Block annoying calls. Without any application of part 3

Is there a way to block calls on Xperia Z3. I get unwelcome calls in an area of 805. I don't want to download an application of part 3 due to the publicity. And barely work. Amy ideas?

Hi Barcelona503,

Unfortunately there is no built-in function, this kind of functionality is usually network based. However, you can arrange for phone number to go to voicemail, everytime without phone ever ringing.

Menu > contact > choose Contact > press pencil icon > press 3 circles on the top right > press all calls to your voicemail.

I hope this helps.

Tags: Sony Phones

Similar Questions

  • Credit card information can be saved to the iPhone without any application

    Credit card information can be saved to the iPhone without any application

    To back up the data on an iOS device, the data must be connected to an application. You can put your credit card info in the Notes. You can put it in the field notes in a contact entry. Mind you, I do not recommend one of these unless you have an access code on your phone.

    Perhaps if you explained exactly what you're trying to do, somebody can formulate a sensible response.

  • While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

    While on a page web, using one of several browsers, it will take off and scroll down without any input from me. Seems to be intermittent but annoying. All solutions?

    This could be a case of interference.   Read this document about it.   Think about the suggestion of new electonic or other nearby wireless devices.   I recently read the someone pen wacom being the culprit.

    Potential sources of interference Wi - Fi and Bluetooth - Apple Support

  • Maintenance without any third-party application

    I'm counting on Apple to include an automatically procedure maintenance under OSX without any third-party application.

    So he is wisely let my iMac all the night THERE for an OS X Maintenance?

    Any ideas will be appreciated.

    It is not necessary. OS X will run maintenance, the next time that the Mac is restarted.

  • Call method or the third part of the application in the Notification bar.

    Hi all!

    I wonder if it's possible to start a third-party application, or call a method in an application in the notification bar if it has an icon shown here?

    My app puts an icon there, without a message and I need to click on it to launch a different application or to call a certain function in my application (which runs in the background).

    I did a lot of research and seem to get that he cannot be but no evidence tangible that it cannot be done. I must add an Inbox and the listener and start an application of third party like this, when a user clicks on a message?

    Thank you.

    You can use
    http://www.BlackBerry.com/developers/docs/7.1.0api/NET/rim/device/API/system/ApplicationManager.html
    to launch other applications.
    to call your own application, I would suggest sending a global event (using the same class)

  • I have mac should I buy to work on all the application cloud adobe without any lag?

    I'm working on especially after effect, first pro, Illustrator and fuse. I am currently using windows with 4 GB of ram. I'm unable to use one of these applications without lag.

    Now, I am planning to buy I have Mac. Can you suggest me a particular iMac where I can run these applications without any Lag?

    This has nothing to do with your hardware, it of just about bugs and code of 'bad '. Get a Mac, one even more powerful will change nothing of all this, especially given the limited available GPU acceleration options there. The only real truth is that you need more RAM. The rest belongs to Adobe fixing the bugs all over damned and specific program requirements.

    Mylenium

  • Get the error 148: opening of any application.  Restart without help

    Get the error 148: opening of any application.  Restart without help

    Hello

    Please visit:- https://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html

    I hope this helps.

    Kind regards

    Vivet

  • How can I know the name of the user-Claude without any password to a blocked telephone

    I have format my ios iphone 5s 9.1 can rephrase and he asked me the user because I the cloud how will I know that the name of the Cloud user without any password

    Did you buy this iPhone of someone else or did you for awhile? If you bought one, you need to contact them and have them remove the phone from their account so that you can use it. If you logged in before that you just need to try to remember of the apple which was signed in the phone ID and then see if you know the password. If you don't remember the password you can reset it to https://iforgot.apple.com/

  • Block number / call rejection?

    Sony Xperia M4 Aqua / new phone...  Look for link to reject a call / block the phone number? Help appreciated, thanks to soon...

    You can only save the contact and direct all calls to your voicemail or use an application of part 3 for unregistered numbers. It took a lot:

    https://talk.sonymobile.com/T5/Xperia-M4-Aqua/how-to-block-a-certain-number-in-M4-Aqua/m-p/1044465#M...

  • DBMS_SESSION exception without any error

    Hello

    I cloned an Oracle 9.2.0.6 production database for test. We have cloned the database in the past using the same procedure without any problems. However, this time he gave problem form 6i and form 10g.

    When the procedure DBMS_SESSION.is_session alived or dbms_session.is_role_enabled, he always exception. I created a form a button that runs this code:

    PROCEDURE DBMS IS
    test BOOLEAN: = FALSE;
    BEGIN
    msg_info ("this message before running '");
    test: = DBMS_SESSION.IS_ROLE_ENABLED ('CONNECT');
    msg_info ("If you see this message, code run successfully");
    Exception
    while others then
    msg_info ("If you see this, code was NOT executed '");
    END;

    -clone db output: If you see this, the code did NOT
    -output in any db: If you see this message, code run successfully

    However, if I run this form using any other database it run successfully. If I point to this new database of clone, it has always attracted exception with no reason.

    Anyone know how to fix this?

    Is it possible to have the form to post an error message that would help us solve the problem?

    I am completely new to the form. I'm a database administrator.

    Note: dbms_session.is_role_enabled run OK in the clone database if using sqlplus:

    BEGIN
    IF dbms_session.is_role_enabled ('CONNECT') THEN
    dbms_output.put_line ("'CONNECT is granted");
    ON THE OTHER
    dbms_output.put_line ("' the CONNECT is not given");
    END IF;
    END;

    -output: CONNECT is granted

    Thank you very much for your help.

    Sound - Interesting DR. I use the form 10.1.2.0.2. Can you give me the steps?

    There are two modes of operation of the DRA. First, on the application server and then the forms generator. The setting is the same for everyone, but the first configures the application server and then configure your workstation. You must change the following two files: default.env and formsweb.cfg. These two files are in the \DevSuiteHome\forms\server directory.

    default.env
    Add or change the following variable:
    FORMS_TRACE_DIR =

    I'm writing my logs in the directory \NETWORK\log for my entry looks like the following:

    FORMS_TRACE_DIR=\NETWORK\log
    

    formsweb.cfg
    Add or change the following variable:
    otherparams = log out = =

    I use a generic log file name, but you can use a name that makes more sense.

    I recommend you put it where you want only, the session of forms written in a log file. Also, if you're this change on the application server, I recommend that you create a custom in the formsweb.cfg configuration so it is enabled only when you pass the config parameter in the URL of the application. For example, I created a configuration called my_frd that allows me to run the Dr FUND by adding *? config = my_frd * to the URL. Here is an example of the changes that you need to do.
    1. open the formsweb.cfg file and go at the bottom of the file. Then add the following text:

    [my_frd]
    otherparams=record=collect log=frd_trace_log.txt
    

    Now, when you run your application, you simply add? config = my_frd to the url to activate the trace FRD file. For example, if your application URL:

    http://.com:8889/forms/frmservlet

    What would be your URL to allow the DRA:

    http://.com:8889/forms/frmservlet?config=my_frd

    Hope this helps,
    Craig B-)

    If someone useful or appropriate, please mark accordingly.

    Published by: Silvere November 1, 2011 13:58

  • How can I create a group through Outlook without the application Outlook email?

    How can I create a group by using Outlook without an application Outlook email?

    Sigmalambda wrote:

    How can I create a group by using Outlook without an application Outlook email?

    It is difficult to understand what you're trying to do. You can create a group and send an email to the group in any mail client. The recipients can use any e-mail provider or an e-mail client to receive e-mail. Please explain in more detail what you are trying to accomplish.

  • cannot answer calls without closing messages

    I am unable to respond to calls when an SMS or an email came. I tried to change all my alert settings, and it makes no difference, I can't always answer a call without closing all unread messages and emails. any suggestions?

    I don't understand what your problem is. Do you want to say that, if you are looking to Messages or mail, you can not answer a call?

  • 7.10 Skype crashes when he takes a call to any contact

    OK my Skype crashes on call for any contact.

    I tried to uninstall/reinstall but still accidents

    Event log manager error:

    Name of the failing application: Skype.exe, version: 7.10.0.101, time stamp: 0x55e99095
    Name of the failed module: KERNELBASE.dll, version: 10.0.10240.16384, time stamp: 0x559f3b2a
    Exception code: 0xe0fafac1
    Offset: 0x000b3e28
    ID of the process failed: 0x10c4
    Start time of application vulnerabilities: 0x01d0f4b254c8cdee
    The failing application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
    Path of the failing module: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
    Report ID: 15c2f2af-e143-464d-9041-59c2e74069b6
    Faulting full name of the package:
    ID of the failed package-parent application:

    Uninstall the virtual video capture device of XSplitBroadcaster

    Video Capture sources:

    XSplitBroadcaster 0 x 00200000, 0, 1,

    You can uninstall this device using this tool to VCamFix:

    http://community.Skype.com/T5/Windows-desktop-client/Skype-crashes-when-calling-or-receiving-calls/m...

  • L750 satellite crashes randomly without any warning

    It's my first post, sorry if I have something to leave out!

    My laptop is about 3 years old now.
    Recently, he has been crashing without any kind of warning at random times.
    There is not yet any winding down of the sequence; everything stops.
    The battery will not even flat, it still has left power when I reboot.

    I'm pretty sure that this is not a problem with my battery like I had replaced him only months ago.

    It could be a problem with my charger, except sometimes it happens when I'm running on the battery.

    I'm sorry if it's not good to go, but it doesn't seem to be many clues about why this happens.
    If you need more information to help, please ask!

    Laptop may crash because of different reasons:
    (1) system problems
    (2) hardware problems

    In case of system problems, the recovery of the laptop could solve the problem
    I think that this should be done before you try to fix the notebook using other methods.

    In the event that recovery does not solve your problem and if the laptop would break even, well, in this case a hardware problem would be possible.

    Possible hardware problems could be: memory or the motherboard.
    But in general, it could be any part and, therefore, it of always difficult to say what could be the problem more often than the laptop engineer start a hardware diagnostic procedure that would check each part after that its possible to say exactly what's wrong.

    Also a high internal temperature may affect the functionality of the laptop.
    This can happen when the cooling fan and the grills are clogged with dust.

    I clean my notebook from time to time using a jet of compressed air. This allows to get rid of the dust. You can also use a vacuum cleaner, but should be careful don't empty too hard. This can damage the cooling fan

  • Satellite L300 - 17L goes into stand-by all the time without any reason

    Hello Eldorado,

    I'm sorry this isn't a question in relation to the subject, but I have L300 - laptop 17L and from time to time she stops (specifically put it yourself in stand-by) without any reason.

    It is not the cooler or something else...
    The battery is full, and what happens while I'm writing or working on the laptop computer in general!
    Local service says it's nothing wrong with the laptop, I'm so nervous, I can't work, it's interrupting my work...

    PLEASE HELP ME! Thank you

    Hello

    What happens exactly?
    Is - what the laptop stops or go in mode sleep?

    You said it happens from time to time, this means that it is not easy to reproduce this problem, and I think that the technician was not able to reproduce this is good?

    What applications are running if this happens?

    Have you tried to restore the laptop to factory settings using the recovery disk or recovery disk? Do this!
    Also check if your BIOS is up to date!

Maybe you are looking for