blocked sfdrvup.exe (Windows7), UberSoldier cannot start, I need your help please

Similar Questions

• Userinit.exe WINDOWS VISTA cannot open a session! Help, please

  I've accidentally disabled and removed userinit.exe thinking it was a virus of our pc at home. I created a Vista recovery disk to try to restart and copy the file by using the command line option in the system recovery console.

  I had no luck trying to use some commands that I found online. All solutions are for platforms which are not vista. Can someone help me please?

  I can't connect to all accounts because of this problem.

  Hello

  a Vista recovery disk?

  of neosmart?

  It's only for repair system, System Restore, etc. don't replace only not system files

  read this

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair System Restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• buy an iphone 5s by amazon and I came with iCloud blocked an account... {I called the seller and does not that I do that I'm from Venezuela please need your help}

  buy an iphone 5s by amazon and I came with iCloud blocked an account... I called the seller and does not that I do that I'm from Venezuela please need your help

  No one here can help you. The device is locked activation. Since you have made the purchase by Amazon, you can check with them to see if they will stand behind it. No one on the forum, or Apple can help you remove the lock. Only the previous owner can do this. I suggest that you demand a refund, so let's start a claim with Amazon about this dealer.

• Adblock Plus working on main identitiy, stopped on the other profile, when I try to download it on another identity, "firefox cannot change the file'message.help please"

  don't know why, but the block of adplus works do not on the other account. When I tried to download it again, he says firefox can not complete... can not modify the file, help please, the amount of the pop ups and ads and the size of them is annoying to say the least. Thank you

  It is possible that there is a problem with the files that store the registry extensions.

  Delete the files (extensions.sqlite, extensions.ini, extensions.cache) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.

  • https://support.Mozilla.org/KB/profiles

  New files will be created if necessary.

  See "extension corrupted files:

  • http://KB.mozillazine.org/Unable_to_install_themes_or_extensions
  • https://support.Mozilla.org/KB/unable+to+install+add-ons

  If you see disabled extensions, is not compatible, in "tools > Modules > Extensions ' and then click the Tools button, on the left side of the search bar (or click on the"Find updates"button in older versions of Firefox) to check if there is an available update compatibility.

  If that didn't help then also try to delete the file addons.sqlite.

• NEED of HELP PLEASE :) - trying to install win7 on HP Pavilion G7 - cannot circumvent screen UEFI

  I have a laptop HP Pavilion G7.

  Hard disk - 500 GB Seagate SATA

  HP product ID - D1C31UA #ABA

  Here is what happened.

  replaced the screen cracked with new screen

  noticed laptop was suspended at startup and just kept turning it back on.

  took out RAM, dvd rom and battery then put them all back in... Still the problem persists.

  removed the hard drive and backed up all the important files.

  No disk recovery Win8 available - No Win 8 Installation Disc available

  Hard formatted using PC with the laptop connected via jumper USB hard drive.

  Formatted all Partitions

  re-installed a hard drive formatted in laptop

  Win 7 Installation disc on DVD Rom

  laptop kicked

  Consultation: BIOS

  Active LEGACY support

  Back of CD/DVD-ROM first in the initialization of the list of commands

  F10 to save and exit

  Enter 4 digit Code go to confirm the BIOS change

  Restarting the laptop

  UEFI starts again automatically at STARTUP

  the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

  the display shows prepare auto repair and diagnose your PC... stops and starts again

  the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

  How can I disable UEFI so that I can boot from the CD/DVD-Rom to install windows 7?

  Help, please.

  Thank you

  could not initially install Win7 - problem found and solved.

  BAD CD/DVD-ROM

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• The application could not start error 0xc000007b URGENT HELP PLEASE

  Hi a few weeks a go I started getting an error (The was unable to start correctly 0xc000007b Application error click OK to close the Application)

  and I was looking for a solution since but nothing works and I don't want to reinstall my windows yet I only met the error when you try to start some games I've tried
  The difficulty of Cmd/sfc and I tried to reinstall Microsoft Visual C++ Redistributable Packages 2010 and sp1 and I can't make them work
  Windows 7 Ultimate X 64
  Could you please help me

  Thank you for your help, I tried to completely uninstall Microsoft redistributable and then I just reinstalled directly from microsoft, I think it was a corrupted update which screwed things anyway thanks for your help

• Windows cannot start. Need help

  Hi, I have a problem and I hope someone can help me out.

  My laptop (satellite) could not suddenly start, saying that the following file is missing or corrupt:

  "windows\system32\config\system.
  You can try to repair this file by starting windows setup using the original configuration of the CD-ROM.
  Select 'r' in the first screen to start repair. »

  But my laptop had an in this case, OEM facility that must have the Toshiba Recovery CD instead. They do not have the recovery console have, this have standard mode which re - install the system as it was when the laptop was first released and have expert mode which I don't want to do, but have no instructions.
  I don't want to format the drive beceuse my data is very important.
  How to start windows without re install it and formatting my computer.

  Sorry for my English...
  With respect,

  Hello

  First of all, you can try to start in safe mode. If it is possible, then you can use the System Restore tool to restore the operating system to the start time.
  Is it is possible to doesn t, so you can use the recovery CD to recover the operating system. In this case, you can use the expert mode to recover the operating system.
  But be care: the partition will be formatted.

  Good bye

• Need to do a system restore. When the computer starts and I cannot access the BIOS menu - help please... (WinXPSP3)

  I need to change the boot order, so the installation CD starts first-I can't enter the Bios at Startup Menu.

  It's a HP Pavilion that says F1 is supposed to allow me to access the menu of the BIOS at startup.  I also tried:

  Tip There are other keys that provide access to the BIOS. They include the following:

  o F1

  o F2

  o F10

  o, CTRL + ENTER

  o ALT + ENTER

  o, CTRL + ALT + ESC

  o, CTRL + ALT + INSERT

  And kay LED does not work either.  It's Windows XP - 32 bit home.

  Service Pack 3 is installed - SpySweeper is anti-virus and using the Windows Firewall.  This computer were of Trojan horses (40) and finally the browser was re-directed.

  Thanks for any help.

  It shud be a Hp tool installedon your system with which you can edit boot options even after logging on to XP.

  Its something like HP or Credential Manager protection tools.

  Maryse Agarwal

• Re: Qosmio G - RecordNow cannot start CD «all your drives are set to disabled people»

  Hello
  How can I get RecordNow (from Sonic) to work?
  I'm trying to play CDs, but get «all your drives are set to disabled people»

  BR Lars

  Hello

  Computer laptop Qosmio and OS do you have?
  Sonic RecordNow was preinstalled on your laptop? On my Qosmio F50, it is Toshiba Disc Creator pre-installed.

  However, have you tried other software like Nero or CD Burner XP burning? Furthermore, a few weeks ago, I tried CD Burner XP. I was very surprised. It s a very small (only a few megabyte s) tool and all the important features are built into this program. And it s freeware!
  If you n t want another burning software you should try reinstalling the file now.

  Last but not least is your CD/DVD drive recognized in device properly Manager without yellow exclamation points?

  Good bye

• my windows 7 is genuine, but when I tried to start double with windows xp it says windows7 is not authentic... Help, please.

  I am using windows 7 ultimate.i tried using Windows 7 and xp dualboot but the xp installation was unsuccessful and when I connected the win 7, it says "copy of windows is not genuine" Please help me.

  Your BIOS SLIC table seems to be missing - for which version and edition of Windows is the licensed computer, according to the COA sticker on the case (or inside the battery compartment)?

  You can change to the key on the COA sticker (if that's the same edition) using the link at the bottom of the system page properties: follow the instructions.

• nslookup works, but ping fails by hostname (works of intellectual property). IE cannot display this webpage. Help, please!

  Cannot access Internet on my laptop with Windows XP SP2 installed; uninstalled firewall; Microsoft Security Essentials (AV) installed

  ipconfig/all shows a 192.168.x.x ip address to my ethernet card.

  TCP/IP properties are set to "Obtain an IP address automatically" and "Obtain DNS server address automatically."

  I am able to search names and ping by ip address but cannot ping by hostname. When I try to navigate through a Web site, it displays the message "Waiting for http://xxx.xxx.xxx ' in the status bar, but fails to load the Web page.

  I tried a few sites by their IP with the browser, for example 212.58.244.143, and IE was able to load the Web page (without any objects of course requiring name resolution).

  Able to ping loopback (127.0.0.1) as well as the computer by its name (which resolves to the ip address is assigned to the).

  ARP - a shows the entrance to the default gateway. Able to ping.

  I did ipconfig/flushdns and / registerdns without effect.

  Even with net stop dnscache and net start dnscache.

  Manually reset TCP/IP too by following the instructions here.

  Also used "netsh winsock reset catalog" according to the guideline here.

  Running out of ideas here... could someone please advise what to do? Or what additional information it would take to solve this problem?

  I met the same problem on win7. I also tried each solusion what you tried.

  In the end, I reinstalled the tcp/ip stack and solved this problem. Try the following steps:

  1 remove

  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock
  HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Winsock2

  2 reset

  3. right click on the network connection and then click Properties. Reinstall the protocols of the disc. The location is 'C:\Windows\inf '. Choose the «ipv4...» "and"ipv6 ".

  4 reboot

  Everything is ok.

  Good luck!

• Cannot rotate the Photos! Help, please

  I can't turn my photos.   I have most of my photos on external hard drives.  When I try to turn them (per click, open in paint or open them in Windows Photo Viewer) Windows 7 don't rotate.  Instead, I get an error message indicating that "you can not turn this image. The file may be used or open in another program, or the file or the folder may be read-only. "I tried to give my complete access to the user account on the external drive, and I also tried to score the file, the folder and the only readable drive.  He's going through and looks like it is something, but in the end, I always get the error message.  I can turn them if they are on the C: drive, but my C: drive is too small to hold my collection of photos...  Help!

  I just installed Windows 7 Professional 64-bit, and I couldn't turn one of the photos on my internal hard drives. After clicking out of around, I realized what the problem was.

  You must:

  1. click on the start menu.
  2. click on computer.
  3. right click on the drive that gives you trouble.
  4. Select Properties.
  5. click on the Security tab.
  6. click on the Edit button where it says "to change permissions, click on change."
  7. in the "group or user names", click on the user you want to change. On my computer, I had to choose 'Users (computer-name\Users)' at the bottom of the list.
  8. in the area 'Permissions for the users', click the checkbox to allow full control.
  9. click on ok.

  There are boxes popup telling you that it cannot change permissions on some files. Just click ok to continue.

  Repeat these steps on each player that gives you bad.

• I upgraded my Firefox today (February 29) at lunch and now firefox don't even started! ?? Help please!

  I have a huawei ideos s7 and installed Firefox in December. Updated Firefox in January (I think) and it worked fine!
  Today I've updated again and now Firefox launches but immediately closes down.

  Hi again,

  OK, this is a bug in our application, crash starting on your device, here is a link to the report https://bugzilla.mozilla.org/show_bug.cgi?id=699301

  My apologies again for evasive answers. Here's the big list of all the old buildings, so you can get it we hope to work again with former construction, until we have fixed a bug:
  http://FTP.Mozilla.org/pub/mozilla.org/Mobile/releases/

  -Michelle

• Windows 7 system errors, (CdRom "has a bad block") 7 and 5, (general core hive (file):'-?); affecting performance & need interview help please.

  If I have event viewer saying that "the device, \Device\CdRom0, has a bad block" error Event ID 7, this drive will not format a new CD - R disc, although it used to, I'm running Windows 7, no visible filters in Regedit, (although I deleted the drivers and rebooted), System Restore is no longer an option.  However, DVD - RW works fine otherwise.  What I try next?  And that's probably unrelated, but the general kernel of error event ID 5 is the other thing; "I got a Userid on it and more accurate XML details view on it = 'FinalStatus' > 0x8000002a ExtraString' >------? \C:\Windows\System32\config\COMPONENTS corrupt and recovered - some data could be lost "ExtraStringLength"> 41 Guid ="{A68CA8B7-004F-D7B6-A698-07E2DE0F1F5D}?"

  Hello

  I suggest to run the fix tool from the link provided below and check if this can help:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hope this helps,