Blue screen and crushed; Hard Drive 'HEALTH' this will cause?

Similar Questions

• HP Pavilion dv6-1277el blue screen and disk hard error 303

  Hello

  I have a HP Pavilion dv6-1277el with Windows 7 installed. For some time the laptop crashed several times with blue screens until one day windows no longer starts or is is stuck on the loading screen.

  I used an Ubuntu live CD to backup data to the HARD drive of the laptop on an external drive, but after that transfer a large amount of data that I received a warning ON impending drive failure due to reassign areas.

  Restarting the laptop I received the following message from the HP auto test:

  Hard drive 1 fast (303)
  Hard drive 1 full (305)

  The strange thing is that, after the first time that I had these messages, Windows rebooted to work without any problem and I've never had any blue screen again.

  What should I do? Anyway to change my HARD drive or her trust?

  Thank you

  Hello new solvayhütte.

  Probably, he continues to work because it detects a problem with the drive.  However, the reader may not be totally dead immediately.  So now is the time to get ALL the data that you want out of the disc before it goes bad.

  You have two options currently.  You can replace the drive hard yourself (it is not difficult) or contact HP for a repair.

  To replace the drive hard yourself, you can use your notebook PC Maintenance and Service Guide for instructions on disassembly of the laptop.  There are also specifications stating the hard drive inside your laptop.  Use this information to buy a new hard drive and compatiable.

  If you do not want to replace the drive yourself, you can contact HP and inquire about a repair.  If you are within the United States or the Canada you can call to the 1-800-474-6836.  However, if you are outside this area, you will need to go to the HP support site for the contact information for your region.

  I hope that this information has been useful.  Have a great day!

• Error on blue screen and missing or invalid or component file causing Windows crash.

  Original title: missing or invalid files or components.

  Missing or not valid file or item causing windows/internet to freeze and crash. A BSOD (blue screen) shows a second and the computer restarts back on the desktop with no other problems. This happens only when I open/close a video too fast or I use some (L100 - 30 Hercules) aircraft in FS9. All other devices work fine. I sent an error report to Microsoft tonight when this happened. It conrcerned 2 files in C:\ Docs & Setting\All Users\Application data\Microsoft\Search\Data\Applications\Projects\System Index\System... (couldn't do the rest, but we had to do with the XML extension..) I am using Windows XP Pro with Service pack 3 and all updates.

  Is there a simple solution for this? I don't want to reinstall XP if I don't have, as my drive my being corrupt. I'm not sure. I also used some older programs that I have used for years that run fine on XP but will not work in Windows 7 even with Virtual XP Mode installed.

  Hello Joel S

  I had already tried this and it was not a hardware failure. I ran chkdsk and the player revealed a good with no bad sectors. I also use Belarc COMPUTER management systems that manages the health of smart HDs (HDs most have this 'Intelligent' ability). The problem was some legacy software that I thought that I had taken when I did a removal of the program. He left 5 pieces of something that is called «online...» "I found it using Malwarebytes, and he was buried deep in the registry. The program was "Cliffs of Dover" a stream online to run the program. Once you have downloaded the game was the only way to use it online, which took 20-30 minutes to load and once loaded would break your system if you have tried to play. Shame, it's a beautiful CFS, but way to buggy.

  In any case, removed from the basket with Malwarebytes and every thing works fine. No more accidents.

  Derek

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I recently got this blue screen and I don't know what the problem is.

  * Original title: blue screen problem

  Hello, I recently got this blue screen and I don't know what the problem is.

  I use a # model Sony Vaio VGN - FW510F & my graphics card is ATI Mobility Radeon HD 4650.

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033

  The blue screen mentioned this error: 0x000000EA

  More information about the problem:
  BCCode: 100000ea
  BCP1: FFFFFA80041B8170
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\020615-46550-01.dmp
  C:\Users\Andy\AppData\Local\Temp\WER-92976-0.SysData.XML

  Read our privacy statement online:
  Privacy statement for Windows 7 - Microsoft Windows

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Abui91

  These were related to the 5 year old video player.  I remove the current driver and install the latest driver available.

• What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  What is blue screen and what to do and how to fix this with out taking back to factory setting and reinstalling Vista

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Select Start, do a right-click on computer select Properties, advanced, system settings startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Send a copy of your dumpfile as a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

• Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number.

  Regarding my PHOTOSHOP CS5.1: I upgraded my computer, copy all the content of the hard drive to the new, and although I have disabled the software, I can't turn it on again in the new hard drive. This is an original product with a serial number. How can I activate it?

  Hi Uri,

  Please click on the link below and contact the Adobe Support via chat.

  Contact the customer service

  Hope this will help you.

  Kind regards

  Hervé Khare

• I've got 4 Lightroom and my hard drive is too full with photos I have in lightroom. I want to move a lot to a USB key and remove them from lightroom. What are the steps to do this please?

  I've got 4 Lightroom and my hard drive is too full with photos I have in lightroom. I want to move a lot to a USB key and remove them from lightroom. What are the steps to do this please?

  I have some listed here videos that will help you with this

  Organization of Lightroom - Lightroom and Photoshop training

  Dave

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• No Vista and no hard drive!

  Hello

  I have a friend whose computer laptop is playing so I'm writing this in his name.

  He said he went to turn on his laptop and it was just a blue screen and no Vista would load up. He went on the config and it said there was no hard drive recognized. He has the drive for Vista and went to try to reinstall it, but then when he went to install, C: is not available to install it on.

  Someone at - it ideas? I checked some other forums and they suggested to load in SafeMode etc but it cannot even get there! If you need more information, I will ask, but there may be a delay.

  Thanks in advance :)

  It is possible that the hard drive or a part of the motherboard of the laptop is damaged. If you feel it, you can check in the BIOS if the disk hard/SATA controller is enabled and works in AHCI mode or inheritance (PATA). You can also remove the drive from the laptop and reinsert again. Don't forget not to power the laptop down first, remove the AC adapter Plug and battery.

  If you do not feel like to do all this contact technical support from the manufacturer of the laptop.

• HP Pavilion g6 1014sa problems starting and complete hard drive (305)

  Hello

  Out of the blue, my laptop just stopped starting sometimes.  It didn't fall or anything.  The screen remains black after start-up and only the fan turns on.  Verified the external monitors etc.

  He occasionally start and I have usually press f10 for that to happen.  I ran the diagnostic tests and memory, we came back ok.

  Disd hark test rises "hard disk complete 1 (305).

  However when I leave configured BIOS, windows starts normally and works ok for a few days.  So is there really a problem with the hard drive?  This would explain why it won't turn?

  The laptop becomes quite hot enough quickly also, this can be explained by the error of hard disk or is it do? I don't want to buy a new drive hard to make it happen.  Is it POSSIBLE to repair a hard drive or replacement is the only option? This error is certainly correct?

  Thank you

  Michael

  Hello miklc:
  I'm here, but I don't know what is your solution. frrw I get a solution resolved says the error message (disk hard 1The (305) means your drive hard fails to replace the hard drive.) http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/G61-110SA-hard-disk-1-full-305/TD-p/1932921 Same error but on another HP computer. That's all. You're welcome frrw. There is a solution easy to. just get your HDD on HP parts store tour, directions to replace is on the page to update your computer under the section. Very simple task. Now, it's the right time to back up your computer while you still have a chance to while waiting for your new hardrive. You're welcome frrw.

• Beginning of blue screen and Windows don't

  Recently, I upgraded my market after computer. (While the computer has already had spare parts which are or were already due to a malfunction. If you want I can provide you with a list.) After talking with Microsoft asked if they were able to replace my product key, because the windows that already before my material change was working. (And the HARD drive works, just Windows that is not.) They refused. I went into BIOS and messed with everything that I know everything.  I ran each dignaostic I don't know how too (which say the disk is fine.) I tried two other HARD drives that start windows (one of that copy of Windows 7 is not work beause after resetting it say it is not authentic and won't let me not use anyway.) The other is my brother and work perfectly. I tried a system img (yes I have.), and I tried a disc of Windows reapair. I tried many solutions on this page and on the page of Microsoft Support. If anyone has a solution, or could possibly help me before my next paycheck (which isn't it intill next week.) I would appreciate.

  If you want more details just ask below, and they will receive in due course.

  Hello Cybereus,

  I would like to know some information about the problem so that we can help you better.

  1. you receive an error message or a code when you say, "blue screen"? If Yes, what is the error message?
  2. What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to problem starting Windows. I will definitely help you.

  This problem may occur because of damaged or missing Windows startup files.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Use Bootrec.exe in the WINRE to resolve startup problems
  https://support.Microsoft.com/en-us/KB/927392

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Satellite 3000-214: after CPU upgrade no screen and no HARD disk activity

  Hey all,.
  I have a 3000-214 Satellite that comes originally with a PIII-M 933 Mhz. (SL5CG)
  http://videoff7.free.fr/sl5cg.jpg

  I ordered on eBay a second hand replacement (1133 Mhz) CPU SL5CK. (same number of pins, the same processor family: RH80530)
  When I go in, the laptop starts, but there is nothing on the screen and no HARD disk activity.

  So I asked the seller if he had tested the CPU, it sent, he said no and sent me 2 CPUs of replacement, another SL5CG and a SL64Z (which does not appear on the Intel site for some strange reason, but which is of the same characteristics as the SL5CG..)
  http://videoff7.free.fr/sl5ck.jpg
  http://videoff7.free.fr/sl64z.jpg

  The two processors give the same result with nothing on the screen and no activity of the HARD drive either.
  I checked my BIOS, it is the latest version: 2.30.
  Some laptops in the series 3000 Satellite (e.g. 3000-601), are delivered with a 1133 Mhz CPU (SL5CK) and also share the same bios exactly like my 3000-214. (upgrades to the bios on Toshiba website for my 214 & 601 are the same exact links and MD5 are equal). Also the 3000-601 & 3000-214 share the same chipset: Intel 830MP.
  But for some reason, it does not.

  EC which could I missed?

  It is always possible that all 3 processors that I was sent by the seller are dead, but it would be strange at this point, I think.
  So my question is, anyone have any idea what I might try to work or have experience with the upgrade a Satellite 3000 CPU?

  My warranty is looooong Sub anyway, so if a Toshiba employee could check in the basis of how fast max CPU can be used on the Sat 3000-214, I would be very grateful.

  Thanks a bunch for any info.
  Kind regards

  Alcahest

  Hello

  I studied a bit in the web and it seems that the Satellite 3000 has been bundled with Intel Mobile PIII 800, 850, 900, 1000 MhZ CPU

  I think that this will not work because of the speed of the CPU.
  In addition, I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/FAQ5300W5000XR01.htm

  It is said that it is not possible to replace the processor in a laptop Tosh because processors are connected to the motherboard using a process called TCP tape carrier package.