give answers.

  Thank you very much!

  XLIU wrote:

  So, how do I know / check / detect that the other 24G of the 32 GB of SSD is used for the RAID config? Thought that the RAID has not SSD.

  I looked at the config of the BIOS at startup; It shows no option for TSRI but only Intel Rapid Start Tech. It seems that the dv7-7212nr want to support any, TSRI unlike advertising on the dv7-7212nr box.

  First of all, make sure that you download and install the driver of technology Intel Rapid STORAGE for the Envy HP dv7-7212nr here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112591-1&cc=us&DLC=en&LC=en&OS=4132&product=5309489&sw_lang=

  After installation, find Intel Rapid Storage Technology and run. It must start with a screen that looks like this:

  

  It's my real desire HP dv7-7212nr. The screen may be slightly different from mine because I fiddled with technology Intel Rapid Storage Technology (for example, the default Cache volume is 22 GB, where, as mine said 21 GB). Although the WSSD is 32 GB, the size displayed in the Windows is always less than the specified size (30 GB instead of 32 GB). Similarly, the 750 GB hard drive is displayed as GB 699.

  As you may already know, the 8 GB data volume is configured as a partition hibernation for Intel Quick START technology, and the rest, 21 GB in my case, is used as cache acceleration to Intel Rapid STORAGE Technology. The status of SATA (750 GB HDD) drive "fast-track" means that the hard drive is "fast-track" by the cache on the SSD drive and that it is configured and working properly. You can easily change these settings if you take the time to read and learn about it; for example, you can disable the quick START (hibernation partition) and use the whole SSD for fast STORAGE (acceleration).

  Your BIOS should certainly have an entry indicating the Intel Rapid STORAGE technology works properly. I forgot the exact name of it, but I will edit this post to let you know what he said exactly once that I reboot to enter the BIOS again.

  Edit: In the BIOS, go to System Configuration > UEFI Device Configuration (under Intel Rapid Start technology) > technology Intel Rapid Storage Technology and you should see a screen similar to mine below:

  

  As you can see, I've fiddled with my setup of the WSSD, and so my quick partition start (hibernation) is in fact 8.3 GB (slightly larger than the default value) and my cache volume is 21.5 GB (slightly smaller than the default value).

• HP f4480 has worked with dv6 but not with the new dv7 after transfer windows easy

  F4480 will not be printed with the new laptop dv7, I can scan to laptop and the printer works with the old dv6 but it will not print and shows no errors. Print jobs just disappear.

  Have reinstalled several times with the removal of the pilot tool and all the info on this site.

  Me using fixed http://support.hp.com/us-en/document/c02554863 of HP diagnostic tools

  A rather well hidden resource.

• kernel data inpage error on new dv7 - bsod

  Hi all

  I had this error once last week and thought it was nothing to worry about. This weekend I had several times. It seems that I can do any number of things, including using chrome, and I'll get this blue screen of death. I ran chkdsk and it initially found errors, but since then nothing. Any ideas on what's going on? Note, I got my 21 days for return in 2 days will be call hp tomorrow if I can't achieve progress today. If I can't fix it tomorrow it is maybe go back. I've only had it for 2 weeks (it took a week to get to me).

  Here is the error:

  KERNEL_DATA_INPAGE_ERROR

  0x0000007A (0xffffffffc000009d, 0xfffffa800c0ae078, 0 x 0000000000000020, 0 x 0000000000000000)

  physical memory dump failed with status 0xc000009c

  does anyone have any suggestions? I ran the windows diagnostics, but it has only detected the error wireless I had. Anyway, any help would be great

  

  Hello

  
  

  303 code is a short HDD test failed, so it would seem that the reader has a physical problem and needs to be replaced - as you are still within the time limit to have the phone replaced, that's what I highly recommend do you.

  Kind regards

  DP - K

• my h/p6500a710f will not scan to my new dv7 h/p premium 64 windows says no computer detected?

  both the laptop and the printer are connected and with all discs, but the printer fine print but willl only will scan on a SD card if try to scan to the laptop it say no computer is detected the two are connected by cable

  wmch0265, see my post above. There are so many of us having exactly the same problem. It's probably a HP software / driver problem. A work around is to go to MS Paint and use the scan function to in Paint to scan and save. HP told me that they cannot do anything about it. I ask others who have the same problem to publish on this site. wilhouse

• try to install dropbox on my new hp envy dv7 8 portable windows

  Hello

  I have a brand new dv7 HP Envy, windows 8, model # laptop DV7-7240 and I try to install dropbox dropshots.com, and I have a problem, thanks for any help!

  Why don't download you https://www.dropbox.com/ ?

  You get errors?

• new Pavilion dv7-7003tx Gt 650 m, I see no option switch to nvidia :(

  Dear guy

  I really need your best help please I'm really sad

  I got new dv7 7003tx 3nd and graph gt650m

  My problem is I can not pass to nvidia and I try as I could, but it didn't look like work help me

  as I bios, nothing to work?

  Please help I have switches light I'm waiting

  Please turn on

  I got tired of my laptop please help me

  I try on the bios and it's nothing options of switches

  heeeeelp

• want dv7 - 7227cl

  I just bought a new dv7 - 7227cl with 8 windows pre installed, I have an ssd (Crucial CT064M4SSD2 M4 64GB 2.5 "SATA III) I'm trying to install in the main hard drive and move that he arrived with a secondary drive, how can I reinstall windows 8 on the ssd, I made the recovery disc, but it will not install on the ssd. I have HP e mailed and they said that if I order the recovery disks, it will install on the ssd. but I called for more information and told me that I can't use an ssd at all, its quite different. can someone please give me a clear answer, I don't want to buy a new win8, I have no problem buying the recovery discs, if they are different than the one I created.

  Thanks in advance

  Link to download Windows 8 (not Pro) 64-bit OEM .iso:

  http://www.Google.com/URL?SA=t & rct = j & q = en_windows_8_x64_dvd_915440.iso & source = web & cd = 1 & cad = AJLN & sqi = 2 & ved = 0CC0QFjAA & url=https%3A%2F%2Fdocs.google.com%2Fopen%3Fid%3D0B0W9PBigPy94aVJWSndyTFNFMzg & ei = ftWCUd29BciB0QHSioGABg & usg = AFQjCNGk_fXi98HFb4oC59xNqqGxDLH - 4Q and bvm bv.45960087, d.dmQ

  You don't know how to burn an .iso in a bootable drive, right? I still think 64 GB will be very tight, but if you exercise the discipline as ensuring the program installation and 'My Documents' on the other drive, you might be OK. Remove the drive from 750 GB during the installation of Windows 8... only have the SSD into the computer and make sure it is in the primary Bay. The drivers and preinstalled programs must be in an on the original drive swsetup folder in the c: / root.

  It is hosted outside on google reader in the cloud and when you go to download, you will get a "we can't find the virus ' warning. I can say that I downloaded and used about 60 days ago to do exactly what you do... reinstall Win 8 on another hard disk on a new computer. It has worked well and there is no virus. You want to scan once you download it, however.

• Pavilion DV7 the touchpad buttons not responding

  My new dv7 (select edition, windows 7-64 b) knows a few difficulties, right click. When I connect the USB mouse with buttons right and left I can right click but areas to the left and make touchpad a right-click differ at all. When I type in the box to right click, he left snaps; When I type in the box to left click, it left clicks. When I tap anywhere on the pad, he left clicks. I installed the latest synaptic drivers, the device properties window tells me that I am using synaptic clickpad V7.4. The tab buttons has a right click button Setup do secondary clicks and all the listening and the buttons are enabled, but still no right click. Looking at some pages of support on the hp website (http://support.hp.com/us-en/document/c00678194), I noticed that the screenshot they show from the menu 'tapping' seems different from what I have on my computer. Namely, that i miss the section "tap zones".

  If anyone can shed some light on this mystery, I would be very grateful.

  -Sam

  To start with you are tapping on right click area or pushing down? new touchpad on laptop new HP design is this button clicks are now integrated into the touchpad itself, but you will still need to make a physical click. Typing in the box click it will operate as a left click as it would activities tap the touchpad function...

• I have a HP Pavilion dv7 - does anyone know if you can buy a battery for this model?

  Looking for a battery for my new dv7.  My space bar periodically made sticks as no matter who else has this problem?

  Hello

  No. "batteries" are only for the line of envy.

• Pavilion dv7-6050ec 2nd HARD drive

  Can I add a second HARD drive to my new dv7-6050ec? It has all (free space, HARD drive caddy), except the cable in the case.  If the upgrade is possible, should which cable I use?

  George THX

  Hello

  See this page.

• change 4296nr to 8 GB (2 x 4) RAM dv7

  I have a new dv7 4296nr and I would like to switch to (2 x 4), 8 GB of RAM to run AutoDesk Inventor and video programs.

  Can I use memory DDR3 1333 (PC3 10600) computer laptop instead of the 1066 which is currently in the laptop? like the following:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231342

  And Yes, I am a lop, he's informed rookie to computers

  Hello:

  Yes, you can of course.

  Here is the link to your service manual:

  http://h10032.www1.HP.com/CTG/manual/c02666747.PDF

  See page 3 for the supported memory info.

  Paul

• Update BIOS dv7 winows7

  Put new DV7 bios updated thru HP assistant now Bios not fully ACPI compliant. HP technical support cannot fix on 2nd computer phone w 3 weeks, same problem. I have send for repairs or get a new one built from China? Dilemma

  It is the process to get back to an older version of BIOS.

  1 immediately after turn on hold, tap, the ESC key.

  2. when the menu is displayed, press F2 for System Diagnostics.

  3. in the list of questions will be BIOS Management.Use the arrow key to move to the bottom & highlight. Press the Enter key.

  4. you should now have an option to restore the BIOS. Use the arrow key again to highlight and press the Enter key.

• Adding a second drive to a dv7-2180us

  I recently bought a new dv7-2180us to replace my older zv5000 of 5 years who has been/is having supply problems. I want to take the drive of the zv5000 and place as a 2nd hard drive in the new laptop (mainly because I don't want to have to fight to keep the old lit long enough to transfer files). Is it possible to do so, and if so do I need something more to mount the drive.

  Thanks for any help.

  Sabrina

  Not exactly. The drive is not compatible with the equipment of the new HP. (IDE connector old to a more recent IDE to Sata connector.)

  You could get an external enclosure and get this support, or you could get a cable adapter, like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16812156015

  I recommend the latter, myself. I have one and it works fantastic for information on older hard drives. It does not have technical knowledge to use, but I think you could probably understand.