Blue error screen "Stop 0x0000003E" when you install SP2 to Vista

Similar Questions

• Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

  The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• blue screen STOP 0x0000007B when you try to install Windows XP

  I replaced my SATA hard drive with a new and tried to load my Windows XP disc. Error message Stop came

  The message was:

  "Stop :) X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) it says to check for viruses and remove all new hard drive. It is a new hard drive. What I can do. Thank you

  Hi Pete Hegs.
   
  Try the methods listed in the section below to resolve this issue:
  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
   
  Additional reference on:
  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

• Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Blue error screen Stop 0X0000007E (0XC0000005, 0X8070194F, 0XF78DAC30, 0XF78DA12C) and when ejecting a CD or DVD

  Said event system category 102 event 1003 error view

  Error 1000007e, parameter1, parameter 2 8070194f, parameter3, parameter4 f78da92c f78dac30 c0000005.

  Customer says that has happened for about a year.  Don't know it please help

  Hello

  Use BlueScreenView, MyEventViewer and other methods of troubleshooting BlueScreens
  See the responses in this thread - high two answers.

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/842fa8cf-535e-4b5d-9416-85eb31edbe6f

  ----------------------------------------------------------

  References to Vista also apply to Windows 7.

  This error (7th) is usually a driver problem and display adapter (video) driver is the most suspicious if
  It could be others. Antivirus/antispyware/security programs, major software and hardware (heat)
  questions can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my
  generic methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.
  For a complete list of exception codes, see the Ntstatus.h file located in the inc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem
  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  Make sure you have enough disk space.
  If a driver is identified in the bug check message, disable the driver or check with the
  Reference of the manufacturer for driver updates.
  Try changing video cards.
  Check with your hardware vendor for updates to the BIOS.
  Disable the BIOS memory options such as implementing caching or shading.
  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug switch... This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the/debug switch.

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  List of Microsoft Windows Marketplace tested products.
  Service system or driver faulty device. A service driver or defective peripheral system can be
  responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  and IRQ conflicts can also generate this error.
  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and .chk files files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x0000007E<-- read="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error 0 x 80070643 when you install a Windows program

  original title: windows errors

  How can I get rid of the error 0 x 80070643 when you try to install mse & erorr fatal 'Motif Chorus customer'?

  Hi derekw23,

  1. did you of recent changes on the computer?

  2. you have any software from third-party security installed on the computer?

  3. are you able to install other programs successfully on the computer?

  4. When you get the fatal error on the chorus of reason?

  Check out the link below for thread with a similar problem with the installation of Microsoft security essentials and try the steps mentioned, check if it helps.

  http://answers.Microsoft.com/en-us/protect/Forum/protect_start/installation-error-0x80070643/908fad3e-F9FC-4d8a-BE83-ae7d3bc48db5

  Chorus of reason is a part of a program that collects and stores information about your PC with the intention to provide more effective customer support.

  If you get the fatal error after startup then you uninstall the Chorus of the computer design program and check if it helps.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

• Blue error screen: STOP 0x0000007E (0xC0000006, 0x826163AF, 0x8881AA30, 0x8881A72C), after windows update.

  Vista SP2. Norton 360. The machine is my daughter so the only thing I know that all of a sudden it was pop-up that asked to start windows. She did-online the blue screen. Device is behind a firewall and Norton should also protect viruses?

  I tried the system restore from the last point before the update. But it fails with the error code 0 x 80070017, error in the cyclic redundancy check. What should I do? How to avoid this problem in the future?

  The laptop is acer aspire 5520. No Hw changes made.

  After reboot F8 and not the error code changed 0x0000008E (0 x 00000006, 0x81162C64, 0x8AA8B8AC, 0x00000000).

  [added 24.02.] I have Norton 360 version 2.0 is installed in my laptop. Is the version of Vista SP1 (could be SP2 in any case, it's the lates awailable), Home premium if I remember correctly (how to check it for laptop computer unbootable!) No other Defender running in the laptop. ADSL modem has fireware which is activated.

  No other fancy sw... ITunes, office 2007, Ovi suite.

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Related...?

  The Microsoft Security Response Center (MSRC): Problems of reboot [i.e. STOP error 0x0000007E & BSOD] after installing MS10-015 and the Alureon Rootkit
  http://blogs.technet.com/msrc/archive/2010/02/17/update-restart-issues-after-installing-MS10-015-and-the-Alureon-rootkit.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 10 and 28 when you install Microsoft Access Code

  Original title: code 10, code 28

  I am trying to install a Microsoft keyboard on a USB key.  I'm getting code 10 and 28 drivers about code.  Everything must be up to date.  I have a borrowed keyboard that uses a regular port.

  I asked Microsoft updated drivers and told to download the intellitype pro, I did and which does not recognise either.

  I used different ports, no luck.  I plugged a flashdrive in ports and worked, so apparently it's a software problem.

  How/where can I get the drivers that it must apparently (keyboard microsoft comfort curve keyboard 2000)

  Hello

  ·        As I see that you tried to install the software intellipoint for the keyboard, would now what happens when you start the installation?

  ·        How is what you are starting the installation of the drivers?

  Both the error code you get are related to the driver. You can read the articles given below for more information on the student of the error and the resolution.

  http://support.Microsoft.com/kb/310123

  http://support.Microsoft.com/kb/943104/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Screen goes black when you use the computer - Vista

  Original title: SCREEN GOES BLACK, COMPUTER STILL WORKS. A MESSAGE CAME ON A MIRROR SCREEN, COMPUTER WORKS FINE IN SAFE MODE
  COMPUTER STARTS SOMETIMES, BUT SA SEEMS IF THE NETWORK IS ON THE DISPAY GOES OFF, A MESSAGE CAME ON SCREEN MIRROR, EVERYTHING HAPPENED THIS WEEKEND. DID A FULL VIRUS SCAN, NO PROBLEM, DID SPYBOT AND SOME COOKIES WERE FOUND. vISAT OPERANTING SYSTEM.

  Hello

  If the computer is running in safe mode, then start in safe mode and perform a clean boot to verify if a third party program or service is the cause of the problem.

  Step 1:
  Start your computer in safe modeand try to perform a system restore, safe mode.

  Check out these links for more information about the system restore:
  http://Windows.Microsoft.com/en-us/Windows7/restore-system-files-and-settings  
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 2:
  Try to put the system in a clean boot.

  Refer to this article for help:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:
  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue error screen STOP 0x0000000A and STOP 0x0000004E

  Original title: BSOD error
  I have Windows XP SP3 and receive BSOD with error 0x0000000A and 0x0000004E (once) codes. When I go to safe mode, I get a message that the installation cannot run in safe mode and it restarts with the BSOD. Is there a solution for this? Can I reinstall Windows XP safely? The data is saved.

  0x0000000A and 0x0000004E (once) error codes.

  You tried to paste 0x0000004E in google search? I just do.

  It's the first thing you need to do if you have a question about a particular file or error.

  STOP Msg: 0x0000004E or 0x0000000A in heavy computer use
  http://support.Microsoft.com/kb/139281

  UTC/GMT is 19:18 on Sunday, November 27, 2011

• Get the Blue error screen: "Stop: 0x000000F4 (0 x 00000003, 0x885F7500, 0x885F764C, 0x83676AB0).

  Original title:-Microsoft Vista will not start. Blue screen with detected problem

  My laptop does not start at the top. I have a blue screen and it says Stop: 0x000000F4 (0 x 00000003, 0x885F7500, 0x885F764C, 0x83676AB0.) I tried to solve the problem with my disk of vista kaspersky rescue cd and windows. I did chkdsk and sfc/scannow. It does not start without failure or last configuration mode. I tried many methods in the forums before you reinstall the operating system. Please I need HELP!

  Thanks for the reply, but I had fixed 6.00 PM U.S. central time. I tried repairing the system 3 times using the original disk but still does not start. I tried to use the command prompt and ran the check disk and it worked. I had to type C: to indicate the correct drive and ran chkdsk and it repair the corrupted files. I think it was an update of a driver that caused the problems. It starts after running chkdsk. I learn a lot and thanks for the support.

• When you install SP2, the system displays code error 80073712

  "I tried several times to install the sp2, but the system allways gives me error 80073712i thinks that the problem of resources for" path to record "in the hard drive. Please let the me know how sucesfull to try. My system is Windows VISTAbasic SP1 . My e-mail is: * e-mail address is removed from the privacy *.

  * original title - when tryfor open-heart sp2 the system gives me error 80073712 *.

  How to solve the problems of Windows Vista and Windows Server 2008 service packinstallation

  http://support.Microsoft.com/kb/947366>

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/47d599e5-db9c-41AC-BA38-6224f42b191e>

• XP - error 0 x 80070643 when you install Windows updates

  Original title: Ox80070643

  OPERATING SYSTEM IS XP. INTERNET EXPLORER IS 8. MICROSOFT ESSENTIALS IS MICROSOFT, NOT BETA. TRYING to DO WINDOWS UPDATE: MICROSOFT .NET FRAMEWORK 3.5 SERVICE PACK 1 AND the .NET FRAMEWORK 3.5 FAMILY UPDATE FOR the VERSIONS of .NET 2.0 to 3.5 (KB951847) x 86. UPDATE FAILS WITH ERROR CODE Ox80070643. IT IS ME NOT LET EITHER OTHER CRITICAL UPDATES.

  .. another .a thing in my [MMS] installed office on my computer

  Not knowing the full history of this computer could be problematic for us as we try to diagnose them & solve the problem. That being said...

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. double-click on the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  5. open IE8 (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 1406 when you install office on Vista

  I can't install Office Professional 2007 or Visio 2007.  It starts to install and then I get an error message 1406, implementation cannot write registry key value.  Does anyone know how to fix this?

  Tomoe

  Hi Tomoel,

  Thanks for posting on the Microsoft answers Forums.

  Please follow the link below for an explanation of your question and a few corrections:

  http://support.Microsoft.com/kb/838687/en-us

  Please try Method 2 of the above article first before you try Method 1. Then proceed to method 3.

  Please post back and let us know if it helped to solve your problem or not, so that we can help you if necessary.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you start to print on the hp 6100 the computer stops and a blue error screen

  Starts to print on the hp 6100 the computer when to stop an a blue error screen appears, and the computer must be restarted? Help this is driving me nuts.

  Hi William,.

  Do you receive an error message or error code?

  Blue screen can be caused by hardware and software issues.

  Try the following and see if it helps.

  
  Method 1:

  Try to uninstall and reinstall the printer drivers and check if it helps.

  Uninstall a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Install a printer: http://windows.microsoft.com/en-in/windows7/install-a-printer

  Download HP drivers and software - specify product name

  
  Method 2:

  Refer to the steps in the following Microsoft article and check.

  Resolve stop (blue screen) errors in Windows 7:http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade on the spot, I would recommend you to back your files using windows backup.

  
  Note: I suggest you to provide us with the Mini Dump files to get a better understanding of the issue.

  Follow the steps to copy the contents of the minidump files:

  (a) copy the contents of \Windows\Minidump to another (temporary) location or anywhere on your machine.

  (b) zip copy.

  (c) attach ZIP archive to your message by using the button (attachments) "trombone".

  (d) please upload them to a service like Skydrive file sharing.

  You can view the following link to find out how to send the files minidump using Skydrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Keep us informed on the status of the issue.

• When I try to start my computer, the Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Original title: cannot start my computer

  When I try to start my computer, the dead Blue error screen appears saying Stop: 0x0000007B (0x80399BB0, 0 C 0000034, 0x00000000, 0x00000000)

  Hi WindowsxpUser,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Error message when you start a Windows Vista or Windows 7 computer after changing the mode of the boot drive SATA: "STOP 0x0000007B INACCESSABLE_BOOT_DEVICE".

  http://support.Microsoft.com/kb/922976