Blue screen and unable to boot

Similar Questions

• CQ40-310AU problem: will blue screen and wont even Boot from the BIOS

  I got a CQ40-310AU in September 2009 and installed windows 7 ultimate on it. I got a blue screen while playing music in media player, but all of a sudden he went to BLUE SCREEN (with streaks of blue pixelation). I RESTART the laptop, REMOVED the battery and tried to disable it again, but it will not switch to POST; now the LIGHTS Flash. I followed the steps in the section support and drivers HP troubleshooting steps:

  LED white screen error codes:

  http://support.HP.com/us-en/document/c01443366

  Result: Problem still persisted

  I also tried to follow the steps:

  'IRQL NOT LESS OR EQUAL' serious error message appears during startup:

  If you have 2 sticks of memory, remove one and try again, if no chance to remove one module and try the one you deleted.

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• System will not start completely, blue screens and then restart

  Well, I need serious help. I have Windows 7 and installed Ubuntu on my XPS M1730. Yesterday my laptop shuts off and when I went to put it back on it would start start and then blue screened and restarted, continuing the cycle. I tried to use the system restore (Gets an error). I also tried to reformat using the Windows Vista disk that came with my laptop. It does not start, it just goes to the screen where I can choose between Windows 7 and Ubuntu. My friend is here and I'm on this laptop, and we wanted to play our game together. So please help quickly (if it is a command line or other) then we can game. Thank you :D

  To boot from a DVD, positioned on the BootOrder:

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot put computer to sleep without blue screen and crashed

  Hi guys, in the 3 months that my PC has been having this strange problem where seemingly randomly it selects to the blue screen and crashed. A few times, it was when I was not even at the computer, and no programs were running. Most of the time there will be a few moments after that, I chose the option to sleep, but also took place after I choose restart.

  My specs: Windows Home Premium 64-bit

  Intel core i3-4130 3.4 GHz

  8192 MB RAM

  2 AMD Radeon Crossfire 7790

  I thought I should also mention that I use a TV 48 "as a monitor screen.

  This is what usually happens after that my PC is recovering from the accident

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode: 1000007e

  BCP1: FFFFFFFFC0000005

  BCP2: FFFFF8800F1256B5

  BCP3: FFFFF8800BD51308

  BCP4: FFFFF8800BD50B60

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\042315-6193-01.dmp

  C:\Users\Corey\AppData\Local\Temp\WER-28563-0.SysData.XML

  I really appreciate any help I could get with this. Thank you!

  It seems that you have an unstable BETA AMD driver installed.

  Value of the element
  Name AMD Radeon HD 7700 Series
  ID of device PNP PCI\VEN_1002 & DEV_665C & SUBSYS_E253174B & REV_00\4 & 2F87A1B6 & 0 & 00E4
  Adapter Type processor AMD Radeon Graphics (0x665C), compatible with Advanced Micro Devices, Inc.
  Adapter Description AMD Radeon HD 7700 Series
  Adapter RAM 1.00 GB (1 073 741 824 bytes)
  Installed drivers aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
  14.501.1003.0 driver version

  http://support.AMD.com/en-us/download/desktop?OS=Windows%207%20-%2064

  Crash details.

  The debugging session: 16:32:23.495 Thu May 7, 2015 (UTC - 04:00)

  Loading user symbols
  Loading unloaded module list
  .......
  Cannot load the image \SystemRoot\system32\DRIVERS\atikmdag.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for atikmdag.sys
  ERROR: Module load completed but symbols can be loaded for atikmdag.sys

  06/05/2015 15:49 Windows Error Reporting bucket Fault X64_0x7E_atikmdag! OsServices::pOsServices + 5, type 0
  Event name: BlueScreen
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:

  Attached files:
  C:\Windows\Minidump\050615-6411-01.dmp
  C:\Users\Corey\AppData\Local\Temp\WER-15350-0.SysData.XML
  C:\Users\Corey\AppData\Local\Temp\WER869.tmp.WERInternalMetadata.XML

  & #x000a

  Please go back to a previous version of the driver, linked below.

  Display Driver version 14.301.1001
  Driver OpenCL (tm)
  Catalyst Control Center
  HydraVision

  http://support.AMD.com/en-us/download/desktop/previous/detail?OS=Windows%207%20-%2064&Rev=14.9

• HP computer shows a blue screen and restarts.

  * Original title: Puzzle blue screen

  I tried to help a friend trouble shoot a problem. Its a HP computer, displays a blue screen and restarts. We are unable to read the message. I went through the newspaper and cannot determine the cause error. I have several possible solutions thanks to this forum, but I'd like to have someone looking at the landfill to see if I'm on the right track. It seems to me that it could be a power supply problem.

  Here is the link on Onedrive for minidump files that I found.

  Thank you.

  WPD50

  No puzzle here.  Symantec is killing netio.sys.  It should be removed and replaced by MSE

  Symantec is a common cause of BSOD.

  
  

  I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN

  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Satellite A200 - blue screen and reboots the system

  Hello!
  I have TOSHIBA Satellite A200-1IZ 8 months
  Since yesterday, when I close the FN at the bottom is blue screen and the system is restarted.

  How can I solve this?

  are you sure its done the FN key? It may be a RAM issue

• iPhone 5 shows blue screen and restarts automatically

  iPhone 5 shows blue screen and restarts automatically

  1. try to do a reset by pressing home and off/power button together until you see the Apple logo, then release

  2. If you can't do it you may need to restore the phone via iTunes

  (1079)

• 11.0 Adobe goes to blue screen and is now a flicker of the screen

  When I run adobe 11.0 that is loaded on the terminal, that he goes to the blue screen and now my screen flashes.   What should I do?

  Hi Bob,

  Thanks for posting in the Microsoft Community Forums.

  It would be more useful, me if you answer these questions.

  1 Windows operating system you are using?

  2. are you blue screen only with the Adobe program?

  I want the season to follow the article provided to solve the problem.

  Resolve system errors, freezes | Windows | Adobe software

  http://helpx.Adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-Windows.html

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft