Blue screen at the start of WinSrv2008r2 recovered from the backup of windows virtual machine image

Hello

At first, everything seems fine:

-to create the new virtual machine

-startup disc for instalation of Windows Server 2008 on this VM

-Select "Repair system" and point the backup image file (full backup - made with standard Windows backup tool)

-system recovered successfully.

But then, when the system restart recovered fresh - start start Windows normally - and suddenly it is blue screen with the error 0x0000007b

IMHO, this first initiated boot of the recovered system trying to twist something in the special part of the disc and he cannot (because it's a virtual disk?)

Is it possible to recover the system windows image file system server to virtual classic?

Thanks in advance for all voice :-)

Greetings,

RA

Welcome to the community,

the error message is related to the controller to start the virtual machine, which is different from the original system, and its drivers are not loaded in Windows. What you try, it is to use the free VMware Converter and run the option "Set up the Machine", which should inject the necessary drivers in the virtual machine. Before doing this, please make sure that the Windows 2008 virtual machine has the default "LSI Logic SAS' controller configured in its settings.

André

Tags: VMware

Similar Questions

  • Blue screen at the end of Windows Update

    I have Windows updates the value allowing a manual download and install.  Today, when the icon appeared, there were 8 suggested files.  I downloaded and the window open during the installation Setup.  Approximately 98% of the 8th and last update (Malicious Software Removal Tool if they are installed in the order), I got a blue screen.  The machine starts, but the Update icon reappeared, asking to perform the same 8 updates.  I know that most of them have already been installed.  I really hesitate to install again, especially as others have reported may not even start at all their machines after this batch of updates.  What should I do?

    Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

    The following actions could prevent a mistake like this does not happen:

    1 download and install updates for your computer from device drivers [of the manufacturer of the device or computer software download page, not Windows Update!]
    2. scan your computer from computer viruses.
    3. check your hard disk for errors.

    Source & more: http://msdn.microsoft.com/en-us/library/ff559023(v=vs.85).aspx

  • Blue screen during the installation of windows

    I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

    Hi AhmadDimassi,

    ·         What is the error it fails with?

    Check to see if the following is useful.

    Method 1: Unplug non-essential devices from the computer and restart the computer.

    Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

    a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

    b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

    Method 3: Check drive for errors.

    Description of the Windows XP Recovery Console for advanced users

    Microsoft Windows XP - Chkdsk

  • PCI.sys blue screen during the installation/repair Windows XP Pro

    My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

    Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

    Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

  • Blue screen during the installation of windows XP pre installed Windows 7

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • I have pre installed Windows 7 on my sony vaio CW series (i5 processor). I am trying to install Windows XP on the same machine. I followed the steps. 1. Select Boot option internal optical drive. 2. Insert Windows XP Home Edition OEM CD ROM. CD 3. Received the Message "Press Any to Start installation..." 4. once the installation program continues until the message "Windows starts the installation program" and the boom blue screen.
    • Error messages
    • Recent changes to your computer
    • I tried with two different OEM CD, but didn't work

    How is your question about the Windows Update feature?

    Try this forum instead: http://social.answers.microsoft.com/Forums/en-US/xpinstall/threads

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Gateway Windows 7: stop blue screen during the installation of Windows 7: 0 x 00000024

    OK, I've had so many problems with this computer and I would love to have the support of the community.
    I have a Gateway desktop that is labeled for Windows vista. I had already installed Windows but a virus brought me to uninstall. I don't have the disc, but I have a flash drive with windows 7 on it. So I have my computer to run the player flash start run the windows setup program. I get to the part after the selection of my hard drive. It comes down to 50-60% full, and then it stops at a blue screen with stop code error 0 x 00000024 (0x0000000000190FB 0XFFFFF88003B8C269 0XFFFFF88003BAC0 0XFFFFF8000D292FOD) I have searched and searched for a solution but none to my knowledge, I am only 16 and very bad so I can not affored a new computer, or a repair of $75. Please when replying to this is so simple and stright forward. Thanks a lot for taking time outta your day to help me.

    Pearen

    These were related to the Extensible Atheros athr.sys wireless device driver. I would re - install newer and updated the drivers listed below and updated to update to Service Pack 1

    Older drivers who need to update your driver of athr.sys which is 3 years old inclusive
    SCDEmu.SYS Mon Jul 7 03:40:49 2008 (4871-881)
    PowerISO Virtual Drive driver
    http://www.carrona.org/drivers/driver.php?id=SCDEmu.sys
     
    VSTCNXT3. SYS Wed 15 Oct 20:29:13 2008 (48F68AD9)
    Conexant SoftK56 Modem driver
    http://www.carrona.org/drivers/driver.php?id=VSTCNXT3.sys
     
    VSTAZL3. SYS Wed 15 Oct 20:30:03 2008 (48F68B0B)
    Conexant SoftK56 modem
    http://www.carrona.org/drivers/driver.php?id=VSTAZL3.sys
     
    VSTDPV3. SYS Wed 15 Oct 20:32:04 2008 (48F68B84)
    Conexant SoftK56 Modem driver
    http://www.carrona.org/drivers/driver.php?id=VSTDPV3.sys
     
    Rt86win7.sys Thu Feb 26 04:04:22 2009 (49A65B16)
    Realtek NETWORK card
    http://www.carrona.org/drivers/driver.php?id=Rt86win7.sys
     
    amdxata.sys Tue May 19 13:57:35 2009 (4A12F30F)
    AMD - usually from the Windows 7 DVD storage controller driver
    http://www.carrona.org/drivers/driver.php?id=amdxata.sys
     
    ATHR.sys kills Jun 9 14:04:52 2009 (4A2EA444)
    Atheros Extensible Wireless LAN driver for network card CB42/CB43/MB42/MB43-D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev.) (B) discontinued 2008
    http://www.carrona.org/drivers/driver.php?id=ATHR.sys

    Run (SURT) system update readiness tool and then update to Service Pack 1

    32 bit
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=3132
    64 bit
    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=20858

    Now updated for Service Pack 1


    http://Windows.Microsoft.com/installwindows7sp1

    Learn how to install Windows 7 Service Pack 1 (SP1) http://windows.microsoft.com/en-US/windows7/learn-how-to-install-windows-7-service-pack-1-sp1

    Additional resources:

    http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
    http://Windows.Microsoft.com/troubleshootwindows7sp1

    BugCheck D1, {30, 2, 0, 902658a 5}
    Probably caused by: athr.sys (athr + 428a 5)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck D1, {30, 2, 0, 918618a 5}
    Probably caused by: athr.sys (athr + 428a 5)
    ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
    BugCheck D1, {30, 2, 0, 94c448a5}
    Probably caused by: athr.sys (athr + 428a 5)

  • Blue screen during the installation of Windows XP on Satellite L505-10J

    I intend to install windows xp on my computer toshiba laptop.
    All the time, it shows me an error message (blue screen).

    Anyone know the problem and can help me more?

    Greetz

    Hello

    This happens because of the missing SATA driver.
    You have two options;
    You must include the SATA driver in Win XP using software like nLite or you would replace compatible SATA to AHCI mode in the BIOS.

    You can access the BIOS by pressing F2 while turning on the laptop.

    Welcome them

  • Blue screen during the installation of windows 7

    Hi guys, this is my first question. I have a problem during the installation of windows. A blue screen saying is displayed "STOP: c000021a {fatal system error}.

    The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 xC0000001 0x001003f0).

    The system stopped"I can't do anything else than the computer shutdown. Please help me

    Could you provide your system specifications?

    Are the upgrade from a previous version of Windows or to do a clean installation?

    This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

    Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

    If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

    If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

  • Unalterable RCLI in U4, how do the backup for my virtual machine

    Hi, in the update of this week, my esxi U4 servers build 153875, but now have a problem, my script php to backup virtual machines do not work, orders rcli is unable to connect to the esxi Server

    Search error:

    root@backuplinux script# /usr/lib/vmware-viperl/apps/vm/vminfo.pl--serveur virtual7

    Enter the user name: root

    Enter the password:

    Error to connect to the server " " https://virtual7/sdk/webService': Maybe host isn't a Virtual Center or ESX Server.

    I use:

    VI Perl Toolkit version: 1.6

    'Vminfo.pl' script version: 1.0

    You can take a look at ghettoVCB that use the console SSH not supported for download and execution of the backup script. You can also take a look at Veeam Backup If you are looking for a basic GUI solution, among others.

    =========================================================================

    William Lam

    VMware vExpert 2009

    Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

    http://Twitter.com/lamw

  • X 200 with ssd OCZ blue screens at the start of the docking station

    The 200 x blue screens when the startup of the docking station. If I take the laptop to the docking station to start and then once booted dock the laptop is fine.

    The issue started happening when you I upgraded the laptop form a SSD OCZ vertex 2 drive from xp to windows 7 and installed.

    I tried to update the firmware on the ssd using this utility

    http://support.Lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806

    The program showed that my ssd was running firmware version 1.29 and that he did not need to be updated.

    I also tried to update the x 200 to the latest version of the BIOS. Nothing seems to work.

    Any ideas or suggestions are greatly appreciated.

    Windows 7 does not start a compatibility. I solved the problem by returning to a mechanical drive.

  • Re: Equium A210-1AS - blue screen and cannot start

    My computer was working fine, I stopped him, the next time I start up, it shows windows loading screen, then a second a blue screen flashes by, it restarts and repeats, I stopped and began to tap F8 until the advanced boot options appears, safemode ect... None of them work and lead all the blue screen If I select the repair option at the top 'Repair your computer' it begins to load with a background of vista and a cursor and then displays the error "the installed program cannot start. Click OK to turn off the computer. »

    in Advanced Startup Options that I try "disable automatic restart in the event of system failure" and the rest of the blue screen to the top, so I can see, it shows an error on usual blue screen, read:

    UNMOUNTABLE_BOOT_VOLUME
    STOP: 0X000000ED (0X85DDA600, 0 X 0000000, 0XC000009C, 0 X 0000000)

    I don't have a recovery CD, as I believe, there is a recovery partition, but I don't know how to access it-
    I use Equium A210-1AS
    Part number: PSAFJE-005005KS
    Windows vista 32 bit

    Thank you

    I know know that the recovery partition is consulted theough 'Repair your computer' but shows just "the installed program cannot start. Click OK to turn off the computer. »  :/

    null

    > I don't have a recovery CD as I believe, there is a recovery partition, but I don't know how to access to this

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=58

  • (P50) Blue screen during the BIOS update

    Hello

    I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

    (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

    But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:


    Your PC rann in a problem and must restart.
    We are just collection that some info of the error, and then we will restart for you (xx % complete)

    If you want to learn more, you can search online later to this error:

    System_service_exception (TdkLib64.sys)

    A google search gives no results.

    Comment to Moderator: Fixed URL.

    Nice day.

    I'm sorry that I can't help with the problem you are experiencing using updater .exe.

    If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

    I hope this helps a little.

    Kind regards.

  • I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

    I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

    Hi KevinRy,

    Welcome to the Microsoft Answers site!

    Unplug all external devices.

    Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

    Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

    1.

    Right-click my computerand then click Properties.

    2.

    Click the Advanced tab.

    3.

    Under Startup and recovery, click settings to open the Startup and recovery dialog box.

    4.

    Clear the automatically restart check box, and then click OK many times necessary.

    5.

    Restart your computer so that the settings take effect.

    Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

    Please reply back with the error message you get because it helps us to resolve the error.

    Kind regards
    Amal-Microsoft Support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • reformat and reinstall Windows XP but get the blue screen on the windows configuration page

    I'm trying to reformat and reinstall Windows XP on my Dell XPS400, but I get a blue screen on the Windows installation page that says... A problem has been detected and Windows has shut down to prevent damage to your computer.  How can I make this?  I want to give this computer to my grandchildren.

    Hello

    1. why you try to reinstall Windows XP?

    I suggest you to try the steps below and check if they help to resolve the issue.

    Configure your computer to start from the CD-ROM drive. For more information on how to do this, refer to your computer documentation or contact the manufacturer of your computer. Insert your Windows XP installation CD, and then restart your computer.

    a. when the message Press any key to boot from the CD appears on your screen, press a key to start your computer from the Windows XP CD.

    b. press ENTER when you see the message to install Windows XP nowand then press ENTER is displayed on the Welcome to Setup screen.

    c. do not choose the option to press R to use the Recovery Console.

    d. in the Windows XP licensing agreement, press F8 to accept the license agreement.

    e. make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.

    f. follow the instructions on the screen to complete the installation.

    See the following link for more details on the repair facility:

    How to perform a repair of Windows XP installation, if a later version of Internet Explorer is installed

    Hope this information is useful.

  • computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

    computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

    Hello

    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?

    Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

    To do this, follow these steps:

    1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
    2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
    3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
    4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
    5. at the command prompt, type the following command and press ENTER: cd system32
    6. type the following command and press ENTER: chkdsk /r /p
    7. remove the Windows XP CD in the disc drive.
    8. Type exit to restart your computer.

    Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

Maybe you are looking for