Blue screen after the start of a game

Similar Questions

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 8530p blue screen after the awakening of the mode standby.

  Hello.

  Windows 7 Enterprise 32-bit. (EDITED)

  A user has a problem as his computer blue screens after he was awakened to "sleep" mode and the other thing is this problem is intermittent.

  The error message I saw said that it was a KERNEL_DATA_INPAGE_ERROR STOP error message is 0x0000007A and the second parameter was 0xC000009D.

  According to http://msdn.microsoft.com/en-us/library/ff559211 (v = vs. 85) .aspx this type of error indicates - "0xC000009D or STATUS_DEVICE_NOT_CONNECTED, indicates defective wiring or in bulk, termination or that the controller does not see the hard drive."

  Hard disk, I ran the tests integrated in the BIOS, online tool check the system of HP for laptop PC (http://h20239.www2.hp.com/techcenter/HP_SystemCheck/hp_syscheck.htm) and same Seagates own Seatool because there is a Seagate drive in the machine. All these tests said nothing about a problem with the hard drive.

  The online tool, said there is no update available on the BIOS drivers.

  I even had the user to remove the hard drive and put it back to make sure he wasn't a wire loose, bad connection or something like that.

  I phoned helpdesk of HP where I live and I told him this and he said that it is most likely a software problem.

  So so I need help to find out what software might be behind this error.

  I can't provide shocks either, given the error and blue screen also says "dump of physical memory failed with status 0xC0000010.".

  So is it a known software that could be the cause of these problems?

  EDIT: As pointed out by erico, I forgot the information about this operating system. That's why I added this information at the top of my first post.

  Sorry I have not responded earlier.

  It seems that the problem is solved since the user had no blue screens for over a week now.

  The solution was quite simple: reinstall on a new hard drive, even if each test drive, I ran on the subject, said the old drive was ok. This includes BIOS integrated HP and test online, chkdsk in Windows 7 and Seagate tool own Seatool.

  Best regards

  Ljungan.

• X 200 with ssd OCZ blue screens at the start of the docking station

  The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

  The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

  I tried to update the firmware on the ssd using this utility

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

  The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

  I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

  Any ideas or suggestions are greatly appreciated.

  Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

• Blue screen at the start of WinSrv2008r2 recovered from the backup of windows virtual machine image

  Hello

  At first, everything seems fine:

  -to create the new virtual machine

  -startup disc for instalation of Windows Server 2008 on this VM

  -Select "Repair system" and point the backup image file (full backup - made with standard Windows backup tool)

  -system recovered successfully.

  But then, when the system restart recovered fresh - start start Windows normally - and suddenly it is blue screen with the error 0x0000007b

  IMHO, this first initiated boot of the recovered system trying to twist something in the special part of the disc and he cannot (because it's a virtual disk?)

  Is it possible to recover the system windows image file system server to virtual classic?

  Thanks in advance for all voice :-)

  Greetings,

  RA

  Welcome to the community,

  the error message is related to the controller to start the virtual machine, which is different from the original system, and its drivers are not loaded in Windows. What you try, it is to use the free VMware Converter and run the option "Set up the Machine", which should inject the necessary drivers in the virtual machine. Before doing this, please make sure that the Windows 2008 virtual machine has the default "LSI Logic SAS' controller configured in its settings.

  André

• Not start only progresses to double blue screen after the force-feeding down

  After many troubles with Trend Micro and following their instructions, I was to open a session and turn it back on.  However, first disconnect and restart options did not work so I had to cut the power.  When turning it back on, the PC got to a screen with dark blue strips on top and bottom and Microsoft XP logo in the blue middle panel.  After trying various boot options in different modes of security etc and running drive Diagnostics (all past) the PC arrives in the same condition every time.  Dell won't talk to me given that all three of my PC are too old, according to them.  I saw on their site where there was such a problem after the update from another provider visus (AVG) where a CD of XP Windows Setup specific should be used with the Recovery Console to be run.  It's something on the order of what the Trend Micro tech said I should do.  With the exception, since Dell won't talk to me I can't get the CD.  With all three PC I bought home, actually provided with a CD because "your new computer does not require an operating system CD".  How can I get such a CD for XP or is there another way?  SW_Engr

  How does this relate to the features of Windows Update?

  If you have purchased the Dell with Windows XP (?) computer pre-installed, Microsoft will NOT provide replacement discs.

  If your computer came with these discs, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do a clean install (AKA destructive recovery) of Windows. See http://support.dell.com/support/topics/global.aspx/support/kcs/document?c=us&l=en&s=gen&docid=DSN_181316&isLegacy=true

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• blue screen after the alt tab game while

  Recently, while I play League of legends. I'll have at least a blue screen a day then I try alt tab during a match.

  Here is the information that I have collected using the viewer of the blue screen.

  ==================================================

  Dump file: 012513-24554 - 01.dmp

  Crash time: 25/01/2013-17:22:06

  Bug Check String: IRQL_NOT_LESS_OR_EQUAL

  Bug check code: 0x0000000a

  Parameter 1: 0x82e2608f

  Parameter 2: 0x00000002

  Parameter 3: 0x00000008

  Parameter 4: 0x82e2608f

  Caused by the driver: halmacpi.dll

  Caused by the address: halmacpi.dll + 5ba9

  Description of the file: Hardware Abstraction Layer DLL

  Product name: Microsoft® Windows® Operating System

  Company: Microsoft Corporation

  File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)

  Processor: 32-bit

  Plant address: ntkrnlpa.exe + 40cdb

  Stack address 1: ntkrnlpa.exe + 1db08f

  Stack address 2: Wdf01000.sys + c4d5

  Battery 3 address: Wdf01000.sys + 9428

  Computer name:

  Full path: C:\Windows\Minidump\012513-24554-01.dmp

  Number of processors: 2

  Main version: 15

  Minor Version: 7601

  Size of the dump file: 184 816

  ==================================================

  Hope that this information would be useful. Please help, thanks!

  Simon

  You should always tell us you have a MAC

  Related to the KeyMagic.sys of Inc. Apple keyboard driver.  In particular, an older one.  Your magic key is 2008.  I re-install the latest version available and update these drivers
  
  wdcsam.sys Wed Apr 16 04:27:02 2008 (4805B 856)
  Version 2008 driver Western Digital external drive RAID Manager [br] has experienced problems BSOD in Win7
  http://www.carrona.org/drivers/driver.php?id=wdcsam.sys
   
  IRFilter.sys Wednesday, July 2, 15:53:08 2008 (486BDCA4)
  IR receiver driver for Apple Inc..
  http://www.carrona.org/drivers/driver.php?id=IRFilter.sys
   
  nvmfdx32.sys kills Jul 8 05:17:12 2008 (48733098)
  nVidia Networking Controller Driver (chipset nForce driver)
  http://www.carrona.org/drivers/driver.php?id=nvmfdx32.sys
   
  nvsmu.sys kills Jul 22 13:21:06 2008 (48861702)
  nVidia nForce System Management Controller (nVidia nForce chipset driver)
  http://www.carrona.org/drivers/driver.php?id=nvsmu.sys
   
  KeyMagic.sys Wed Mar 18 17:00:24 2009 (49C160E8)
  Bootcamp 3.0, Mac OS X 10.6
  http://www.carrona.org/drivers/driver.php?id=KeyMagic.sys
   
  MacHALDriver.sys Thursday, May 21, 15:02:35 2009 (4A15A54B)
  Apple Mac pilot HAL
  http://www.carrona.org/drivers/driver.php?id=MacHALDriver.sys
   
  ATHR.sys Fri Jun 19 01:18:41 2009 (4A3B1FB1)
  Atheros Extensible Wireless LAN driver for network card CB42/CB43/MB42/MB43-D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev.) (B) discontinued 2008
  http://www.carrona.org/drivers/driver.php?id=ATHR.sys
   
  CS420x86.sys Monday, June 29 at 21:11:44 2009 (A 4, 496650)
   
  -This driver was added to the DRT from this race. Please search for Google/Bing the driver if you need additional information.

  AppleMNT.sys Fri Jul 31 00:25:45 2009 (A 4, 727249)
  Bootcamp 3.0, Mac OS X 10.6
  http://www.carrona.org/drivers/driver.php?id=AppleMNT.sys
   
  AppleHFS.sys Fri Jul 31 00:25:48 2009 (4A72724C)
  Bootcamp 3.0, Mac OS X 10.6
  http://www.carrona.org/drivers/driver.php?id=AppleHFS.sys
   
  KeyAgent.sys Fri Aug 14 16:08:57 2009 (4A85C459)
  Apple keyagent pilot
  http://www.carrona.org/drivers/driver.php?id=KeyAgent.sys
   
  AppleBtBc.sys Wednesday 2 dec 20:08:10 2009 (4B170F7A)
   
  -This driver was added to the DRT from this race. Search Google/Bi

• HP M9000: Black screen after the "Starting Windows" logo and the windows on the screen

  I just gave me a m9040n HP Pavilion Elite with a Q6600 CPU, graphics card ge force and two 500 GB HARD drives in.

  When I starts it up it seems to be ok the HP blue screen will lights up at the start of the BONE and displays "starting Windows" on the screen with the windows logo. and then it goes to black with just the cursor on the screen. (Vista) So I know WHAT BIOS is ok, the graphics are windows allowed from.

  I went to the HP system F11 recovery and he seems to think that all is well... Very confused ideas?

  Thank you, Glenn...

  400workstation

  It looks like one or more of the boot loader files has been corrupted.

  You need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.
  
  You will need to create something called a CD-ROM of repair of Win7. This will repair the boot loader files, and if that is the problem, your PC will start OK after that.  Yes, it's for Win7, but Vista uses the same bootstrapper, so you can use Win7 to repair the Vista bootloader files.
  
  The file you need can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/
  
  When you download this file, it will be an ISO file.
  
  To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/
  
  Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.
  
  To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/
  
  Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
  -------------------------------------
  
  Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html
  
  You will probably need to run Startup Repair three times for him to fix all the boot loader.
  
  Once completed, your PC should start OK.

  If it isn't, then some files of the operating system has also been corrupted and the only way to fix it would be to perform a system recovery - which if F11 does not work, but a recovery from the PC to its original using recovery media state.

  Problem there is that HP no longer wears a recovery media for the Vista PC, so you should check to see if these sites still have it: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• Re: Satellite L650-165 - blue screen during the video playback or games

  Hello

  In October, I bought my L650-165. However, since then, I was faced with the blue screen of death. This happens when either video playback, streaming video or play Football Manager 2011 (video game).

  I think that my problems are all the graphics card related. However, I am really at a loss. I've always used Tosh laptop computers but this problem starts to grate. I keep coming back to my trusty 5 years Equium!

  I'm not that great with Windows 7, so I would appreciate any pointers or possible solutions.

  Thank you

  Cess

  Hello

  I had the same problem with my a500 due to a graphics card driver. Try to update:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Blue screen after the installation of the Radeon HD 3450 video card driver

  Original title: I get a blue screen on vista after installing the drivers for my radeon HD 3450 graphics card, windows 7 works very well

  Hi all, hoping someone can direct me towards a solution...

  Have a 2.8GHz Celeron RAM 2 GB machine, install videocard ATO Radeon HD 3450 AGP.

  Equipped with Windows Vista 32-bit, install ATI driver from the ATI site, all installs OK but on reboot, we get BSOD.

  HOWEVER, same machine, running Windows 7 Professional, all installs them and works fine! (it is the same driver ATI for Vista and 7).

  We tried a new installation of Vista, even tried Vista business and Enterprise editions. Same results.

  Latest system drivers and not BIOS updated avaialable. Vista installation had Enterprise with SP1 and enterprise with Service Pack 2 included.

  I have google, downloaded ATI drivers, reloaded OS and drivers, and little matter what we try Vista causes BSOD and 7 works very well!

  If we try the latest beta version of the ATI driver, he refuses to detect the card in Vista, everything works fine in Win 7.

  Any suggestions? Please? !!

  Hello

  What is the exact error message you get when the blue screen?
  Step 1:
  Try to start the computer in safe mode. Check out the following link.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Step 2:
  You can try to disable the video card. Follow the steps.
  (a) click Start.
  (b) in the Search tab, type devmgmt.msc and press to enter.
  Expand c) display adapter and right-click on the Radeon HD 3450 video card.
  (d) click on disable.
  (e) now, close the Device Manager window and restart the computer.
  (f) attempt to start the computer in normal mode.
  (g) go to control panel.
  (h) select programs, and then click programs and features.
  (i) select the package for the ATI Radeon HD in the list and uninstall it.
  (j) restart the computer.
  (k) to start the computer in normal mode.
  (l) go to the Device Manager.
  (m) right click on the graphics card.
  (n) to select Properties, and then click the driver tab.
  (o) now click on roll back driver and check with the question.
  
  You can also check out the following link to download and install the two packages from the link.
  
  If you are using Windows Vista 32-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista32.aspx
  For Windows Vista 64-bit, see the link.
  http://support.AMD.com/us/gpudownload/Windows/legacy/pages/legacy-radeonaiw-Vista64.aspx
  
  You can provide us the mini dump file. We can analyze the mini dumps if make you it available to the Skydive or other file sharing sites (such as Media Fire). If you have problems downloading the mini dumps copy
  for the office or in the Documents folder and download them from there.
  ZIP or download the content of the C:\Windows\minidump
  Use in parachute to download files and post photo/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Blue screen after the computer crashes

  original title: BSOD: Blue Screen Of Death

  My PC has run completely fine until here that is 2 years from the date of purchase. But now these BSOD concern me. The computer crashes, the graphics have become distorted [I am unable to read anything] and then GRASS comes... I can't read because it is very blurry... Please help me... I can't read the minidump files ' coz I don't know how we debug tools. Please help me!

  Hello

  The first couple of line indicates a problem with your Nvidia video drivers, so that would be the starting point. Download and install a fresh game, update for your system here:http://www.nvidia.com/Download/index.aspx?lang=en-us

  Uninstall the current set through the configuration/programs and features Control Panel, then reboot and install the new set. Do not install only the new on the 'old'.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Blue screen after the work of completely P2V conversion completed

  Hi all

  I have try the P2V of Powered - on Windows XP conversion.

  The conversion work was finished with the status "completely."

  However, after that, when I try to power on the target of the Win XP on ESXi machine, the machine displays the blue screen and does not start.

  If there is a way to solve this problem, would you please let me know?

  [more info]

  1.

  I chose the installation of vmware tools option in the conversion with VMware Converer autonomous steps.

  However, it was not installed in the target machine Win XP on ESXi.

  2.

  In this Windows XP P2V conversion, I can always find a certain caveat on the sysprep file in Converter Wizard.

  The warning is "Impossible to locate the necessary Sysprep files."

  Due to the expiration of the period of support for Microsoft's Windows XP, I can't do anything about this warning.

  The default disk for XP controller is BusLogic, specially for 32-bit Windows. It might work with LSI Logic, too but with SAS - hardly.

  The warning of sysprep is on the customization steps. If you do not it - ignore it.

  In regards to the VMware tools - you can install later vsphere client, after fixing the boot

  HTH,

  Plamen

• A60: Error Message blue screen after the recovery procedure

  I have an A60 and in the course of the last 3 months, I ran the recovery of 10 to 15 times disc, windows installs fine, then a few days later the computer either freezes and gives a blue screen of death, when you try to turn it on, or it turns on and comes up with a message saying "Windows Explorer has encountered a problem" and then completely stops responding , or gives a similar message on the subject of what we call the Dr. Watson debugger core and similarly, unresponsive, now. After trying to format and analysis as well as on my knees and beg the computer please please please work, I'm out of ideas, the hard drive is perhaps the problem? is this a common fault of A60?

  also in a completely different topic, where can I get a new 'c' key, mine keeps falling off the coast for some reason any.

  Hello

  The blue screen appears usually due to hardware malfunction or bad software.
  If you, I suggest that there could be something wrong with the hardware. Of course there is also something wrong with the HARD drive. But to be 100% sure, you should contact Toshiba service. He can do some diagnostic tests.
  You can also order the additional keys of the Toshiba service partner who is responsible for your country.

• Satellite P20-771: Error Message blue screen after the reinstallation of the OS

  I have a portable Satellite P20-771 / Pentium 4 3.40 GHz (800/HTT) / XP Home / 17' with nVidia Geo5700 driver.

  As I had a few problems with the software, and I reinstalled everything using the supplied CD. Unfortunately the canned computer malfunction sent me blue screen errors, which are due (it comes when I sumbit error to Microsoft) to device drivers. I've updated everything (I hope) of the Toshiba page, but I'm not an expert and I'm worried that I missed something or that something has not been loaded in the right order or that the parameter is incorrect.

  I thank in advance for your help

  Roberto

  Hello

  I read in this forum that the Blues screen error message appears due to hardware malfunction or malfunction serious software.
  Usually after installing the new OS since the portable Toshiba Recovery CD should work properly.
  It is not easy to say why the blue screen appears on you laptop.
  Maybe you can post the content of the error message in this forum, and maybe we will find a solution.

• Satellite T110-121 - blue screen after the installation of recovery

  Hello everyone! My name is Melanie and I want to apologize for my English: I m french! I have big problems on my laptop, I will explain:

  I had to install windows yesteday and I used the partition recovery, all worked but the last seetings, my computer fixed: blue screen. I have it reboot and I can log in on windows, now Toshiba software run at the end of the installation: install wireless and bluetouth BUT this software always get it fixed my computer or my screen is frozen, or screen of blus.

  Then, I removed it from the startep of the software list and tried to install the drivers I found on the Toshiba site but for the wireless, I run the software add anything, and for the bluetooth it says error 2753: setupdiu.exe is not marked for installation.

  So I m really disappointed, could you have some tips to help me please? I thought reinstall windows, but I can't reach the recovery: whose touch is?

  I m looking forward getting help.

  My best,

  Mel.

  Hey,.

  I think that something goes wrong when installing recovery and thus you get a blue screen and can t install the WLAN software. The best option would be to run the recovery process.

  But why you can't reach t recovery more? I mean you can use HARD drive recovery as often as you like and you can start if you enter Windows Advanced Boot menu (press F8 before Windows starts) and choose fix my computer. Select Toshiba HDD recovery, then follow the instructions on the screen. Windows will be reinstalled with all drivers and tools.

  Check this box!