Blue screen driver error less than stop: 0x000000D1

Similar Questions

• HP 14 r-226tx: blue screen driver error

  I bought the hp laptop 14 shopping. It is only 5 months old and I am faced with an error (error screen blue switch) that reads like driver irql not less or equal (rtwlane.sys) tried to contact hp well discuss but wasn't able to find products and it led me here. I contacted microsoft about the same mistake, and told me it's because of some of your drivers in question which does not enter their windows and propose to address manufacturing. The laptop is preinstalled with victory 8.1 and worked perfectly fine for about 3 months, but then the Blue error screen came. I ignored but eventually the error started coming more often. Although I don't want to update windows 10 but still I did think that it could correct the error. And it worked but only for a few weeks he started appearing again. I did not change any hardware or any software except for the windows updates and updates from hp support assistant. Please help me to the question of fixing.
  Name of the error - driver irql not less or equal (rtwlane.sys)

  rtwlane.sys is your Realtek driver wireless acting upward, go to the support page and use the button identify now to find the drivers of your page, once it be of course good that operating system is selected, and then look under 'Network' there should be a Realtek wireless driver, download and install.

  http://support.HP.com/us-en

• Computer stops with a blue screen with error fatal when the iPhone is connected

  I know it may not related to windows but I have tried other sites on this issue. My computer stops and a blue screen appears with the message saying fatal error when the iPhone is connected. I tried with or without iTunes installed.

  First without iTunes installed, windows will be asked to USB drivers for the iPhone, but I couldn't find anything on the Apple Web sites if I click No., a message appeared, saying that it might not work properly because he could not recognize my device. Second, I have the latest version of iTunes installed, windows began to recognize my iPhone but stop immediately after that with a blue screen fatal error and messeage saying updating the BIOS. Updated the BIOS of the computer, but nothing helped.

  My computer runs on Windows XP Home Edition SP3, processor Intel Core Duo 1'66 GHz, 2 GB Ram, Intel GMA 950, Intel 945 GM chipset.

  I thought that it requires no USB driver for iPhone on Windows or same iTunes unless I wanted to use it for synchronization or characteristics. Please forgive me if I'm wrong, because I tried it on other computers and it had no problem with the USB drivers and Windows can install by itself.

  Thank you.

  Hi 1980ckc,

  1. have you tried to connect the iPhone to a different USB port?

  You can check out the apple support link and check if it hleps:

  iPhone, iPad and iPod touch: Windows displays a blue screen message or stops when you try to connect to your device.

  http://support.Apple.com/kb/TS1502

  Also check out the apple discussion link:

  http://discussions.Apple.com/message.jspa?MessageID=10339681

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I log on my computer its is open for a minute and then a blue screen with error lights up and stops him. I can only log in safe mode of network.

  When I log on my computer its is open for a minute and then a blue screen with error lights and him stops

  I can only log in safe mode of network.

  original title: blue screen error

  If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup.  Finally, find the one that is causing your program to crash.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  "System Configuration Utility overview"
    <>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>

  HTH,
  JW

• blue screen with error code stop: 0x0000007e (0xc0000005, 0x805e492e, 0xf96793bc, 0xf96790b8)

  blue screen code error 0x0000007e

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/thread/901f9138-7a73-42f2-86ed-00c7fef3b77e http://support.Microsoft.com/kb/330182

  http://support.Microsoft.com/kb/953356

  Or more articles in this search:
  http://support.Microsoft.com/search/default.aspx?mode=r&query=0x0000007E+XP&spid=global&catalog=LCID%3D1033&1033comm=1&Res=20

  Hope one of these AIDS. QQ learn manage!

• Satellite A350 - blue screen with error message

  At the start of windows7, I get a blue screen with error message 0 x 0000116.

  Can someone help please?

  It looks like a graphics driver is a troublemaker. Try to reinstall a graphics driver in SafeMode (f8 at startup). Read this article for more information:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/eb584685-6b8b-4ad7-B6CC-ae5ee78095fb

  It is for VISTA but should be the same for win 7 too.

• Blue screen with error message

  Product name: HP Media Center M7250n desktop PC

  Product #ED842aa-aba

  I get a blue screen with error messages asking if this is the first time I get the error and then at the end it says: it is dumping memory. I would wipe my hard drive and reinstall XP but my system is out of warranty and HP gives me a recovery CD. What are my options.

  Hello

  If you are looking to purchase a set of recovery disc for your system, you can visit the site http://www.restoredisks.com/.

  NOTE: This site is not the HP website and it's a third-party site where they provide the recovery for different computer manufacturers disk (they charge for discs).

• HP Pavilion dv7-2160ed - blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  Installed windows 7 - Ultimate (32 bit) and after that, I sometimes have a blue screen with error code: 0 x 00000003, 0x86FF8688, 0x86FF87F4, 0x82E2FEC0

  And I also noticed that some hardware is not installed to properliy:

  1 base system device:
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2384 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2384 & CC_088000
  PCI\VEN_197B & DEV_2384 & CC_0880

  Device base system 2:
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2382 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2382 & CC_088000
  PCI\VEN_197B & DEV_2382 & CC_0880

  3 base system device:
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C & REV_00
  PCI\VEN_197B & DEV_2383 & SUBSYS_3624103C
  PCI\VEN_197B & DEV_2383 & CC_088000
  PCI\VEN_197B & DEV_2383 & CC_0880

  unknown device 1
  ACPI\ENE0100
  * ENE0100

  unknown device 2
  ACPI\HPQ0004
  * HPQ0004

  Can someone help me with this problem?

  Thank you very much. There is a hard drive problem. With the seagate tools, we could solve the problem.

• Driver atapi.sys - address f76fd5f9 of the blue screen IRQL not less or equal "stop 0x000000D1"

  I have a computer shape I work which is formatted, but windows recovery is here.  I get a blue screen when you try to retrieve that computer indicating"Atapi.sys address F76FD5F9 Driver IRQL not less or equivalent.  The stop codes are 0x000000D1 (0x005300cc, 0 x 00000007, 0 x 00000000, 0xF76FD5F9, I tried everything reformat this computer but nothing works.)  I get just the blue screen.  Can anyone help?

  ginger957

  Hello ginger957,

  ATAPI.sys is the driver file for the drivers of storage system. It may be the hard disk that fails to give the stop errors. If you try another hard drive or upgrade the hard drive on another computer which results do you see?

• My computer randomly gave me a blue screen, the error message "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys).

  Original title: driver error

  They just showed me an error on my computer. I am currently running Windows 8. I was in the middle of games on Steam and my computer randomly gave me a blue screen. He told me that "DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys). It restarted and now I'm on that's fine, but I was wondering if there is anything I can do to prevent and what should I do to remove if it's going to be a recurring problem. Thank you.

  Here is a list of the help page instructions:
  «' ' ' Exact error message: DRIVER IRQL NOT LESS OR EQUAL (Wdf01000.sys)»»» "
  -Your program and Version: don't know what to put here.
  -Your operating system and Version Windows 8
  -Your browser and the Version of Google Chrome Version 28.0.1500.72 m
  -All soft/hardware you have recently installed or removed - None.
  -Any recent changes that have been made to the system - None.
  -What you did to solve the problem of Google there as the error message recommended, read a few results, thought I would ask here.
  Specification of the computer if necessary:
  HP - Sleekbook 15.6 ENVY "
  AMD - processor A10
  -DDR3 SDRAM
  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are if you are unsure if you are, you are not) a

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.
  
  
  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  You can learn more about BSOD here
  
  
  
  
  Team Zigzag3143.com  

• Windows keeps stops with the error message NOT driver IRQL less THAN or EQUAL

  Using Windows XP on the desktop. Have spent days trying to solve. Getting the message "new hardware installed" but I did not. Had recent power outages in the region. Also have Norton Security Suite, which recently has been giving me the popups that my RAM is too low, but I seem to have more than enough. Have done a few sessions with chat support online Norton with "recovery" distance as well, but the problem persists. Seems worse at night. I'd appreciate a few tips, like this is to destroy my PC.

  What is your computer brand and model?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

  There are better alternatives freeware to Norton for a user running Windows XP.

• Blue screen IRQL NOT LESS or EQUAL, stop 0x0000a

  I have a user on occasion and not all the time but when it docks / untie his Dell Latitude D630 from the duplicator it blue screens.

  Message is a level IRQL LESS or DIFFERENT with a stop 0x0000a code (0 x 00760079 0 x 00021600)

  Any thoughts?

  It turns out, it's has a driver problem and we have updated the driver and set. But thank you for your help.

• Bluetooth, causing the blue screen with error message: out of State driver

  Hello

  I am posting this in the other thread here but it was closed before I could solve the problem.
  Background:
  I left on vacation for 4 weeks and I left my computer.  When I came back, my computer was giving me the following problems:
  • Video playback of my SIN was rough and freezing - I fixed that by finding out one of the drives died on RAID-1
  • After 30 minutes, the computer would give me a Blue Screen of Death (BSOD) and reboot - I have updated every driver I could, each piece of software, update the BIOS and then finally solved the problem by updating the firmware on my boot drive: a Crucial 128 GB SSD m4

  These two problems have been resolved, but can be useful to understand the current problem

  Current problem:
  After trying to use the webcam for video chat via Gtalk or Skype, my Bluetooth Logitech MX5500 keyboard and mouse stop responding.  About 10-15 minutes after the call is completed, my computer gives a Blue Screen of Death with the message of STATE FAILURE of PILOT.
  The minidump file is available here, and I understand that the cause is due to my Bluetooth driver: http://dl.dropbox.com/u/30633232/052212-24429-01.dmp
  What I tried:
  • I've updated all the drivers available on the Asus site for my motherboard Asus P8P67 EVO, including Bluetooth and the BIOS driver
  • I've updated my HD Audio integrated system with the drivers available on the Web from Realtek site
  • I've updated all my drivers webcam and Logitech software
  • I uninstalled, restart and reinstalled my Bluetooth drivers
  • I have not matched and repaired my Logitech MX5500 keyboard and mouse
  • I uninstalled, restart and reinstalled both Skype and Gtalk for Chrome, Firefox and Internet Explorer plugin
  The ask:
  I'm out of ideas... would like to get the genius of someone on these boards help me please!

  The problem may be with the c:\windows\system32\drivers\sptd.sys:

  ******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  DRIVER_POWER_STATE_FAILURE (9f)
  A driver is causing an inconsistent power state.
  Arguments:
  Arg1: 0000000000000003, a device object has been blocking an Irp for too long
  Arg2: fffffa8009d73060, physical device from the stack object
  Arg3: fffff80004c093d8, functional device object of the stack
  Arg4: fffffa800e0c3190, blocked IRP

  Debugging information:
  ------------------

  DRVPOWERSTATE_SUBCODE: 3

  Nom_image: usbhub.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4d8c0c15

  MODULE_NAME: usbhub

  FAULTING_MODULE: fffff88008c06000 usbhub

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0X9F

  Nom_processus: System

  CURRENT_IRQL: 2

  STACK_TEXT:
  "fffff800'04 c 09388 fffff800'03502702: 00000000' 00000000'00000003 fffffa80 ' 09 0000009f d 73060 fffff800 ' 04c093d8: nt! KeBugCheckEx
  "fffff800 ' 04 c 09390 fffff800 ' 034a2e4c: fffff800 '04c094c0 fffff800' 04c094c0 00000000'00000000 00000000'00000003: nt! : FNODOBFM: 'chain' + 0 x 34050
  "fffff800 ' 04 c 09430 fffff800 ' 034a2ce6: fffffa80 '06cdf5b0 00000000'01642618 00000000'00000000 fffffa80' 097aa901: nt! KiProcessTimerDpcTable + 0x6c
  fffff800 '04c094a0 fffff800' 034a2bce: 0000034f 'c591e29e fffff800' 04c09b18 00000000'01642618 fffff800'0360 d 588: nt! KiProcessExpiredTimerList + 0xc6
  "fffff800 '04c09af0 fffff800' 034a29b7: 0000011a ' 68920ac3 ' 01642618 0000011 0000011a has ' 68920 has 32 00000000'00000018: nt! KiTimerExpiration + 0x1be
  fffff800 '04c09b90 fffff800' 0348feca: fffff800 '0360ae80 fffff800' 03618cc0 00000000'00000002 fffff880' 00000000: nt! KiRetireDpcList + 0 x 277
  fffff800'04c09c40 00000000' 00000000: fffff800 ' 04c0a000 fffff800'04 c 04000 fffff800 ' 04c09c00 00000000' 00000000: nt! KiIdleLoop + 0x5a

  STACK_COMMAND: kb

  FOLLOWUP_NAME: MachineOwner

  FAILURE_BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

  BUCKET_ID: X64_0x9F_3_btfilter_IMAGE_usbhub.sys

  Follow-up: MachineOwner
  ---------

  0: kd >! devobj fffffa8009d73060
  Object Device (fffffa8009d73060) is:
  Can not read information from nt shift! ObpInfoMaskToOffset
  \Driver\usbhub DriverObject fffffa80094ffa50
  Current PRI 00000000 RefCount 2 Type 00000022 Flags 00003040
  DevExt fffffa8009d731b0 DevObjExt fffffa8009d73bb0 DevNode fffffa8009d7b550
  ExtensionFlags (0 x 00000800)
  Unknown flags 0 x 00000800
  AttachedDevice (top) fffffa8009663880 * WARNING: unable to verify timestamp for c:\windows\system32\drivers\sptd.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\sptd.sys
  \Driver\ACPI
  Queue is not busy.

  I would say to uninstall the application that has installed the driver c:\windows\system32\drivers\sptd.sys, maybe it is Daemon Tools or Alcohol 120%.

  Then, uninstall the c:\windows\system32\drivers\sptd.sys - see "How can I remove driver SPTD on 64-bit operating system?" in the following link:

  http://www.duplexsecure.com/en/FAQ

  Similar question in the following thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/the-computer-has-rebooted-from-a-bugcheck-the/2a0b354e-4FEA-4349-b88f-eb4b10199380

• Qosmio X 300 - 13W displays a blue screen and 0 x 00000124 STOP error

  Hey guys and girls.

  I need urgent help with my new Toshiba Qosmio X 300 - 13W (British model) that I bought in December
  I chose to install the 64-bit Vista Home Premium on the computer and the slopes of big thing until I HAV a work of high intensity for it as a game or to have several applications running at the same time:
  The screen goes black and the sound begins to "jerk" (repeat in a very short loop for awhile) before crashing to a Windows blue screen
  The blue screen said he "detected a unsolvable material error" and the technical Ref of the error message is "STOP 0 x 00000124 (0 x 0000000000000000, 0xFFFFFA8008FE2030, 0x00000000B2000040, 0 x 00000000000800).
  Anyone else with the X 300 - 13w has this error or someone has an idea what to do.

  Thank you very much in advance.

  I think that goes to the GPU. It could be overheating.
  Download HWmonitor and run a game for 5 minutes with it running in the background and then go out and check what HWmonitor has recorded for the MAX GPU temperature.

  [http://www.cpuid.com/hwmonitor.php]

• Blue screen with error code * STOP: OX000000F4 (OX00000003, OX8A30X, 8A30F2680

  I get this error blue screen frequently on the pc, the problem occurs intermittently. There is no point. Please help me solve the problem and what is its cause. "THE PROBLEM HAS BEEN DETECTED AND WINDOWS IS SHUT DOWN TO PREVENT YOUR COMPUTER."
  A SYS OPR PROCESS A UNEXPECTEDBLY HAS EXISTED OR TERMINATED.

  STEPS-

  TECHNICAL INFORMATION

  STOP: OX000000F4
  (OX00000003, OX8A30X, 8A30F2680

  BEGINE PHYSICAL MEMORY DUMP.

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.
  * Zip up the copy.
  * Join ZIP archive to your message by using the button (attachments) "trombone".
  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.
  * On the Advanced tab, click Startup and recovery... Settings button.
  * Make sure that automatically restart is unchecked.
  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).
  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.
  * OK your way out.
  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32
  Go to 'file', 'save' and download the PDF is saved with the DMP
  (Instructions for XP, Vista, Win 7, Win 8)