blue screen and error stop 0x00000007b

error message appeared 0x00000007b?


0x7B bug check code: (v = VS. 85) .aspx

What is your computer brand and model?

What country do you live?

Try the last good known Configuration:

You have a Windows XP disk, or you are dependent on a backup copy of Windows XP on your hard drive?

Tags: Windows

Similar Questions

  • My laptop seems to restart blue screen, and then stop automatically... once again.

    My dell inspiron N4010 intel core i5 inside, Ram 2 GB, ATI mobility Radeon HD 4570, appears blue screen and reboot... then reported any problem as follows. I am running Window 7 32 bit recently installed service Pack 1 (this is perhaps a cause? but I experienced blue screen before that). What could I note, it always happened all of a sudden if I click on a video newly downloaded (with IDM) from any site (youtube, daily motion?). Maybe a virus...? but I use active. Kaspersky antivirus 2011. I encountered this problem so many times (more than 6 times of crshes) I'm totally out of it... What I would do!

    Please help me if you can!

    Windows has recovered from an unexpected shutdown.

    Windows can check online for a solution to the problem...

    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.
    Locale ID: 1033

    More information about the problem:
    BCCode: 1000008e
    BCP1: C0000005
    BCP2: 00000000
    BCP3: C6BD4E44
    BCP4: 00000000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Users\Instinct Wn\AppData\Local\Temp\WER-46753-0.sysdata.xml

    Read our privacy statement online:

    If the online privacy statement is not available, please read our offline privacy statement:

    Before I had installed Windows 7 service pack 1 , error as follows.

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.1.7600.
    Locale ID: 1033

    More information about the problem:
    BCCode: 131
    BCP1: 00000002
    BCP2: 00000032
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_1_7600
    Service Pack: 0_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Users\Instinct Wn\AppData\Local\Temp\WER-53757-0.sysdata.xml

    Read our privacy statement online:

    If the online privacy statement is not available, please read our offline privacy statement:


    your old ATI Catalyst driver is the cause of the crash:

    KERNEL_MODE_EXCEPTION_NOT_HANDLED_M(1000008E), {c0000005 error checking

    Probably caused by: atipmdag.sys

    Image path: \SystemRoot\system32\DRIVERS\atipmdag.sys
    Image name: atipmdag.sys
    Timestamp: Thu Jan 22 14:44:57 2010

    Update to the latest version of the ATI Catalyst driver.

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP -

  • Blue screen and error code: 0x0000008E (0xC0000005, 0x8243BA8D, 0xE3452BB4, 0x00000000) _

    I get the above error message and bluescreen when the computer is just sitting idle does nothing.  Usually, it's when the internet is open, but not surf.  Can someone help me understand this.  The graphics card is an Intel 82945 G express shipset family and I checked to see if it is up-to-date and the pilot said he is up to date.

    Any help?


    Have you checked Site system manufacturer (manufacturer of custom systems motherboard), then
    Intel downloads?

    After checking the system manufacturer's Site

    Intel - Downloads - graphical value and then the other parameters as needed.


    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files


    Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
    Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
    other pilots to check there. Disable the installation of self as those who are older and if
    Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

    See methods of update driver generic in the next message.

    BCCode: 8th 0x0000008E is the same as 0x1000008E


    Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

    If you do not know the specific cause of the exception, consider the following:

    • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
    • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

    If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

    You can solve the problems of BIOS by upgrading the version of the system BIOS

    BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
    * 1151.html? order = date


    Look in the Event Viewer to see if something is reported on those.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.



    Also this, so you can see the probable bluescreens. (If necessary)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.


    It comes to my convenience store generic bluescreen:

    Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
    This would help. Such as ITC and 4 others entered at the bottom left. And another error
    information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore


    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista


    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.

    How to install a device driver in Vista Device Manager

    How to disable automatic driver Installation in Windows Vista - drivers (WS.10) .aspx


    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly

    Troubleshooting, STOP error blue screen Vista

    Understanding and decoding BSOD (blue screen of death) Messages

    Windows - troubleshooting blue screen errors


    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair

    This tells you how to access the System Recovery Options and/or a Vista DVD

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Blue screen and error checking of system IO

    I had problems with an external hard drive (USB plug & play) is not recognized. It has been suggested that I have run verifier.exe, I did. Now when I turn on the laptop, it takes forever to start up and then goes to blue screen that reads:

    E/s SYSTEM ERROR CHECKING in wmiacpi.sys (of ERROR DRIVER 20th WDM) [wmiacpi.sys + 152f to BA13A52F]

    This does mean that I have to remove this driver and if so, how do I do that? I am running Windows XP.

    You can try to remove this driver in Safe Mode:

    When your computer is turned on, press and hold your power button, off computer unitl.

    Press the power button again and you will be prompted with several options.

    Select safe mode

    Wait for all the base drivers to load.

    Once you are in Mode safe, click Start, right-click my computerand then click Properties.

    It should open a window with several tabs, press the Hardware tab, and then press Device Manager.

    Locate your device, then right click and click on uninstall driver.

    Restart your computer.

    Windows should automatically attempt to install a driver for your hardware on the startup.

  • When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

    When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

    I can only log in safe mode of network.

    original title: blue screen error

    If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

    "How to solve configuration errors by using the System Configuration utility in Windows XP"
      <> >

    "System Configuration Utility overview"


  • Cannot change anything in the action center error code and the blue screen and stops.

    I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

    OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

    Hey Chrisb,

    You did changes to the computer before the show?

    Step 1: I suggest to start the computer in safe mode and check if the problem persists.

    Start your computer in safe mode

    Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
  • Error on blue screen and SP3.

    Kept restarting my computer.

    Which was fixed by removing this option.

    Now, I get a blue error screen and error details show that the problem is with SP3.

    I have not SP3 as soon as possible, but Microsoft Essentials would not start until I downloaded the SP3.

    What should I do?

    As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

    Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Here are a few general BSOD issue and instructions if you want to understand our your BSOD and fix it.  If your system does not at all, do the best that you can...

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    What is your Internet browser and version?

    Your system's disks IDE or SATA drives?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    The afflicted system has a working CD/DVD (internal or external) drive?

    You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

    Do you see that you think not you should see and when you see it?

    What do not you think that you should see?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Your system seems to start OK and then crash or didn't he start not at all?
    Can you make the system crash when you want?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).

    The next time your system crashes, provide more information on what you see.

    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
    Now provide more information about your system and data against more recent accidents.
    Click Start, run and enter in the box:
    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
    This will minimize back Q & A and eliminate guesswork.
    Download BlueScreenView here:
    Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
    If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
    BlueScreenView tries to find the right driver or module that caused the blue screen by looking inside the stack of the accident. However, be aware that the driver detection mechanism is not 100% reliable, and you should also look in the lower pane, that display all drivers/modules found in the stack.

    Sometimes BlueScreenView will involve XP files as being the cause of the accident (ntoskrl.exe, win32k.sys, hal.dll etc.) but they are probably not the real cause of the accident (BSV is doing the best he can).

    You will need to either pick up some example crashes over and look through them, or find somewhere the XP files are not the 'cause' or you can upload your files to your SkyDrive crash dump and someone with the windows debugging tools can help take a look at them more closely.

    Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
    Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.

    Open BSOD.txt with a text editor Notepad, WordPad, etc.), select all (Ctrl-A), copy all the text in the Windows Clipboard (Ctrl-C) and paste the text to the Clipboard (Ctrl-V) back here in your next reply.

    Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

    Dump file: Mini102911 - 02.dmp
    Crash time: 2011-10-29 04:54:36
    Bug check code: 0x000000e2
    Parameter 1: 0x00000000
    Parameter 2: 0x00000000
    Parameter 3: 0x00000000
    Parameter 4: 0x00000000
    Caused by the driver: i8042prt.sys
    Caused by the address: i8042prt.sys + 27fb
    Description of the file: i8042 Port driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 5.1.2600.5512 (xpsp.080413 - 2108)
    Processor: 32-bit
    Plant address: ntoskrnl.exe + 22f43
    Stack address 1: i8042prt.sys + 27fb
    Stack address 2: i8042prt.sys + 2033
    Battery 3 address: ntoskrnl.exe + 6e715
    Computer name:
    Full path: C:\WINDOWS\Minidump\Mini102911-02.dmp
    Number of processors: 4
    Main version: 15
    Minor Version: 2600
    Size of the dump file: 94 208

    Send information BleuScreenView of 5 last memory dumps (if you have 5 dumps memory yet, send the most recent, you).
    While you wait, please follow these steps:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA):
    SUPERAntiSpyware: (SAS):
    They can be uninstalled later if you wish.

    Restart your computer and solve the outstanding issues.

    It is sometimes easier just to download the memory dump files since your last breaks down on your SkyDrive (everyone has a SkyDrive for file sharing).   So can someone who already has Windows debugging tools to look at things and understand what is happening.

    Dump memory of recent crashes and BSOD files are usually in this folder:


    The files will be named something like this:

    Mini123011 - 01.dmp

    You need to download the latest... maybe 5-10 of the most recent crash dump files should be sufficient if you who have a lot.  If you do not have that much, send what you have.

    Getting started with SkyDrive:

    Once you get your downloaded files and watch them on your SkyDrive, you need to 'share' your folders/files so that others can see them.

    Here is a link that tells you how to:

    Then click on the button "insert a link".  When you click on that, a window opens that contains the link to your SkyDrive files.

    Copy the contents of the box "copy this link to share:" in selecting the content of the link (it will be all highlighted), press Ctrl + C (copy) and then come back to the forum and in your next message, press Ctrl + V to paste the contents of the link back here.

    What you paste the return will look something like this link on my SkyDrive:! 311

  • Blue screen driver error less than stop: 0x000000D1

    Hi everyone-

    I get the following error message when you access the Internet (such as randomnly)

    Blue screen driver error less than stop: 0x000000D1 (0 x 00000778, 0xF93D8F0F, 0x00000002, 0x00000001) NDIS.sys - address F93D8F0F base at F93C0000, datestamp 41107ec

    I have frankly not much idea on why this would happened because I don't use a lot of this computer. I actually erase me just my files and photos and to transfer to a USB port so I could donate to this computer. Anyone has any advice they can share? (I did an error checking and it did not work)

    Computer details:

    IBM Think Pad R50 series (R51)

    Windows XP


    1. have you made changes on the computer recently?

    Follow the steps listed in the articles below and check.
    Stop error message on a Windows XP-based computer: "STOP 0x000000D1".

    You receive an error message "STOP 0x000000D1" on a laptop computer Windows XP Service Pack 2

    I hope this helps.

  • Computer stops with a blue screen with error fatal when the iPhone is connected

    I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

    First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

    My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

    I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

    Thank you.

    Hi 1980ckc,

    1. have you tried to connect the iPhone to a different USB port?

    You can check out the apple support link and check if it hleps:

    iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

    Also check out the apple discussion link:

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • whenever I try to install the new software on my computer goes to a blue screen and stop making

    Original title: HELP!

    whenever I try to install the new software on my computer goes to a blue screen and stop making


    It takes a lot more information

    What operating system


    read this

    How to ask a question

    -What you trying to do?
    -Why are you trying to do?
    -Do you try already, why and what was the outcome of your actions?
    -What was the exact error message you received?
    -How long have you been experiencing this problem?
    -Have you searched the relevant forum/newsgroup archives?
    -Have you tried all the tools or KB articles or other resources?
    -Have you recently installed or uninstalled any hardware or software?
    -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

  • Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.


    I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

    I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

    I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
    What I do, he turns to blue screen with the same information.
    Tried to reinstall from the CD of restoration without success.

    Help would be massively appreciated.


    > Tried to reinstall from the recovery without success CD.
    In this case, it seems hardware problem.
    BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

    But this could be one of the possible malfunctions

  • Blue screen and CORE-DATA-INPAGE-ERROR Message

    The blue screen and the CORE-DATA-INPAGE-ERROR Message appeared during extract some files, 2 consecuentlly. It has happened too, but not that often and during other processes. What should I do? The OS is Vista Home Premium.

    Indeed, I am here!

    Thank you for fixing links.

    The attached file of the DMP is to bug checking KMODE_EXCEPTION_NOT_HANDLED (1e) .

    This indicates that a kernel-mode program generated an exception which did not catch the error handler.

    8th error checking, {c0000005, 9eaa4efc, e551bae0, 0}

    0: kd > 9eaa4efc ln
    (9eaa4eb2) win32k! PFEOBJ::vFreepfdg + 0x4a |  (9eaa4f65) win32k! MultiUserGreTrackRemoveEngResource

    The exception is produced in win32k! PFEOBJ::vFreepfdg + 0x4a.

    0: kd > k
    ChildEBP RetAddr
    e551b6a0 84071908 nt! KeBugCheckEx + 0x1e
    e551ba70 8409584 has nt! KiDispatchException + 0x1a9
    e551bad8 840957fe nt! CommonDispatchException + 0x4a
    e551bafc 8401e70c nt! KiExceptionExit + 0 x 186
    e551bb64 9eb38a95 hal! KfLowerIrql + 0 x 64
    e551bb84 9eafac21 win32k! RFONTOBJ::vDeleteRFONT + 0 x 130
    e551bbbc 9eafada2 win32k! vRestartKillRFONTList + 0x7b
    e551bbf0 9eaafcd7 win32k! PFTOBJ::bUnloadWorkhorse + 0 x 115
    e551bc1c 9eaaf8d9 win32k! vCleanupPrivateFonts + 0x4d
    e551bc34 9eaac06e win32k! NtGdiCloseProcess + 0x16c
    e551bc54 9eaabbad win32k! GdiProcessCallout + 0 x 145
    e551bc70 84262 has 48 win32k! W32pProcessCallout + 0x5d
    e551bcdc 8423f47f nt! PspExitThread + 0x4a0
    e551bcf4 840fde8e nt! PsExitSpecialApc + 0 x 22
    e551bd4c 84094d 42 nt! KiDeliverApc + 0x1dc
    e551bd4c 77a95d14 nt! KiServiceExit + 0 x 56
    WARNING: Frame IP not in any known module. Sequence of images may be wrong.
    04adf6dc 0x77a95d14 00000000

    Associated police crashes, likely a buffer overrun.


    1. remove the font cache and then restart > C:\Windows\System32\FNTCACHE. DAT

    * I recommend that you create a system restore point before that just to be sure: Vista - START | type rstrui - create a restore point.

    2 you have avast! + Security installed Aladdin, is at the origin of the conflict.

    Remove and replace avast! and Aladdin with temporary Microsoft Security Essentials for troubleshooting purposes:

    avast! removal -

    MSE - 

    3 uninstall Smart Defrag as soon as possible.

    4 uninstall RealNetworks as soon as POSSIBLE, the drivers are too old - 2003.

    Kind regards


  • blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

    blue screen code error 0x0000007e

    Or more articles in this search:

    Hope one of these AIDS. QQ learn manage!

  • Satellite L755 - 16L gives the blue screen and physical memory dump

    Please advice

    I bought my L755 - 16L in the month of August.
    Until last week it went very well.

    Last week I'm going to visit another country he only has the 240V voltage.
    Normally at home, I use 100V power supply for my laptop.
    After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

    Usually, I unplug the charger after the judgment.
    The next day if I start the computer, the computer gives the blue screen and physical memory dump.
    If not unplug the charger after stop down and don't use the next day then no problem.
    Please advice what can I do to stop this problem.

    This is the report of errors in Event Viewer.

    "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.


    [Name] Microsoft-Windows-Kernel-Power
    [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

    Event ID 41

    Version 2

    Level 1

    Task 63

    Opcode 0

    Keywords 0 x 8000000000000002


    [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

    EventRecordID 48763



    [ProcessID] 4
    [ThreadID] 8

    Channel system

    Computer toshiba-TOSH


    [User name] S-1-5-18


    BugcheckCode 30
    BugcheckParameter1 0xffffffffc0000005
    BugcheckParameter2 0xfffff80003717ce5
    BugcheckParameter3 0x0
    BugcheckParameter4 0xffffffffffffffff
    Fake SleepInProgress
    PowerButtonTimestamp 0


    In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
    Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

    I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

    BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:


    Right-click my computerand then click Properties.


    Click the Advanced tab.


    Under Startup and recovery, click settings to open the Startup and recovery dialog box.


    Clear the automatically restart check box, and then click OK many times necessary.


    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for