Blue screen code BC 19

Similar Questions

• Here the details of the blue screen code: (0x84bc8e30, 0xc000009c)

  Looking for a few details to the BSOD codes as follows: * STOP: 0x000000ED (0x84BC8E30, 0xC000009C)

  Has been preceded by: UNMOUNTABLE_BOOT_VOLUME

  No new installation of equipment, etc... computer turned on just as usual and it is in a boot loop that would go as far as the Windows XP screen apearing load for about 5-6 seconds.

  By selecting the mode without failure or any other check-out option made no difference to the cycle...  I hit the F8 key and disabled automatic reboot, see blue screen info.

  I'm hoping not to reformat HD...

  Any help would be greatly appreciated. I don't have the Windows CD

  Thank you

  Here are some gibberish of Microsoft on this message:

  http://support.Microsoft.com/kb/297185

  Goggledygook: any text containing the jargon or particularly convoluted English which results because it is too difficult to understand or even incomprehensible.

  .. and here's my UN-gibberish that tells you how to create a CD from Recovery Console bootable XP in order to be able to run chkdsk/r (which sounds like a good idea):

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• Blue screen Code: 1000007e - unable to start

  original title: BSOD on Vista, can use in safe mode but cannot use normally

  When turning on my computer is loading on the screen of the user, it will also load profiles but shortly after to go on a profile, it will be the BSOD.
  It starts in safe mode, I did some tests for viruses, malware and spyware and nothing came.
  This happens every time that apart from the occasional windows got the message, after having clicked on search for solutions, nothing else appears and later, it blocks again.

  Data indicated:
  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057

  More information about the problem:
  BCCode: 1000007e
  BCP1: C0000005
  BCP2: 040E0002
  BCP3: A32C2C80
  BCP4: A32C297C
  OS version: 6_0_6002
  Service Pack: 2_0
  Product: 768_1
  Operating system: Windows Vista

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

• BSOD Shut-down on blue screen Code 9f

  I also encounter this everyday, several times, as the PC goes into sleep mode.  Here are the basic BSOD report:

  Dump File	Crash Time	Bug Check String	Bug check code	Parameter 1	Parameter 2	Parameter 3	Parameter 4	Caused by the driver	Caused by address	Description of the file	Name of the product	Company	Version of the file	Processor	Name of the computer	Full Path	Number of processors	Major version	Minor version
  031510-37343 - 01.dmp	2010-03-15 20:08:47	DRIVER_POWER_STATE_FAILURE	0x0000009F	0 x 00000003	0x86a18b60	0x80d8adb0	0x874462f8	Ntoskrnl.exe	Ntoskrnl.exe + d1574	NT kernel & system	Microsoft® Windows® operating system	Microsoft Corporation	6.1.7600.16481 (win7_gdr.091207 - 1941)	32 bit		C:\Windows\minidump\031510-37343-01.dmp	2	15	7600

  What is frustrating is that I have only one device (NIC) with a status of power tab and is disabled.  Also, when I did a search on the Internet for each of these four parameter codes reported, none of them have been found. I guess the stamped are perhaps the spell name of
  special devices in the order more likley to less likely candidate as the cause of the closure.

  It is an older machine, but all the drivers and BIOS are the latest available. (GigaByte 8I1000PE). I built it myself and there work very well under WinXP SP1 - SP3. Feeding is 550W. All cards are 'green', and less than half of the locations are full. MS has had a few KB patches for problems of closure. Installed, but no difference. Nothing wrong with my 4 GB RAM DDR800 Corsair, bonus either. I understand that there is a problem with NTOSKTNL.exe for over ten years.

  Other ideas that the few valuable I see here and on the TechNet site appreciated.  Curiously, however, most of the concerns has to do with laptops. Mine is a desktop - which should have far fewer problems of POV material.

  THX.

  P.S. If anyone really wants another 10 pages of dump diagnostic, let me know.

  Hello

  This answer is for Vista and Windows 7, but XP is very similar. If you need specific
  See the XP forums XP Help.

  XP answers forums
  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  This "might" be a power problem, even if it's not the most common cause.

  9F is probably a driver issue. Security/antivirus/antispware programs can also cause these issues.
  Have you added the recent devices or the updated drivers - don't forget to check in the Windows updates to see
  If a driver has been updated before this happen. This can also be caused by a loose card or cable
  and even a weak power supply.

  This error means that a driver does not properly support the power state. Check in Control Panel - device
  Manager to ensure that the drivers are not stop during sleep - double-click adapter - NETWORK adapter
  and WIFI - healthy and others - tab power management - uncheck allow the computer to turn off.
  Maybe the only has a problem.

  Start - type in the search - find MSCONFIG in top - right, click on – RUN AS ADMIN

  General tab - tick this box start Diagnostic - APPLY / OK - REBOOT

  Try it now. If the computer still blue screens thinks that video driver. Otherwise think the card NETWORK, Wifi, sound, or...
  (and it might still be video interacts with something else). See following message for my
  generic driver update methods.

  BCCode: 9F 0x0000009F
  * 1167.html? order = date http://www.faultwire.com/solutions-fatal_error/Driver-Power-State-Failure-0x0000009F-

  MyEventViewer and BlueScreenViewer utilities may provide additional information to help.

  ==========================================

  To solve the problems of the side sleep/wake extended.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation
  http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  May need to reset all to default power settings and then place back as you prefer.

  ===========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blue screen code description on an accident that keeps reocurring.

  Don't know if this has nothing to do with it, but I had to reinstall Vista on Toshiba operating system about a month when I was unable to get opening windows.  I never had this problem at all with the original installation.  Microsoft has a fix for this problem?  It is extremely annoying.  Vista has had a recovery all but it happens every two or three hours of operation.

  Hello

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Blue screen Code 116

  Sometimes Windows will be blue screen itself, hardware check OK, can someone tell me is - what the problem come?

  any update office 2013 will make this happen once running in the moment?

  
  

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               116

  BCP1: FFFFFA800657D0F0

  BCP2: FFFFF88004A3DCB0

  BCP3: 0000000000000000

  BCP4: 000000000000000C

  OS version: 6_1_7601

  Service Pack: 1_0

  Product:                                               256_1

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information, please read this blog 
  http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

  blue screen code error 0x0000007e

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

  http://support.Microsoft.com/kb/953356

  Or more articles in this search:
  http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

  Hope one of these AIDS. QQ learn manage!

• Satellite L650-0E8 - blue screen so reinstall Windows?

  Hey,.

  I have a Satellite L650-0E8 running Windows 7 Home Premium pre-installed delivered. The occasional BSOD has turned up I read elsewhere that less than a probloem with Windows 7 because it is easier to trigger. With this information, I've neglected a few crashes. Recently, it happened more often, twice a day this week.

  I have not done the changes in material purchase and changes in windows only were regular updates. I ran the two HARD disk and the memory of the controls, both returned without problems.

  I'm happy to return to factory settings I have my saved documents but do not receive a Windows with the computer, is disc - this necessary or there at - it another way around the problem or reinstall windows?

  See you soon

  Hey Buddy,

  What blue screen code, you get exactly?

  Of course you can reinstall Windows and it s especially the best way to get rid of these bluescreens. Best option is that restore you the factory settings recovery option of HARD drive as described in your user manual. Windows will be automatically reinstalled with all drivers and tools.

  But I would recommend first creating Toshiba Recovery disk before you start the recovery of HARD drive. In which case it would go something wrong you are on the safe side because the recovery disc can always restore the factory settings on a new HDD without Windows.

• Blue screen in normal view. Safe mode œuvres

  Windows Vista Edition Home Premium. Toshiba laptop. To start in normal mode, can't seem to connect, but then after a few moments, 10-20 seconds or so the PC will be blue screen codes 0x0000008E 0xC0000005 0x862721A7 0xACA6591C.

  Can boot into normal mode, with networking. However, many things do not work properly. System restore fails with the error message "system restore failed due to an unspecified error. "The parameter is incorrect (0 x 80070057) '. Event logs have stopped updating. Try to directly access gives the error message "Event Viewer cannot open the newspaper...". The request is not supported (50). Old newspapers can be read as if they are old newspapers registered, but even if the logs are renamed, new logs is not created. Windows Update does not open. New user accounts can be created, but then disappear. Time is right at the minute, but time keeps changing on reboot, it seems to be random. CHKDSK does not restart.

  Service event log Windows is running. There is free space on the hard drive. No hardware or software is installed or updated at the time of the occurrence of the problem. I don't have a Windows installation disc.

  If you are unable to Windows, try to go to Mode without fail (quickly press F8 just before the Windows splash screen appears.

  Please provide the following information:

  -Zip please the contents of the directory C:\Windows\Minidump

  -Transfer to the public area of a SkyDrive (https://skydrive.live.com) account

  -Post a link here so we can download it.

  and

  -Go to start and type "msinfo32" and press enter

  -When the utility opens, save a copy of it as an .nfo file and another copy in a txt file.

  -Zip them upward and download them to the Public to a SkyDrive (https://skydrive.live.com) account field

  -Post a link here so we can download it.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Use SkyDrive to upload collected files:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Instructions courtesy of http://www.carrona.org/
  And http://sysnative.com
  More reading both.

• How to fix the blue screen?

  original title; How to fix blue screen of death?

  our computer says fatal system error and I don't know how to fix it.

  I tried all the suggested in the forums, I met online, but they didn't work [including restoration, safemode, last good known, etc.]
  can you help me please?
  [We have Windows Vista and I don't seriously how it happened since I'm not the one who used it last person admitted who did fact-_-]
  I would appreciate your help. Thank you

  Hello

  What is the BCCode or stop the blue screen Code?

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

• Vista 34 bit refused to stop. Said driver power state failure with a blue screen.

  Hi ppl,

  Please see if you can help. I tried to open the mini dump but file that you can't open.

  Hi singhamalai,

  1. don't you make changes before the show?
  2. do you get an error on blue screen code?
  3. have you installed any Bluetooth device on the computer?

  This looks like a device driver is causing the issue.
  Try these steps and check the result.
  Step 1: Check the observer event logs to see what exactly is causing this issue
  a. see what information is contained in the event logs? (Event Viewer)
  
  Step 2: updates from Windows to check to see if there are updates available for your device driver
  see automatically get recommended drivers and updates for your hardware .
  b. install the update just for your device and restart the computer.

  If you have any Bluetooth device installed, check out http://support.microsoft.com/kb/944054

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Design Jet 520 blue with code screen

  Turned on the printer and the blue screen with the code 805DFE31 on tried unplug power many time always comes back.

  What should I do?

  Hello
  
  Try to isolate the printer, remove another outlet, cable connectivity, print head, ink, and then the printer.
  
  If you still have problem, please replace the encrypted hand APC Kit (P/N: CQ891-67019)
  
  PartSurfer: http://partsurfer.hp.com/Search.aspx?SearchText=CQ891-67019
  
  It is my understanding that the new hand APC should come with the USB with the FW. Make sure it's there before to install the new main PCA.
  
  If problems with the FW, will not recommend you to use old USB with the firmware again.
  
  Thank you
  Rashed
  
  I'm not an employee of HP, but I am an engineer @ HP Partner and I share my knowledge of my own time.
  If your problem is resolved please click the button "accept as a Solution.
  If my answer was helpful, please click the 'Thumbs Up' to say 'thank you '.

• Strange problem code 39 on my Satellite A500-02J with constant blue screens

  I bought my Toshiba Satellite A500-02J 2-3 months ago and I opened my laptop this morning and I was not connected to the internet and had no installed audio device.

  Then I got a blue screen of death. I restarted my laptop and I went to the Device Manager to see that most of my drivers had the yellow exclamation mark with the super Code 39 error (windows didn't start my drivers for X reason...) and then I had a second blue screen. I was very careful from the beginning with this laptop and I know that this is not a virus since a did not something 'weird' with this computer. Best of all, it's that my USB ports no longer works and I can not backup my stuff important just in case...

  Thank you for helping me,
  Odin

  Hi Odin

  It is not easy to say why this happens, but if there are so many problems, I advise you to install the new OS by using the HDD recovery procedure.
  Try to start your computer in safe mode and delete all data on the second partition.
  Start your laptop with F8 install OS using these instructions - http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  When you install the operating system by using this method of HARD drive recovery all data saved on the second partition will not be deleted.

• Blue screen T430s-2352 and Code 101 problem

  Hi all

  By the use of a month of my T430s, I have met four times with BSOD(Blue Screen) and the two recent showed the same error message:

  Clock interruption A has not received on a secondary processor within the allotted time interval. And tstop code: 0 x 000000101

  Here is the screenshot:

  Link to photo

  When I use the "BlueScreenView" software to read the .dmp file, it says that it caused by the address "ntoskrnl.exe + 7f1c0".

  And these last two days, when I use Vmware workstation 8, playback of music suddenly blocked for a few seconds and my screen is frozen. I thought the BSOD to come again, so I stop doing everything with my PC but the music came back and went out on the screen. I think maybe the CPU is stuck again but not so severe to cause a BSOD. But I treat it as a sign.

  Moreover, after that I got my T430s, I did a lot of stability, exercise test, including premium 95, Furmark, MemTest Pro. But none of them gave me problems and my T430s survives at all. But the BSOD just happen randomly.

  My Config:

  I7 - 3520M with HD4000

  8G RAM

  SSD

  PS. I enabled Intel Turbo Boost before these two past BSOD.

  Can someone help me?

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  
  

• What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  What would cause a SQL server to blue screen with FFFFF81001BA5198 code

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer