Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

Hello

1. when exactly you get this error message?

2 are you able to boot into the office after getting this error on blue screen?

3. don't you make changes to the computer until the problem occurred?

I suggest you to follow the steps below and check if it helps.

Method 1: Try to start your system in safe mode and check if the same problem occurs.

http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

Method 3: If the problem persists, then try to run the Startup Repair tool.

Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

Hope this information is useful.

Tags: Windows

Similar Questions

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Error message "Windows cannot access the specific device, a file, or a path. "/ setupstb.exe".

    One offers a solution to my problem of Vista Home Premium that prevents me to access my Microsoft Web Cam (also "glik' won't let me upload files.). Thank you very much in anticipation. Tony

    Hello

    Please only post the same question once in these forums

    an answer another thread

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-message-Windows-cannot-access-the-specific/603544f6-b346-E011-86fd-d485645a8348?page=1&TM=1299283083484#footer

  • error message "Windows cannot access the specified device, file, or the path."

    Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

    Hi nanditaberi,

    Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

    This problem may be caused by this security software on the computer, uninstall them might solve the problem.

    Example: AVG, Zone Alarm

    Important:

    O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

    Ø you may need to check with the manufacturer of security software for reinstallation and activation.

    O re - install the security software on the computer.

    Reference:

    Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

    A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

     

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error message "Windows cannot remove the password. "Password policy or account require the account has a password.

    original title: remove administrator account or remove password

    I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

    Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

    Note also that:
    -You cannot delete the built-in Administrator account.
    -Administrator with a blank password accounts is a big security risk.

  • Get an error message when turning on the computer, then just get a black screen after the message saying cannont find script file c:/windows/run.vbs

    Original title: windows does not

    I have windows 7 and get an error message when turning on the computer, then just get a black screen after the message say cannont find script file c:/windows/run.vbs

    What can I do?

    Enter your bios usually with keys F2 or delete to the first powered

    Use default Optimize can be the F5 key and save and exit,

    Insert your installation disc or flash media and press F8 or F12 to boot on it

    Then use the recovery tools to run the Startup Repair tool.

    http://Windows.Microsoft.com/en-us/Windows/Startup-Repair-FAQ#1TC=Windows-7

  • Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

    Original title: Need help ASAP please

    Hi all

    I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

    Hello Jay,
    Thanks for posting your question in the Microsoft Community forum.
    The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

    This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

    Don't worry; Let's try a few steps that will help you solve the problem.

    Method 1:
    I suggest you run the fix it and check if it helps.

    Solve problems with programs that cannot be installed or uninstalled
    http://support.Microsoft.com/mats/program_install_and_uninstall

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    http://support.Microsoft.com/kb/2669244
    You can check the links for more information:

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • "The parameter is incorrect" Error Message is displayed on the computer

    I'm running Windows 7 Home Pro on an Asus laptop and recently decided to add my old printer USB, HP Oficejet v40, to our network via a print server, LPR Networking USB wireless home. The Installer seems to fill correctly, and my printer appears in the list of available network printers (I alone). However, when I try to print wireless, I get one or more error messages. The first and the most persistent are: a StartDocPrinter call was not issued. Sometimes (not always) this is accompanied by another popup error: the parameter is incorrect. In each case, the document I am trying to print is no longer in effect. My USB utility Server network sometimes prints, and sometimes it is available. Running the printer troubleshooter cannot correct the problem (s) and always results in the following error: printer HP Officejet V40-P05d0443eb can be contacted via the network. If I connect the printer directly to my laptop, USB port, it prints as expected.

    The print driver is up-to-date. I tried to uninstall and reinstall the printer and print server and have also tried to reset the print server and the router, to anything will do. Any help to fix these problems is greatly appreciated!

    Original title: error: A StartDocPrinter call was not issued.

    Hello

    Thanks for posting your query in Microsoft Community.

     

    You can consult the following articles and check if they help:

    Wireless printing Center Resolution of problems
     
    "The parameter is incorrect" Error Message is displayed on the computer
    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&docName=c03283238

    For the error: "the printer cannot be contacted over the network",
    refer to suggestions provided by Meghmala responded on May 28, 2010.

     
    Hope this solves the problem. If the problem persists, you can write back to us and we will be happy to help you further.
  • never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their way of doing recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    See you soon.

    Mick Murphy - Microsoft partner

  • Help with error message: "Windows Vista Home Premium product key you typed in is invalid for activation.

    Original title: help with error message... Please...!

    I use a desktop PC of HP Pavilion a6202.uk with Windows Vista Home Premium & Microsoft Office 2003.  When I am back from vacation & turned on my PC, my password was OK, but rather to raise Windows, I received the following message: "Windows Vista Home Premium product key you typed in is invalid for activation.  He then listed the following options: "access your computer with reduced functionality (this will allow you to buy a product online key)" or "Type a different product key" or "contact HP to help solve this problem."

    I have no idea what a product key is and don't have anything either in the type comes to connect as usual.  I can't access anything to be same to reduced functionality.  I can not type in a new product key because I did not.  I can not contact HP - phone number does not... !!

    I'm quite desperate, I travel docs to print and e-mail to answer and I don't have any idea what is happening.  Please can someone help with this not very IT clued-up DTP...!

    Moved from Vista programs Forum.

    You should have a sticker with the product key on your computer, on the bottom, or under the battery cover.  I try to type this key in and see if it accepts it.  If this isn't the case, you might not have an authentic version of Windows installed.

  • When I insert a CD of the application, I get the error message - 'windows cannot access the specified device, path or file. You may not have access to the item. I tried pretty much everything including a new CDROM and loading on safe mode.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hi Mefrombigd,

    1. it happens with all types of CD?

    2. did you of recent changes on the computer?

    3 when was the last time it was working fine?

    4. you receive the error message when you insert the CD into the CD drive?

    Method 1

    Check if you can access the contents of the CD using Windows Explorer application.

    (a) click the start menu, and then double-click computer.

    (b) make a right click on the CD drive, click Open.

    (c) check if you can access it.

    Method 2

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you perform a clean boot and check.

    To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message: Windows cannot find the C:\windows\system32\drivers\prdmgr.exe file to start Windows XP.

    Original title: can't end file message system 32 drivers prdmgr.exe.

    Under windows XP when I boot, I get a message: windows cannot find the file: c:\windows\system32\drivers\prdmgr.exe and I already made a ststem restore and still get this message.

    Turn off System Restore. Use ccleaner and then go to tools/startup. Select it and click on delete. Are you sure its not the windows folder drivers? If its in the windows folder, is a worm/trojan. Looks like it belongs to the trojan.agent so sound in the drivers folder

    Use ccleaner, and then click run cleaner. First close the browsers

  • System error message -"windows cannot access the specified device path or file. You don't have permission to access it.

    Hello

    Can help you. Had problem with safety messages and now I can't open any programs, get message "windows cannot access the specified device path or file. you don't have permission to access"how to restore the system to clear the message

    No sound as I wrote it. But I've sorted it by running Paretologic Data Recovery

    Thanks for your response

  • When Installing Blackberry software error message Windows cannot access the specified device, path or file

    Try to install the software for my Blackberry on laptop, get the message Windows cannot access the specified device, file, or path may not be the appropriate permissions for access you element. What should I do please help...

    Re-download/save to your desktop > right click on its Setup.exeo run as admin.

    See you soon.

    Mick Murphy - Microsoft partner

  • Get the "pcwum.dll is missing" error message when you open the Task Manager

    Original title: Windows 7 64-bit: task manager and windows update does not work, amd update failed to load detectionprogramm and crashes from time to time

    Sometimes, when I try to open the windows task manager it says: "Het programma kan niet worden gestart omdat pcwum.dll Land op uw computer. ' U * says clean mogelijk oplossen door het programma opnieuw you installeren. Basically, he says pcwum.dll is missing on my computer and I can fix it by reinstalling the program. As it is I can't reinstall the Task Manager. Also, when I try to check for Windows updates, it does not work because it says: "uh" momenteel niet naar "kan updates gezocht worden, omdat Windows Update-service niet actief is. U moet uw computer opnieuw opstarten mogelijk. "translated: you can not search for updates now, because the Windows Update service is not active." You may have to restart your computer. It says this all the time so I will have this since June have not updated since then. When I try to update my AMD updater it says there is a new version available, I now 12.6 and 12.8 update. Can I download and extract, but whenever I try to install it it says it can't find the driver detection program. I have an AMD ATI - Radeon 5700. My computer crashes now and then. I get the famous blue screen, who said he had a problem with a driver (probably one of my graphics card) and needs to restart. When it restarts I have first option starting in safe mode, but I can't update my drivers in safe mode so that didn't help out me. Please help me, I'm having this problem for a few months now, and it gets really annoying.

    Hello HenkVB,

    Thank you for the question!

    It is disheartening to know that have problems you with the the Task Manager, Windows Update and blue screen.

    Question: Pcwum.dll missing everything by opening the Task Manager.

    Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Question: looking for a Windows Update.

    Run the troubleshooter and check if that helps.

    Open the Windows Update troubleshooting tool

    Question: Blue screen

    Perform the steps in the link and check.

    Resolve stop (blue screen) error in Windows 7

    Meet us if you face any problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

    Good day!

    Hope this information helps.

Maybe you are looking for

  • How can I get rid of Thurderbird advertising at the bottom of the screen of my email?

    Two days ago, when I opened my e-mail, instead of my e-mail lists, fill my screen, I now a kind of advertising Thunderbird filling about 1/4 of my screen at the bottom of my emails. How to get rid of him? I have no use for it. Thank you

  • Why my search engine keep returning to google?

    I deleted all except yahoo search engines. But now google will come up as my search engine and appears in the list of search engines. I don't want to not google. So, how can I permanently get rid of google search engine. I deleted google several time

  • An automator workflow is running, and I'm not.

    Years, I wrote an Automator workflow to rename the files that I placed on the desktop. Now, I want to get rid of this workflow, but I can't find it anywhere! It runs whenever something happens to my office, and I want to remove it. When it runs, a di

  • The problems of ios 9.3

    I have an iPhone 6 Plus and have experienced serious problems after the update my iOS to 9.3. These problems include: 1. when I click on a link in an email with the application "Mail" to Apple, iPhone freezes instead of on the web linked as he had be

  • Screen blacked out how I can restore

    my screen has blacked out how to restore it