Blue screen during installation of Windows XP on HP touchsmart 7320

I have a HP touchsmart 7320 with Windows 7 Professional 64-bit pre-installed.

I have to install Windows XP (32 bit) next to Windows 7, so that I can run a costly professional application which meets the incompatibility issues with Windows 7.

Compatibility mode makes no difference. Virtual PC and XP mode are broken during the installation of the application. So its a way for me to have a dual-boot with Windows 7 ande Windows XP machine.

When I am installing Windows XP (all versions-family, professional, 32 or 64-bit with original CD always) gives a blue screen with strange characters and the following STOP message:

| STOP 0X0000007E
(0xc0000005, 0xf748e0bf, 0xf78da208, 0xf78d9f08)

PCI.sys - address f748e0bf base at f7487000 datestamp 36d855c

I did a new Windows XP installation CD using nLite, "slipstreaming" of Service Pack 2 and AHCI SATA drivers I found here and they are proposed by this guide.

That seems to work for awhile, because the installation process went further. It passes the point where she was already giving the blue screen, but it gives blue screen in a later stage of the installation process and one other STOP message which is now:

Advertisement

Hello:

I have another solution for you.

First, go to your Windows 7 installation and in Device Manager, click on IDE ATA/ATAPI controllers section.

Please confirm that you have the Intel (r) Desktop/Workstation/Server Express Chipset SATA AHCI Controller.

If it's not the ACHI SATA controller you have, thanks for posting what you have.

Now, here is another method to install XP.

Go into your BIOS. Go to the menu of storage options. Change your SATA of ACHI to IDE emulation mode. Save the configuration at this time by pressing the F10 key and save your settings again when you leave.

Now XP must install.

After XP is installed, please share back and I'll give you the instructions step by step to load the post SATA ACHI driver XP installation, so you can change your return to ACHI BIOS setting, so that you can dual boot your machine.

Currently, only XP will start with the value IDE BIOS. With the ACHI BIOS value, only W7 will start. That's why we need to load the drivers for XP achi sata once you have it installed.

I think that we can find all the XP drivers, you need to as well.

Paul

Tags: HP Desktops

Similar Questions

  • Blue screen during installation of Windows XP on my Touchsmart TX2

    Hey guys.

    l am trying to install Windows XP on my new HP Touchsmart TX2, but the startup configuration every time l, the Tx2 stops with a blue screen when loading drivers. l tried with several discs, even those created with nLite and understood the SATA drivers, but nothing has worked.

    Does anyone else have this problem?

    Thank you

    Nightmare

    @Nightmare,

    You need to integrate your drivers Sata (only x 86 drivers) with nLite.

    Here are the Sata drivers for you. Just unRAR it drivers with Winrar. (This driver is different then what gave you Cheryl.)

    Here you will find the file .doc with guide how to integrate this with Windows XP Sata driver. (You will need to open the Microsoft Office).

    Here you will find the file with the same guide *.pdf . (You must open the Acrobat Reader software. Download link for this program here. Select your language and your system it.).

    Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

    In nLite, you can even burn your new XP CD with these changes.

    I hope this will solve your problem.

  • Blue screen during installation of Windows XP from loading

    Hello...
    I am trying to install windows xp professional...
    I'm starting the cd and when windows start to load the tool installation only a blue screen and I have to restart... I tried with another CD and did not work
    is that a block is not install an earlier version of windows media center?
    (my system is Windows XP media center (from recovery cd))

    TKS

    Hi Alex

    Please write us which model of laptop you have. You've improved some hardware components? Is an external device connected to your unit while you try to install the OS?

    Usually each laptop comes with WXP MCE can be preinstalled with Windows XP Home edition. The drivers are the same.

  • Re: Satellite L450D - blue screen during installation of Windows XP

    Hi, laptop just out of warranty and the HARD drive was crushed, no return allowed ups recovery so don't not on the new HARD drive installation.

    I installed the new HARD drive and began to install XP. Implementation of process gets to the point where windows will write the files to the HARD drive and the blue screen appears! What is a SATA driver problem?

    Have tried with a copy of XP, I with the SATA drivers on it but don't know if it's a problem of controller or a specific driver from Toshiba.

    Any help would be appreciated... TIA

    Hey,.

    As you can read in 100 other discussions here in the forum, the problem is the SATA driver you need.
    As far as I know Satellite L450D a AMD chipset, so you can find the SATA driver in the display driver package that you can download from the official website of Toshiba.

    In addition, I would recommend reading the other discussions here in the forum. You can also read the son of other laptop models, it s always

  • Blue screen during installation of Windows 7 - 0x0800700b7

    blue screen with this error in installing windows 7 on dell

    Is this a desktop or a laptop?

    You are upgrading from a previous version of Windows?

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Also:

    If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • Satellite M70 - blue screen during installation of Windows XP

    Hello

    I bought a new M70 with Win XP HOME installed on it!
    but I want to install my Win XP PROFESSIONAL on the laptop.
    So I put in the CD WinXPpro and boot from the CD/DVD drive.
    The first blue screen with some information in the gray background of the line and every thing looks good, but the screen with the options on which drive I would install the windos OS is NOT COME!
    I have only a black screen and nothing happens!
    WinXPpro-CD is okay I checked it on other PC.

    hope you can help me quickly

    THX Houddy

    Hello

    I think I have a solution to your problem.
    The Satellite M70 was shipped with a SATA HDD and if you want to install the new OS you must first install the SATA drivers.

  • HP PRO 3405 series MT * blue screen during installation *.

    Hello

    I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

    I need drive for controller? (F6 at startup)

    Hello:

    See if these drivers work.

    You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

    http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

    Now you have to extract the real drivers, you must copy and paste to your floppy drive.

    Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

    http://7-zip.org/download.html

    After having extracted the file, you will find the drivers in the folder of the driver.

    Open this folder and copy and paste the drivers inside this folder on your floppy drive.

    If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

    Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

    If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

  • Stuck on "starting windows" screen during installation of Windows 7

    Hello

    I used windows 10 in dell inspiron13 7000 series. Now, I want to use windows 7 as for my personal use. When I try to boot my laptop with USB stick bootable, because I don't have cd player in my laptop. The problem is when I run the startup it stuck at 'starting windows' screen I can't go any further, so I need force shutdown my laptop. I am unable to install windows 7 on my laptop. What can I do, please help me.

    Thank you.

    Hi Praveen,

    Thanks for posting your question on the Microsoft community.

    We need more information about the issue so that we can help you better.

    1. is Windows 10 still installed on your computer or you have wiped the hard drive?
    2. don't you upgrading from Windows 7 to Windows 10?

    Thank you for details on the issue.

    If Windows 10 is installed, you can downgrade to Windows 7 within 30 days of the upgrade. If it crosses the 30 day limit, the option in the settings that allows you to return to your previous version of Windows will not be available.

    Please see this link:
    Return to Windows 7 or Windows 8.1
    http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

    However, if you want to install Windows 7 from an external installation media, you can re-create the rack installation of Windows 7 from this link:
    https://www.Microsoft.com/en-us/software-download/Windows7

    It is possible that the installation media does not develop properly. Please also make sure that you disconnect all the devices connected to the computer before installing Windows 7.

    Note: You may lose programs installed after upgrading Windows 10. I strongly recommend to back up your personal files and data on an external hard drive.

    I hope this information helps.

    Simply answer the required information and let us know if you need more help.

    Thank you

  • Download black screen during installation of Windows 7 from the disk.

    Original title: loading Windows 7 with windows 8 is already installed

    Dell computer brand new.  (Terrible dealer. They charge $ for help on something other than the material.)  The new computer comes with windows 8 is installed.

    Like any windows 8.  Ordinate of windows 7.  They sent the disc and no key.

    Dell will not help with installation unless you pay them $!  They say that it's a Microsoft product, and they are not obliged to help, even if it was purchased from them!  It's like buying a new washing machine or a car.  You need to contact the manufacture to get help with it?

    No, you communicate with the store, it was purchased from.  This applies to any new product I know. But not with Dell!

    Sorry for the rant.  I just found this totally outrageous situation.

    MY PROBLEM:

    Installing windows 7 from the drive, they sent.  Ten minutes into it the screen goes all black.  It is said that there is a file on the disk.  Also a button to continue.

    I stopped the installation and am at a loss as what to do...

    Thank you, Al

    Hello

    Have you checked to see if your model computer has Windows 7 drivers available from Dell for it?

    If not, it will not install properly or work properly.

    Dell:

    http://www.Dell.com/support/drivers/us/en/19/ProductSelector

    ___________________________________

    Have you changed the order of startup and boot the Windows 7 disc, they sent you?

    You press F12 in a Dell to change the Boot order

    http://en.community.Dell.com/support-forums/desktop/f/3514/t/19500812.aspx

    Then do a clean install:

    http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

    ____________________________________

    Or ask Dell to replace the disc if it is faulty.

    ____________________________________

    Or download the correct ISO file and make your own drive and use the product key that is on the sticker COST Dell sent you.

    http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

    And Neosmart has instructions on how to burn ISO disk images using imgburn:

    http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

    By using the downloaded ISO file method can require the Activation of phone.

    If it does require phone activation, do not follow Demand of Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

    "How to activate Windows 7 by phone '

    http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html

    The above method also requires that you go to your computer manufacturer's website > Support and downloads Section > locate your model number and operating system > then download and install the latest drivers for it.

     

    ________________________________________________

    Using the method of USB in conjunction with the Windows 7 download preceding:

    http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

    "How to get and use the Windows 7 USB/DVD Download Tool"

    http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

    See you soon.

  • Satellite A500 - 18Q - a black screen during installation of Windows

    Hello

    on my laptop Satellite A500 - 18Q when I install Windows I don't see the screen
    Only when I connect external monitor through HDMI or RGB.

    But when I install Ubuntu it looks exactly like the screen of the laptop.

    Anyone know what this may be?
    Spanish I m sorry for my English

    You see, when you start your laptop Toshiba welcome screen?
    You can enter the BIOS settings and see?
    You can enter advanced startup options (F8) and start windows in safe mode? Everything you see on the screen?

  • Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

    My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
    With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

    I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

    Can someone explain what I can do to start?   Thank you!

    Hello

    See the article below which might help you.

    You receive an error message "Stop 0x0000000A" in Windows XP
    http://support.Microsoft.com/kb/314063

  • Get windows error blue screen after installation Service

    I'm getting error " PAGE_FAULT_IN_NONPAGED_AREA_ (nischifk.sys)" blue screen after installing the VISION acquisition software in my OS Windows 10.

    I tried to install GO twice and got the same error.

    Awating for your valuable review

    Hi piZviZ,

    Sorry to hear about installation problems going TO that appeal to you. I guess you use going TO February 2014 or slightly earlier - can you confirm? There was a problem with one of the components, NEITHER FlexRIO going to understand which caused this exact problem on systems with a UEFI BIOS. We have since fixed the problem. If that were the problem, here are a few options:

    (1) install GO without Support IMAQ i/o for all cards of the R series (1473R, 8237R, etc.). This means that the affected FlexRIO component will not be installed.

    (2) update to a newer version of GO - I think that going TO August 2014 f1 shoots in the FlexRIO patched component that could solve the problem. If you choose to upgrade, I would recommend just upgrading to the last GO, if you are capable of: going TO August 2015 f1

    (3) keep the version of going TO you and patch the component FlexRIO: How can I get a blue screen after installation OR FlexRIO 13.1?, NI FlexRIO 13.2.0 Patch détails

    I recommend just update to the latest going TO if possible.

    Kind regards

    Joseph

  • Blue screen during windows of note

    Hello

    I tried to run the windows on my laptop, the vaio x Win7 with driver intel GMA500. When I got a blue screen during the process.

    The main line was PILOT NOT LESS NOT EQUAL.

    I should have the dump file, but I can't locate.

    Thanks in advance for any help.

    You may need to upgrade your Intel® Graphics Media Accelerator 500 card to something more robust. The updated driver for the device was scheduled for 2010.

  • Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

    Hi, I think I might have a virus.  Here are the symptoms:

    • I can't activate the automatic updates
    • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
    • I was able to run a quick scan of the Scanner for MS without problem.
    • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
    • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
    • I ran a chkdsk /r and no errors not found on my hard drive

    I searched the internet and I tried a few suggestions, but so far I have not made progress.

    I am running XP SP3 and I don't remember disabling the automatic updates.

    I am open to any suggestions, just some guidelines at this stage.

    Hello

    ·         What exactly happens when you try to activate the automatic update?

    ·         You receive no error message from error code?

    I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

     

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You can also view the article mentioned for more information below:

    You can not turn on automatic updates on a Windows XP Service Pack 2 computer

    http://support.Microsoft.com/kb/916261

     

    Note: The article also applies to Windows XP service pack 3.

    Let us know if it helps.

  • I get a blue screen in the main window to develop the module

    I just downloaded LR6 from CC Adobe on my new computer laptop > it worked fine on the old laptop, but now I have a problem. I imported the photos that look very well, but when I try to open on (one) in the develop module I get a blue screen in the main window.  The image appears in the navigator Panel. I use Windows 10, which I never used before LR.

    Lightroom preferences-> Performance tab, disable the GPU option. It may be necessary to restart Lightroom.

Maybe you are looking for

  • Just upgraded to 42.0 Firefox and background color setting doesn't work anymore - an empty window is always white.

    I just upgraded to Firefox 42.0 and, unlike previous versions, the setting of background color in 'Content' no longer works. In the settings page, the indicator 'Background colour' changes the color I choose (not white) in the choice of color theme,

  • Satellite P750 Gaming questions

    Hey guys, I've had my P750 for a month now and it is a great piece of kit, however, I get some problems with games. Im a hardcore gamer and im environment find on all the games I play theres at least one problem with the graphics card (everything is

  • DV6125 Power Switch failed

    For the past year, I had to press the switch further and further in the bezel at the top of the page in my DV6125 Pavilion notebook to turn on my computer.  It got to the point where I can no longer use my finger and have block a key or a coin on it

  • Compaq Presario CQ57-339WM upgrade CPU for Intel Core i3 2310 M?

    Can I upgrade the processor? : http://ark.intel.com/products/52220/Intel-Core-i3-2310M-Processor-3M-Cache-2_10-GHz He was given to me by the guardian after that I asked them if they had an available 988 PGA processors

  • How to place a (strict) reference of a cluster in a control of Type def?

    Example usage: for example queue message handler it is holding cluster of the references to the controls and lights on the front panel. I have a cluster of façade of type-def'ed, I need to add to this cluster of references. In the typedef for the con