Blue Screen Atapi.sys - continues to come on start up...

Similar Questions

• Computer has a blue screen crash about 5 minutes after each start up successful

  Computer has a blue screen crash about 5 minutes after the start of successful with the error msg: Stop 0x0000008E (0xc0000005, 0xb7e4571d, 0xb1440748, 0x00000000) Atapi.sys-address b7e4571d base at b7e3b000 datestamp 48025396. Any help is appreciated.

  Hi jason12685,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Possible causes of this error include the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  Method 2

  I would also say that you update all the drivers for hardware devices on the computer by visiting the manufacturer of the computer or the device manufacturer's Web site.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Portege R700 3G - blue screen WwanUsbMp.sys

  Hello

  We have two Portégé R700 (first part no PT311E-01G01JEN) bought 2 months apart, but both with the same problem. All of our other laptops of the same model running Windows XP and do not have this problem.

  Windows 7 32 - bit freezes or blue screening at all times when it is connected to 3G in Ericsson device using the. Blue screens give a message "IRQL not less or equal to" and creates a crash dump file that points to a problem with WwanUsbMp.sys

  Both machines above using the standard image of Toshiba Windows 7 that comes pre-installed. Both have the Citrix DNE for Windows 7 installed [(see here) update | http://www.citrix.com/lang/English/lp/lp_1680845.asp] and the Cisco VPN Client v5.0.07.0410.

  A laptop computer uses the 3G of the image of Toshiba driver, while the other has been upgraded to the latest version available from Toshiba.

  The problem is persistent, and led to an accident, after which it either from 2 to 20 minutes when it is connected to a 3G network, but is yet collapsed when connected via GPRS or EDGE, although he made a blue screen after the computer was put into hibernation when you are connected to the GPRS on one occasion.

  Forums for other manufacturers show problems with this particular Ericsson device state to update the firmware, but as an OEM device, the firmware must come from the manufacturer of the laptop and Toshiba claim there is no all available.

  Has anyone else seen this problem? Any suggestions?

  See you soon

  Andy

  Hi mate

  Have you tried a pilot 3G update?
  You can find it on the European driver Toshiba page.
  Currently, there is a 3 G Driver v r2y04 out to the 28/09/10.
  Please check if you can use this new driver

• Blue Screen iastor.sys, STOP; 0x0000008E (0xC0000005, 0x828490B8, 0xB96DA758, 0x00000000)

  iastor.sys - address 828490B 8 physical memory base to @8280B 000, Date Stamp 48054343 - Crash Dump, dump - the disk of 100 I can work only in Mode without failure, but I can't print or scan that I need to do. Someone can help me.

  Hello

  Looks like you need to update iastor.sys:

  iastor.sys = Intel Matrix Storage Manager driver - see System/card mother Maker and manufacturer of chipset.
  This driver could perhaps was pushed to the fault by other programs such as Symantec/Norton.

  This driver is extremely difficult to install if you need system or the manufacturer of the motherboard (for custom
  bed systems) help but you could also ask on their forums (if any).

  Also check the Intel downloads audit AFTER with the system/motherboard manufacturer...

  Intel downloads
  http://Downloadcenter.Intel.com/

  Intel Matrix Storage Manager - do not forget to check DATE and set for the version of Windows and chipset
  http://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=%22matrix+Storage+Manager%22

  More help on installing iastor.sys here (System Maker/card mother Maker first consult and use that as a last resort).

  http://social.technet.Microsoft.com/forums/en-us/itprovistadeployment/thread/98f123d4-9190-4169-A376-7a0caf0ffb2a/

  ============================================================

  More troubleshooting if necessary:

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------------------

  Two main causes of this blue screen video drivers and BIOS - check with the system manufacturer
  Site for graphics (Video) card and BIOS, then on site of the manufacturer of the device for the last video. It may be
  other pilots to check there. Disable the installation of self as those who are older and if
  Updates Windows suggests a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates that an unaligned data reference was encountered.

  • 0 x 80000003: STATUS_BREAKPOINT indicates that a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved.chk, which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  BCCode: 8th 0x0000008E is the same as 0x1000008E<-- read="" this="">
  * 1151.html? order = date http://www.faultwire.com/solutions-fatal_error/kernel-mode-exception-not-HANDLED-0x0000008E-

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens. (If necessary)
  
  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info to blue screen
  This would help. Such as ITC and 4 others entered at the bottom left. And another error
  information such as the STOP codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How to solve a bucket of blue screen - 0X9F_3_POWER_DOWN_IMAGE_RTKVHDA.sys, type 0 "error

  MY desktop HP 6610 t reset rather than close down and shows like "Driver Power State Failure". If the screen blue bucket 0X9F_3_POWER_DOWN_IMAGE_RTKVHDA.sys, type 0 "

  The RTKVHDA.sys seems to be in question:

  0X9F_3_POWER_DOWN_IMAGE_RTKVHDA.sys, type 0

  The RTKVHDA.sys is the Realtek High definition audio drive so uninstall the current sound driver and download and install the most recent: available from Realtek:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false#high

• Blue screen Atkikmpag.sys - nothing is working, not even clean install

  I get the blue screen of death nearly a month.  Have tried to install the old drivers, as happened after an update.  The problem is that the original drivers required one. NET framework, which is to use the update, which means that windows downloads new drivers, the error message is an Atikmpag.sys, 116 problem.  I reinstalled Vista itself.  can you help me?

  BCC116 may be related to the video driver, vram, heat, the map itself, low power supply.

  We would be happy to take a look if you have downloaded the DMP files as below.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  If you are overclocking STOP

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  Please follow these instructions to collect data against crashes and upload them here, to your Skydrive or a service such as Rapidshare file sharing.

  http://www.SysNative.com/forums/showthread.php/68-blue-screen-of-death-%28BSOD%29-posting-instructions-Windows-8-7-amp-Vista?p=303&viewfull=1#post303

  http://SysNative.com/0x8/BSOD_Windows7_Vista_v2.64_jcgriff2_.exe

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the contents of this folder
  Please, upload to skydrive or a file sharing service and put a link to them in your next post.

  Go to start > search/run > cmd > msinfo32 and include it in the upload

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  http://www.SysNative.com/forums/showthread.php/325-BSODs-but-no-dump-files

  http://www.osronline.com/article.cfm?article=545

  Please also go to start > run > msinfo32 and record the results.  Send it with the DMP files, thank you.

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP ProBook G2 450: get crash with blue screen ((rtwlane.sys) driver_irql_not_less_or_equal message

  When I use internet through Wi - Fi some message crash put in time with blue screen (driver_irql_not_less_or_equal (rtwlane.sys), my adapter Wi - Fi is Realtek RTL8723BE 802.11bgn (new version) how can I solve this problem? please help me...)

  Wireless 802.11b/g/n Realtek RTL8723BE/RTL8188EE LAN drivers

  By downloading, you accept the terms and conditions of the license agreement for the HP software.
  Note: Some software requires a valid warranty, current support contract HP or a fee.

  Type:	Driver - network
  Version:	2023.9.401.2015 Rev.A (21 may 2015)
  System:	Microsoft Windows 8.1 (64-bit) | See all
  Name of the file:	sp71432.exe (35 MB)

• A blue screen: tcpip.sys + 8941c

  Hello

  These days, I am not able to use my laptop (Pavilion dv6t 1200, OS - windows Vista Home Premium 64 - bit OS) for more than 5 minutes, I get a blue screen with below information and have restarted.

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 16393

  More information about the problem:
  BCCode: d1
  BCP1: 0000000000000000
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1

  However, I am able to boot in safe mode, after analysis with Olivier tool see problem is related to tcpip.sys + 8941c.

  I didn't have any created recovery disk to recover the system.

  Please provide information solutions for this problem

  Hello mepramodkadam. I see that you are having problems in Windows. It seems you get a screen blue after a few minutes of use, - is this correct? However, you are able to boot into SafeMode very well?

  For me, that means there is something wrong with one or more of the system files that are used to start Windows normally. I think that a system restore or recovery is the best option for you. Fortunately, you don't need the recovery disc for this process. HP integrates the tool in the laptop for such a situation.

  First try to restore a Microsoft System. The reason why you want to try this first is because this will keep your files intact. If it fails the next step is a complete recovery.

  1. Shut down your laptop.
  2. Turn on the laptop and press F11 until the Recovery Manager starts.
  3. Select "Microsoft System Restore" and follow the instructions
  4. Once the restoration is complete, verify that the problem is resolved.

  If this does not work, go ahead and perform a restore. Back UP IMPORTANT DATA, IT will BE LOST.

  1. Shut down your laptop.
  2. Power and tap F11 until Recovery Manager starts.
  3. You will receive an option to backup your data, I suggest you only do this if you need to save anything to the laptop.
  4. Allow the recovery of finishing and to verify that the problem has disappeared.

  Just a final note.  You can contact HP to get physical copies of the recovery as a solution to backup discs in the future.  Call the 1-800-474-6836 if you are in the Canada or the United States.  If you are outside this area, go to the HP support site to get contact information for your region.

• Blue Screen Atikmpag.sys 0 x 116 Win7 Ultimate X 64

  Hey all,.

  OK, so after a few weeks of troubleshooting and no chance of finding a solution, I thought I'll try to ask someone for help.
  I get the BSOD atikmpag.sys 0 x 116. It started a week after I installed my ATi video card 7970 replace my 5970 who died. The only problem is that sometimes prob once per day to the maximum, or approximately every 8-12 hours. No matter if I play a game or the computer is sitting idle doing nothing. When he wants it just crash it.
  The system ran without a hiccup since 18-19 months so far. Here is my card
  ASUS P7P55D-E Premium Motherboard
  Intel i7 870 OC @ 4 GHz
  ITS ATi 7970
  Thermaltake Toughpower XT 875w PSU
  8GB Kingston HyperX DDR3 (KHX2000C9AD3T1K2/4GX)
  1 HARD WD Green of TB drive
  SB Fatality Pro Sound Card
  BR Samsung drive
  Here's what I tried to do so far to solve the problem
  Drivers - Cleansweep. Tried to use CCC 12.3 and 12.4 (no other don't support my card) has also tried the drivers from the manufacturer's CD
  -Ran Mem test and chkdsk no abnormalities not detected
  -Replace all the Ram, nothing has changed
  -Reset all the bios to the factory settings and no change
  -MB update for the latest version of the Bios
  -Replace the video card without change. (Also tested the 7970 in another machine with the same card and no crash no more)
  -Bought a processor intel SSD 520 series 120 GB and installed a new copy of windows. (12 hours later I installed Skype and got the blue screen during the installation. Ran it again all right)
  Because of the time between BSOD, it has been difficult to quickly diagnose what worked and what did not. If it isn't a major issue in most cases, since I still have the function of pc for most of the time, it would be nice if it didn't happen at all.
  Really, I guess I'm down to replace the motherboard as a final solution that I really don't want to do this now because I don't have a spare part which means I have to go buy a new one and always have the risk that it cannot be the issue. The only other thing I can think is that it is just driver related and I have to wait and hope that maybe ATi next version fix the issue of CCC
  Someone at - it ideas?
  Thank you
  Dominik

  Hey TorrentG,

  After this first dump file, I had updated all my drivers on a new install of win7
  PCTools was my anti-virus software. I only installed the drivers for all my devices and no extra software on my new install of windows and it was still giving me the BSOD.
  After replacing almost all of my material, I was always getting the same question.
  Tried the beta version of 12.6 and not a crash since. Machine worked 24/7 for 12 days per incident.
  Thanks for taking a peek anyway.
  DOM

• Windows crash - big blue screen with a sad smily comes then it reboots sometimes

  Hi all, I bought an acer Aspire V3 - 772G with 8 windows pre installed. the thing is while in the middle of something, a blue screen appears just saying that your pc just came across a problem, gives error names such as IRQ_NOT_LESS_OR_EQUAL, look for this error on the internet later... This has been driving nuts me lately. I thought that the problem was with windows 8, so I've upgraded to windows 8.1 but still sometimes. How the hell can I solve this problem? all of the suggestions. What exactly is the problem? any help is appreciated in advance.

  After spending about $ 1,000 on the computer I wasn't expecting this kind of errors.

  Thank you.

  Yes, too common.

  as suggestion, if you are still under warranty, call Acer customer service, probably isn't a hardware issue.

• The blue screen with stop continues to appear randomly and everything closed options.

  using screen blure xp2000-The windows guard poop upward and it stops even the task manager.it destroyed my work and everything is open :( Can someone tell me how to stop this blue screen please?

  sounds like a virus.

  first things first - make a complete AV scan - then download superantispyware and do a full scan.

• Why my computer is being a "blue screen" when not in use (can be started Windows 7 very easy) why the blue screen?

  How to stop the computer to go to "blue screen" when not in use. In other words, how can we not shut down the computer for a ~ 10 hours?

  Arthur

  Please keep all your messages on the same topic in the same thread / conversation.

  Click on the following link to access your profile

  http://answers.Microsoft.com/en-us/profile/798d7b71-764c-E011-8dfc-68b599b31bf5

  Click Edit profile and check the box in front of notification by e-mail.

  A suggestion if you are using Internet Explorer 9, 10 or 11.

  Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

• Blue screen on Satellite P30-130 at the start

  Dear friends,
  I have buyed a Satellite P30-130 (PSP30E-20E019IT) about 4 years ago.
  2 months next to the date when I bought the laptop, I saw a blue screen in the start menu upwards or in the first five minutes that the operating system starts.

  In other circumstances, I see no message start and any sound message and if portable starting stuck with black screen.
  Support the customer in my area of toshiba didn't this year, all the possible solutions to this problem and the warrantly is finished and I can't use my PC.
  You know I can see to resolve this problem?
  On the HP site for other phones I can find a short list of possible courses and possible solutions (Bios, HD and so on).

  Can you help me?

  Hello

  Bluescreens can have different reasons so it s is not easy what causes this problem. Normally, Bluescreen related to drivers or a faulty hardware (RAM or HARD drive).

  But have you tried an external monitor now? Maybe the internal monitor is defective if you get a black screen.
  Check it!

  I put t know what you hear with customer support, exactly, but on the Toshiba site you can find a list of all authorized service provider. Call them and explain your situation. They can help you as they can order spare parts Toshiba.

  Good luck! :)

• How to fix blue screen Dxgkrnl.sys error?

  ==================================================
  Dump file: 061416-24320 - 01.dmp
  Crash time: 14/06/2016 01:51:11
  Bug Check String: THREAD_STUCK_IN_DEVICE_DRIVER
  Bug check code: 0x100000ea
  Parameter 1: fffffa80'0abddb50
  Parameter 2: 00000000'00000000
  Parameter 3: 00000000'00000000
  Parameter 4: 00000000'00000000
  Caused by the pilot: dxgkrnl.sys
  Caused by the address: dxgkrnl.sys + 6f63
  Description of the file:
  Product name:
  Company:
  Version of the file:
  CPU: x 64
  Plant address: ntoskrnl.exe + 73c00
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\061416-24320-01.dmp
  Number of processors: 4
  Main version: 15
  Minor Version: 7601
  Empty the file size: 276.320

  Please download at not more than five copies of your files to dump in the form of files shared your onedrive with a link here

  The dump file will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?

  Please download and run the display driver and download a copy of the report he produced on your OneDrive. To obtain a report all drivers Select Edition, select all followed by file, file format record selected Items.Text please.

  http://www.NirSoft.NET/utils/DriverView.html

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  For assistance OneDrive see paragraph 9.3

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm