Blue screen after installing the driver for windows phone 7

Similar Questions

• Cannot install the driver for Windows Phone 7

  When I connect my Nokia Lumia 800 to my PC via USB, phone charges, and pilot the Software Installation icon in the lower corner of the screen indicates that the drivers are being found and installed.

  After a few minutes, what it says; "The software for this device has been successfully installed. Windows Phone 7 - finished, reboot required. »
  So I continue, and restarting my PC, when it restarts the Software Installation icon appears again and begins to reinstall the driver, and then tells me that a restart is required.
  Whenever I restart my PC to complete the installation, the installation process again, so I guess that the driver is eliminated during the restart?
  I haven't restarted my PC about 20 times, and every time it starts the process and invites me to restart.
  I checked the Device Manager before I have restart and it sees driver WP7 but with a yellow triangle, after the reboot, the driver is so more on the list until the icon to install the software driver in the bottom of the screen indicates that the drivers are being found and installed. And the cycle continues.
  Can anyone give me advice as to why my PC will not finish restarting after installing the driver?
  Thank you, Justin Glass

  Hello JustinGlass,

  Thank you for the question!

  I'm sorry to know that have problems you with Windows Phone 7 driver. As I understand it, you can not driver install Windows Phone 7.

  Perform the steps in the link and check.

  What to do when a device is not installed properly(Windows 7) 

  Note: Also applies to Windows Vista

  Answer to us if you are having problems with Windows 7 Driver or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Funds/wallpapers don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.

  My screen/origins don't fit down to the size of my screen after removing the Dreamscene for Windows 7 64.  I ran a 32-bit uninstall reg. by mistake and now larger images appear only partially filling to the top of the visible area of the screen.  I have a laptop of Toshiba A505 displaying 1366 x 768 with Windows 7 64. Does anyone know the registry tweaks on how to solve this problem? Thank you very much.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• After installing the drivers for windows 7 ultimate, 'Unknown device' is still on my DV7-7003tx?

  I recently installed windows 7 ultimate after formatting the drive. Then downloaded all the drivers from the Web site list. but still a "peripheral Unknows" remain in Device Manager. What could be this driver? I installed Support help, he couldn't do anything either.

  Any help is greatly appreciated

  Thank you

  Right click on the device in Device Manager, click Properties. In the window that opens go to the Details tab, use the menu selector drop down to choose the hardware id. After the first string of numbers you get.

• blue screen after installing the updated driver intel chipset

  I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

  Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

• STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

  As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• blue screen after return of 10 for windows windows 7

  I have upgraded to windows 10 Windows 7, but decided that wasn't for me then a few days later, I tried the restore to the windows button 7. After the reboot, I get a blue screen everytime I turn on the computer. repair system says it can't automatically fix it and send data. but the mouse and the keyboard does not work to send it. I am able to open it in safe mode. my relevant info here.

  minidump

  https://onedrive.live.com/embed?CID=AA381914A13F6B3D&RESID=AA381914A13F6B3D%21147&AuthKey=ABGAFjP7zd3FXew

  msInfo

  https://onedrive.live.com/?v=TextFileEditor&ID=AA381914A13F6B3D%21146&CID=AA381914A13F6B3D&parId=root

  specifications of the computer

  Windows Edition Windows 7 Home Premium

  Processor: Intel Core i5 - 4690 K CPU @ 3.50 GHz

  Installed memoery (RAM) 16.0 GB

  64-bit system operating system Type

  Info blue screen techniques:

  STOP: 0X0000007E (0XFFFFFFFF80000003, 0XFFFFF88001 5FC02D, 0XFFFFF880009A8580)

  James

  It seems that your system information file has not been shared. A link is needed.

  Avira is involved in two accidents. You can remove Avira and replace it with Microsoft Security Essentials.

  A common cause of accidents when the antivirus products are questioned is a conflict with another third party security product. Malwarebytes Pro (not free Malwarebytes) is an extremely common example that it will conflict with another anti-virus product unless it is properly configured.

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• No sound after installing the driver on windows 7

  I installed on my computer and when I install Windows 7 Ultimate all my drivers except for the sound. I have a Sound Blaster Live sound installed card and I found a driver for it, the driver is installed but there is still no sound and windows tells me there is no problem. Please help in any way. the driver that I use is a Vinyl AC97 Codec Combo Driver.

  Hi gnuttyone:

  Please check this:

  Select Control Panel > under sound select manage audio devices > see if "Speakers" have a green check mark (designates the default setting).  If another audio device is enabled, try checking "Speakers" and set as a default device, then click on apply.  See if it works then using these card drivers the Win7 built-in.

• I have a solid year Usb webcam (syc8368) and when I try and install the driver for windows 7 it never works. Help, please!

  I don't really know how old the webcam is, as this is where I downloaded the driver as the official Web site happy new year seem to take does not support the webcam more: http://www.laptop-gate.com/en/driver-usb-web-cam-solid-year-syc8368/

  The driver .inf file indicates "this file contains information for installation of digital cameras NW800 for Windows 98/2000/ME."
  Extract the files using a utility like 7zip to a temporary folder. Right click on Setup.exe in the folder and choose Properties. Click on the Compatibility tab, and in the drop-down list, choose either "Windows98 / ME ' or 'Windows 2000 '. Click on apply, OK and then double-click on it to run it.
  It may or may not always work; It is a material that is quite old, built originally for Windows 95. Compatibility mode is your best bet, in my opinion.

  SC Tom

• If Windows will send a message when she install the driver for a USB device successfully or unsuccessfully?

  As you know, the window search and install the driver for a new device (USB) coming. We can get the status of the device through Device Manager manually. but I was blocked by the following questions when trying to obtain programmatically.

  Is it possible for me to get the driver installation progress window? Or how could I get the event that she has finished the installation and the result (install has failed or succeeded)?

  Best regards

  -Alvin Hu

  Vista does not send these messages and cannot be configured to do this (progress or when it is done or if it succeeded or failed).  The only way to make sure is to plug and then, go to start / Control Panel / Device Manager and check for the device and click on it for more information on its status.  You can also check if the appliance does not work - it's probably faster and more accurate.  Many USB devices indicate their status by starting to work (a mouse begins to scroll, a USB flash drive or an external USB drive to bring the Autorun screen or appear in the Windows Explorer,...) and USB devices tend to start working quickly enough so it should not be a long wait.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical

  Windows 7 64 bit, cannot install the driver for bluetooth devices for my Motorola Droid Razr periferical. When troubleshooting try to apply the fix, after trying, it ends with a message this problem "not set"...

  I finally found the help on my own. Download and install Windows Mobile Device Center. After installation, you'll swear that nothing has been installed, but there is a. The download says it's for Vista, but it also shows Winkdows 7 under system requirements. This is from the download I used.

  Go in Device Manager for each item under the heading Bluetooth with an asterisk, double-click it. Click the tab drivers, then put to update driver. Browse my computer..., let me pick from a list... Under manufacturer, select "Microsoft Corporation". Under model, click on "Windows Mobile-based device support", and then click Next. Click 'YES' in the driver warning window. Windows will now update the driver, and he will tell you, he did it with success!

  This solved my problems. Good luck with yours.

• Windows need to install the driver for your bluetooth device

  Hello

  I own the HP Pavilion dv4t-1300 CTO Entertainment Notebook PC

  Runnin vista 64-bit for a year. affected by this bt prob 4 last 1 week...

  on switchin' on bt this error mesge

  "windows should install the driver for your bluetooth device.

  automatic update of windows I've tried

  looking for a driver to support/broadcomm hp product support

  tried installin manually

  BUT NOTHING has WORKED.

  help please...

  For this you need to 1 know which device is... Now, I was not able to find an easy way to do that, other that simply remove these devices one by one and see if the entry from Device Manager will... Or the other thing you can do, is use the reliability monitor and to see after what event the problem started...

• I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I have to manually install the driver for Aspire ZC-102, updates when I move Windows 8 to 10?

  I was struggling with this ACER for more than a year. I have do it I have back when it was still under warranty, 14 months ago. Now I've updated free online through Microsoft for Windows 10 back in early August. I had hoped that my mess was a stack of the operating system, but unfortunately, it's still a piece. However, there is no virus. I run Malwarebytes Pro full time with it has quarantined of PUPPIES as well as McAfee Anti Virus full time. I use cCleaner to keep cut up. I NEVER garguillo or browsed porn.
  I've got max 16 GB of RAM. I have very few applications other than Office 2013.

  Even if this thing was a room at the time where it was running Windows 8 and 8.1, so I want to try to make it work on Windows 10 without having to start over with a clean install. That's why I asked about the drivers.

  your ZC-102 will not have a direct drivers updated from Acer support, which means you have to rely on Windows Update by itself the drivers or get them by yourself.

  Let me give you 3 Tips:

  1) never use Registry cleaners Windows 8.x and above all, they are no longer needed

  (2) uninstall McAfee, he kills the performance of your machine, use the antivirus windows integrated, it is good and very light

  (3) If you require loading time fast on programs, think about an SSD upgrade