Blue screen after trying to update Windows Vista

Similar Questions

• Blue screen after the recent updates of security for Windows XP SP3.

  I got following error messages "Blue screen" after the latest updates from Microsoft:

  0X0000007E (0X8053355E, 0XBA4CB50C, 0 X 80000003, $0XBA CB208). I tired to run in all modes of SECURITY but still had the same problem. I ran Dell diagnostics and it came with no error in memory or hard drive. I have a Dell Inspiron B130 w/2 MB of RAM. Does anyone have a solution? The laptop came with no CD boot.

  @Jazzman1962 and flowie,

  I suggest you follow the steps mentioned by 'LThibx' in the http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/73cea559-ebbd-4274-96bc-e292b69f2fd1thread.

  -------------------------------------------------------------------
  Naveen
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 80070032 trying to update windows Vista

  Error code 80070032 trying to update windows Vista Hi I forgot I'm doing an update of windows & cant I disc clean up as well as other tasks that can do?
  can you help me please? Thank you please hurry my e-mail address below
  E-mail address is removed from the privacy *.

  ERROR_NOT_SUPPORTED 80070032
  Failed to create the directory or file

  Is this a sudden, new problem or a course?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen after trying to boot vista, no given safe mode option

  After trying to repair windows, as he asked me when I turned on my computer, my HP with Vista 32 bit at startup now automatically goes to a black screen with a white loading bar indicating "windows loading files. then eventually goes to a clear blue screen with only my cursor available to use. Any ideas? Also while booting, I have more option to enter SafeMode etc.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. How have you tried to repair the Windows Vista operating system?

  I suggest you try to do a restore from WinRE (Windows Recovery Environment) system and check if it helps.

  Insert the installation disk to perform the WinRE .

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

• Blue screen after installing security update KB2419640

  After I installed Windows 7 security update KB2419640, I get a blue screen after reboot and finally do a system restore.  Can someone explain how to get this update to work? I have tried several times now and it installs by is kind of lonely. Don't know what else to do.

  TIA

  See this post in the Windows Update forum: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/10eb9b57-aada-4c49-acf1-b81f016b1ed0

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Dynabook G9: Changed Toshiba start screen after trying to update BIOS

  Good day, everyone!

  It is not a problem, but I would like to know how it could happen so I a "Dynabook G9" laptop that was purchased from the Japan. It's like satellite 5200 series... When I turned it on, the logo "DYNABOOK" displayed and computer kept loading... a few days ago, I have tried to update the BIOS but downloaded the Russian from Toshiba Web site for 5200 series update... cause there is no BIOS update on the Japanese site...

  When I run the downloaded file, it says I have BIOS v 1.40 and it can not be updated v 1.50 because it isn't for my laptop... so my idea to use the update for European laptops did not work... but the question is that now I have "in touch with tomorrow Toshiba" logo instead of "DYNABOOK" and how it could happen? And how can I get it back?

  Computer still works fine... but... I do not know... I like just the "DYNABOOK" logo more :-)

  P.S. maybe it changed not after trying to update the BIOS (I'm not really sure) but it has certainly changed.

  I already wrote something in the other topic and because of that I just want to say hi again ;)

  Dear Andrey problem is that Toshiba does not portable as produced big world and there are several global areas: U.S. market area EMEA (Europe-Middle East-Africa) and also in Asia. I am not sure if the Japan is separately but I think it is.

  Also books produced in all areas are suitable for each other. Because of this, you cannot mix BIOS and Toshiba has designed tools and utilities. I think that in most cases, it can work, but it is not for sure. Support page for notebook EMEA, it is recommended to use the BIOS and other stuff explicitly of Toshiba Europe. For US books there are all the drivers, tools and utilities on the Toshiba U.S. support page.

  Now, you have Japanese laptop and use non - Japanese BIOS or software. For me, it makes sense that some changes will happen. I don't think anyone has good experiences with it, but you should be happy that your laptop works well.

  All that s what I can say about it.

  In any case, good luck and have fun with your toys!

• After application of update Windows Vista SP2, FSX will not start

  FSX is not started after that I applied Windows VISTA Sp2. When the process is considered to be a task manager, FSX.exe seems to CPU to make loops. Are there not the method to solve something?

  Hi BuyIntel,

  Thanks for posting on the Forum of answers.

  I suggest to backup your saved games and reinstall the program.
  Something in the Service Pack may have corrupted some aspects of FSX, this should solve it.

  I suggest also to visit your video card manufacturers website to download the latest drivers and re-installation of the unit.

  I hope this helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Blue screen after the automatic updates in Windows Vista

  Automatic updates caused a blue screen that says STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, missing, or not accessible in writing.

  Ideas: I don't know what happened when it restarted it started this

  • will simply not get to start it to connect screen or system repair
  • Error messages: STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, absent, or not writable. :
  • Recent changes made to your computer: just the updates that was supposed to be important
  • What you have already tried to solve the problem: System repair, restoration of the system or safe mode do not work

  in this case, restore your netbook factory settings. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After the repair of the blue screen, have to choose between Windows Vista or Windows recovered at startup

  Recently had a blue screen of death issue and had to repair windows vista. Now every time you start computer I have to choose between windows vista and windows recovered. How can I remove the system recovered as I start successfully on windows vista option every time.

  rtoakey

  Hello
  To manually remove the entry from the windows recovered in Windwos Vista follow the steps below.
  (a) connect to the computer.
  (b) click Start
  (c) type msconfig and press ENTER.
  (d) click the Boot tab.
  (e) select the entry that reads Windows recovered or reclaimed Windows and then click on remove.
  (f) click Ok
  This will remove the entry of the windows recovered from the trunk.
   

• blue screen after installing the updated driver intel chipset

  I have y510 42q. After you install an update for driver chipset intel from windows update, I have blue screens while watching videos. What should I do?

  Install previous versuin or reinstall the latest version. Check as fresh versions of DirectX and video card drivers.

• I tried to update Windows Vista Home Edition basic and now it says my version of windows is not genuine, even if I enabled it for years.

  I got my version of windows activated for about 3 years.  I did a bunch of windows updates yesterday when he arrived to service pack 2, it installed and most of it then told me that my version of windows is not genuine.  I'm also infallibly get error messeges that my installer of Modules of Windows has stopped working.   I went to the windows genuine activation tool, and he said he couldn't tell if my windows was genuine or not.  I have a sticker with the product key on the side of my computer.  I tried to call the Activation Center by following the instructions to get the phone number, but my windows vista won't take me to the screen with the support of activation phone numbers.

  Can I get the phone number for support?

  Thank you

  Lisa

  Hi, Uridicy,

  Try to post here:

  http://www.Microsoft.com/genuine/diag/

  Microsoft Product Activation Solution Center

  http://support.Microsoft.com/contactus/cu_sc_prodact_master?WS=OAS#TAB4

  How to find the phone number for Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929/

• My computer tried to update windows vista service pack KB948465 several times but keeps fault (8024200d fault code) how do I get this to install?

  Every thing downloads and prepares to install, the installation begins and the box pop up advises to close all programs and installation can last an hour or more with many stops of the computer. I followed the instructions but it still fails.

  Error 0x8024200D code is:
  SUS_E_UH_NEEDANOTHERDOWNLOAD
  The Setup program requires more data to download

  See: http://support.microsoft.com/kb/948465 for more information
  and
  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  Can download the complete file here (for single pcs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=a4dd31d5-F907-4406-9012-a5c3199ea2b3&displaylang=en TaurArian [MVP] 2005-2010 - Update Services

• Blue screen (STOP) errors that cause Windows Vista to shut down (blue screen of death)

  I get this on a blue screen stop code and I can't find what this code means someone can help me please v

  00000101 0 x (0 x 0000000000000061, 0 x 0000000000000000, 0xffff98000c6e180, 0 x 0000000000000001

  Best advice I've seen on this error (here: http://www.sevenforums.com/crashes-debugging/35427-win-7-clock-interrupt-bsod-101-error.html#post356791 )
  What you are looking for will be in one of the following categories:

  (a) the BIOS bug
  (b) a pilot whose activity is at the origin of the processor target lock
  (c) a defect in hardware (temperature, voltage, dust, RFI, pure and simple borkedness...)? I also wonder about default CPU)
  Therefore, check the drivers
  Then check the inside of the species (temperature, voltage, dust, etc.).
  Then run tests of stress of material

  Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
  Try this free stress test: OSS - GIMPS

  CPU Stress Tests:
  Just do 1 or 2 tests in most circumstances. I have not used one of these tests myself, so I listed everything I could find.
  - http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=19182&lang=eng
  - http://7byte.com/index.php?page=hotcpu
  - http://www.7byte.com/index.php?page=burnin64
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://www.fossiltoys.com/cpuload.html
  - http://www.pcworld.com/downloads/file/fid, 7146-order, 1 page, 1-c, alldownloads/description.html
  - http://www.overclock.net/general-processor-discussions/657486-cpu-stress-test.html
  - http://majorgeeks.com/CPU_Stability_Test_d215.html
  - http://www.xtremesystems.org/forums/showthread.php?t=201670
  -l' or the tests suggested at this link are bootable: http://www.techsupportforum.com/forums/f15/headless-cpu-stress-testing-393435.html#post2232929

  Then try to replace parts.
  Then look for the version of your BIOS to see what changes have been made.

  Text courtesy of http://www.carrona.org/ Usasma

• 3 machines different blue screening after the latest updates.

  Original title: others recently have Windows XP are startup problems? 3 unrelated to computers are suddenly loop and unable to start in the mode of

  Three unrelated to computers (at home, in the work of the spouse and aunt) using Windows XP (Home and Pro) suddenly refused to start in any mode - all in the last week. They simply loop over and over again, regardless of the F-button options that I try. Is anyone having this problem, too, or is it just a coincidence?

  We all have good update security protection - Trend Micro, and we send each other or share files.

  I'm working on rounding to the top of each of our installation discs in order to be able to use the option "Repair" Windows XP. Meanwhile, any input from there?

  Hello

  I posted a response earlier, but for some reason it has not shown any. Big problem solved. Chkdsk/r is a bad sector and now it does not work which is a great relief. Frustrating that you cannot, by normal methods, follow the path C... virtual machines given that there is no appdata folder. For other readers, I had disabled integration so that I could see the XP screen before I tried XP - I tried to activate the integration, but it wouldn't let me. When fully XPloaded asked me a password that I did not know that it is not only my login for Win 7 but an OEM supplied password. Fortunately, when I am logged into XP, Win 7 let me integrate XP again. If someone needs to know how please contact me.  JoselBarra has been a good help, thank you.

• After the recent update Windows Vista (Japanese OS) Firewall/Malware WARNING

  Hi, I am faced with a new type of problem since the recent update of Windows. In fact I've been using computer for a long time and on computer there's always Norton Internet security (previous Anti Virus) also, I had Malwarebyte s anti-malware installed and did not get the message "security WARNING Windows turn on the firewall and malware". When I tried to click OK, it won't because I'm already using Norton and Malwarebyte s.

  This message is very annoying, I want to turn it off, but I can't.

  Would you please let me know the steps how can I disable it?

  Thank you.

  

  Hi Ari,

  This could be a temporary problem, please run live on your Norton Internet Security Update, until you get the message "No updates available", and then restart the computer. If the problem persists, run Norton Reinstall tool by www.norton.com/nrnr to reinstall Norton Internet Security and let us know if this helps.

  Thank you

  Charlie

  Norton support