Blue screen after installation of the updates of Windows in Windows 8.

Original title: does not

I clicked on the option Update and shut down and out... when I got home and he lit his does not... its simply display a blue color... what should I do?

We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.
You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.
If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)
To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".
The procedure:
* Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
* Zip up the copy (compress)
* Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.
Link to find out how to download below.
To ensure the minidumps are enabled:
* Click Start, in the search box, type: sysdm.cpl, press ENTER.
* On the Advanced tab, click Startup and recovery... Settings button.
* Make sure that automatically restart is unchecked.
* Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
* Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and download the output as well.
To run MSinfo32 please go to start > run > MSinfo32
Go to 'file', 'save' and download the PDF is saved with the DMP
System specs are extremely useful then please include everything you know.

Blue screen view and that crashed are often wrong and should only be used in case of emergency...

Troubleshooting of WIndows/source here
You can learn more about BSOD here
You will learn how to test your memory here 
An effective question gets help more quick read how here


Team Zigzag3143.com  

Tags: Windows

Similar Questions

  • A BLUE SCREEN after you install the update for windows vista for x 64 (kb970653) (KB972036) (kb973879) systems

    Unfortunately, I had not created a restore point and had to restore my computer settings to solve the problem.   I got the blue screen in ordinary Windows with in minutes after loading and after 30 minutes or more during my safe MODE session.

    I have my computer on now with all updates but these three...  (kb970653) (KB972036) (kb973879)

    What should I do now? Where can I report this to Windows? or when I know that it is safe to download new updates?

    Person is not one of the three that actually caused the problem?  (im not really want to try an any of them again... lol)

    (btw, my computer is a HP Pavilion dv6-1245dx, Vista x 64)

    This thread also contains the fix:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c619f139-00e3-4492-8972-1ea8dc3b13a9

    If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!

  • Get windows error blue screen after installation Service

    I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

    I tried to install GO twice and got the same error.

    Awating for your valuable review

    Hi piZviZ,

    Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

    (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

    (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

    (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

    I recommend just update to the latest going TO if possible.

    Kind regards

    Joseph

  • Blue screen after reboot during the installation of the security updates.

    Am also having problems with the blue screen when you restart to install the updates of security (1 blue screen while the computer turns off), which began before 11 security updates 13 Oct.

    These updates of security of the Oct. 13 show as pending. Then uninstalled reintsalled via windows update and still see the as pending. Also received blue screen during the uninstallation of security updates.

    Using ESET Smart Security 4.2.58.3. Removed McAfee supplied with the computer.

    Computer seems to work very well with pending status updates - no more blue screens during use. The latest version of windows update.

    Please notify

    Problem solved blue screen - had to uninstall and reinstall the suite ESET Smart Security.

  • Blue screen after installation KB2393802 / KB890830

    Windows 7 Ultimate

    I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

    My impression is also that other side to this problem if you for example search KB2393802 on google.

    Is it a known Microsoft issue and if there is a fix available for this?

    Any hint is appreciated.

    Cheers, mikeych

    Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

  • 52 for USB Composite device driver code (can't check signature of driver) after installation of the updates of August 2014 on Windows 7 x 64

    After you install the updates of August 2014, my keyboard/USB wireless mouse has stopped working, and the receiver is marked as "Device USB Composite" with code 52 - cannot verify the signature of the driver.

    Really, the usbccgp.sys to Windows 7 file is not signed (unlike Windows 8.1), but I've never had a problem with this until recent updates.

    Unfortunately, these values are not in the key "reg" you have asked. (Note: I no longer feel the question).

    I managed to solve the issue of the restoration of a restore point, and at that time system that has pulled the update KB2982791 - I wonder if the problem has been caused by that.

    With all the other August 2014 updates installed, the issue did not reappear.

  • Cannot stop the installation of the updates of Windows that stopped at halfway.

    Original title: arrested installation

    during the installation of the updates stopped at halfway and I can't stop installation

    milkway

    Hello Milkway,

    Thank you for your message.  If please see the sticky thread below and let us know if he did or did not help to solve your problem.

    http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/a507eaa9-3ff8-4162-9546-693760b1f602

    See you soon

    Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Why Forefront Endpoint seems to prevent the installation of the updates of Windows on my PC?

    Since I installed Forefront Endpoint Protection on my XP PC, I can not get the automatic updates of WIndows update my PC unless I 1st update endpoint forefront of pioneering program and THEN pick up and install windows updates. There is often an index update for first place in the list of updates, too. If it is not, I can guarantee you pretty well updated Automatic will not end.

    Why is this? I am very annoyed because I thought that these two programs work well together, but it seems to prevent other work! I have to make exceptions for the updates of windows in the foreground!

    Hello

    Your question about Microsoft Forefront Endpoint is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

    Link to the forum:

    http://social.technet.Microsoft.com/forums/en-us/FCSNext/threads

  • Satellite A300-1MX - blue screen after installation

    Hello
    I have a problem with the Installation of Windows XP. I set Compatibility Mode and everything.
    But at the end of the Installation comes the blue screen and windows stopped.
    "An important topic for the operating system stopped unexpectedly.

    I loaded the Toshiba SATA drivers, but they don t work.

    I put t know what to do, please help me.

    And please forgive me my bad English

    Grettings Infi38

    Hello!

    You need to install SATA drivers before you install Windows and if you have compatible SATA mode you t need SATA drivers but you have lost performance a bit.

    So I want to reinstall Windows in AHCI mode, you need to download the Toshiba Storage Manager (http://eu.computers.toshiba-europe.com).
    Copy the driver on an external floppy drive and press F6 after starting the laptop to CD or create your own installation with nLite (http://www.nliteos.com/) disc.

    Good bye

  • Blue screen after installation of AOL

    After installing AOL, I get a Windows blue screen error

    6.0.6002.2.2.2.0.768.3

    1033

    BCCode 19

    BCP1 0000000000000020

    FFFFFA8005AC2A30 BCP2

    FFFFFA8005AC2A60 BCP3

    BCP4 000000000403000F

    6_0_6002 OS version

    2_0 SP

    Product 768_1

    Files helping to describe the problem

    C:\Windows\Minidump\Mini020411-03.dmp

    C:\Users\Betty\AppData\Local\Temp\Wer-46457-0.SysData.XML

    C:\Users\Betty\AppData\Local\Temp\Wer1380.tmp.version.txt

    Any ideas on a fix, uninstall us AOL all right. We are dile-up here

    Hello
     
    1. you install the version appropriate for your operating system?
     
    Check if this software is compatible with Windows Vista in the Windows Compatibility Web site .
     
    I would have you install AOL after you put your computer in a clean boot State. It is possible that a third-party software could be the culprit. Clean boot helps eliminate conflicts of third party software.
     
    Note: Follow step 7 to your computer as usual.
     
    If that does not solve the problem, the problem may be with the AOL software. I wish that you contact AOL support for better help.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Glitch screen after installation of the graphics driver on HP G60-120US laptop.

    I recently did a clean install of Windows 7 Ultimate on this laptop, and I have downloaded all the drivers provided on the site.

    After installing the video driver a more specific sp45230.exe, I couldn't help but notice that the screen is subsequently very temperamental and he flashes so often, causing green to appear lines and occasionally causes of segments of the screen to move to the left for a fraction of a second.

    While it is certainly a notch above have generic drivers for a new installation of Windows, can someone point to me where I can find another solution for this screen, or maybe a new driver? Any help would be appreciated. c:

    Confirmed: After 2 months, no one is able to solve this problem. Congratulations, HP. You have lost a customer.

    Lock request.

  • blue screen after pulling on the power cord

    I accidentally pulled the power cord while the computer was on, now I get a blue screen that says to run checkdisk, but I can't go beyong trhat screen.

    my suggestion is to start your computer with a xp cd and run a chkdsk command & via the recovery console fixboot.

    There is more info here but focus on option 2: http://support.microsoft.com/kb/314058

    Sometimes the fixmbr command must also be executed as well, if the computer gives you an error message later on "master boot record".

    DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >

  • After you install the updates, my window screen has lost about 2 1/2-in. horizontal spread. How to return to the full screen size?

    I just installed a series of updates from Microsoft.  When the updates were completed, the screen has been compressed by 2-1/2 inches horizontally.  I don't know how to go back to its original size.

    On Saturday, December 8, 2012 12:48:59 + 0000, MardineCampbell wrote:

    I just installed a series of updates from Microsoft.  When the updates were completed, the screen has been compressed by 2-1/2 inches horizontally.  I don't know how to go back to its original size.

    Right-click on the desktop and choose screen resolution. Assuming that
    you have a LCD monitor, set the resolution on what the manufacturer
    recommend.

    Ken Blake

  • Error 0 x 80040154 whe updated after installation installed the update KB915597

    Original title: since kb915597 was installed are not able to update defender and windows

    Since the updates 18/04/2012 for defender and windows update KB915597 I was not able to make updates to get the error code 0 x 80040154 even when I try down loading Microsoft fixit

    Hi Charlie,

    I suggest you try the following and see if it helps.

    Step 1: Clean boot

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 to article

    In addition, perform the steps in the following Microsoft KB articles.

    http://support.Microsoft.com/kb/2509997

    http://support.Microsoft.com/mats/windows_update/

    Step 2:

    Temporarily disable the security software.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note:  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

     

    Step 3:

    Uninstall update KB915597.

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    Once the update is removed, restart the computer.

    Step 4:

    Try to download the default manually updates on the Microsoft Download site and install the same.

    http://www.Microsoft.com/en-us/download/default.aspx

    If the problem persists, then follow step 4.

    Step 5:

    Reset Windows Update components.

    Run the fixit in aggressive mode, restart the computer and then look for the updates.

    http://go.Microsoft.com/?linkid=9665683

    Hope this information is useful.

  • After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hello

    Welcome to the community of Windows Vista answers.

    First of all, we will try if we can start in safe mode.

    Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

    Steps to start your computer in safe mode with networking
    1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

    2. Select "Safe Mode with network" and then press ENTER.

    Access the link below for more information on how to start in "Safe Mode with Networking":
    http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

    The system restore.
    http://support.Microsoft.com/kb/936212

    Method 1:
    The restore of the system of Windows Recovery Environment (WinRE)

    (a) Insert Vista DVD and boot from the DVD.

    (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

    (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

    (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

    (e) select the Vista installation you want to repair.

    (f) in the system recovery options, click on system restore to restore the system.

    Method 2:

    Run the disk check Windows recovery environment to correct the bad sector on your hard drive

    (a) Insert Vista DVD and boot from the DVD.

    (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

    (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

    (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

    (e) select the Vista installation you want to repair

    (f) in the system recovery options, select command line and enter the command chkdsk/r.

    For the above two steps, you can see the link below.
    http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

    Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
     
    Concerning
    Amrihta.

Maybe you are looking for

  • Delete world clock to dial?

    The world clock can be removed from the default clock? I'd rather have another point "in brief" on my default clock face.

  • What is the right choice of MAXX?

    I was completing the profile, you are prompted by the investigation and asks him what kind of phone I have. The phone itself says Droid Maxx. However, the profile options are Ultra Maxx Droid or Droid Razr Maxx? I chose Ultra Maxx, but I would like t

  • How to set up the button disable tracpad?

    Tracpad disable buton is a great feature but disables it along all the sticky keys and I win key while tracpad is disabled. How can I do this?

  • System Restore does not not for Windows XP.

    my system restore does not work... as soon as I clicked on restore point, and then click on... than the others... Suddenly he become as slow... even I clikc start it does not work... If I press on cancel job press return it works... but don't work do

  • Best practices monolithic or pseudo-time clock

    Hello community, I need help. I find list in monolithic or pseudo-time GETVPN clock.