blue screen after replacing the battery and charger / need of Windows XP Pro disc

Hi all.

I bought a used laptop from gateway with Windows XP Professional already on it. The person I got it never gave me the disc of Windows or textbooks and it is out of warranty. I had to replace the battery and the charger after 3 months of use, and it now gives me the blue screen.  I can't enter in safe mode, it gives me just all sorts of codes for Win32 /? (different things). SYS. The blue screen also tells me if this keeps continues to go to F8(Advanced Options), and then choose the option. I called my local tech and he said contact Windows to get a disk to fix the problem. How can I do (I'm not a comp WIZ). So I try here to get any help. I am on a borrowed laptop so if you can help, please send me a personal email to * address email is removed from the privacy *. I get their

After reading the owner's manual for the NX260X (Chpt. 7, p. 72-74) I am convinced that the laptop, as previously indicated above by PML, is originally came with Windows Vista.
http://support.gateway.com/s/manuals/mobile/8511886.PDF

In addition, according to the instructions of the manual recovery (pg.74, means only available recovery Windows are re - install using the supplied DVD.) This is meaningless given that bridge claims the recovery partition was part of laptop computers sold after November 2004.  I agree that, if you decide not to try to fix the errors, you should consider Windows 7.

However, personally, I would try to fix the mistakes here before you spend a minimum of $100.00 for Windows 7. We usually have a pretty good success rate when the OP stays with the subject.

Tags: Windows

Similar Questions

  • I have to reset the charge cycle counter after replacing the battery?

    I had a defective power adapter, running on the number of cycles of load on my battery.  Thus, it no longer accepts a charge.  I have been running only on AC for over a year now, but finally decided to replace the battery.  What are the steps to reset the counter after replacing the battery?

    Replce just the battery, the battery will communicate the number of cycles to the computer. No adjustment is necessary.

  • I need to replace the battery and AC adapter of the Satellite Pro U400-160

    I have a Satellite Pro U400-160.

    I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

    Any battery for Satellite Pro U400 is suitable for mine?
    As I can't find which batteries are specifically suitable for my computer.

    (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

    Is there a quick way to check if a battery / charger are compatible?

    Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
    You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

    By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

  • 5s only displaying iPhone not correct percentage after replacing the battery.

    I bought a new battery for my aging (and is about to be replaced) 5 s. replacement was smooth and phone booted up normally display 3% battery life. After about 30 minutes of charge and always shows 3%, I rebooted. It then displays stack of 31%. After another hour of charge and still display 31%, I restarted and it updated to 87%. Now the phone (when it is plugged) keeps stopping and putting into service on its own.

    Someone has an idea of what's going on? If somehow I had not sat cable entirely, could that cause the problem? I am at a loss and looking for help!

    I'm sorry. Your phone is now completely unbearable by Apple or on these sponsored Apple forums.

    Apple sells no parts of the iPhone, including batteries, and the iPhone is not serviceable by the user.

    That said, my suspicion is that the battery you bought is complete garbage.

    Find a 3rd party competent repair shop and see if they can help you.

  • Re: Blue screen after using the Qosmio F10 recovery CD

    Hello

    I tried to use the recovery CD (XP) for my fathers Qosmio F10. I chose option 1 to return to the factory default. It seems to work fine but after it's over he says remove the CD and reboot I did. It was then restarted but flashed a blue screen for a split second before restarting. I did not see what is the Blue error screen, as it flashes up too fast. Then, it takes me to the configuration screen and asks me to choose whether to start Windows normally or SafeMode etc. All options give me the same result.

    He said if I choose to boot to the last known good configuration:

    "windows was not start because the following file is missing or damaged:
    \WINDOWS\SYSTEM32\config\SYSTEM

    You can try to repair this file by starting windows setup using the CD-ROM Moose
    Select 'r' in the first screen to start repair. "

    Of course, I do not have an original Windows CD, I just the recovery CD.

    I checked to spit on the disc but its perfect.

    I have a complete backup of all of the HDD on an external USB disk if that would help?

    Don't know what to do next?

    So just in the summary;
    You have checked the RAM, HARD drive and tried to install the Windows operating system several times but without success

    Well, maybe you should try to boot from a Linux live disc to check if the BSOD appears again?  :|
    How about Windows XP installation by using the diskette in MS Windows.
    It s worth a try

    Last but not lease, you will need to replace the memory modules RAM and HARD drive
    I mean the different HARD disk and RAM tests are useful, but it will not replace tests using new parts
    I think that this should be done by a qualified technician because he could test it before buying spare parts

  • blue screen after installing the updated driver intel chipset

    I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

    Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

  • STOP 0 x 00000050 blue screen after installing the Windows security update [Vista]

    As the title suggests, after installing an update of security on Vista, I got a blue screen on reboot. Error code 0 x 00000050. I see the suggestions of some places on the internet saying that I have to go in safe mode, but even when I try this I get the error.

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Resolution of the different native screen after replacing the LCD screen

    I recently had my HP Pavilion DV7 laptop screen replaced after getting a crack in it. He was sent to HP for repair and she came back yesterday with a new brand, screen exactly like my old. While the screen looks the same as the old, when I started, it is a completely different resolution. On the old screen that broke the (maximum) native resolution was 1600 x 900. However, on the new, the (maximum) native resolution is 1920 x 1080. I'm still able to go back to 1600 x 900, but when I do the text becomes blurry. I suppose I could use the 1920 x 1080, but it would take a lot of time to get used to it, especially since I am using 1600 x 900 for two years. So my question is, why is there another native resolution and is it possible to fix the blur with 1600 x 900? I don't understand why all this is happening, because the screen looks exactly like my old, same size and all. I don't know of changes to software that took place or the other, all what has been messed with to my knowledge was the physical display.

    Thank you!

    Hello:

    From the sound of it, HP has replaced your original screen with better resolution by mistake.

    There is nothing you can do except to report it to the support of HP and ask to the screen to be replaced by one of the same characteristics as yours, or you will have to get used to the larger screen real estate and more small text and objects, or use a different resolution which may be more attractive to you.

  • BlackBerry Smartphones wallpaper won't stay on the home screen after pressing the battery

    I'm really starting to get annoyed with this phone!

    My wallpaper will not stay on my homescreen after a battery pull or a software reset! I don't understand! This is not new in terms of programming! What is the problem? Is there any solution for this or I'm stuck affecting my wallpaper everytime I reset my phone? Go RIM! It is a ridiculous problem that should have been fix before going out the phone! same for 5-10 sec freeze after you enter your security password to unlock the phone! As well as the slow transformation of cpu for some activities! I'm sticking with this phone at the moment, but I don't have a great feeling for this phone seriously!

    Does anyone know what I should do to fix my bottom screen problem?

    Hi once again, everything

    I have foud a solution for my problem!

    By installing the application to the os 6 given by the carrier, I was able to solve this problem! So, I backed up my data first and then downloaded from the EDGE of the application OS 6 AT & T then re-installed and erased all the data! After I reloaded the data I needed and tested! Now my loads of wallpaper is a reboot of the device! But I always saved my image on the internal memory of the phone and not the micro SD! I don't know if you leave image on micro SD so it will again make the same question!

    Thank you all for the help!

  • After replacing the PSU and GPU in my HP Pavilion desktop computer, the wifi stopped working.

    I'm upgrading my pc, I plug a new PSU and video card.

    After successfully, I replaced and installed, I booted up my PC, but it showed that none of the networks or wifi connections are available.

    I read that maybe it's something to do with the antenni?, I noticed something that looked like antenni tangeled upward in the power supply cables, I did not use them. but I have no idea what could be the problem.

    Thank you for the information, @henry321.

    Yes, I suggest to leave the side panel on the computer and then move the led in the case and look at the signal.  You may need to route through an opening in the case is outside of the case.  I think I read that it is the best way to get a good signal.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Replace the battery and the hard drive or buy a new one?

    My 2010 MacBook Pro has stopped working, close and wouldn't start even in safe mode. I brought in a tech support company and I was told that I needed a new hard drive and a new battery, which, as well as data retrieval and transfer would be about $480. I bought my MacBook Pro in 2010 is a little more than 5 years so I guess what is expected. The activity of tech support people told me that, theoretically, the HDD could last even 4-5 years and everything else on that they conducted tests the past. I'm on a budget, and $ 500 is a little money for me to spend, especially if I have to buy a new laptop in a year or two.

    If I can get my MacBook with the new hard drive and the battery still 3 to 4 years, I think it will be worth it. So, I ask you your opinion on whether or not it is better for me to replace the hard drive and the battery or buy a new laptop (probably a MacBook Air).

    Thanks in advance for your advice!

    If you fix the old laptop, you will be able to sell it on Craigslist to help put off the purchase of a new Mac.

    Otherwise, it is dead in the water.

  • HP 3050 printer prints not clearly even after replacing the color and black cartridges...

    I have a problem on a HP 3050 printer all-in-one that is just a year old.  The printer is not used for several months and it was working properly before.  I tried to print a page and had missing horizontal print, I tried to clean the print heads and it did not help.  I replaced the cartridges with new ones and noticed that the ink levels showed that had the old cartridges.  Black was half full and the color was full.  It wasn't new purchased in-store cartridges refills.

    I tried to force an alignment page on the maintenance of the printer screen and this failed repeatedly, undetected alignment page.  I did some research and even tried to clean links them / connectors than cartridges fits.  Looks like that leaving the cartridges for several months in the printer was bad and that I'll need to ge a new printer.

    Thanks for the tips,

    plarr

    document here can help to solve the problems of print quality in your Deskjet 3050 has. I also suggest to clean the cartridge and printer electrical contacts as described in this document (for another series of cartridges, but same principle).

  • Time used to synchronize even after replacing the battery.

    Original title: time synchronization

    my time will not sync I thought I was my batery so I replaced it but it was not she but when the battery is out of the plateau mouther it would sync I tried all servers. I also took the new battery and checked voltage

    Hi Dlog,

    You can visit the manufacturer's Web site to install the latest version of drivers for BIOS and check if it helps.

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    Updated a hardware driver that is not working properly

    Hope this information is useful.

  • Desktop computer crashes frequently. Sometimes the blue screen appeared on the start and the unexpected shutdown of the system.

    It's the hijackthis log, you'd appreciate it could analyze and advise the problem of my office:

    [Deleted HijackThis report]

    Hello

    Try these troubleshooting blue screen techniques.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    information on errors such as STOP and information such as IRQL_NOT_LESS_OR_EQUAL codes or
    PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • I get the blue screen after unplugging the USB device

    Hi, I recently got a new laptop and have blue screen problems. I've updated all my drivers with DriverGeniusPro and windows update, but whenever I unplug my mouse for my laptop blue screen USB slot. I also noticed that there were different reasons given on the blue screen. Here are a few that happened today;

    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 113
    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 112
    https://SkyDrive.live.com/redir?RESID=80CF765750692818! 111
    Help me!

    Well, I don't know who it was but I installed SP1 and uninstalled the BlueEye Macro and the problem seems to be fixed! As soon as you mentioned the issue of BlueEye, I was convinced that it was the one you mess with pilot virtual and things to mouse input during the installation. Thank you very much for the help, I appreciate a lot :)

Maybe you are looking for

  • MagSafe 85W defective twice 2 each period of 1 year

    I have the model of MacBook Pro retina 15 inch end 2013 mono GPU, and it's 2 MagSafe 85W power adapter is defective for the 2nd time in one year. The original one supplied with the MBPr was faulty, a year after I bought my MBPr in June 2014, so I bou

  • Libretto U100 - Alternative to the lack of light 'Caps Lock'

    Strange that the U100 has no witness "Caps Lock". The small keyboard meant that, at first, I was still pressing caps lock shift when I tried to press the letter "a". Now I'm used to, I can type on it almost as fast as on my main laptop (Tecra S1) is

  • Pavilion P6-2378: keyboard driver

    Hello, I have just completed an update of Windows 8 and lost the on-screen order of volume that would normally show on the upper left of my office to win 8.  I was wondering if someone could provide me the SoftPack containing the keyboard for my Pavi

  • After Windows Update, is now silent erratic speaker (flickers power button) and sometimes erratic behavior of the mouse

    I noticed a few days after the restart after an update of Windows (a few weeks of updates at the same time evidence) on my old laptop Dell M60 when I hit the mute button would begin just flashing power continuously, but there is ore that turned off. 

  • Replacing hard drive for acer v5-123

    Dear Sir. My v5-123 Acer hard disk stops working suddenly and I want to buy a new so please could you tell me about the specifications of the hard drive for this model Thanks in advance