Blocking incoming MIDI orders

Similar Questions

• How can I publish Windows Home Server web access on one port other than 443? Verizon FIOS is blocking incoming 443 so I'm not able to access the WHS remotely.

  I have Verizon FIOS.  They block incoming traffic on port 443.  I have an ISA Server, but were unsuccessful, redirect to 442 on the listener interface and bypass at 443 internally.

  Thank you!

  Victor

  Hello

  Take a look at this thread who can answer your specific question.

  http://social.Microsoft.com/forums/en-us/whssoftware/thread/8c2238da-c4c7-4777-8CE9-b1bb506daf0f/

  However, if it is not, I would say that to post your question in the forum below.

  http://social.Microsoft.com/forums/en-us/whshardware/threads

• block incoming and outgoing calls for some phones

  Dear all

  I have some phones like the kitchen, to block incoming and outgoing calls to the phones of these kitchen and I want these phones to call only internally. I have E1 gateway H323. How the configuration it will be CSS and Partition?

  Thanks and greetings

  Ideally, you need to two CSSs for this - a CSS gateway and a device of CSS. Type the extension of the kitchen a new partition. Add this new partition to the CSS but not the CSS bridge. In this way the incoming calls are blocked.

  For outgoing calls, you will need to another partition and CSS. The partition must contain the model 9. ! (or whatever your outdoor access code) and should block it. It may be the translation or boss of the road according to the design of your CUCM numbering plan. This model will be assigned to a new CSS called Block_All (or something), and this must be attributed to the level of the line.

• Can block incoming calls from a number?

  We used the blocking calls in the Manager of administration to block some outgoing calls - 900 numbers, 976, etc.. I guess it works. The question I have is if it this or something else can be used to block INBOUND calls. For example, we received, shall we say, a vulgar call. We do want to hear from the appellant in the future. I tried to add my number to test, but I can go very well.
  Based on the documentation, it is not clear to me that it does not block incoming calls.
  Enter a phone number or a model block. For example, to block all calls to the
  858-410-1600 number, enter the number as indicated. It blocks only calls
  place to the specific number is entered.
  Thus, this part specifically calls 'to' this number will be blocked. No mention of calls from this number.
  But then, you can check the box "Outgoing call" to block outgoing calls...
  Check this box to prevent the agents or the Call Center On Demand
  system of automatic reminder to place calls to numbers corresponding to the model
  you have specified. Clear this check box to allow outgoing calls to the numbers corresponding to the
  the model.
  So, why bother with the call-out if adding box it blocks calls to a number (or model) in the first place?
  But, to my immediate problem - then - I block incoming calls?

  To block an incoming call, follow these steps:

  1. create a routing pattern prefix is the number you want to block. One of them will be created for each number block unless you use the AFN or NXX and a wildcard.
  2. create a prefix in the routing group that includes the Microsoft Routing prefix model you just created.
  3. create a new project (or campaign) Menu.
  a. place the default link to disconnect. (You can play an audio first if you wish).
  4. create a new project.
  a. allow a phone project, but do not assign a DNIS.
  b. route all calls to this project from the project Menu has created...
  5 blocking occurs at the level of the project. If the number to be blocked for more than 1 DNIS, make the following change to each of the projects.
  a. open the project in question, and then click the phone tab.
  b. click the routing of Prefix tab and activate the prefix routing.
  c. Select the prefix for the created routing group and that it points to the new project.

  Alternatively, you can make the call blocking since in a campaign, but this requires that each time a new number must be blocked or unblocked, we need to make the change. By using the above steps, the client can add/remove numbers.

  Dave Shuger

• Block incoming traffic not requested by VPN L2L on ASA5505

  I have an L2L work between two locations. Location A and B.

  Location A: 172.16.16.0/24

  B location: 192.168.0.0/24

  I would like to block any incoming pitch A b location which is not initiated from A location. The block must be done on the ASA5505 location a. location B uses a router ISR G2.

  that is A location can start an SSH session to a server at the point B

  Location B cannot start an SSH session to a server in A location

  I tried to use a VPN on the ASA5505 filter but is not dynamic, I can not pass any traffic during its use.

  Config on my ASA:

  vpn-circulation 172.16.16.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0

  access vpn-local block list extended deny ip 192.168.0.0 255.255.255.0 172.16.16.0 255.255.255.0

  access vpn-local block list extended ip allowed any one

  crypto vpn 100 match address vpn-traffic map

  card crypto 100 counterpart set location-public-IP vpn

  card crypto vpn 100 transform-set esp-aes256-sha

  vpn outside crypto map interface

  Group internal vpn-local-political block policy

  bloc-vpn-a-locales-strategie-strategie of group attributes

  VPN-filter block vpn-local value

  Protocol-tunnel-VPN IPSec

  type of tunnel-group location-public-IP-ipsec-l2l

  attributes global-tunnel-group location-public-IP

  strategy-group-by default-vpn-to-local-blocking strategy

  tunnel-group location-public-IP-ipsec-attributes

  pre-shared key *.

  I also have an AnyConnect VPN for the ASA5505 configuration and it runs 8.2 (5). Any tips?

  Hello

  Unless you already have a lot of VPN connections to use theres also another option other than VPN filter ACL.

  You can globally change the "sysopt permit vpn connection" setting (the default is that this option is enabled)

  If you change this setting to "no sysopt permit vpn connection" every connection from remote site will require an ACL rule on the ACL interface that end the VPN. And it's usually the 'outer' interface

  I find its rules in a way easy and clear of the ACL rules for construction VPN connections also although the 'outside' ACL would now include VPN traffic and Internet. It still beats the use of VPN filter ACL if you ask me.

  The downside activating this later is the fact that if you have no restrections between VPN and LAN connections, you would now determine which must be open before you can change the global settings so that connections don't stop working.

  Here is the section of the overview of ASA 8.2 for the order parameter controls / I do not speak of

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/command/reference/S8.html#wp1517364

  If you want to go with VPN filter ACL then follow the earlier instructions of messages while strengthening the ACL rules.

  -Jouni

• I want to block incoming mail when I am absent for 3 months

  I'm going on may4 and I would like to block all incoming emails.i have a gmail account
  his movements.
  Thank you
  Luke

  Well, I think that your in the wrong place. You need to contact you email provider.

• Presence of Cisco 52 profile - need to block incoming calls

  Hello

  We have the entire infrastructure of TP running. All incoming/outgoing calls work correctly of all the video endpoints. but it should block one of the devices video profile 52 incoming calls of the VCSC / VCSE. No one should can not unlocked scope only outgoing endpoint.

  How its possible. Please notify

  Details of TP setting;

  the configured SIP based numbering system. Multiway

  H323-inactive

  TMS is using management endpoints.

  HI Isabelle,.

  Hardware support you are looking for is not on this forum.  However, you cannot block calls from your VCS for an individual endpoint.  This can be managed endpoint itself using the "do not disturb".  Access the Web interface and the function is located under 'Configuration' or 'System Configuration' depending on the version of firmware you have.  Then go to the 'Conférence' option on the left panel, scroll down until you see the section "do not disturb".  Change the timeout to zero and the mode 'on '.  This will tell your end point to block all incoming calls until you manually disable this feature.

  If you need additional support endpoint, please use the right forum or call TP TAC at 800-553-2447.

  Kind regards

  Jason

• Malwarebytes blocking incoming

  Separated from this thread.

  I use Malwarebytes on my computer laptop Windows 7 and every now and then he told me that he blocked an "incoming", and I want to leave it blocked. That's why I asked the question on svchost.exe. Now that I see there is that a lot of them, I'll let this one blocked and to wait and see if I'm missing something.

  Patricia

  Malwarebytes is currently a highly respected software. It is generally not practical to question everything that security software suggests as a threat. It is simpler and safer to accept what he does. Most of the security software provides functionality to send you samples to test. What to do if you want to be happier.

  Svchost.exe is a files of Microsoft which acts as an intermediate host for Windows multiple services. It is normally not a problem, but this does not mean that it is never. More information here:
  http://en.wikipedia.org/wiki/svchost.exe

• Block incoming calls

  Does anyone know how I can block a number of incoming particularly within the IPCC Express Premium 4.0 phone (4)?

  I am currently working on a script where I can put numbers in a XML file to shoot, but I'm having a problem getting the script to a number that is down in the list. Here is my XML Path:

  ' / descendant::PHONE/child::PHONE_NUM1.

  And here is my XML file:

  1112223333 9998887777

  I understand that I have coded XML path to take only PHONE_NUM1 and I have a loop configuration to go back and check the Document XML Get data, but how can I increment the path to look PHONE_NUM2 if PHONE_NUM1 does not match the phone number?

  I have attached copies of the files as well.

  Thanks in advance.

  Use the same method I described in this thread:

  http://Forum.Cisco.com/eForum/servlet/NetProf?page=NetProf&Forum=unified%20Communications%20and%20Video&topic=contact%20Center&CommCmd=MB%3Fcmd%3Ddisplay_location%26location%3D.1ddf1800

  Use only the number of callers instead of the date of the holiday.

  Rgds

  Johnny

• VCS Expressway - Possible use of CPL script to block incoming IP?

  Hello

  Is it possible to control the incoming call to a motorway of VCS on a known IP address? I know that I can block traffic UN-auth/auth as a source alias, but I want to allow incoming calls from only a gatekeeper (s) specific.

  Is this possible? I looked through the CPL of the admin guide section and I don't see anything pretaining to the IP, just alias resolution.

  D.

  Hi Darren,

  I think you can use CPL for this question, however, that you need to block traffic based on a specific source ip address, I suggest you use the built-in firewall of VCS Exoressway, this resource is available in the latest version of VCS, you can create firewall rules in VCS in to allow or deny certain traffic.

  Concerning

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• Cisco VPN Client is blocking incoming connections

  Hello

  I somethimes (not always) a problem with the Cisco VPN Client.

  As soon as the CISCO VPN Client is installed (it must not be running) it blocks inbound connections from the local network.

  The problem is that I use Ultra VNC SC to support some of my clients. Another client is supported by Cisco VPN. With UltraVNC SC customer clients try to connect to my PC.

  But if I installed the cisco VPN Client, no incoming connections are possible.

  How can I change this behavior?

  This behavior is not always the same. Last incoming connections of two months were possible, but from one day to another is not possible more.

  I recently installed the Client, but it takes no effect :-(

  I have NOT activated the firewall Cisco on the VPN Client and the behavior is NOT only if the Client is activated. This is the behavior even if it is NOT active and just installed.

  Hi Chris,

  Zone alarm is installed on the PC that is defective?

  Try to restart the Cisco VPN service and launch the vpn client.

  I remember having a similar problem with the Cisco VPN Client. Some conflict between the VPN client and Zone-Alarm, installed on the same PC.

  The problem was with VSDATANT variables in the registry key.

  Please see the following mail took from another forum:

  http://www.OutpostFirewall.com/Forum/showthread.php?t=9917

• How can I block incoming URLS?

  I'm undesirable Web sites that appear suddenly on my monitor. I want to block them. My guy Norton showed me to go to tools, internet options, then privacy setting. My Tools entry has no internet option.

  I'm confused.

  Aissaoui

  You can use addons to block windows pops-up/announcements:

  • Adblock more
  • Simple Adblock
  • Pop-up Addon Adblock more

• Is it possible to block advertizers to order the ads for me?

  I'm tired of shopping on a Web site and heading to a news site to see ads on the sites of stores as if I'm tracking and ads are customized for me. It happens all the time. I recently saw Zappos.com and Bobbiebrown.com to do this. Is there a way to prevent commercial sites to follow me?

  Have you considered blocking the ads altogether?
  AdblockPlus
  https://addons.Mozilla.org/Firefox/1865/
  In addition, read this:
  http://adblockplus.org/en/Getting_started

• Security updates have blocked incoming messages in Windows Mail - security popup does not accept the password, error number: 0x800CCC92

  Original title: updates blocked mail in Windows Mail - security popup does not accept the password

  Hello - three updates installed security today (KB2691442, 2718523, 2596744).

  Now Windows mail will no longer accept mail entering into my pop3 account.  Security pop - up demand for a/c of the user and the password - I've checked tools > accounts > properties, reset the password, but it does not accept pop-up.  Here is the error message:

  .... POP3, server response: '-ERR [AUTH] username and password not accepted.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Help please! John

  Hello

   
  See the steps in the links.
  Troubleshoot Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Hope the information is useful.

• BlackBerry Q5 can I block incoming phone numbers?

  Is it possible for phone numbers of block to call me on my Q5? If yes how?

  I could talk to your carrier's customer and see what services or applications, it offers. And especially if you are harassed, check with your carrier.

  Otherwise, there are various applications in the BlackBerry World to choose. I did not recommend, but I see other members recommend this or that. My advice is to read the comments in BlackBerry World and Google one or two or three that you are considering.