Blue screen after Patch Tuesday during HW failure diagnosis

Similar Questions

• Get blue screen after Windows KB968389 updates

  I got the blue screen after that almost each update of Windows, but later is the following:

  Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)
  Update for Windows Vista for x 64-based systems (KB968389) (11/08/09)

  I have a new Dell laptop Studio 15.  Do the system restore still does not work, or do not put the machine in Mode without failure.  I'm tired of spending hours trying to get my machine up and running

  Hello

  Certainly Support Dell help you change things anymore they can claim it was something
  you did it.

  Dell support
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/

  My thoughts are that it is a driver problem. Try to update your drivers, and then stop the updated driver in Windows Updates.

  -----------------------------------------

  This is my generic how updates of appropriate driver:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ----------------------------------------------------------

  My generic blue screen troubleshooting if necessary:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -----------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------------------
  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  ------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Get windows error blue screen after installation Service

  I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

  I tried to install GO twice and got the same error.

  Awating for your valuable review

  Hi piZviZ,

  Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

  (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

  (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

  (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

  I recommend just update to the latest going TO if possible.

  Kind regards

  Joseph

• Help with restarting the laptop HP pavilion g6 auto blue screen after installing VMWare Workstation 7/8

  Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to reboot the machine, and then the following error has occurred).
  Now whenever the notebook starts up, it seems to be in a reboot loop after the windows logo then get a blue screen.
  When I connect to the system using vmware safemode also working.but in normal mode it displays a blue screen after logiin screen shows.

  By turning on the restart automatic system failure off I was able to read it as the Blue error message that says:
  -

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88006EFF443
  BCP3: FFFFF88003399D68
  BCP4: FFFFF880033995C0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\031212-28672-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-62072-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288 & clcid = 0 x 0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  
  -
  Can someone give me advice on how to solve and prevent this problem?

  
  Thank you

  you have the HP-tools installed?
  They often conflict with VMware.
  Try disabling the startup of the HP-tools

• Satellite L450D - 13 X - blue screen after BIOS update

  I have the blue screen after BIOS update. Satellite L450D - 13 X worked ok before that ideas?

  Is there contact information for Support TOSHIBA?

  Hey,.

  > Is there any TOSHIBA support contact information?
  No, becaue, must contact an authorized service provider. Guys can help on any hardware and software problems and can also order spare parts from Toshiba.

  Here is a list of aspic, where you can look closer:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT

  Good luck! :)
  ?

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen after installation KB2393802 / KB890830

  Windows 7 Ultimate

  I received today a handful of updates. He finished in a blue screen after reboot. Only with the restoration of the point system that I was able to start in the normal way of restoration. I installed every update one by one and was able to isolate the problem. Each of these two updates (KB2393802/KB890830) which brings back me to the blue screen. I also tried to download and install these updates manually, but had no success.

  My impression is also that other side to this problem if you for example search KB2393802 on google.

  Is it a known Microsoft issue and if there is a fix available for this?

  Any hint is appreciated.

  Cheers, mikeych

  Hello. Has been able to solve the problem. Update some hardware (e.g. video) drivers and the system once again stable. No more appeart to blue screen after installing the MS updates again.

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday.

  Hello
  I get a page_fault_in_nonpaged_area blue screen after Windows update yesterday. To do this, that every time I try to start the system.

  Whenever I try to start it gives options to start in safe mode, safe mode with network, safe mode with prompt etc., but all these options find you on the same blue screen with the error mentioned above, then it tries to restart with the same behavior over and over again.

  Any guidance will be appreciated. Thnx Nick

  Hello

  If you meet this new,
  http://mikemstech.blogspot.com/2011/12/troubleshooting-0x50.html

• Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

  I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

  You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

  You start with a chkdsk/r from the XP Recovery Console.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Unable to start - blue screen after Windows update

  original title; on dell dimension C521... blue screen after Windows update last night 3/9...3:00am...running Vista

  Can not even go in safe mode

  Hello

  try to do a startup repair or a system restore before the update using the Startup Repair disk if you don't have a vista dvd microsoft

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  If you can make the above change how you receive updates to find the update problem

  When right-clicking on it UAC prompt you hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Choose one of these settings:

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• game problem: blue screen after 10 min

  Hi all

  my system is the 3000 N200 0769 - BDG (T5250, Intel X 3100) with 4 GB of RAM and Windows XP Professional. I know that this laptop is not designed for games, but it should not crash, if I want to play something.
  So far, I tried HL2 and Trackmania Nations Forever. Both games run under low or good enough way of details, but I get a blue screen after a few minutes.
  I installed the latest graphics drivers from Intel and all my other drivers are up to date. BIOS version: 68ET26WW
  I have not yet met problems with other programs.

  Thanks for help

  
  

• Blue screen after starting and before closing

  Lately I've been doing a blue screen after I start my computer, I log in and it loads. I also got as I turned my computer off.

  When I turn it back on after a blue screen, I get a window that says "Windows has recovered from an unexpected shutdown.

  These are the details, it gives me:

  • Signature of the problem:
  • Problem event name: BlueScreen
  • OS version: 6.1.7600.2.0.0.768.3
  • Locale ID: 1033
  • More information about the problem:
  • BCCode: 24
  • BCP1: 00000000001904FB
  • BCP2: FFFFF88006AAF8A8
  • BCP3: FFFFF88006AAF110
  • BCP4: FFFFF80003083ED9
  • OS version: 6_1_7600
  • Service Pack: 0_0
  • Product: 768_1
  • Files helping to describe the problem:
  • C:\Windows\Minidump\081510-15132-01.dmp

  C:\Users\Ariel\AppData\Local\Temp\WER-64350-0.SysData.XML

  I tried to restore, but it has not solved the problem.
  Thank you and please help.

  Hello

  I forgot to include this:

  BCCode: c5 0x000000c5<-- read="">
  * 1198.html http://www.faultwire.com/solutions-fatal_error/A-Device-Driver-has-pool-0x000000c5-

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• blue screen after computer mode alarm watch

  Hello, I get a blue screen after waking up from my computer Windows 7 sleep mode.  The message isblue problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 locale ID: 1033 additional information about the problem: BCCode: 116 BCP1: FFFFFA80068823E0 BCP2: FFFFF880057E7394 BCP3: 0000000000000000 BCP4: 0000000000000002 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1.  Can anyone help?

  Hi Jaycee,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

   

   

  Please follow the methods and the update below us on the State of the question.

   

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  For reference:

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  I hope that the information above helps you.