Block of sous-schemas to run in parallel

I'm still new to LabVIEW, if this question is very probably stupid. But I am a little confused by the basics.

We have a hypothetical test facility. To begin a measurement of what I need:

1. turn on a couple of power supplies;

(2 light up a cold room and set the temperature);

3. While the temperature is defined but strictly after turning on the power supplies I need to do some upgrading/calibration with a couple of generators and a couple of power meters, and I want orders for such equipment must be sent at the same time.

Well, LabVIEW is good in there, there are many structures I use to run this sequence: power meters installation... then other equipment orders. I can use the sequence of dish. Can I use nested case structures. But my question is: is there some way to just combine some sous-schemas to make them run together?

To be more precise: I like the "place structure" for his appearance and behavior, but the description in the help leaves confused me a bit, if it's a good fit. Maybe there is a structure better?

There are some ways more enjoyable to do things become more complicated, but essentially, this is what it looks like.  You can group certain Interior set VI a structure like below to ensure that they are made together.

Tags: NI Software

Similar Questions

  • order of sous-schema label z

    Is there a way to put the order of labels sous-schema plan? I realize threads I create will run under them, instead of course, leaving a Visual 'pause' in the thread.

    I'm sure that there is no way to change it... subdiagram labels will always be on top of son.

  • With the help of DAC for running no BIApps infa jobs n 2 EP running in parallel

    Hello

    We already have configuration BI Apps prod environment using DAC, Informatica and OBIEE 11 g for one of our customers.

    Now, we want to check the possibility of using the DAC for the execution of BIApps no informatica related jobs.
    (That we had only a week of the execution plan of DAC weekend and Informatica and DAC are inactive most of the time during the week)

    Customer wants a separate new small datamart be configured which meet the requirements of statement for different departments and has no links of kinship or any link with existing BI Data Warehouse applications.

    I just wanted to check if it will violate the license terms (if we use CAD to workflows not BI Apps and run another EP)?

    In addition, the DAC Build 10.1.3.4.1 is capable of running two parallel execution plans?

    We have heard long back that two parallel feature EP will be lunched in the version 11g CAD. Pointers or new in this space?

    Thanks in advance,

    From what I remember, you cannot load a 'distinct' DB instance that is NO OLIVIER. If you create a small custom datamart on the INSIDE of the OLIVIER exitsing schema, then it is acceptable. However, if you use DAC (no matter if its plan one or two plans) to load a NON-OBIA target, this may violate the license agreement. You need a self-contained separate license for Informatica and use the planner of Informatica tool. If you want to use DAC, ensure that your target is inside the DW OBIA.

    Pls correct brand...

  • List of jobs run in parallel

    Hello
    I use DBMS_FILE_TRANSFER. PUT_FILE as part of my portable from tablesspace shell script
    my intermediate dwh instance to my instance of dwh report.

    The problem is that I face the data files after one.
    There are about 20 files of data, and each of them is 10 gigabytes in size.
    I would like to copy the files in parallel and not after one.

    I thought to create dynamically 20 jobs/Scheduler (based on the number of data files) and all run togther.
    This way I could actually run in parallel.
    Bellows is part of my TTS shell script.
    The for loop generates the list of data files that I need to copy.
    the DBMS_FILE_TRANSFER. PUT_FILE copy one after one.

    Can you suggest how can I changed the plsql block below to create
    and present in parallel a job for each data file?

    Thank you.
    sqlplus -s "sys/${SourceSysPass}@${SOURCE_ORACLE_SID}  as sysdba" << EOF 
    whenever sqlerror exit 1
    declare
       v_link varchar2(30);
    begin
      select db_link
      into   v_link
      from   dba_db_links 
      where  db_link like '%TTS%';
    
      for x in (  select  fname, ltrim(rtrim(substr(fname,1,instr(fname,'.')-1)))||'_'||rownum nf_name
                  from   (select substr(file_name,instr(file_name,'/',-1)+1) fname 
                          from   dba_data_files
                          where  tablespace_name in ('${TableSpacesList}') 
                          order by file_id)
               ) 
      loop
           DBMS_FILE_TRANSFER.PUT_FILE('source_tts',
                                       x.fname,
                                       'target_tts',
                                       x.nf_name,
                                       v_link);
      end loop;
    
    
    exception
    when others then
        raise;
    end;
    /
    EOF

    Hello

    I'm happy that it worked. Don't worry, in this case, this setting is not necessary

    Kind regards
    Christian Balz

  • Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers.

    Have Windows 7 running on Parallels Desktop with a Mac. Get "setup.exe is not a valid Win32 application" when trying to download a program with Windows Explorer. I can download from these sites with Vista and XP with other computers. Now, I can't download the programs that are supposed to solve the problem! including FoxFire

    Try to download from this site:

  • You need to pass arguments to the Sub - VI which runs in parallel to the main vi.

    Please help me.

    I can pass arguments to a subvi using "call-by-reference-node" but the sub - vi will not work in parallel.  I can also run my sub - vi in parallel using "invoke the node", but then cannot pass arguments.  I can't understand how to merge these two concepts.

    When I open the reference VI, I specify the strict type, using call-by-reference-node.  When I use call node, I don't specify the type.  It seems that specifying the type strict guard screw run in parallel, but also seems necessary to pass arguments.

    I apologize for my absence of a deeper understanding of this and appreciate any help you can give me.

    Chris

    You must invoke 'Ctrl Val.Set' node.

  • Prerequisites for reentrant SubVIs to run in parallel

    Hello!

    In my VI, two clones préallouées of a Subvi, I thought I would go in a separate thread of each. Just this sub - VI contains a reference to a double and it increments. The two clones ran in parallel, but not in separate threads. For comparison, I did a Subvi, which does not have a reference - these clones run each in own thread.

    I noticed this watching the CPU usage: in the first case, has been used as a single core in the second respectively two sons were used.

    (1) I wonder what are the prerequisites for a Subvi to run effectively not only in parallel, but in fact in separate threads?

    (2) is there a way to discover during compilation which (Tufts) parts of a VI run in parallel, and SubVIs get making their own thread of execution?

    For reference: the execution is slow. If I understand correctly, the GUI is running in its own thread, so no interfering only not with the SubVIs that multiply references. I think that there is also no locking a reference readings and writings to a reference should be very fast. Is this correct? If so, why is this slow running?

    Thanks for your replies

    Marco

    (The test computer has a Quad-Core with Hyperthreading, using LabVIEW 2012SP1)

    One thing I know is if you have any manipulation of the UI elements.

    In the case you use a reference to a UI element user and properbly using the property node to insert data.
    This limits LabVIEW for your sub vi of in the UI thread.

    If you have transferred the values on the queue to a vi that manages all the user interface controls, then only that vi will be in the UI thread.

    Who is?

  • sous-schema

    Hi all

    I have a question about the "business structure."

    I want to use a control "Tab" to select different sous-schemas in the structure of the case, and each sous-schema is labeled by string, such as 'tension', 'current' and 'power '.

    But it always shows errors:

    Structure of the case: selector values have bad type

    Structure of the case: no case for selector values.

    I was wondering how to solve this problem. Thank you.

    Well, you don't really have to do it either. A tab is an enum, and all you have to do is connect to a switch case. Do not type anything in the value box. He will automatically name the cases.

  • the label of sous-schema multiple line bug?

    Label sous-schema not be retractable at the time where the deletion of a line. I am doing it wrong or is this a bug?

    I've just updated to Labview 2013SP1

    Yes, looks like a bug... perhaps.

    Of course, you can simply grab the handle in the middle of the lower edge of the sous-schema label and resize it to where you want.

  • Upgrade to esxi 6 - running in parallel 5.5 versions Enterprise

    Hello together,

    We want to improve our Enterprise 5.5 to 6.0 Enterprise environment more.

    Can we run in parallel business with Enterprise 6.0 5.5 more ESXi hosts.

    or

    We can add the license keys for the company more than 5.5 to existing hosts without any configuration problem, then

    upgrade the esxi hosts to 6.0?

    Thank you

    There is no problem, but I recommend to keep this scenario only during migration.

  • Can't run in parallel Invoke VMScript

    Hi all!

    I create script that convert model VM, and then run VMs converted, then Invoke VMScript. After that my script restart, stop this VMs and VMs convert to patterns.


    All operations of this I have run in parallel mode of powershell.


    But when my script tries to run Invoke-VMScript in parallel mode , my script freezes on this operation. I see only - 'Inline Script runniung'


    But if I open one of the virtual machines, I see my local script on the VM run command and it's done.

    In VM events, I see the same, command done VMScript Invoke.


    How to solve this problem? What I've done wrong?


    Thanks in advance!


    My script:


    function Load-PowerCLI

    {

    Add-PSSnapin VMware.VimAutomation.Core

    Add-PSSnapin VMware.VimAutomation.Vds

    }

    Load-PowerCLI

    # Connect to Vcenter

    $vcenter = "vcenter.domain.local"

    function Connect to Vcenter

    {

    SE connect-VIServer-Server $vcenter

    }

    SE connect Vcenter

    function Unload-PowerCLI

    {

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    Remove-PSSnapin VMware.VimAutomation.Vds - ErrorAction SilentlyContinue

    }

    # Download the list template

    Function Get-FolderFromPath

    {

    (param

    [String] $Path

    )

    $chunks = $Path.Split('\')

    $root = get-View - VIObject (Get-file-name $chunks [0])

    If (-$pas?) {return}

    $chunks [1.. $chunks. Count] | % {

    $chunk = $_

    $child = $root. ChildEntity |? {$_. Type - eq "File"} |? {(Get-Folder-id ("{0}-{1}»-f ($_.)"))} Type $_. (Value))). Name - eq $chunk}

    If ($child - eq $null) {throw "File '$chunk' not found"}

    $root = get-View - VIObject (Get-Folder-Id ("{0}-{1}" f ($child. ")) Type, $child. Value)))

    If (-$pas?) {return}

    }

    return (Get-Folder-Id ("{0}-{1}" f ($root. ")) MoRef.Type, $root. MoRef.Value)))

    }

    $Templateslist = (get-FolderFromPath-path 'DC\Templates\Windows' |) Get-model? ({$_.name - eq 'TEST'}). name

    $Templateslist

    # Convert templates of virtual machines

    workflow convert-models-to-vm {}

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $user,.

    [string] $pass

    )

    for each-parallel ($template in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Entire-Template - Template $Using: model ToVM.

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    Convert-models-to-vm - $Templateslist - vcenter $vcenter models - session $global: DefaultVIServer.SessionSecret

    # PowerOn VMs

    workflow poweron-vms {}

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $user,.

    [string] $pass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Start-VM - VM $Using: vm | Waiting-Tools

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    PowerOn-vms-models $Templateslist - vcenter $vcenter - session $global: DefaultVIServer.SessionSecret

    # Wait 1 minute

    sleep of the 1960s

    # Run the command update Script

    {of workflow run-update

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $script,

    [string] $guestuser,

    [string] $guestpass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Invoke VMScript - ScriptText ' $Using: script "-VM" $Using: vm "-Server" $Using: vcenter '-GuestUser ' $Using: guestuser '-GuestPassword ' $Using: guestpass»

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    $script = "c:\update.ps1".

    $guestuser = "administrator."

    $guestpass = "myPASS".

    Run-update - $Templateslist - vcenter $vcenter models - session $global: DefaultVIServer.SessionSecret - $script - $guestuser guestuser - guestpass $guestpass script

    # Restart virtual machines

    workflow restart-vms {}

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $user,.

    [string] $pass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Restart-VMGuest - VM $Using: vm | Waiting-Tools

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    restart vms models $Templateslist - vcenter $vcenter - session $global: DefaultVIServer.SessionSecret

    stop # VMs

    workflow stop-vms {}

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $user,.

    [string] $pass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Stop-VMGuest - VM "$Using: vm '-confirm: $false

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    stop-vms-models $Templateslist - vcenter $vcenter - session $global: DefaultVIServer.SessionSecret

    sleep 120

    # Convert models of virtual machines

    {to convert vm-to-model of workflow

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $user,.

    [string] $pass

    )

    for each-parallel ($template in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Set-VM - VM "$Using: model"-ToTemplate-confirm: $false

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    Convert-vm-to-models - models $Templateslist - vcenter $vcenter - session $global: DefaultVIServer.SessionSecret

    Unload PowerCLI

    The problem in this part:

    {of workflow run-update

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $script,

    [string] $guestuser,

    [string] $guestpass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Invoke VMScript - ScriptText ' $Using: script "-VM" $Using: vm "-Server" $Using: vcenter '-GuestUser ' $Using: guestuser '-GuestPassword ' $Using: guestpass»

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    $script = "c:\update.ps1".

    $guestuser = "administrator."

    $guestpass = "myPASS".

    Run-update - $Templateslist - vcenter $vcenter models - session $global: DefaultVIServer.SessionSecret - $script - $guestuser guestuser - guestpass $guestpass script

    I found the solution!

    I just add this string - $WarningPreference = "SilentlyContinue" in an inline script

    Like this:

    {of workflow run-update

    (param

    [string []] models of $,.

    [string] $vcenter,

    [string] $session,

    [string] $script,

    [string] $guestuser,

    [string] $guestpass

    )

    for each-parallel ($vm in $templates)

    {

    $run = {InlineScript

    $WarningPreference = "SilentlyContinue".

    Add-PSSnapin VMware.VimAutomation.Core

    SE connect-VIServer-Server $Using: vcenter-Session $Using: session

    Invoke VMScript - ScriptText ' $Using: script "-VM" $Using: vm "-Server" $Using: vcenter '-GuestUser ' $Using: guestuser '-GuestPassword ' $Using: guestpass»

    Remove-PSSnapin VMware.VimAutomation.Core - ErrorAction SilentlyContinue

    }

    $run

    }

    }

    $script = "c:\update.ps1".

    $guestuser = "administrator."

    $guestpass = "myPASS".

    Run-update - $Templateslist - vcenter $vcenter models - session $global: DefaultVIServer.SessionSecret - $script - $guestuser guestuser - guestpass $guestpass script

  • Concurrent program is not running in parallel

    Hello

    There is a simultaneous custom program that must be run in order, sometimes and sometimes it should be able to run in parallel. The program was defined initially to be incompatible with itself and it is used to run only in sequence, as planned, but when the incompatibility with the self has been deleted or disabled can still, he runs in the order but does not run in parallel. What could be the reason?

    As a temporary solution, I tried to remove the simultaneous program and recreate and defined without any inconsistency and it works in parallel. But it won't help the incompatibility could be switched on/off often enough and recreate the simultaneous program every time is not a good idea.

    Thanks in advance.

    Kind regards
    RAM

    There is a simultaneous custom program that must be run in order, sometimes and sometimes it should be able to run in parallel. The program was defined initially to be incompatible with itself and it is used to run only in sequence, as planned, but when the incompatibility with the self has been deleted or disabled can still, he runs in the order but does not run in parallel. What could be the reason?

    The CM has been revived after doing the above?

    As a temporary solution, I tried to remove the simultaneous program and recreate and defined without any inconsistency and it works in parallel. But it won't help the incompatibility could be switched on/off often enough and recreate the simultaneous program every time is not a good idea.

    Whenever you toggle incompatibilities, please make sure that you bounce the CM.

    Establish rules of incompatibility for Custom Reports [107224.1 ID]

    Thank you
    Hussein

  • Running in parallel to the interfaces

    Hello. In the package of the ODI, I can locate my interfaces and join each two of them in two lines: 'ok' (successful) and "ko" (unsuccessful). So I get a sequential execution of these interfaces. How can I make ODI run in parallel?

    To do this, create a scenario for each of the interfaces (right button of the mouse on the interface, generate scenario) and drag the scenario on the package, and not the interface. This will give you a script to execute tool, which you set to execute asynchronously. run each of the interfaces and then use an OdiWaitForChildSession tool to wait for the complketion of the child sessions. If only some of the tasks that you run asynchronously are on the critical path, you can use tags when you start the executions and the tool of waiting. For those who are on the critical path, give a keyword CP. The tool to wait, wait with the key word CP.

  • run in parallel sql statement block

    Hello
    I'm looking for a way to run 2 blocks from the sql statement at the same time in sqlplus

    Block1
    drop table CTSGLOB_TABLE;
    create the table CTSGLOB_TABLE select * from CTSGLOB_VIEW;
    create index TEMPS_CTSGLOB_IDX ON CTSGLOB_TABLE("TEMPS");
    create index ORGA_CTSGLOB_IDX ON CTSGLOB_TABLE("ORGA");
    create index RUBSRH_CTSGLOB_IDX ON CTSGLOB_TABLE("RUBSRH");

    Block2
    drop table CTSGLOB_TABLE_2;
    create the table CTSGLOB_TABLE_2 select * from CTSGLOB_VIEW_2;
    create index TEMPS_CTSGLOB_IDX_2 ON CTSGLOB_TABLE_2("TEMPS");
    create index ORGA_CTSGLOB_IDX_2 ON CTSGLOB_TABLE_2("ORGA");
    create index RUBSRH_CTSGLOB_IDX_2 ON CTSGLOB_TABLE_2("RUBSRH");

    I know that I can open 2 client session to run, but I would like to know another way.

    Best regards
    Jean-Marc

    Well, that depends on what you mean exactly when you say "run 2 blocks from the sql statement at the same time in sqlplus '...
    You can also copy all statements in a sql script and run that, just.
    If this isn't what you want, then please explain why.

  • Two Partitions of disk for both systems or running under Parallels

    I have a 27 "Quad core i7 with 8 GB and 1 hard drive I partitioned the hd in 2 partitions: the boot partition has OS X-Yosemite and works very well. However there are occasions when I need to run OS X - Snow Leopard because some devices that I need to use are not compatible with Yosemite because there is no update for the OEM driver. Frankly I do not have the budget to upgrade the devices, so I need a workaround solution.  Is the drive of the 2 score or running 2 OS under Parallels the best solution? Help, please!

    Thank you

    Joe has.

    If the system can operate in native mode of SL (outside of the virtual machine), there is nothing wrong with it.  I currently have a 480 GB SSD with 240 GB Mavericks and my original SL on another partition of 240 GB.  You have to keep 2 backups, one for each system, but that is expected.

    On the other hand, if you want both running at the same time, use VM.

    VM is usually a puzzle that I reserve for Linux and Windows that need special 'hooks' to run on an Apple and are easier to exploit, because I didn't need "both running simultaneously.

Maybe you are looking for

  • FM radio for iPhone 6s without WiFi/streaming etc.

    Is there a solution to this problem? The Griffin ifm works with iOS 9.2? Why does mijn 12 years old phone has an en radio fm very expensive iPhone does not work? I'm not getting it. I need help with that. I want to listen to the radio like in the goo

  • Unable to communicate with the printer hp deskjet 1000

    I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot comm

  • Rohde &amp; Schwarz PNR Z81 wattmeter booting is not in Labwindows CVI

    Hi, I have problems with initialization of my R & S NRP Z-81 using LabWindows electricity meter. LabWindows detects the power meter and when the SSessionInfo typedef struct is called the value Boolean IsPulseMeasurementOn is true. But I'm stuck in an

  • Caller does not hear me on a voice chat with Skype.

    I have a problem wth Skype. Caller does not hear me. Microphone is activated.

  • How do we uninstall ammyy?

    These Techaviators Global guys are really smart. They contacted me. Let them run my computer by remote control using ammyy, remote control program.  They did a lot of work on the computer all morning and it works a treat now.  but I get the signal th