Blue indicator of Win 7 circle network ALSO hang Device Manager and MSE does not

I have a strange problem since the recent windows updates.

Indicator of network in the bar tasks displays a blue circle for about 20 minutes after I start the computer. During this time I can't run regedit, I can't open the Device Manager, and I can't seem to activate the protection in real time to Microsoft Security databases. However all the time I have internet and network access.
After about 20 minutes the light will come back normal (sometimes it goes through a Red Cross first), date at which the computer then runs everything normally, if I have my phone on, I get the auto run screen, Device Manager works and I can also start MSE.
It's as if the computer is waiting for something to happen. Device problem? However, all devices appear to work normally.
The latest updates, I made were optional for monitor HP and Microsoft mouse and a keyboard, both of which work well in the era of 'blue circle '.
I also tried updating the adapter software.
It is not important, but it's annoying!
Advertisement

Hi Carmen,.

The blue circle on the network icon indicates that the system is looking for a network connection.

If it appears at the start, then start the modem and the router before you start the computer.

Method 1:

Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

Method 2:

Step 1:

Check if the problem persists in safe mode with network.

Check out the link:

Startup options (including safe mode)

http://Windows.Microsoft.com/is-is/Windows7/advanced-startup-options-including-safe-mode

Step 2:

If the issue is not still in safe mode, and then start the clean boot computer to determine if a third-party program is causing the problem. To configure your computer to clean boot see the following link.

How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
http://support.Microsoft.com/kb/929135

Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.

Also check the link for more information:

Slow PC? Optimize your computer for peak performance

http://www.Microsoft.com/en-in/athome/Setup/optimize.aspx#fBid=_dBb8lcqecd

Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

Tags: Windows

Similar Questions

  • Toshiba DVD Network Dock II - LAN driver installed but does not

    Toshiba DVD Network Dock II PA3007E-1DST

    I found this file on the internet: "t8103cl9" and I don't remember how I did but I managed to make it work!
    I needed to reinstall Windows 98 SE on my laptop because I had to, but I have other installation for example driver Sound, driver graphics driver and modem but I installed "t8103cl9" and in Device Manager it happens 'Toshiba PCI LAN FastEther II paper. "

    However, I can't access the network on Internet Explorer 6.0 or Mozilla Firefox!

    Any suggestions appreciated
    Nick

    I m wondering why you started new thread on the Toshiba DVD Dock II network because I found another thread 2nd in this forum that you opened some time ago
    However, as the LAN card is already recognized in Device Manager, the issue should not be the missing LAN card driver, but from my point of few LAN connection has not been configured correctly.

    To be honest it of a long time since I worked with this ancient system in Win 98SE and I do not exactly remember the steps how to configure the local and internet network to help Win 98SE, but knowledge base Microsoft contain a lot of useful KB article on different themes.

    I found this one:
    http://support.Microsoft.com/kb/192534/

    I hope this helps you solve the problems of network connection.

    Of course, I recommend to search in internet for more FAQ and HowTo in which case the article would not be useful.

  • No network card in Device Manager

    Windows has started giving me BSOD about 2-3 weeks after the installation of new hardware (CPU, MoBo, RAM, sound card) with old hardware (GPU, power supply, HARD drive, more RAM). Why he gave me BSOD this long after the upgrade, I don't know, but I have an inkling that it may be due to a processor AMD will an Intel processor without reinstalling the operating system. I was also able to activate Windows (he has started to think it wasn't authentic) since slui.exe did not work. I changed the power supply because of the requirements of power increased and finally reinstalled the operating system and now have a new copy of Windows active and ready to go. No BSOD (so far) no driver issues, nothing went horribly wrong.

    In this context, I present you my current problem: just before I reinstalled the operating system, when a backup of my data, I noticed that I couldn't connect to the internet. It showed I was connected to the LAN but no internet. I got hurt like that before, but it was either something I could fix it by resetting the adapter or the DSL down. I thought it was just another thing that turned bad in Windows and that a reformat/reinstall would fix it, as it does most of the problems.

    The thing is, after reinstalling Windows, I noticed while I was installing drivers from the CD to the MoBo that the LAN driver was not clickable. I checked Device Manager and, of course, there was no topic network cards. Search the hardware changes do not work, and flashing the BIOS (via M-Flash) did not work.

    Since the MoBo is around the age of two months, I believe it is not a hardware problem, but is there another possible explanation? I'm going to RMA this mid-September if there is no solution at this moment here.

    My motherboard is a MSI 785GT-E63. I will give all necessary data to solve this problem. Thanks for all the advice I can get.

    There is no unknown devices in Device Manager, I installed all the drivers for all my hardware. I even downloaded the latest drivers from MSI site, including the network adapter driver, which I installed it without result on another computer.

    There is a setting to disable or enable the LAN, but it is set to 'Active '. I'm also leaning towards the network chip being broken due to overheating of the thought. It is a turn intermediate with a huge GPU and poorly ordered PCI/PCI-e slots. The single NIC that will fit must be PCI-e x 1 which are more expensive (about $30). I'm leaning toward move my computer to a larger Tower (the one currently resides in my brother's computer) or, as I've mentioned before, RMA'ing it.

    Thank you for your response. I'll see if there are any other ideas or suggestions before the agreed time.

  • Download "Bluetooth device driver not installed." with my mobile phone in Lenovo laptop. I could also see a yellow mark on this device in the Device Manager and a code 28 error

    I have a very serious problem about Bluetooth. And it's really frustrating. I don't know exactly what the problem with it, but my problem is as follows

    When I connect my mobile phone via Bluetooth for laptop (win 7 ultimate), my system shows the connection. Also, I see my mobile phone listed in the device window. Earlier, when I brought the computer laptop, everything seemed good, at this time, when I use it to open the device (IE to control ); a window would show the option for playing music (there was a lot of option as a 1 ' headset and speaker") and other services supported by the device. but now, suddenly somehow window appears but with in a 2 sec to disappear again. Whenever I try to open the device I get this error. I must say that it is very very frustrating as you try to move your cursor to click on audio playback on this portable display option, the window disappears. Help, please. Now, let me tell you what I tried to solve this problem.

    I have laptop Lenovo, which has something like that for bluetooth

    Broadcom Bluetooth 4.0 USB

    Microsoft Bluetooth enumerator. I have 32 bits of the system, processor i3, win 7 ultimate, one port wifi

    In the center of troubleshooting, I tried for the material of scanning that show this Bluetooth device driver not installed (I could see a yellow mark on this device in the Device Manager and a code 28 error).

    But windows cannot fix it.  I have tried multiple devices but nothing turned up. also I tried the same devices on different laptops and all of them worked very well.  I checked online trouble - shooting.but not very useful. Please don't tell me about recovery. I don't know when it happened.

    Please help me. Please give me link if there is no download needed

    Original title: bluetooth

    Hi Roger,

    You encounter the error code 28 in the device to any device manager if the driver for this device is not completely installed on your computer. I suggest you to update the bluetooth adapter driver and check if it helps.

    Refer following article which contains steps of troubleshooting for bluetooth related questions and see if the problem is resolved:

    Error: "device driver Bluetooth not found" when you try to connect to a bluetooth device

    Note: Ignore the title of the article and also to find additional troubleshooting steps under the "more information" section.

    Please come back if you face problems related to Windows and we will be happy to help you.

  • the wireless network icon is suddenly changed and I do not now see my signal strength

    the wireless network icon is suddenly changed and I do not now see my signal strength... What do I do to fix this... ?

    Hello

    Have you made changes on the computer before this problem?

    I suggest you try these methods and check the status of the issue.

    Method 1:

    Wi - Fi and in Windows network connection issues.

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    You can also try temporarily disabling computer security software and check.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  • "lcwipx.exe of shortcut that you refer to is not available" and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

    When connect my external hard drive and opening not wanting my my files, I get this message "shortened lcwipx.exe you make reference to is not available"and her does not open. He also asked delete me the shortcut. What is the problem and how to solve this?

    Hi Pascal,.

    I see that you get an error trying to access files on an external drive. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. What is the brand and model of the external drive?

    3. what security software is installed on the computer?

    4. have you made changes on the computer recently?

    5A external drive earlier good work?

    6. have you updated to Service Pack 2 installed?

    Method 1.

    Connect a different drive to the computer and check.

    Method 2.

    Plug this external drive on another computer and check the status.

    Method 3.

    Start the computer in safe mode and check.

    Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

    Method 4.

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Win7 does not detect not ethernet cable, no network card in Device Manager

    OK ive tried to solve this problem for 2 days now, I need help from others. Here's the problem: I plugged my ethernet to the slot cable and I can see the lights, but the computer does not detect I went to Device Manager and check if my adapter excist but I found no network card, I searched the internet and could not find any solution. I had a P5QL motherboard 4 GB of ram real processor 2.80 ghz of intel. Can someone help me?

    Try:
    -Download a new copy of the drivers for the network card
    -uninstall the software of network adapter in Control Panel... Programs of... Uninstall a program
    -Uninstalling the card and software driver (right click... Device Manager Uninstall)
    -remove card installation and restart without the card.
    - then put the card in and reinstall the drivers.

    In case it is damaged, try another network card.

  • Win 7 Backup and Restore does not recognize the USB flash drives.

    Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

    Back up and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    You can't save backups to a flash drive, you need an external USB hard drive.

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

    I am not able to adjust the height of a page on my site. I try to move the blue mark on the left side and it does not move. What should I do? Thank you

    Hello

    could you please try to find an empty project as rectangle/text box, especially at the lower end of the page. Use Edit-> "Select All" to select all elements on the page, it will be easier to locate.

    Let me know if it works

  • I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This happened on fo

    I can't refine edge to work in 2014 of CC.  I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work.  I used refine edge before and it has always worked.  This has happened for a while.  Very frustrating!

    Adobe Creative Cloud to edge CC>

  • new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

    Two hp 17-inch workstations mobile (business) Z book 17

    On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

    On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

    I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

    These are the pop ups that appear for each when displaying of readers by opening my computer:

    When left click hard disk drive a pop up appears with the title bar: location is not available.

    H:\ is not accessible.

    Access is denied.

    Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

    The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

    By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

    I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

    I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

    Then I went to the flash drive.

    Left click on the flash drive produces a pop-up with title bar G:\

    You don't have permission to access this folder.

    Click on continue to get permanent access to this folder.

    After clicking on continue it opens another pop-up with title bar G:\

    You have been denied permission to access this folder.

    To access this folder, you will need to use the Security tab.

    When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

    The tabs are general, tools, hardware, sharing, ReadyBoost, customize

    He did not indicate what to do next.

    Summary:

    Two new computers hp zbook stations mobile work with win 7 pro

    Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

    The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

    How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

    I have so far done the following:

    (1) run administrative guest with sfc/scannow and it found no violations of integrity

    (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

    (3) contacted HP support

    (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

    (5) updated drivers using HP support assistant on each computer

    (6) windows update the device HP support assistant on each computer

    How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

    How can I access my files on the external hard disk and flash the mobile workstation book z?

    The specifications for the mobile workstation of zbook are:

    Operating system: Windows 7 Professional 64-bit Service Pack 1

    Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

    Moemory system: 16 GB of memory on 2 1600 MHz dimm

    Graphics device 1: Nvidia Quadro K3100M

    Graphics device 2: Intel HD 4600 graphics card

    Hard drive 1: SCSI Disk Device

    C: 683.42 (613,62 free go-go)

    D: 12.21 GB (1,3 GB free)

    E: 1.99 GB (1.97 GB free)

    The hard drive is a seagate 1 TB drive that works very well

    The flash drive is a 1 GB drive which works very well

    Here is the new mobile workstations HP Z book 17.

    Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

    HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

    These two mobile workstations have problems of USB port with all the ports on each computer?

    These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

    What does do to be able to back up files on a disk external hard drive internal?

    Have to do to be able to use flash dirves with a 17 mobile workstation z book?

    This problem has been resolved.

    The book of Z 17 HP installed their software: HP Client Security.

    This software prevents the use of external hard drives and flash drives in its default settings.

    Each customer is on their own in discoverinv and the resolution of this problem.

    There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

    The way in which this issue has been resolved was by a clean boot process in msconfig.

    When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

    Whenever the hard drive or flash drive has been verified.

    We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

    This consumes a lot of time and was so frustrating.

    On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

    HP did wrong by not providing any information on the inside of this product the HP support assistant.

    Here's a consumer might encounter problems:

    The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

    After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

    It is the customer of HP security information:

    http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

    There was no information to reconfigure the software in the white paper.

    I was able to find a user guide.

    This guide was not and was not available through the HP support assistant:

    http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

    Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

    The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

    So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

  • HP 15 D103tx: can't detect the wireless network adapter in Device Manager.

    I can't detect wireless network adapter in the device even Manager after installing the drivers wireless from the following link: http://support.hp.com/in-en/drivers/selfservice/HP-15-d100-Notebook-PC-series/6782098/model/6837966?...

    Wireless "F12" key remains orange color after pressing it several times. I tried to install "Drivers HP wireless button" from the link above, but between th installation process I have error ot OS isn't accomanied for pilots

    I can't connect to a wireless network from my wireless adapter doesn't work. I have to sit near my wifi router to connect with laptop computer using lan cable.

    Even HP Support Assistant does not detect the wireless network card hardware

    Help, please!

    Hello

    According to HP Partsurfer, your lapotp came with Atheros AR9565 802.11bgn 1 x 1 WiFi and Bluetooth 4.0 adapter combination WLAN. Also, your laptop came with FreeDos and I guess currently installed Windows 8 64 bit OS, I am correct?

    The Support page for your machine, doesn't show that the Realtek RTL8188EE 802.11b/g/n Wireless LAN Driver for Windows 8.

    Please download, save & install the Dirver and restart the system, check if the wireless works.

    Concerning

    Visruth

  • Two mentions listed under the network adapter in Device Manager

    Good evening

    For the record, I use a Compaq Presario AMD Athlon (TM) 64 Processor 3300 +, 2411 MHz/1.93 GB RAM, running Windows XP Home Edition, SP3, with IE8.

    I was looking around ' Device Manager ' tonight and I noticed two references under "network card".

    (1) 1394 network adapter

    (2) siS 900-Based PCI Fast Ethernet adapt

    Could someone please tell me what is the purpose of each of them and do I need two permits.

    I have only this one computer and I connect to the Internet with a connection cable from Comcast.

    Thank you and best regards,

    2harts4ever

    "... enough Said." Keep smiling because I'm smiling too! »

    Hello:

    There is no reason why you should disable one of them. Certainly not your adapter PCI ethernet, or your internet connection is also disabled.

    Here's what's your other link:

    http://ask-Leo.com/whats_this_1394_network_adapter_on_my_machine.html

    Paul

  • Blue screen at startup - no code error and it does not open in safe mode

    Hello. I have a Sony VAIO (VGN-N130G) which is about 5 years old. I also have a blue screen error at startup. Unfortunately, there is not a code of error/message at all. I tried to start it in Mode safe mode, but it does not work... just blue screen. Is my bread cell phone?

    Hello
     

    Method 1.
    If you have a Widows XP installation CD, refer to the article below and check if this helps us start successfully.
    How do I recover from a corrupted registry that prevents Windows XP startup
    http://support.Microsoft.com/kb/307545

    Method 2.
    If the steps above do not help to solve the question I would ask you to perform a repair of Windows XP installation. See the link below for the procedure.
    Perform a repair Installation
    http://www.Microsoft.com/windowsxp/using/helpandsupport/learnmore/tips/doug92.mspx
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Intel wifi adapter xps m2010 disabled in Device Manager and in the network and sharing Center

    Original title: intel wifi adapter xps m2010

    for some reason any my intel pro wireless network adapter not turn on using the shortcut keys or by selecting with the mouse. Says its disabled in device in network and sharing Center Manager yet it does give me the option to activate it. Im confused

    Hi pillowgod,

    1. When did you start to question?

    2. you remember to make changes to the computer before this problem?

    You can check the following link and try to run the manual Intel WiFi diagnostic tool to check the functionality of your WiFi adapter.

    http://www.Intel.com/support/wireless/WLAN/sb/CS-025780.htm

    You can also try uninstalling and reinstalling the Intel wireless card and check.

    a. Click Start and type in Device Manager in the start search and press ENTER.

    b. expand the network adapters in the Device Manager

    c. right-click on the device, and then click Properties

    d. click on the driver tab and click on uninstall the drivers and click OK.

    e. restart the computer and check.

    You can also see the Intel Web site and try to download the latest version of the card wifi drivers.

    http://Downloadcenter.Intel.com/default.aspx

    You can also check out the link:

    http://www.Intel.com/support/wireless/WLAN/sb/CS-025807.htm

    Hope this information is helpful

Maybe you are looking for