Blue screen and CORE-DATA-INPAGE-ERROR Message

Similar Questions

• Blue screen Vista Kernel data Inpage Error

  Apparently, I have some bad sectors or something on my HD.  By knowing the BSOD, is it possible to partition the wrong part of the HD, reformat a different partition and reinstall Vista to eliminate the problem?  I have enough room to do it, but want to know if it will work until I'm in the effort of all.

  Hello PJMaxw,

  If there is a bad sector on the disk, then it is likely that there are more.

  With the bluescreens seeming to be varied and random, I recommend you contact Dell for assistance with the material side of this.

  Let us know what they say.

  Best regards

  Matthew_Ha

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.

• System service exception and kernel data inpage error BSOD in Windows 8

  Hi all

  I'm excperiencing the Bsod every three minutes, or, on Windows 8, 64-bit.  I read the forum and saw that many people become similar problem, but I'm not sure that this is exactly the same as mine (I apologize in advance if this is, but to my inexperienced eyes, a little different aspect errors), so I thought I would like to ask for suggestions on how to solve this problem. My laptop is Acer, a little over a year and I mainly use it to go to the internet documents and write (I'm not games). The Bsod occurred in the past (but maybe once a month or more), but just for the last 4 days, it has been constant and I can't use my laptop at all (atm I use another computer).

  Regarding the error: the only thing that appears on the blue screen is kernel_data_inpage_error and other times, the error is system_service_exception.

  The problem is that I tried to view the event logs to see what the exact error, but I can't keep the laptop works long enough for me to write down (or screenshot) the details of the error. I managed to see a message that says something bad article on a drive, but I couldn't get more details.

  I would greatly appreciate all advice on this subject,

  With thanks in advance I can't wait to hear your thoughts,

  Pina

  PG

  Please run the Driver Verifier to find the underlying issue

  These accidents were related to the corruption of memory (probably caused by a driver).

  Please run these tests to check your memory and find which driver is causing the problem.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  
  

  Since then, it is more likely to be a pilot run everything first.

  1-Driver Verifier (for full instructions, see our wiki here)

  
  

  If the auditor does not have the issue we move to it.

  2-Memtest. (You can learn more about running memtest here)

  
  

  If you cannot start after you have enabled the auditor reboot in safe mode

  In Vista & victory (F8)

  When win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-Windows-8-the-easy-way/

  
  

  Co-written by JMH3143

  .

• Blue screen on startup without windows error message 8

  Hello

  My computer toshiba satellite, only 2 months, shows a blue screen with no error message when starting upwards. Windows 8. I searched google for an answer and everything that I can find is: 1) remove the battery. 2) press F8. (3) remove the battery, connect the power cable, press and hold the power button for 15 seconds. None of these fixes worked. After holding the power button for 15 seconds the word Toshiba appears, as it tries to start, but only stays on for about 2 seconds then goes to blue screen again.
  Very frustrated with windows 8! Have had problems with him from the first day! Help, please!
  Sandi

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:

  1. go to the folder % systemroot%\Minidump.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:

  http://www.WikiHow.com/use-SkyDrive

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove DMP files after use.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• I get blue screen on my computer, the error message unknown errors

  original title: BlueScreen

  WHAT CAN I DO FOR BLUE SCREEN?

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Windows 8 Kernel data Inpage error blue screen?

  I keep coming the blue screen and with an error message saying "Kernel data inpage error" and it's really annoying because its so common and when the error occurs, it just reboots my computer everything and removing all my unsaved work. It becomes really annoying that it happened 5 times yesterday before I got bored and did a reset. After the factory reset - I still continue to get the error message. How can I fix it?

  Hello

  Thanks for the reply.

  I suggest to start the computer in a clean boot situation and then try to uninstall the game.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to perform a clean boot for a problem in Windows 8, Windows 7, or Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: Please refer to the section: How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Let us know the status of the issue.

• Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

  Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

  < email published by host >

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Computer not starting and I get an error message

  After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.

  Hello

  Check the disk for malware:

  Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
  Integrable Hirem is another choice - more can be found using Google.

  Trinity Rescue Kit - download on top right of the page
  http://trinityhome.org/home/index.php?wpid=1&front_id=12

  CD of Hirem boot is another good choice
  http://www.hirensbootcd.NET/Download.html
  http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.html

  Scan a Windows PC for viruses from a Ubuntu Live CD
  http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/

  ===================================================================

  You can also save the data and re-install Windows 7. The hard drive can be set
  another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
  allows you to copy the data to removable media such as CD, DVD or other USB drives.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  ===================================================================

  For slightly more:

  BCCode: 7B 0x0000007B

  INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.

  Important information if you have received a STOP Code

  If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  The following actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  Cause

  Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.

  This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)

  Resolution

  This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.

  Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.

  Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.

  Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.

  Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.

  If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.

  In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.

  This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.

  If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.

  Warning   If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.

  If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.

  BCCode: 7B 0x0000007B<-- read="" this="">
  * 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-

  =================================================================

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk does not work.

  Download Windows 7 system recovery discs - charge now $9.75 for ISO
  images to make the discs.
  http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/

  How to create a Windows 7 - free system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Help..! I got the blue screen and other issues, do not know what to do...

  Signature of the problem:
  Problem event name: BlueScreen
  Please help me, I got the blue screen and this message today while I was trying to solve a problem with the backup of my pc...
  Don't know what to put here, if you need more make me know... Thank you

  The system version: 6.0.6002.2.2.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 8086
  BCP1: 00000000
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\Mini030513-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-59483-0.SysData.XML
  C:\Users\Andy\AppData\Local\Temp\WERF871.tmp.version.txt

  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Hello

  Thanks for posting the question in the Microsoft Community!

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly

  http://support.Microsoft.com/kb/958233

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Note: When you format a disk, all data that it would disappear.

  It would be useful for us to identify the problem, if you could upload the dump file.

  You can use the Sky-drive to download the dump file. See the link for the steps on how to download Sky-Drive.

  Download pictures and files:

  http://Windows.Microsoft.com/en-in/SkyDrive/add-photos-files-FAQ

  The location of the dump file is C:\Windows\Minidump\.

  If the problem persists, or in the future if you face problems of Windows let us know and we would be happy to help you.

• Kernel data Inpage Error... Memory dump... Please help me

  Hi my name is shoaib.

  I am facing a problem of blue screen approximately every 20-40 minutes. I run the memory test and you indicates no error. I check the RAM via the command "mdsched.exe" and she also don't say no found error. But when the blue screen appears it is said on the top of the page "kernel data Inpage Error".

  Please tell me what to do?

  Here is my file link "msinfo32".

  http://1drv.Ms/1Lu9SpH

  I have not found any "directory Minidump" in C:/windows. Please suggest me what to do. I really need your help. Thank you

  If you stopped crashing run a trace of windows performance when you encounter the problem

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• 0X0000007A (KERNEL DATA INPAGE ERROR)

  Hello, I got a screen blue error during the game or just overall being on my pc, but it seems to happen more when I have the game. The code is '0x0000007a (KERNEL DATA INPAGE ERROR)' I did 3 bugs so far.

  1. CHKDSK C: /F /R (http://goo.gl/cQCQj2)

  2 memory diagnostic tool (https://neosmart.net/wiki/0x0000007a-kernel-data-inpage-error/)

  3. fix (when I tried fix it says update applicable to your computer)

  

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

  

• Satellte M30: BSOD - KERNEL DATA INPAGE ERROR atapi.sys

  Hello

  I really hope, really, that someone can help me. I'm no computer Wizard, so if you can help please give me simple instructions. My problem is that often my satellite M30 freezes and blue page happens to give me a warning.

  Top of the page is KERNEL-DATA-INPAGE-ERROR, then goes on to say disable Options memory BIOS such as cache or shading, atapi.sys says below.

  So can someone please help.

  Thank you

  Hello

  Because you are not a computer expert ;) I'll try to write as simply.
  It looks more like a hardware problem as a problem of software!

  But to be 100% sure, you should recover the laptop with the Toshiba Recovery CD supplied.
  This CD will be programmed the laptop back to the factory setting and usually the laptop should work properly after the recovery of the new!

  If you the BSOD will appear again the chances are high that memory, HARD drives and the motherboard is malfunctioning.

  But because you are a beginner, I would not recommend trying to solve this problem yourself.
  In this case, you must contact the ASP in your country!

  Good luck

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR