Blue screen during the call

Similar Questions

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Turn off the screen during the call

  I'm working on an application BB10 requiring to be able to turn off the screen in the same way as holding it close to your face during a call. What can I use to deactivate and reactivate the screen?

  I solved this by adding a container around the outermost container in the hide/show of the container and QML file inside in response to proximity sensors readings.

  I posted a question and answer on Stack Overflow to explain it: turn off the screen during the call

• Please help - Virus? Can not enable automatic updates and blue screens during the virus scan

  Hi, I think I might have a virus.  Here are the symptoms:

  • I can't activate the automatic updates
  • MS Security Essentials blue-screens in an analysis complete (I can do a quick scan)
  • I was able to run a quick scan of the Scanner for MS without problem.
  • When you open Internet Explorer I always get "stopped unexpectedly" and it gives me a choice to go to the previous page or home page
  • I have AVG Antivirus but it was blue-screening during a scan, so I uninstalled and installed MS Security Essentials
  • I ran a chkdsk /r and no errors not found on my hard drive

  I searched the internet and I tried a few suggestions, but so far I have not made progress.

  I am running XP SP3 and I don't remember disabling the automatic updates.

  I am open to any suggestions, just some guidelines at this stage.

  Hello

  ·         What exactly happens when you try to activate the automatic update?

  ·         You receive no error message from error code?

  I suggest to reset the Windows Update components and check if the problem persists. Visit the following link and click on Fixit.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  You can also view the article mentioned for more information below:

  You can not turn on automatic updates on a Windows XP Service Pack 2 computer

  http://support.Microsoft.com/kb/916261

   

  Note: The article also applies to Windows XP service pack 3.

  Let us know if it helps.

• Blue screen during the installation of windows

  I was formatting my laptop, when the new windows (windows xp) is installed and during his stops starting and give a blue screen with the error, and automatically restart and the same breed bluse screen and restart. I tried to open the safe mode, but its revealing windows is not completely installed please pick up again. I tried four times back again with the same problem. Please help me...

  Hi AhmadDimassi,

  ·         What is the error it fails with?

  Check to see if the following is useful.

  Method 1: Unplug non-essential devices from the computer and restart the computer.

  Method 2: Try to select disable automatic system failure reboot since the options of start menu advanced to know the Blue error screen.

  a. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  b. use the arrows to choose to turn off the automatic restart in the event of system failure in the Advanced Options of Windows Start Menu and press ENTER.

  Method 3: Check drive for errors.

  Description of the Windows XP Recovery Console for advanced users

  Microsoft Windows XP - Chkdsk

• (P50) Blue screen during the BIOS update

  Hello

  I'm trying to update to the latest version of the BIOS, http://support.lenovo.com/se/sv/products/laptops-and-netbooks/thinkpad-p-series-laptops/thinkpad-p50...

  (Lenovo ThinkPad P50, (20-0007MS), Windows Enterprise 10, 64 - bit, build 10586, suspended BitLocker.

  But when the update starts and it comes to read current Bios, the laptop gives me just a blue screen and the error:

  
  Your PC rann in a problem and must restart.
  We are just collection that some info of the error, and then we will restart for you (xx % complete)

  If you want to learn more, you can search online later to this error:

  System_service_exception (TdkLib64.sys)

  A google search gives no results.

  Comment to Moderator: Fixed URL.

  Nice day.

  I'm sorry that I can't help with the problem you are experiencing using updater .exe.

  If ensure you that you need the update, you can try the boot disk method: http://support.lenovo.com/us/en/downloads/ds106109

  I hope this helps a little.

  Kind regards.

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Black screen during the call I phone 6 more

  BBlack screen while on a call to the phone I 6 more

  The screen is supposed to close during a call. As soon as you press it against your ear, the proximity sensor is turning off screen, in order to avoid "plays the numbering" or similar effects.

  If the screen is not active as soon as you lift the phone to your ear, check if the proximity on the top of the screen sensor is not covered by a protective film or the case, if you use one.

  Have you ever tried to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again?

  You won't lose data by resetting, but it can cure a few glitches.

  To make sure that it is not software related, set it back to factory settings, without using any data backup later. Set up the rest of the personal settings manually and test the phone.

  If the phone works again, restore the last backup. If the problem returns, the data backup contains damaged data, causing your issues.

  If this still does not work after that, get the phone checked for hardware problems by visiting an Apple store or Apple authorized service next to your site provider.

  Or contact the Apple Support to send it.

  Use iTunes to restore your device to factory settings - Support Apple iOS

  Find an Apple authorized service provider

  Apple iPhone - contact Support - support

• Blue screen during the startup or shutdown

  I have windows vista home premium.sometimes during startup or during shutdown, a blue screen appears for a very short time and the restarts.from of the computer, what I have seen during this short period his written dumping physical memory, etc as something is written on my BIOS.do I need to update my BIOS version or is there any other problem? Please answer soon.thanks.

  You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

  Consider the following general guidelines for dealing with bluescreens.

  Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

  Also consider running SFC/scannow.

  If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

  Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

  Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

  It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

  Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

  Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

• R310 Gets a blue screen during the installation

  I have a R310 failed with a blue screen. I tried to boot from the OS from Dell disk and do a clean install on the original hard drive and a new hard drive.

  Installation works normally but gets a blue screen at 10% or 20% (random) during file extraction.

  What is the RAID controller that is faulty

  any suggestions?

  THX

  Gavincr001.

  What is the stop code that is displayed on the blue screen? Also, you can check if the server is updated in the BIOS, iDrac, controller of life cycle, as well as the raid controller in the server? If some of them get obsolete now, it can cause stability problems. Let me know what the stop code is that you see and I will be able to better understand what is causing the problem. In addition, what is the OS you are using?

  Let me know.

• Blue screen during the Instalation of finishing

  Hey there,

  I tried to install Windows 7Pro on an old mobile phone to society with a free HARD drive.

  Everything worked up until the computer restarts automatically. During the process of "finish installation", a blue screen appears all the time and the computer restarts. the installation fails every time after that.

  The laptop is a Dell Latitude E6520 and the BIOS is updated to the last A19.

  hoping to get help,

  Thanks for the replies

  Its possible your installation media can be damaged or scratched.

  If you have any non essential devices connected to the computer, they might interfere with installation.

  What kind of way is to install Windows 7 from USB or DVD?

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Blue screen during the installation of windows 7

  Hi guys, this is my first question. I have a problem during the installation of windows. A blue screen saying is displayed "STOP: c000021a {fatal system error}.

  The initial session process or the process of the finished system unexpectedly with a status of 0 x 00000000 (0 xC0000001 0x001003f0).

  The system stopped"I can't do anything else than the computer shutdown. Please help me

  Could you provide your system specifications?

  Are the upgrade from a previous version of Windows or to do a clean installation?

  This is usually caused by hardware or software that is not compatible with Windows 7. If you have this problem, follow these steps:

  Uninstall all antivirus software, and then restart your computer. Don't forget to enable antivirus software after you install Windows.

  If the installation fails again, it may be a hardware incompatibility problem. Go to the Windows 7 Upgrade Advisor on the Microsoft website to see if your computer can run Windows 7.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  If the computer still stops responding during Setup, contact your manufacturer computer or your retailer.

• Re: Satellite L650-165 - blue screen during the video playback or games

  Hello

  In October, I bought my L650-165. However, since then, I was faced with the blue screen of death. This happens when either video playback, streaming video or play Football Manager 2011 (video game).

  I think that my problems are all the graphics card related. However, I am really at a loss. I've always used Tosh laptop computers but this problem starts to grate. I keep coming back to my trusty 5 years Equium!

  I'm not that great with Windows 7, so I would appreciate any pointers or possible solutions.

  Thank you

  Cess

  Hello

  I had the same problem with my a500 due to a graphics card driver. Try to update:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

• Qosmio G35-AV600: blue screen during the installation of Vista?

  Hello

  I have a G35-AV600 one I am trying to install windows vista.
  I followed all the instructions for the driver raid and all with pure install.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  I know that some people had the same problem since they were posted here but no solutions have been posted.
  Please if you have an idea how to solve this problem, help me, I'm desperate.

  Thank you.

  Hello

  We need more information to try to help you.

  As a first step:
  Have you upgraded your Qosmio G35 to be a Vista capable?

  BIOS available for download from the Toshiba Web Site:

  Version 3.30 25/01/2007
  Changed the BIOS to be compatible with Windows Vista.
  Added support for the digital tuner US OpenCable Unidirectional OCUR (Receiver). (Shut UP-PQG33U only).
  Additional requirements for Intel to improve stability when using the Intel Core 2 Duo as a single Core processor.
  FIX: A smart card containing a TI controller is always set to disabled.
  Fixed: Times wired / wireless LAN insured Wake-on-LAN functionality.
  Fixed: Ensure a remote to work Express Media Player.
  Fixed: Exclamation mark (!) appears when starting a model of TV tuner, while the RF switch matrix is turned OFF.
  Fixed: S3-wake question pertaining to the remote control mode. (Models Japan only with EC/KBC V1.10)
  It is the first version of BIOS for PQG33U models.
  This BIOS supports Windows Vista and XP.

  But my problem is that, after the first reboot, I get a blue screen with an error message.

  Would you please, let us know what is the error message when you have a blue screen?
  Report any information given at the bottom of the blue screen.

  Francisco

• Satellite A100-192: blue screen during the installation of Adobe Premiere

  Hi, I need some help ASP...
  I bought a satellite A100-192 intel duo 2500 T with 100 GB hard drive and 1024 MB 533 memorry also has a vga ATI 1600 hyoer 512 MB memory,
  Try to install the first pro, but I got a bluescreen scrable.
  Can this program somehow in this laptop? any help is welcome...
  Thank you...

  Hi Theodor,

  I suggest that you try to reinstall your copy of Adobe Premiere, and if you still get the blue screen when trying to take note of the error message, since this will give you some clues as to the nature of the problem.

  If the blue screen appears too fast and forces the phone to reboot then just right click on the 'My computer' icon and select 'Properties', then click on the "Advanced" tab and in the "Startup & recovery" section click the "Settings" button In the next under the title of "System failure" screen make sure that the option restart automatically is not checked.

  Kind regards