Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • Error code: 0x80070005 when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

    can someone help me solve the following problem please? Error code: 0x80070005 is what appears when you try to download the update of Cumulative security for Internet Explorer 8 for Windows XP (KB2809289)

    Is this the same computer as in this other recent thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/mse-protect_start/last-mse-scan-was-two-weeks-ago-is-ok-whereas-my/05eba51d-95f6-4a5d-b313-da0994e57543

  • When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution.

    When you try to retrieve the updates of Windows XP, I get an error of 0 x 80070424. This number does not profile in any recommended solution

    Hello

    This should help you:

    "Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall.

    http://support.Microsoft.com/kb/968002

    See you soon.

  • Receive error message when you try to download the update update for PowerPoint 2003 (KB957784) security

    I still receive an error message when you try to download the update to update security for Microsoft PowerPoint (KB957784).

    I searched night and day for a solution - even contacted microsoft by e-mail.  The specific error is: Code 57F

    It is displayed when I press the "get help with this error message:
    "WindowsUpdate_0000057E" "WindowsUpdate_dt000"

    It was the E-mail feedback:

    Thank you for your email about problems with the download of update of security for Microsoft PowerPoint.

    I understand your concern. Due to the nature of the technical issue, it was not possible for me to respond to your request. There are number of ways you can get technical information to our support team.

    MowGreen-
    Understood the factor of masking - has considered it.  Still, I send my appreciation in this matter.  I would like to know if you think I should download the SP2 for Vista.

    Peace-
    Matt

    Service Pack 2 offered by Windows (automatic) update yet?

    Windows Vista and Windows Server 2008 service Pack is not available for installation from Windows Update and automatic updates does not offer

    Cause
    This problem can occur for different reasons. However, the following reasons are the most common:

    • Already, you have the service pack installed and do not realize it.
    • You must install another update before you install the service pack.
    • You have not installed Service Pack 1 (SP1) and so you are not offered the option to install the Service Pack 2 (SP2). SP2 requires that you have installed SP1.
    • Components of the system that you must have to install the service pack are not installed on your computer.
    • You have a piece of hardware or software on your computer that is listed in the section "hardware and software which if present will result in Windows Update and automatic updates offers is not a service pack " article.
    • You have installed a preliminary version of a service pack, and it was not properly uninstalled before that you tried to install the final version of the service pack

    Service Pack 2 for Windows Vista and Windows Server 2008 is not available to users for which the following update is hidden:

    955430 description of the Windows Vista and Windows Server 2008 installation feature software update released April 28, 2009

    See article KB, Matt. When the system is ready for SP2 [as in you will be informed of the automatic update], suggest then you download the full SP2 package, save, temporarily disable AVG and then install SP2.
    The MS KB article below has sound advice for steps, you have to take before installing a Service Pack

    What you need to know before you install Service Pack 1

    Microsoft offers support without charge to get SP2 installed or for the resolution of problems that arise after he installation

    Start here - free support for Windows Vista service pack problems

    If a problem occurs, you can also solve problems installing yourself-
    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

    MowGreen MVP Data Center Management - update of safety Consumer Services

  • Error 0 x 00000709 when you try to delete the print job and/or pritner.

    Original title: error 0 x 00000709.

    I have a dell laptop running windows vista Home premium SP1 with a 64-bit operating system.  I tried to remove a printer HP 1310 on my computer and it is stuck on "suppression of 1", I stop, then restart the printer spooler and now I have error 0 x 00000709 when you try to delete the print job and/or pritner.   What can I do to remove this printer.   I installed a Canon MX330 printer, but due to the printer HP being locked, I can't print with a PictBridge compatible printer.

    Hi LauraD,

    You can try to remove the printer from the safe mode and check.

    Step 1:

    You can read the following article to start in safe mode:

    Start your computer in safe mode

    Step 2: Remove the printer.

    You can read the following article to remove the printer.

    Add or remove a printer

    After deleting the printer, you can start in normal mode and try to install Canon printer.

    Hope this information is useful.

  • Blue error screen "Stop 0x0000003E" when you install SP2 to Vista

    Error blue screen "Stop 0x0000003E" appears when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2 on a computer with certain multiple processors

    * original title - Vaio VGN-Z870TG appears fornuis Al este error referred al Windows Vista cuando Máquina opera en Windows 7__¿Que debo hacer? *

    Applications, (Norton and McAfee) are known to not uninstall (or upgraded) themselves.

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

    4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

    5. open IE8 32 bit (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

    6. restart a last time & test.

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Get "Error Code 646" when you try to download the update KB957789 for update is not installed

    I tried everything to be able to install the KB957789 update which is an update of security for Microsoft PowerPoint 2007.  I was able to install some other updates correctly, but it will not be installed.  It has been a few days now that I've tried because comes this update on 5/11 I think.  It gives me this message: "error...". Code 646 Windows Update encountered an unknown error. "I have a Dell Inspiron E1505 with Windows Vista Premium and I have 1 installed SP and each update installed on it as well.  Please help me with this problem.  Thank you very much.

    You can also try to re - install Office. That might solve your problems, or that we will know if the ir problem from Windows or if there is a problem with Office
    --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Windows 7: error 5 (access denied) when you try to start the Volume Shadow Copy (VSS) service

    System: Win 7 Ultimate x 64 on a HP Pavilion DV6. My account is the user account only suitable on the laptop and an administrator account.

    When you try to do a system restore, it came with an error that the Volume Shadow Copy Service did not work, even if this error code is not relevant for the purposes of this question later, I managed to run the system restore in SafeMode to an old restore point...

    When you try to turn on VSS, I checked services.msc (which I ran as administrator) and VSS was off and on the manual. I tried clicking on start, the following error message came:

    "Windows didn't start the Volume shadow copy on the Local computer service."
    Error 5: access is denied. »

    I then switched to automatic and tried again, same error. I tried since everything I can possibly think (including the definition of back and forth between manual & auto then trying the solutions below) to get the service starts, nothing helps. The solutions tried so far:

    -net start vss high cmd - returns the same error (error 5 access is denied)
    -high vssvc.exe cmd - same
    -changed the full control permissions for me, the group admin and NETWORK SERVICE (that I had to add) to the System32 folder and vssvc.exe but no change
    -changed the permissions to full control for myself, admin and NETWORK SERVICE group (who even once, I must add) for VSS in regedit (open as administrator) still nothing
    -even tried to restart explorer.exe a high cmd and a task manager high and again made the permissions - still nothing.

    The only thing I haven't done is run a sfc scan, but tbh, I doubt that will fix anything. It also seems that VSS has been turned off for a while, as my last restore point was about 3 months ago and I installed things since.

    Any suggestions/ideas would be appreciated, because I'm going nuts with that now! Thank you!

    The Volume Shadow Copy Service must not be on auto-start.

    According to the site TechNet Microsoft VSS THAT was introduced with Windows XP SP1 and since that time it has always installed as manual start since he does not need to be started automatically and it works day and night to do nothing.  Some places say different times when VSS has been introduced, but be sure that it was a long time ago.

    A popular site to see how Windows Services should / could be put in place is here:

    http://www.blackviper.com/service-configurations/

    If you've read about VSS on Microsoft TechNet, it says:

    https://TechNet.Microsoft.com/en-us/library/hh125927 (v = ws.10) .aspx

    So do you think the MS TechNet site is fake and that each installation of Windows since XP has a badly installed VSS Service?  If that were the case all Windows systems in the world would be in trouble.

    On an unafflicted system if you open the services applet and observe the VSS Service, it should look like this:

    So if you start a backup operation or even create a Restore Point, go back to the Service applet and press F5 to refresh you'll see that the VSS Service changed its status to start:

    Once the operation is complete the VSS Service will stop itself (it may take a while).

    That's how it is supposed to work.

    We should certainly be able to affect the automatic VSS Service and you should be able to start, but you shouldn't need to.  People who say that "solved their problem" forgets to mention the days/weeks to try things that lead to get their system of work.  There is no way of knowing which of the dozens of things that they could have tried really solved the problem.

    You say that the system restore worked in Mode safe (but not a normal startup) and if it is true that means usually something to load in a normal trunk causing a problem and that something is usually an antivirus/antimalware application that is 'protect' your system against the changes.  When you start mode safe these things are usually not loaded this is why sometimes your system restore mode without failure.

    Contributors known for these programs are Norton, McAfee, Avast, Avira, Kaspersky and probably others.

    So what antivirus/antimalware programs you are running and have checked their support pages for known problems with backup/restore system restore?

    Norton has even a page about these issues:

    https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us

    Even McAfee told their product to uninstall completely before doing a system restore:

    "Intel Security recommends that you remove McAfee security products before to proceed with an upgrade of the operating system or the Microsoft System Restore and then re-install your McAfee product when the update/restore is complete. "

    So I assumed that whatever your AV program happens to be could be part of the issue here - but we don't know what it is.

    We know error 5 is a permissions/access denied error type, but you shouldn't make adjustments to get VSS to start if something is wrong.  If as you have tried adjustments have been necessary every Windows system in the world should also make these adjustments and coming is not past.

    Of course, now, your system might be more affected since you've been changing permissions on the things trying to VSS to start when there is probably not a problem with VSS in the first place, so who knows what condition are in now.

    You could start by uninstalling what your AV software (most manufacturers have a special program for that) and by eliminating third-party applications that are known to interfere.  You can always reinstall them again later, no?

  • Have verizon usb 720 modem for my laptop. 1603 error codes and Error code 2738 appear when you try to install the update for the device.

    Have verizon usb 720 modem for my computer laptop vista Home Premium 32. Here downloaded update but when get novatel driver the device install failed code 1603. Then he checks the previous versions and the installation States. After 1 min error 2738 VBSricpt moment of action custom execution failed. A verizon tech says that it is a windows problem. Another says that it is a usb device bad 720. Verizon says the rssi-rtt and the rssi on there network evdo should be about - 80 and my poster-98 device manager and-88 most of the time. With 3 bars of signal, they say it's the 720.mkv that's a bad camera or laptop? Can not stream video and Media Player even freezes. Have updates and it started 2 months ago. Any help don't want not to block 2 years for a new modem, if no change. Or would it be the laptop? Thanks for any info.

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

    "Connect to a network, mail and the Internet."

    Or here:

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    They will help you with your question in Vista Hardware and drivers Forum above.

    They will help you with your question in the Forums above for Vista.

    See you soon.

    Mick Murphy - Microsoft partner

  • 4013 error keeps popping up when you try to restore the old iPad

    I was going to give old iPad (3rd generation, 64 GB Wi - Fi cell =) of my friends to my niece and follow all instructions on this link https://support.apple.com/en-us/HT201351.  But it turns out, she could not even get sound or use. He continued in this vicious circle of turn the page of "Hello", asking for language, country, network, etc.  Then screen would say impossible to activate.  So I forced to restart, log apple appeared, then the black screen that showed 'connect cable to iTunes' appeared.  So I plugged into my Mac.  My Macbook is new <6 months="" old="" with="" el="" capitan="" os="" x,="" itunes="" is="" also="" updated.="" then="" followed="" these="" instructions="" on=""> https://support.apple.com/en-us/HT201412 (I did point #3). I chose "update" first, then when it does not solve my problem, repeat the steps and chose "restore" instead.  In the end, still no resolution, window that says error 4013 occurred. This old iPad, of course, was the Apple Care warranty.  I'm surprised to find that many people have this same problem and no announcement of a recall on these things.  I have the original iPad (first generation), and thank God it is still in working condition, used by another niece of 2 years.  And the irony is this 3rd generation, there are problems.  Y at - it hope that it can be corrected.  I paid top dollar for this piece of technology, I bought every model of iPad and iPhone, same macbook air/pro, macbook, there is.  And is the one who gave me the biggest problem, it seems a waste of money. Should I take in for repair (and pay service fees)? If anyone can share what they found to the same question, I would be grateful.  Thank you

    The first thing to do is to ensure that you have the latest version of iTunes on your computer. iTunes 12.3 is the latest version.

    This link to Apple support page provides more information about the error 4013:

    If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

  • Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

    I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

    When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

    See you soon!

    Ken, "Medic95."

    See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Arrows appear when you try to draw the line in Photoshop

    Sorry for the noob question, but when I try to draw a line in Photoshop, I get only an arrow.  Can someone tell me how to solve this problem?  Thank you!

    If you use the online tool, make sure that you do not have the arrow heads selected by clicking the gear icon.

  • Get the error code 646 when you try to download the update of April 10

    I am trying to install an update in April 10,2012 and the code646 of error appears and it let me download the update? What should I do?

    Hello

    1. what day you're talking about?

    2. don't you make changes to the computer before the show?

    Please follow the steps from the link below.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    How to back up and restore the registry in Windows

    You receive the error code: 0 x 80070646, error code: 646 or error code: 1606 when using Windows Update or Microsoft Update

    http://support.Microsoft.com/kb/2258121

  • How can I block the alert that appears when you try to access the GPS coordinates?

    I develop an application that has access to the GPS coordinates and when I try to access appear a message that says "a JavaScript asked the physical location of your device. You want to offer this to the script? Can I block this alert?

    If you use the HTML5 geolocation API (lots of examples on a google search) instead of blackberry.location.latitude etc., you will be asked only the first time.

  • error 0 x 81000019 when you try to run the Windows backup utility

    original title: 0 x 81000019... Attention Microsoft

    Error code 0 x 8100019 and a sub-code when you use the utility backup of Windows 7... Finally resorted to re - format and re-installation of Win 7, then ran backup before installing the Microsoft updates, which was a success.

    Downloaded and installed the Microsoft updates and then run backup... back to the original problem. Logically, Microsoft, it appears that one or more of your updates has interfered with the Windows 7 backup utility... my time is limited and I paid for the product rather than be given to the problems with the product to sift... may your Tech run this through clean install and add each update to identify what, if any. are the cause of the problem?

    Hello leighbordignon,

    I suggest you follow the link below and look at the steps suggested by Sneha, I see that this has contributed to many users with the same question:

    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/fce6950d-C06D-4dd0-A850-67022db4fe04

    Thank you
    Irfan H, Engineer Support Microsoft Answers.

Maybe you are looking for